Unable to create the Jco destination

Hi Experts,
I am facing a strange issue, As part of ESS and MSS i have to create some Jco destinations in the Wedynpro content administrator.I am giving the all the necessary information for the Jco creation when i click on Finish, jco is not getting creted.
And the status is in Red color...
Can any one help me what i am missing???

Hi Anil,
Hope you are doing good.
Is the SLD up and running?
If the issue persists:
1.)Delete all the JCO destinations from Content Admin and then from SLD
2.)Restart the complete cluster once and do a SLD data trigger.
3.)Then recreate all the jco destinations again from content admin. (Important note: using the "New JCO Message Server Destination" button in SLD will create an inconsistent state. Please do not use it.)
let me know how this goes.
Thank you!
Kind Regards,
Hemanth
SAP AGS

Similar Messages

Error while creating the JCO destinations

Hi All,
I am getting the following error while creating the JCO destinations.
There are no message servers maintained in the associated SLD. Please contact your system administrator.
Please help me in resolving this
Thanks

http://help.sap.com/saphelp_erp2005vp/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
Creating New Web AS ABAP Technical Systems
/*Reward if helpful
Message was edited by:
Anant
Message was edited by:
Anant

Unable to create the JCO connections in webdypro (JAVA) No SLD Connection

HI All,
In webdynpro i am unable to create standard JCo connections. create Jco connections and Maintain Jco COnnections are disabled. when i click any of the standard content of the Jco connections it displays error message No sld check. But SLD is running fine. I have checked in Visual Admin there also SLD supplier is running fine.
But i am unable to create or maintain the Standard content of the JCo Destinations.
Thank You,
Mahesh C

Hi ,
I am having all admin rights. And also i have checked in Check SLD Connection. It showing the error connection to SLD Could not opened successfully. But SLD is running fine and i have checked in Visual admin SLD datasupplier is running fine.
When i check in the log of the SLD there it is showing
#2852 11/18/2008 18:27:18.265 [SAPEngine_Application_Thread[impl:3]_29] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors.
Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors.
Is that i need to change the CIM content?
I could not able to get clue on this.
Thank You,
Mahesh C

Unable to create a jco destination using remote AS Java system on myjava sy

Dear SAP Gurus,
I had ce 7.1 and nw 2004s based AS java Systems.I want to create a jco destination in my CE 7.1 system using usermapping data of nw 2004s for jco communication.So i created a AS Java system of NW2004s in my CE 7.1 SLD .when i try to create a jco destination using the AS JAVA as Nw2004s system it is not creating .Please help me to solve this issue.
regards,
vanamaSanthosh.

Hi vanamaSanthosh
try this
1. In your CE1 System where u define your JCO destination, Go to C:\WINDOWS\system32\drivers\etc
open hosts file and define the identity of AS System like <IP address> <name of the system>
for example 159.858.2.45 abcd
restart the server and then check.
Best Regards
Satish Kumar

Error when trying to create a JCO Destination

Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-Arne

Hi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir

ERROR WHEN I CREATE A JCo DESTINATIONS

Hi to all
I have the SLD running. I want create two JCo destinatios. I want create a Web Dynpro application with adaptive RFC Model.
But, I login to http:///webdynpro/dispatcher/sap.com/tcwdtools/Explorer
and when I attempt create a JCo destinations, appear the following error:
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:985)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
    ... 45 more
Can someone say me, why occurs this error ? I have reviewed all my configuration, but I haven´t found nothing.
Thank you very much.
Regards
Dario Rodriguez

I think while creating the JCOs you must hav left some field with a NULL value.Try to check out that all the connection properties hav been specified correctly also make sure that the connection pooling has a small range.

Error when creating a JCo destination

Dear All,
I am trying to create a JCo destination using the 'Content Administrator' but am getting the following error:
"Please choose another name for the new JCo destination. The defined name 'SLD_PROBE_XYZ' is used in the SLD."
It seems that whatever name I give the JCo destination, a similar error occurs.
I have read a couple of pdf's on JCo destinations but to no avail. Any pointers would be much appreciated...
Kind Regards
Chris Jackson

>Hi,
> "com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed >attempts"
As you can clearly see that logs are stating that user you are entering in JCO destination to connect to backend system has wrong password.
Check the password of the user that you are entering in JCO destination.
Thanks
Sunny

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

OAM Identity Asserter Provider Error:Unable to create the AccessGate entry

Hi All,
I have installed Oracle Access Manager and trying to protect an application deployed on weblogic application server.
I have added the jar oamAuthnProvider in weblogic server lib mbeantypes and configured an OAM Identity Asserter Provider in myrealm. When I restart the weblogic server, I encounter the following error:
<Error> <> <BEA-000000> <OAMAP-60516:Unableto create the AccessGate entry for identity assertion/authentication.>
<Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException
: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException.weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
When I remove the following section from config.xml, the server starts fine:
<sec:authentication-provider xmlns:ext="http://www.bea.com/ns/weblogic/90/security/extension" xsi:type="ext:oam-identity-asserterType">
<n1:name xmlns:n1="http://www.bea.com/ns/weblogic/90/security">OAMID</n1:name>
<n2:control-flag xmlns:n2="http://www.bea.com/ns/weblogic/90/security">REQUIRED</n2:control-flag>
<ext:access-gate-name>MYAPP</ext:access-gate-name>
<ext:primary-access-server>AccessServer</ext:primary-access-server>
<ext:application-domain>MYDOMAIN.com</ext:application-domain>
<ext:access-gate-password-encrypted>{AES}P3UIYbQpYupPs=</ext:access-gate-password-encrypted>
</sec:authentication-provider>
Has anyone come across this error before? Please suggest a workaround..
Software versions being used:
OAM 10.1.4.3
Weblogic: 10.3.2
Thanks
Joe

I am having the same problem on my WLS 10.3.4. running OSB 11g. I get the following error:
tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-000000> <OAMAP-60516:Unable to create the AccessGate entry for identity assertion/authentication.>
####<Feb 1, 2011 1:16:50 PM PST> <Info> <Security> <WD-OR14P5A5W624> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-090511> <The following exception has occurred:
com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
 at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
 at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
 at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
 at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
 at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
 at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
 at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:222)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1784)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:445)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:870)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1030)
 at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:881)
 at weblogic.security.SecurityService.start(SecurityService.java:142)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I looked the error number up and it says:
OAMAP-60516: Unable to create the AccessGate entry for identity assertion/authentication.
Cause: AccessGate instance creation failed.
Action: See the Identity Asserter/Authenticator log for details.
Level: 1
Type: ERROR
Impact: Configuration
This seems to indication my identity assertion is incorrect. My oam authentication provider is pretty simple.
I am using OPEN transport security so the provider config is pretty simple. I provided an AccessGate pwd, primary and secondary access gate servers and Access Gate name provided by my administrator.
I'm not sure about what the Application Domain field refers to. Can someone provide guidance on that?

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Hudson - Unable to create the home directory

Hello, I installed tomcat and downloaded hudson.war and put it into
/opt/tomcat/webapps/hudson.war
I'm able to navigate to localhost:8080/hudson, but I only see this message:
Unable to create the home directory {0}. This is most likely a permission problem.
To change the home directory, use HUDSON_HOME environment variable or set the HUDSON_HOME system property. See Container-specific documentation for more details of how to do this.
I've set HUDSON_HOME in a gazillion places -- yet none of them has done any good.
Can anyone point me to a solution?
Thanks,
--Nate

That indicates that Time Machine is having trouble writing to that sparse bundle.
See #C9 and #C10 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
Note 727897 - WBS element conversion in extended classic scenario
Note 1000184 - Account assignment error when document transfer to back end
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Unable to create the bluetooth virtual COM port

Hi all
I install BS from Toshiba and it seems ok. Bt ir desn´t work. I see all the drivers installed, system devices, etc. No Toshiba BT ports can be seen. Local com ports only show modem port. Try to create a virtual port but get a message "unable to create a bluetooh virtual port" I have a satellite m100-145. Can anyone help on this ?
thx

Thx for your suport.
I decide to reinstall windows and all software. Now it works.
The error was due to the fact that if you have BS from Microsoft (called bluetooth monitor) and you install the BS from Toshiba after that, even if you remove the BS from MS, the BS from Tos is unable to create the virtual com ports (except modem).
I try with the latest version of BS and the problem was not solved. So if there is a previous installation of BS fom MS the BS from Tos get the message of "unable to create the bluetooth virtual com port".
Now i fixed reinstalling SO from beginning.

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

Unable to create the protocol specific B2B message

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
 at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
 at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
 at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
 at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
 at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
 at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
 ... 6 more

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
 at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
 at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
 at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
 at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
 at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
 at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
 ... 6 more

Unable to create the Jco destination

Similar Messages

Maybe you are looking for