Unable to create the entry in the AS2 EDIINT MIC table

This could be caused by duplicate AS2-From, AS2-To and MessageID combinations being written to the table. Error: Violation of PRIMARY KEY constraint 'PK_EdiInt_Mic'.
Cannot insert duplicate key in object 'dbo.EdiInt_Mic'.
How to reprocess this feed?

Hi,
To resolve this error, check the full error message for information about why the insert operation failed. In SQL, in the EDIINT_MIC table, determine whether there is duplicate AS2-From and AS2-To MessageID combinations. If so, remove them.
For more information, you can refer the document:
http://msdn.microsoft.com/en-us/library/bb967928.aspx
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Duplicate entry in AS2 EDIINT MIC table

Hi,
While sending a AS2 message to a partner, got an error saying -
Unable to create the entry in the AS2 EDIINT MIC table. This could be caused by duplicate AS2-From, AS2-To and MessageID combinations being written to the table.
MSDN says that I need to delete the duplicate entry. As this happened in Test environment, I did the same and everything fine.
But, in Production, I don't want to delete anything.
So, can somebody help me on understanding the importance of MIC table i.e how it works and when/how duplicate transactions can happen in this table?
Thanks and Regards,
Sugata

Hi,
As the error message reads the problem is due to a deadlock situation.
http://stackoverflow.com/questions/5389261/sql-transaction-was-deadlocked
http://www.toadworld.com/platforms/sql-server/b/weblog/archive/2012/05/16/transaction-process-id-was-deadlocked-on-resources-with-another-process-and-has-been-chosen-as-the-deadlock-victim-rerun-the-transaction.aspx
Check with the above articles in which deadlock can be identifed and removed.
Regards, Vivin.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

OAM Identity Asserter Provider Error:Unable to create the AccessGate entry

Hi All,
I have installed Oracle Access Manager and trying to protect an application deployed on weblogic application server.
I have added the jar oamAuthnProvider in weblogic server lib mbeantypes and configured an OAM Identity Asserter Provider in myrealm. When I restart the weblogic server, I encounter the following error:
<Error> <> <BEA-000000> <OAMAP-60516:Unableto create the AccessGate entry for identity assertion/authentication.>
<Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException
: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException.weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
When I remove the following section from config.xml, the server starts fine:
<sec:authentication-provider xmlns:ext="http://www.bea.com/ns/weblogic/90/security/extension" xsi:type="ext:oam-identity-asserterType">
<n1:name xmlns:n1="http://www.bea.com/ns/weblogic/90/security">OAMID</n1:name>
<n2:control-flag xmlns:n2="http://www.bea.com/ns/weblogic/90/security">REQUIRED</n2:control-flag>
<ext:access-gate-name>MYAPP</ext:access-gate-name>
<ext:primary-access-server>AccessServer</ext:primary-access-server>
<ext:application-domain>MYDOMAIN.com</ext:application-domain>
<ext:access-gate-password-encrypted>{AES}P3UIYbQpYupPs=</ext:access-gate-password-encrypted>
</sec:authentication-provider>
Has anyone come across this error before? Please suggest a workaround..
Software versions being used:
OAM 10.1.4.3
Weblogic: 10.3.2
Thanks
Joe

I am having the same problem on my WLS 10.3.4. running OSB 11g. I get the following error:
tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-000000> <OAMAP-60516:Unable to create the AccessGate entry for identity assertion/authentication.>
####<Feb 1, 2011 1:16:50 PM PST> <Info> <Security> <WD-OR14P5A5W624> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-090511> <The following exception has occurred:
com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:222)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1784)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:445)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:870)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1030)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:881)
     at weblogic.security.SecurityService.start(SecurityService.java:142)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I looked the error number up and it says:
OAMAP-60516: Unable to create the AccessGate entry for identity assertion/authentication.
Cause: AccessGate instance creation failed.
Action: See the Identity Asserter/Authenticator log for details.
Level: 1
Type: ERROR
Impact: Configuration
This seems to indication my identity assertion is incorrect. My oam authentication provider is pretty simple.
I am using OPEN transport security so the provider config is pretty simple. I provided an AccessGate pwd, primary and secondary access gate servers and Access Gate name provided by my administrator.
I'm not sure about what the Application Domain field refers to. Can someone provide guidance on that?

Unable to create database entry in the directory service. - TNS-04

We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
Unable to create database entry in the directory service. - TNS-04409: Directory service error
We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
In the meantime, I found these errors in the oid logs:
oidldapd01.log:
2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
connection
Any ideas?
Thanks
Naiying

Hi,
Thanks for update.
No, didn't find DSCC agent logs get updated when I have the pop up.
C:\dsee7\var\dcc\agent\logs
In the glassfish server log, I didn't find new transaction when I hit the issue
C:\glassfish3\glassfish\domains\domain1\logs

Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
Michael

Hi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Hudson - Unable to create the home directory

Hello, I installed tomcat and downloaded hudson.war and put it into
/opt/tomcat/webapps/hudson.war
I'm able to navigate to localhost:8080/hudson, but I only see this message:
Unable to create the home directory {0}. This is most likely a permission problem.
To change the home directory, use HUDSON_HOME environment variable or set the HUDSON_HOME system property. See Container-specific documentation for more details of how to do this.
I've set HUDSON_HOME in a gazillion places -- yet none of them has done any good.
Can anyone point me to a solution?
Thanks,
--Nate

That indicates that Time Machine is having trouble writing to that sparse bundle.
See #C9 and #C10 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
<b>Note 727897 - WBS element conversion in extended classic scenario</b>
<b>Note 1000184 - Account assignment error when document transfer to back end</b>
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Unable to create the bluetooth virtual COM port

Hi all
I install BS from Toshiba and it seems ok. Bt ir desn´t work. I see all the drivers installed, system devices, etc. No Toshiba BT ports can be seen. Local com ports only show modem port. Try to create a virtual port but get a message "unable to create a bluetooh virtual port" I have a satellite m100-145. Can anyone help on this ?
thx

Thx for your suport.
I decide to reinstall windows and all software. Now it works.
The error was due to the fact that if you have BS from Microsoft (called bluetooth monitor) and you install the BS from Toshiba after that, even if you remove the BS from MS, the BS from Tos is unable to create the virtual com ports (except modem).
I try with the latest version of BS and the problem was not solved. So if there is a previous installation of BS fom MS the BS from Tos get the message of "unable to create the bluetooth virtual com port".
Now i fixed reinstalling SO from beginning.

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

Unable to create the protocol specific B2B message

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
    at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
    at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
    at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
    at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
    ... 6 more

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
    at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
    at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
    at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
    at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
    at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
    at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
    ... 6 more

Unable to create the test suite file

Hi,
I imported a BPEL project to my JDeveloper ver 10.1.3.3.0. When I clicked on the <project name>.bpel, I got the
"unable to create the test suite file" error and all the partnerlinks have a bang sign (!). None of the partner link works.
Please help,
Thanks,
Amorsolo

Probably you might want to post it in the BPEL forum.
BPEL
-Arun

Unable to create the Mailbox Store. The database returned an error

hi we have a new unity connection 10.51 install . trying to create a 2nd mailbax store and get the following error:
Unable to create the Mailbox Store. The database returned an error.
creates the store but i can't open it to mount it / enable it.

Sadly, that did not resolve the problem. The app still terminated and generated an error. Any other suggestions?
Here is the first portion of the error it generates:
Process:         App Store [3200]
Path:            /Applications/App Store.app/Contents/MacOS/App Store
Identifier:      com.apple.appstore
Version:         1.0.2 (63.1)
Build Info:      Firenze-630100~1
Code Type:       X86-64 (Native)
Parent Process: launchd [239]
Date/Time:       2011-08-17 21:43:21.942 -0700
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          23825 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 21 sec
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      4133601A-34FD-472F-98E6-73E4DE9BFC06
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
*** Terminating app due to uncaught exception 'NSImageCacheException', reason: 'Cannot lock focus on image <NSImage 0x10037c3c0 Size={0, 0} Reps=(
)>, because it is size zero.'

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the entry in the AS2 EDIINT MIC table

Similar Messages

Maybe you are looking for