Unable to create the new solution in Solman

Hello all,
I'm ubale to create new Solution using the transaction SOLUTION_MANAGER.
After choosing the button New to create the new solution and entering all required data when I choose the button Continue nothing is happenning. I'm not getting any error/warning it's simply sitting idle.
My Solman version is ST 400 Patch 09
Please help.
Thanks,
Ben

I had the same Problem.
You must Patch you Solution Manager Until Patch11.
Then you can create a new Solution
The Support Packages you must install are:
SAPKB70010
and
SAPKB70011
and
the CRT´s for the Packages
Edited by: Damian Reiner on Aug 7, 2008 2:16 PM

Similar Messages

Unable to create the new application

HI
i am trying to create a new application ,database connections are ok data source is ok .essbase connection is ok.when i described currency period plan 1 and no of years and then click finish i am getting this messege
An error occurred while processing this page. Check the log for details.

Hi John ,
Oracle® Hyperion Planning, Fusion Edition Version: 11.1.1.3.0
shared services 11.1.1.3
2003 windows service pack 2
Regards

How to create a new solution for portals?

Hi all,
In order to makde goinglive sesions for portals, I´ve updated SAP Solution Manager (SSM) to 7.0 EHP1-SP19.
Portals have two servers:
- Win 2003 for main application (NETWEAVER 7.0 2004s)
- HPUX 11.23 for database (Oracle 10.2.0.2.0)
I haven´t worked with solution manager until this update, and of course, I haven´t configured before.
I´ve a mix of terms, possible configurations:
- run SOLMAN_SETUP transaction after update ¿?
- install SMD ¿?
- install/configure SLD (we haven´t configured) ¿?
- create new solution, system components, logical components,...
I´ve tried to create a server, database, system, but I don´t know what is the right procedure.
I´ve seen that there is a transaction called "SOLMAN_SETUP" that I suppose I´ve have to run to configure the new version, but the EWAs configured before de update, runs properly.
Do you know the steps as more detailed as possbible to create the new solution for portals after update?
Does any of this steps/procedure impact into our configured and running EWAs and Goinglive sesions?
Thanks in advance.
Best Regards
Chema
Edited by: tsunix on Mar 29, 2010 9:26 AM

Hello,
Are you trying to get the EWA working for Go-Live check or Solution Manager? Based on my understanding you are trying to get your Solution Manager setup to be able to generate these reports. However, I will provide notes for both incase I am misunderstanding you.
Please review the following notes for getting your system prepared for Go Live checks:
207223    SAP EarlyWatch Alert processed at SAP
1095227 FAQ: SAP Hosting - Early Watch Alerts
207223    SAP EarlyWatch Alert processed at SAP
Also, you can visit http://service.sap.com/earlywatch for more help/documentation on this.
If you are trying to setup your EarlyWatch on your Solution Manager system, then please visit the following URL:
http://service.sap.com/ewa
You may also want to visit this note to see if it helps.
1257308   FAQ: Using EarlyWatch Alert
Thanks,
Mark

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions

I am unable to create a new email message when I connect to the internet through google

I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.

Try this. Settings>Safari>Block Pop-Ups>Off.
I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server.

HT5621 i created a new apple id. The verication email is not send to my email id. So i am unable to use the new apple id

Hi,
i created a new apple id. The verication email is not send to my email id. So i am unable to use the new apple id

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...

Creating a new solution doesn't work

Hi
I installed SolMan 40 / Maxdb / Server 2003 and I am using IE6
All fine, no problems.
after some configuration task (TA: SPRO) I want to create a new solution
within TA dswp || solution_manager
Button "Create" and Cancel" are visible
I entered "Name of the solution" and "language" and press button "Create"
<b>AND</b> nothing happened !!!
Even when I press "cancel"
What I am doing wrong ? any hints ?
Thanks for help in advance
Andreas

Note 1008717 worked for me as well. Thanks for the help.
Rex L. Farris

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
Michael

Hi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael

Windows 7 Setup was unable to create a new system partition

I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed. I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
a new system partition blah blah blah. I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
What I eventually found to be the solution was to go into the BIOS and change a setting. Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly. I think that's why other people had success after removing all external hard drives. After a
couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
Andy Mykrantz

Hi.
Thanks for sharing the information here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Getting error Unable to create a new Message Layout: 500 attempts failed.

Dear All,
I am trying to add Form Value item to the Message Component Layout region through personalization.
I am getting error Unable to create a new Message Layout: 500 attempts failed.
While I am able to add Message Text Input, Message Lov Input items without any issue.
Same issue will appear if I add stack layout region.
The requirement is to add two hidden field to a Oracle supplied Message Component Layout Region( Page /oracle/apps/pa/finplan/webui/UpdateForecastLinePG
region UpdateResourceAssignmentRN.FinSumFieldsRN)
Please help me any work around or solution.
Regards
Devender Yadav

Hi Sun,
Thanks for reply.
I am just trying to add Form Value item not the Message Layout Bean.
Jdeveloper is allowing to add the messageLayout bean to messageComponentLayout (I have just tested it). It means OA Framework is facilitating it, it is the personalization Framework which may have restriction.
Regards
Devender Yadav

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Por

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port-Printer. The Adobe PDF Printer may be unavailable. I'm using the original CD to set up

And on what system? Acrobat 7 is not compatible with Windows 7, if that's what you are using. You need to upgrade then.
Mylenium

Unable to create the new solution in Solman

Similar Messages

Maybe you are looking for