Unable to create the requriments using ExternalRequirement_Create_In

Hi,
We are trying to create the external requirements in SRM using proxy ExternalRequirement_Create_In.
We are populating the data from GIL(AS/400) and moving it to SRM via XI.
The data is coming till SRM correctlety.But this is not creating the external requirement.
Please let me know if some one come across or knows the solution.
Thanks
Sheetal

HI,
Go to SXMB_MONI of SRM system not XI system and check the status of the messages.
If the status in SRM system -SXMB_MONI is Scheduled then -
One of the reason may be, you did not register the Queues in the SRM side. for this go to SXMB_ADM->Manage Queues and Regsiter the Queues in SRM.
Regards,
Moorthy

Similar Messages

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

OAM Identity Asserter Provider Error:Unable to create the AccessGate entry

Hi All,
I have installed Oracle Access Manager and trying to protect an application deployed on weblogic application server.
I have added the jar oamAuthnProvider in weblogic server lib mbeantypes and configured an OAM Identity Asserter Provider in myrealm. When I restart the weblogic server, I encounter the following error:
<Error> <> <BEA-000000> <OAMAP-60516:Unableto create the AccessGate entry for identity assertion/authentication.>
<Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException
: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException.weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
When I remove the following section from config.xml, the server starts fine:
<sec:authentication-provider xmlns:ext="http://www.bea.com/ns/weblogic/90/security/extension" xsi:type="ext:oam-identity-asserterType">
<n1:name xmlns:n1="http://www.bea.com/ns/weblogic/90/security">OAMID</n1:name>
<n2:control-flag xmlns:n2="http://www.bea.com/ns/weblogic/90/security">REQUIRED</n2:control-flag>
<ext:access-gate-name>MYAPP</ext:access-gate-name>
<ext:primary-access-server>AccessServer</ext:primary-access-server>
<ext:application-domain>MYDOMAIN.com</ext:application-domain>
<ext:access-gate-password-encrypted>{AES}P3UIYbQpYupPs=</ext:access-gate-password-encrypted>
</sec:authentication-provider>
Has anyone come across this error before? Please suggest a workaround..
Software versions being used:
OAM 10.1.4.3
Weblogic: 10.3.2
Thanks
Joe

I am having the same problem on my WLS 10.3.4. running OSB 11g. I get the following error:
tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-000000> <OAMAP-60516:Unable to create the AccessGate entry for identity assertion/authentication.>
####<Feb 1, 2011 1:16:50 PM PST> <Info> <Security> <WD-OR14P5A5W624> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296595010528> <BEA-090511> <The following exception has occurred:
com.bea.common.engine.ServiceInitializationException: java.lang.RuntimeException
 at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
 at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
 at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
 at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
 at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
 at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
 at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:222)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1784)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:445)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:870)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1030)
 at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:881)
 at weblogic.security.SecurityService.start(SecurityService.java:142)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I looked the error number up and it says:
OAMAP-60516: Unable to create the AccessGate entry for identity assertion/authentication.
Cause: AccessGate instance creation failed.
Action: See the Identity Asserter/Authenticator log for details.
Level: 1
Type: ERROR
Impact: Configuration
This seems to indication my identity assertion is incorrect. My oam authentication provider is pretty simple.
I am using OPEN transport security so the provider config is pretty simple. I provided an AccessGate pwd, primary and secondary access gate servers and Access Gate name provided by my administrator.
I'm not sure about what the Application Domain field refers to. Can someone provide guidance on that?

Hudson - Unable to create the home directory

Hello, I installed tomcat and downloaded hudson.war and put it into
/opt/tomcat/webapps/hudson.war
I'm able to navigate to localhost:8080/hudson, but I only see this message:
Unable to create the home directory {0}. This is most likely a permission problem.
To change the home directory, use HUDSON_HOME environment variable or set the HUDSON_HOME system property. See Container-specific documentation for more details of how to do this.
I've set HUDSON_HOME in a gazillion places -- yet none of them has done any good.
Can anyone point me to a solution?
Thanks,
--Nate

That indicates that Time Machine is having trouble writing to that sparse bundle.
See #C9 and #C10 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
Note 727897 - WBS element conversion in extended classic scenario
Note 1000184 - Account assignment error when document transfer to back end
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
Michael

Hi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Unable to create the infotype

Hi SAP Guru,
Greetings for the day,
I had hired a guy with the infotype of 0207,0208,0209,0210 after hiring i try to transfer him using TRANSFER ACTION to another location say from New York to California, which is entirely a different state, where unable to create the 0208,0209,0210 in that i can able to create 0207 infotype alone, when i tried to create after 0207 creation, it is not accepting the information, Here i am looking for some one help, where some one can throw a torch for this issue.
I had checked with dynamic action, which shows correctly.
Pls help me in this regards, this is very urgent.
Thanks in advance for your reply.
Regards,
Babu.

Generally, an Infotype 208 is not required. Therefore, you would
not get an error in RPCACLU0 if an employee does not have one assigned
Without an IT0208 record, the system uses the tax authority
specified on IT0207. Additionally, the same applies to IT0209; one is
not required and the system will use that of either IT0207 or IT0208.
Best regards,
Márcio Leoni

Unable to create the test suits file!

Dear Experts!
Getting the "Unable to create the test suits file!" error while opening .bpel file in JDeveloper 10.1.3.5. Also, all the partner links showing warning symbol. When I click on them, getting the following error:
ERROR:WSDLException: faultCode=INVALID_WSDL: Invalid XML in document at: Start of root element expected.
Looks like partner links are not mapped correctly. Could you please throw some light, where I need to fix the issue.
Appreciate your help.
Thank you.

I had similar issue sometimes back, error was because sample xml my test was using wasn't conforming to my code. In my case, I didn't write test suite so deployment was successful and was getting error while testing post deployment. In your case, test suite will execute.
Try to follow your xslt mapping or any xpath statements within bpel flow, it must be having direct mapping of some element from source but your sample input xml might not be having that element and hence resulting in error. Try iterative debugging by adding more elements in input xml.
Regards,
Ankit

Quick install of RDS "unable to create the session collection"

Simple as new virtual server, not touched. Had this happen in the past as well. When I attempt to run the Quick Install of RDS I get "unable to create the session collection" on the Session Collection stage. Then when I go to add roles or features
the "session-based desktop deployment" option is greyed out.
Clearly this is broken, and has been for a long time.
Why in FUCK hasn't this been fixed?
Why in FUCK are Microsoft talking Windows 10 and new Server version when shit like this isn't fixed?

Hi Allister,
Thank you for posting in Windows Server Forum.
Sorry to hear about your hatred regarding the product. But the error which you are facing suggest that you can’t create the session collection, this generally happens when something went wrong during installation of RDSH role. You can try to remove the role
using server manager and then perform reboot of server. And after that again use server manager to add the role again.
Please follow the test lab guide to install from the scratch, you'd better not install the RDSH on the DC.
Test Lab Guide: Remote Desktop Services Publishing
http://technet.microsoft.com/en-us/library/hh831442
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to create the requriments using ExternalRequirement_Create_In

Similar Messages

Maybe you are looking for