Unable to create system performance counter SharePoint Disk-Based Cache - SharePoint 2010 SP2 Farm

Hi,
I'm getting this in my Trace Logs:
Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME
PDH failure on counter <serverName>\Sharepoint Disk-Based Cache\Blob Cache hit ration with Unknown error (0x0000bc0)
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Blob Cache fill ratio
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Total Blob Size
There are bunch of them from SharePoint Disk-Based Cache counter that its trying to create but they cannot be used.
I've logged on to the server as a farm admin, which has full farm permissions, local admin and runs OWSTIMER.EXE service, but I was not able to add the counters myself. I've read few posts here on TechNet but no one answered on how to enable/recreate these
performance counters. I would like to resolve this if its possible.

I could not find the reason why those SharePoint Performance Counters were not on the WFE servers so I just disabled the "Diagnostic Data Provider: Performance Counters - Web Front Ends" in the Central Admin > Monitoring > Job Definitions.

Similar Messages

Unable to create system reserved partiton

Hello,
I buy new laptop hp brobook 450 g2 core i3 5th generation.
I am installing window 8.1 from usb 3.0 and unable to create system reserved partion because of this windows unable to install.
I tried a lot search in internet try all ways even run driver from load drive but I am fail.
New generation machine and 3.0 usb not working properly appreciate to hp.
I install window 8.1 in lenevo and in hp envy and other machine with usb 3.0.
usb 2.0 works fine in my new machine but 3.0 unable to create system reserved partition.
one thing I mentioned that I update my bios also.
there is an another issue reported by person but the support enggineer not reply second time or he will fail to solve the problem.If support engineer dont want to reply so kindly please close this support option please dont consider that people are fool.
Please answer me till my problem solve completly. I chat to the support but i didnt get any reply from there.
Thank you.

I could not find the reason why those SharePoint Performance Counters were not on the WFE servers so I just disabled the "Diagnostic Data Provider: Performance Counters - Web Front Ends" in the Central Admin > Monitoring > Job Definitions.

SBS 2003 SP2: VSS errors; unable to create system state backup (NTBACKUP)

NTBACKUP system state on W2k3 server fails after "thinking" for ~10 mins and "creating" shadow copy; almost no disk activity, almost no CPU load. Errors in the Application
log:
Source: SQLVDI EventID: 1
Loc=SignalAbort. Desc=Client initiates abort. ErrorCode=(0). Process=3392. Thread=29348. Client. Instance=. VD=Global\{9B35142B-C687-4766-9707-BC387534BA38}1_SQLVDIMemoryName_0.
Several of them.
Then:
EventID: 8019
Source: NTBackup
End Operation: Warnings or errors were encountered.
Consult the backup report for more details.
Then:
Source: VSS
EventID: 12305
Volume Shadow Copy Service error: Volume/disk not connected or not found. Error context: CreateFileW(\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy9,0xc0000000,0x00000003,...).
And finally:
EventID: 12293
Source: VSS
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details PostFinalCommitSnapshots({de0d580b-68ce-4eae-a046-b5b5b7a80235}, 1) [hr = 0x80042308].
When creating shadow copy on the system volume, the operation may take ~40-90 mins. On the data volume -- <1 min.
"vssadmin list writers" shows:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
State: [10] Failed
Last error: Retryable error
Writer name: 'SqlServerWriter'
State: [10] Failed
Last error: Retryable error
Writer name: 'MSDEWriter'
State: [1] Stable
Last error: No error
Writer name: 'FRS Writer'
State: [10] Failed
Last error: Retryable error
Writer name: 'NTDS'
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
State: [10] Failed
Last error: Retryable error
Writer name: 'Event Log Writer'
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
State: [10] Failed
Last error: Retryable error
Writer name: 'Certificate Authority'
State: [10] Failed
Last error: Retryable error
Writer name: 'WINS Jet Writer'
State: [10] Failed
Last error: Retryable error
Writer name: 'Registry Writer'
State: [1] Stable
Last error: No error
Writer name: 'Microsoft Exchange Writer'
State: [1] Stable
Last error: No error
Writer name: 'TermServLicensing'
State: [10] Failed
Last error: Retryable error
Writer name: 'WMI Writer'
State: [10] Failed
Last error: Retryable error
Here is what I tried to do:
1. Restarted that thing.
2. Cleaned the security log.
3. Installed Windows Server 2003 Hotfix rollup KB940349-v3.
4. Stopped both SBSMONITORING and SHAREPOINT instances of MSDE, SQL 2005, SQL 2005 VSS and tried to perform the system state backup then. Stopped Exchange 2003 before launching NTBACKUP as well.
5. "regsvr32 sqlvdi.dll" in MSDE directory.
6. Renamed "System Volume Information" on all volumes and VSS has re-created them.
7. chkdsk /f was fun on all volumes, no major issues found.
8. Installed Hotfixes KB967551, KB975928-v2 (someone recommended).
9. Disabled SQL Server VSS Writer (SQLVDI errors disappeared from the application event log, VSS and NTBACKUP errors stayed).
10. Re-registered the DLLs as per Shaon Shan's post at http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/346fa42c-a476-457f-bcf3-59f87e444b55
The above had no effect on the issue whatsoever, except a little change at item 9 as mentioned.

Hi there.
I just had that problem. I saw friday my backup from my sbs 2003, was not completing becasuse it said it couldn´t creat a shadow copy in the external drive... It kept giving me errors os VSS and Volsnap... But strange thing is, i have VSS turned off in all
drives, and from months no problems with backups... So i went in Event viewer and look at it with attention, i saw a error that keep coming up from time to time (because we change the external drive form week to week). And i realize that there's a disk error
event...
Couldn´t run checkdisk from server, dont now why.. So i disconnected the drive, connected to my laptop, and ran a CheckDisk /F /X. ... It had BAD SECTORS! So i ran check disk... waited like 10-20 minutes. And then i ran it again just in case, and the 2nd
time was much more faster, like 3-6 minutes.
I disconnected from laptop, and connected to server. I went to the Backup wizard (in server managment), and press Backup now...
It hang 5-10 second in Creating Shadow copy..... And it started making the Backup :_D
I've seen all errors that were reported exactly as mine. I ran the Hotfix, all stayed the same, i followed all manual steps and still the same... and the problem was always in the external drive, which had bad sectors.
Hope it will help the next person that needs this info!

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Unable to create system Alias.

Hi All,
I Created one system object , but i am not able to create system Alias.While creating system Alias it throws this error " This system object is restricted and u can't create System Alias". Exactly what is the prob?What is the solution?
Thanks in Advance.

Hi,
system object is restricted
1. Make sure you have required permissions to create the system object. You should use administrator user to create the system.
2. Check the object properties and permissions.
Refer following procedure to create the system object and see if you have missed any step.
http://wiki.sdn.sap.com/wiki/display/EP/11Systems-+Creation
Regards,
Varun

Unable to Create System from System template

Dear All,
I am planning to Integrate my Lotus Notes Web mail thru Portal(using SSO).
For that I have uploaded file com.sap.portal.howtos.webapp.par into my development portal, and created a System template , but When i am going to create System from that system template it is not visible.Kindly Suggest...
If is there any other solution for SSO to access lotus web mail.
Thanks & Regards
Manoj Sahoo

Sir/Madam,
I have created iView for my lotus web mail and set following parameters
System: WebMail (system alias)
URL template: http://10.80.10.20
User mapping template: username=<MappedUser>&Password=<MappedPassword>
But it is asking for login??
Pl suggest.
Regards
Manoj Sahoo

Unable to create RAID - "could not unmount disk"

I'm trying to create a concatenated RAID set from two drives. I can select the drives and individually unmount them using Disk Utility, and they disappear from the desktop. But when I try and create a RAID using the two drives, it tells me it can't because it is unable to unmount the disk.
Any ideas?

It appears that this is possible - in one case. If your system drive has been partitioned into multiple volumes, a volume from that drive can be used as part of a RAID (along with a volume from another drive) if you did not boot from the drive. Haven't tried booting from the Tiger DVD, but may just for fun. Follow all the other advise in this and similar threads though - don't expect a mirror (RAID 1) to provide back up and don't build a RAID 0 stripe using the partition that contains your boot OS.

Unable to create a new folder in document library of SharePoint 2010

Hi There,
Need some help regarding an issue which is occurring after migration from SP 2007 to 2010.
We have recently migrated a site to SP 2010, after migration whenever i tried to create a new folder in a document library it gives me an error message below
SPException: Can not find the form to create default data for the list
Microsoft.SharePoint.Utilities.SPUtility.ThrowSPExceptionWithTraceTag (UInt32 TagId, ULSCat traceCategory, resourceId String, Object [] resourceArgs) 28098007
Microsoft.SharePoint.ApplicationPages.ListFormRedirect.InitializeQueryStringMembers () 1764
Microsoft.SharePoint.ApplicationPages.ListFormRedirect.OnLoad (EventArgs e) +25
System.Web.UI.Control.LoadRecursive () 66
System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2428
All the document libraries which are created with the custom list template has this problem.
Moreover, I have verified and found Upload.aspx page is available in Forms folder of a document library.
Can someone help me in resolving this issue.
Thank you in advance.
Vikram
vikram padigala

Hi,
All the document libraries which are created with the custom list template has this problem.
Did you mean you had a custom library template?
Did the issue occur in the library which created use the out of the box template, such as use the Document Library template?
You can check with the OOB template library to test whether they had the same issue.
If the OOB template library works well, the issue may be related to the custom library template.
You can try to recreate a new custom template to check whether it works.
To quickly and accurately find the issue , you can also check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to Create Windows 8.1 Install Disk

Trying to get Windows 2.1 up and running on my early 2011 MBP. After downloading the Windows 8.1 .iso and inserting my 16 GB flash drive (which should be large enough), I open up Boot Camp the option "Create a Windows 7 or later install disk", that i see on all the youtube tutorials doesn't even appear.
I have tried everything, dowloaded the trial from Microsoft's website, burn the Iso fila into a CD...
But nothing makes the "Create a Windows 7 or later install disk" appear!

You can burn the ISO to a DVD (not a CD) and make sure you verify before it is burned. This is the recommended method. You need to ensure that the burn speed matches what the media will support.
Disk Utility 12.x: Burn a disk image to a CD or DVD
You can also verify if the ISO is complete using Microsoft FCIV tool.

Unable to create an universe on a query based on a real time cube

Hello,
I'm trying to create a universe on a BEx query. This query is based on a multiprovider which consists of one standard cube and one real time cube. I'm unable to see this query in the designer. I do see an empty folder with the name of the multi provider.
I can create an universe directly on this multiprovider.
Are there any specific setting for real time cube or is it a compatibility issue? Can an universe be created on a real time cube?
Regards,
Sameer

Hi Sameer,
Let me know if this SAP note helps: 1291966 - "Output Cache Directory" & "Enable Real Time Cache" options in Central Management Console

WAE 674 Disk based software not installed.

Hi,
Have an WAE 674 with 4.4.3c installed, with problem.
Using WCCP and I am able to logon to the device.
Have this msg and in in the CM it is down.
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
Any sugestion?
I have reload still problem.
Regards Jan Rockstedt

What steps did you take to resolve the issue? I have the same issue on WAVE 594 running 4.4.5.
I get the error message when I telnet into device.

Unable to edit .vsdx visio file that is inside a document library using visio 2010 sp2

I have Visio 2010 SP2 installed locally inside my machine. The current version can open vsdx files by doing some conversions. I got the following scenario inside my SharePoint server 2013:-
Currently I have Visio file (with .vsdx extension) uploaded to my SharePoint 2013 document library.
If I click on the Visio file I got the following dialog.
I select “Edit”, click on ok.
Then the visio 2010 application will convert the current file and open it locally inside my machine.
But the opened file will have it name as “Copy (1) of ….”, as follow:-
So if I do some changes to the Visio file and I click on save I will not be able to save my changes back to the SharePoint server’s document library. Now if I do the same steps for a .vsd file not .vsdx then I can directly open the Visio file (without any
conversion process) and I will be able to save my changes back to SharePoint server.
So can anyone advice how to be able to edit .vsdx files which are uploaded to SharePoint document library using visio 2010 SP2 ?
Thanks

Thank you for your ideas.
After that last posting, but before your response, I asked them to add the local farm to their trusted sites zone. Several blogs I had encountered while searching had listed that as something they had tried.
As soon as they added the site to their trusted site zone, the problems went away.
It was definitely not all users - I only had 2 people directly contact me about the issue.
I never got a chance to ask them about other SharePoint sites - they were working on the sites where they spent most of their time - I don't know if they had other sites.
The old location and the new location of these 2 sites are in the same site collection - it was moving them from
http://myfarm/sites/div/dept67/site1
to
http://myfarm/sites/div/dept64/site1
basically (with the actual names changed to protect my job).
The site collection is /sites/div . So the site collection features are the same.
I suppose that the site features could have changed between the export and the import - but since things are working now and I didn't change any features, I don't think that it is.
At this point, things appear to be working. However strange that seems to me.

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

Unable to Create a Disk Image of Device

Hello.
The MacIntosh is a Mac Mini w/1.83Ghz Intel Core 2 Duo. The OS is Snow Leopard, 10.6.2. I am unable to create a disk image of the device "Macintosh HD".
Here's my procedure:
1) Reboot the Mac Mini from the Snow Leopard Install Disk
2) Set Language and then load "Disk Utility"
3) Select the Macintosh HD from Disk Utility
4) Set "Create a New Image from Macintosh HD"
5) Leave the settings as they are (type of disk image is "compressed" target repository is root home dir)
6) Error message is "Unable to create Macintosh HD (error -61)"
7) When I then try to create a blank disk image, once again, with root home as repository the error message is "Unable to create name.dmg (read-only) file system"
Any suggestions how to fix?
Thanks
Mike

you can smb from terminal but it will not help you. you'll need to create a folder which will serve as the mount point first and where will you put it? you can not do it on the dvd. and you can not put it in the main drive itself. but why do you need to do it that way at all. there is no need to boot from the DVD period. boot normally and clone your hard drive to a remote disk image on an smb share using one of many backup programs that can do this. Superduper can do it. so can CCCloner.

Unable to create system performance counter SharePoint Disk-Based Cache - SharePoint 2010 SP2 Farm

Similar Messages

Maybe you are looking for