Unable to create the bluetooth virtual COM port

Hi all
I install BS from Toshiba and it seems ok. Bt ir desn´t work. I see all the drivers installed, system devices, etc. No Toshiba BT ports can be seen. Local com ports only show modem port. Try to create a virtual port but get a message "unable to create a bluetooh virtual port" I have a satellite m100-145. Can anyone help on this ?
thx

Thx for your suport.
I decide to reinstall windows and all software. Now it works.
The error was due to the fact that if you have BS from Microsoft (called bluetooth monitor) and you install the BS from Toshiba after that, even if you remove the BS from MS, the BS from Tos is unable to create the virtual com ports (except modem).
I try with the latest version of BS and the problem was not solved. So if there is a previous installation of BS fom MS the BS from Tos get the message of "unable to create the bluetooth virtual com port".
Now i fixed reinstalling SO from beginning.

Similar Messages

  • �Unable to create the virtual machine. The error was -4�

    I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
    Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
    It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
    Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
    I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
    I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
    I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
    This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
    Software used
    Windows XP SP2
    Visual studio.net 2003 SP1 (the problem also occurred without SP1)
    .NET Framework 1.1 SP1
    JACE 1.1rc1_05
    JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

    Do you resolve the problem? If so what was the fix?
    I have been getting the Java Virtual Machine Launcher error message “Could not create the virtual machine” when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
    I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
    I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
    During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation – error invoking JVM error message.
    I have restarted the machine also.
    There are some remains of J2RE 1.4.2u13 still on the machine –even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
    I am running Win XP SP2 and IE6 SP2.
    Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Quick install of RDS "unable to create the session collection"

    Simple as new virtual server, not touched. Had this happen in the past as well. When I attempt to run the Quick Install of RDS I get "unable to create the session collection" on the Session Collection stage. Then when I go to add roles or features
    the "session-based desktop deployment" option is greyed out.
    Clearly this is broken, and has been for a long time.
    Why in FUCK hasn't this been fixed?
    Why in FUCK are Microsoft talking Windows 10 and new Server version when shit like this isn't fixed?

    Hi Allister,
    Thank you for posting in Windows Server Forum.
    Sorry to hear about your hatred regarding the product. But the error which you are facing suggest that you can’t create the session collection, this generally happens when something went wrong during installation of RDSH role. You can try to remove the role
    using server manager and then perform reboot of server. And after that again use server manager to add the role again.
    Please follow the test lab guide to install from the scratch, you'd better not install the RDSH on the DC.
    Test Lab Guide: Remote Desktop Services Publishing 
    http://technet.microsoft.com/en-us/library/hh831442
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Weblogic 9.2 server not starting up : Could not create the Java virtual mac

    Hi
    I have created Weblogic domain.
    Now I am trying to bring my server up by using the startWeblogic.cmd present in domain\bin.
    I get the following error -
    java version "1.5.0_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
    Java HotSpot(TM) Client VM (build 1.5.0_12-b04, mixed mode)
    Unrecognized option: -
    Could not create the Java virtual machine.
    The output when i run the start script is as follows -
    JAVA Memory arguments: -Xms1024m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=256m
    WLS Start Mode=Development
    CLASSPATH=S:local;;D:\bea\patch_weblogic923\profiles\default\sys_manifest_classpath\weblogic_patch.jar;P:\JDK150~1\lib\tools.jar;D:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;D:\bea\WEBLOG~1\server\lib\weblogic.jar;D:\bea\WEBLOG~1\server\lib\webservices.jar;;D:\bea\WEBLOG~1\common\eval\pointbase\lib\pbclient51.jar;D:\bea\WEBLOG~1\server\lib\xqrl.jar;;Q:\VODAFO~1\lib\WSDLProxy.jar;
    PATH=D:\bea\patch_weblogic923\profiles\default\native;D:\bea\WEBLOG~1\server\native\win\32;D:\bea\WEBLOG~1\server\bin;P:\JDK150~1\jre\bin;P:\JDK150~1\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\Program Files\TortoiseSVN\bin;D:\ProgramFiles\Rational\common;C:\Program Files\CVSNT\;D:\bea\WEBLOG~1\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    Starting WLS with line:
    P:\JDK150~1\bin\java -client -Xms1024m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=256m -Xverify:none -da -Dplatform.home=D:\bea\WEBLOG~1 -Dwls.home=D:\bea\WEBLOG~1\server -Dwli.home=D:\bea\WEBLOG~1\integration -Dweblogic.management.discover=true -Dweblogic.http.descriptor.merge=true -Dejbruntime.database=pointbase44 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\bea\patch_weblogic923\profiles\default\sysext_manifest_classpath -Djava.protocol.handler.pkgs=com.vodafone.vgsg.wsdlproxy -Dcom.vodafone.vgsg.wsdlproxy.protocol=http -Dcom.vodafone.vgsg.wsdlproxy.host=localhost -Dcom.vodafone.vgsg.wsdlproxy.port=7001 -Dweblogic.Name=portalServer -Djava.security.policy=D:\bea\WEBLOG~1\server\lib\weblogic.policy - weblogic.Server
    I checked all configurations. All seem fine but I am surely missing something.
    I recreated the domain thinking I messed up something but that did not help.
    I tried using jrockit instead of sun jdk. It still could not create JVM.
    I really appreciate any help!
    Regards,
    Smita

    Extra dash in the java start line ( before the weblogic.Server ):
    -Dweblogic.Name=portalServer -Djava.security.policy=D:\bea\WEBLOG~1\server\lib\weblogic.policy - weblogic.Server
    might be why you get the message:
    Unrecognized option: -
    I can get the same error with this example:
    /bin> java -
    Unrecognized option: -
    Could not create the Java virtual machine.

  • Start up Error: "Could not create the Java virtual machine"

    I downloaded WebLogic Platform 10.3.0.0 (net_server103_win32.exe) and installed it on my Windows Vista laptop.
    I am unable to start the server.
    From Start menu I selected (WebLogic ServerExamples-->Start Examples Server)
    The following output displayed in the console window:
    JAVA Memory arguments: -Xms256m -Xmx512m
    WLS Start Mode=Development
    CLASSPATH=C:\bea\wlserver_10.3\samples\server\examples\build\serverclasses;C:\be
    a\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\be
    a\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\be
    a\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea
    \JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSE
    RV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_1
    0.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1
    .5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSER
    V~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\p
    ointbase\lib\pbclient57.jar;C:\bea\WLSERV~1.3\server\lib\xqrl.jar;;
    PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\
    default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\ser
    ver\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\
    bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\Windows\system32;C:\Windows;C:\Windo
    ws\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE;C:\Program Files\Comm
    on Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLS
    hared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program File
    s\QuickTime\QTSystem\;C:\Program Files\Java\jre1.6.0\bin;C:\groovy\Groovy-1.5.7\
    bin;C:\Sun\SDK\bin;C:\Sun\SDK\jdk\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci
    920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, c
    ompiled mode)
    Starting WLS with line:
    C:\bea\JROCKI~1\bin\java -jrockit -Xms256m -Xmx512m -Xverify:none -da -Dplat
    form.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=
    C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeD
    ev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patc
    h_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_wls1030\profil
    es\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\default\sysext
    manifestclasspath -Dweblogic.Name=examplesServer -Djava.security.policy=C:\bea
    \WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    Could not create the Java virtual machine.
    Stopping PointBase server...
    PointBase server stopped.
    C:\bea\wlserver_10.3\samples\domains\wl_server>
    Does anyone have any suggestions on how to troubleshoot this problem?
    Thank you,
    B. Regan

    I do not know how to modify any startup parameters. I am new to WebLogic and downloaded and installed the server for the first time yesterday. I used all of the defaults for the install. To start the server I am using Windows Start menu like this:
    Start-->All Programs-->Oracle WebLogic-->WebLogic Server 10gR3-->Examples-->Start Examples Server
    A command prompt window opens and the messages I described earlier display in the window.
    These were the messages when I used another command window to call the example server domain's bin\setDomainEnv.cmd script and then execute java -version (as suggested in the earlier post):
    C:\bea\wlserver_10.3\samples\domains\wl_server>java -version
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, c
    ompiled mode)
    I see now that when I go to
    Start-->All Programs-->Oracle WebLogic-->WebLogic Server 10gR3-->Examples
    that there is an option to "Stop Example Server" When I choose that option another command window opens, a couple of messages scroll by, there's a pause at a "connecting to t3://localhost:7001" then a bunch of message flash by and the command window disappears. So I can't capture the output of that command.
    I tried rebooting my laptop but no change in the behavior.
    There is some good news. I tried starting the Medical Records Server. That command succeeded. I will see what I can learn through using the Medical Records Server and ignore the Examples Server for now.
    Thank you for the suggestions.
    B.Regan

  • BTTray Error: Unable to start the Bluetooth Stack Service

    I have a HP TouchSmart 610-1190f operating system Windows 7 64-bit
    I installed Norton 360 back in January and ran the registry program which corrupted the Bluetooth.
    BTTray Error:  Unable to start the Bluetooth Stack Service.  I know that a system restore will take care of it, but when it happened I did not know that and I also did not know that I can't go back in time like Windows XP.  I've tried reinstalling the driver with no luck.  Is my only option a System Recovery?

    Product Name: HP H8-1160t
    Product Number: QC45AV#ABA
    I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
    After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
    Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
    NO FIX!!  As expected.  Why Did HP Software Support think the new card would fix the issue?? HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
    OK. I FIXED the problem myself:
    I downloaded the Broadcom fix:
    sp56715.exe
    Available from:
    ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe   (eliminate the spaces...HP forum would not let me load this VALID site.
    I am NOT POSITIVE THAT DOWNLOAD IS FOR YOUR VERSION, BE CERTAIN TO CHECK SYSTEM REQUIREMENTS.
    Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
    Trust me, HP Software Support is a waste of time.

  • Unable to create the temporary folder. Error 183 when starting Distiller

    New information discovered - see end of message!
    Full error message is (window title is Acrobat Distiller):
    "Unable to create the temporary folder
    Error: 183 - cannot create a file when that file already exists."
    I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
    Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
    "The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
    All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
    The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
    NEW INFO
    I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
    The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
    Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

    what i did to eliminate that error message, i don't think it eliminated th
    e problem but now i can reboot and log in OK, was 2 things:
    i went into my system registry and unchecked to start at startup and then disavled it.
    i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

  • SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

    Hello -
    I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
    I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
    I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
    Here is the message I get in the log files:
    Message ID: 4963
    Process ID: 4364
    Thread ID: 7996
    Componet: SMS_MP_CONTROL_MANAGER
    MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
    Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
    Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
    Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
    Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
    Possible cause: The designated Web Site is disabled in IIS.
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
    I've tried what this one website mentioned:
    http://myitforum.com...-directory.aspx
    - Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
    - Uninstall the IIS component from the OS of the Site Server.
    - Reboot the Site Server.
    - Run ccmdelcert.exe from the SMS Toolkit.
    - Reinstall the IIS component (with BITS) on the OS of the Site Server.
    - Go into the IIS manager and allow WebDav.
    - Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
    These steps didn't seem to work, probably because it was for SMS 2003.
    Here is the MPmsi log file:
    <11-24-2009 17:39:28> SMSMP Setup Started....
    <11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
    <11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
    <11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
    <11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
    <11-24-2009 17:39:28> Pre Req MSXML60 found.
    <11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
    <11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
    <11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
    <11-24-2009 17:39:30> msxml6.msi exited with return code: 0
    <11-24-2009 17:39:30> msxml6.msi Installation was successful.
    <11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
    <11-24-2009 17:39:30> Installing the SMSMP
    <11-24-2009 17:39:30> Passed OS version check.
    <11-24-2009 17:39:30> IIS Service is installed.
    <11-24-2009 17:39:30> checking WebDAV configuraitons
    <11-24-2009 17:39:30> WebDAV is configured
    <11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
    <11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    <11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
    <11-24-2009 17:40:24> mp.msi exited with return code: 1603
    <11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
    <11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed. 
    Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
    Any advice would be greatly appricated!
    Thanks!

    Just read the post below
    http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
    <Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
    Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
    Remove the MP as a site system role (if it is still installed), wait for it to finish
    2.       
    Remove IIS completely
    4.     
    Reboot
    5.     
    Stop the Task Scheduler Service
    6.     
    Rename the %windir%\Tasks folder to something else (or move it)
    7.     
    Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
    8.     
    Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access.  We will need this in case we see
    the same security failure.
    9.     
    Reinstall IIS, BITS, WebDAV
    10. 
    Insure BITS and WebDAV are enabled
    11. 
    Reinstall the MP
    Server Engineer

  • OAM Identity Asserter Provider Error:Unable to create the AccessGate entry

    Hi All,
    I have installed Oracle Access Manager and trying to protect an application deployed on weblogic application server.
    I have added the jar oamAuthnProvider in weblogic server lib mbeantypes and configured an OAM Identity Asserter Provider in myrealm. When I restart the weblogic server, I encounter the following error:
    <Error> <> <BEA-000000> <OAMAP-60516:Unableto create the AccessGate entry for identity assertion/authentication.>
    <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException
    : com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException.weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
    When I remove the following section from config.xml, the server starts fine:
    <sec:authentication-provider xmlns:ext="http://www.bea.com/ns/weblogic/90/security/extension" xsi:type="ext:oam-identity-asserterType">
    <n1:name xmlns:n1="http://www.bea.com/ns/weblogic/90/security">OAMID</n1:name>
    <n2:control-flag xmlns:n2="http://www.bea.com/ns/weblogic/90/security">REQUIRED</n2:control-flag>
    <ext:access-gate-name>MYAPP</ext:access-gate-name>
    <ext:primary-access-server>AccessServer</ext:primary-access-server>
    <ext:application-domain>MYDOMAIN.com</ext:application-domain>
    <ext:access-gate-password-encrypted>{AES}P3UIYbQpYupPs=</ext:access-gate-password-encrypted>
    </sec:authentication-provider>
    Has anyone come across this error before? Please suggest a workaround..
    Software versions being used:
    OAM 10.1.4.3
    Weblogic: 10.3.2
    Thanks
    Joe

    I am having the same problem on my WLS 10.3.4. running OSB 11g. I get the following error:
    tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-000000> <OAMAP-60516:Unable to create the AccessGate entry for identity assertion/authentication.>
    ####<Feb 1, 2011 1:16:50 PM PST> <Info> <Security> <WD-OR14P5A5W624> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-090511> <The following exception has occurred:
    com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
         at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
         at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
         at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:222)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1784)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:445)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:870)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1030)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:881)
         at weblogic.security.SecurityService.start(SecurityService.java:142)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    I looked the error number up and it says:
    OAMAP-60516: Unable to create the AccessGate entry for identity assertion/authentication.
    Cause: AccessGate instance creation failed.
    Action: See the Identity Asserter/Authenticator log for details.
    Level: 1
    Type: ERROR
    Impact: Configuration
    This seems to indication my identity assertion is incorrect. My oam authentication provider is pretty simple.
    I am using OPEN transport security so the provider config is pretty simple. I provided an AccessGate pwd, primary and secondary access gate servers and Access Gate name provided by my administrator.
    I'm not sure about what the Application Domain field refers to. Can someone provide guidance on that?

  • FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

    Hi,
    We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
    When this interface runs, most of the files will be delivered but some of the messages will be errored out.
    The receiver channel has shown the following error-
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
    I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
    Can someone suggest what might be the cause for this error.
    Thanks in advance.

    Hi ,
    As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
    1.perform Full CPA cache refresh using PIDIRUSER
    2.The problem seems to be in establishing the connection with the File server . This could be due to
    a. Wrong user name or password in receiver adapter .
    b. Firewall connection are not open
    actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
    3. Finally please check the errorneous communication channel .
    to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
    if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
    4.Please check your maximal connection pool .
    Regards,
    Saurabh

  • Error: Unable to start the bluetooth stack service

    HP Pavilion g7-2017us, Windows 7
    After starting up I get the error message: UNABLE TO START THE BLUETOOTH STACK SERVICE.
    First, I don't know what that means ... Second, I don't know how to remedy the problem.
    Can anyone help please? ... THANKS!

    Steps I would suggest are:
    1. Update Bluetooth Device Driver. Steps to update the device driver:
    i. Click on Start
    ii. Select Control Panel
    iii. Select System and maintenance
    iv. Click Device Manager (If you are prompted for an administrator password or confirmation, type the password or provide confirmation.)
    v. In the Device manager locate the Blue tooth device
    vi. Click the Driver tab, and then select Update driver
    If its still not fixed go to step 2
    2. Uninstall the Bluetooth device, restart the computer and install the latest drivers.
    Link for reference: Update a driver
    Broadcom bluetooth Drivers for windows 7 64-bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104112-1&cc=us&dlc=en&lc=en...
    Intel Wireless Drivers for windows 64-bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104707-1&cc=us&dlc=en&lc=en...
    Regards;
    Ray
    I am an HP employee
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • Unable to create the Mailbox Store. The database returned an error

    hi we have a new unity connection 10.51 install . trying to create a 2nd mailbax store and get the following error:
    Unable to create the Mailbox Store. The database returned an error.
    creates the store but i can't open it to mount it / enable it.

    Sadly, that did not resolve the problem. The app still terminated and generated an error. Any other suggestions?
    Here is the first portion of the error it generates:
    Process:         App Store [3200]
    Path:            /Applications/App Store.app/Contents/MacOS/App Store
    Identifier:      com.apple.appstore
    Version:         1.0.2 (63.1)
    Build Info:      Firenze-630100~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [239]
    Date/Time:       2011-08-17 21:43:21.942 -0700
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          23825 sec
    Crashes Since Last Report:           10
    Per-App Interval Since Last Report:  21 sec
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      4133601A-34FD-472F-98E6-73E4DE9BFC06
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Application Specific Information:
    abort() called
    *** Terminating app due to uncaught exception 'NSImageCacheException', reason: 'Cannot lock focus on image <NSImage 0x10037c3c0 Size={0, 0} Reps=(
    )>, because it is size zero.'

  • Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

    Hello Community
    my ULS-logs are flooded with entries like
    w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
    Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
    Best Regards
    Michael

    Hi Linda
    thanks a lot for help.
    I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
    of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
    Right before the strange entry in the logs we are getting these:
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
    02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
    02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
    that's it, unfortunately. These entries are repeating every 15 seconds.
    Best Regards
    Michael

  • SDDM 4 EA3: Unable to launch the Java Virtual Machine (Win 7 64bit)

    SQL Developer v4 EA3 is working fine, but I decided to download the stand-alone SQL Developer Data Modeler because I had seen people recommending using it in favor of the one bundled with SQLDEV.
    Windows 7 64-bit
    Java (64 bit) installed into C:\Program Files\Java\jdk1.7.0_25
    When I double-click the short-cut to start SDDM I get the following pop-up dialog error:
    Title:  Oracle SQL Developer Data Modeler
    Unable to launch the Java Virtual Machine
    Located at path:
    C:\Program Files\Java\jdk1.7.0_25\bin\msvcr100.dll
    ***NewsFlash***
    I think I stumbled on the solution just prior to posting,  so here is what worked for me in case anyone else runs into this....
    I had created a desktop short-cut to "C:\Program Files\datamodeler\datamodeler.exe", which I am guessing is the 32bit version of the binary file.   
    I was able to launch successfully by pointing to "C:\Program Files\datamodeler\datamodeler64.exe"

    That path is incorrect - strip everything after the jdk1.7.0_45\

Maybe you are looking for