Unable to create Trust between domains

Scenario. I am trying to build 2 way trust between two Windows forests abc.com & xyz.com
Highest OS in both domain is Win 2008 R2
FFL and DFL in both is Win2003
I added forwarders in DNS in both - It is resolving
I disabled Antivirus
I stopped Windows firewall in all the DCs of the domains and no n/w level port restrictions is there
I am able to ping to all DCs from each of the DCs in both domains.
Doing above all I am unable to create trust - in the trust wizard it is not identifying Domain names.
Another thing is I have a Primary zone exists in name of each of the domain name. ie In abc.com I have another Primary zone created in xyz.com, Likewise in XYZ.com I have ABC.com primary zone . Will this be an issue?, If not guidelines please...

Hi,
>>In ABC.com I have a Primary zone created as xyz.com, Likewise in XYZ.com I have ABC.com primary zone .
How
did
you create these Primary zones? Is there a ABC.com zone in ABC.com?
>>I am unable to put Conditional forwarders because I have a Primary zone exists in name
of each of the domain name
If
there is
a
DNS zone of another domain
then we cannot create a conditional forwarder for the other domain.
Besides,I
suggest you check the SRV Records. You can try to restart the netlogon services
to re-register SRV records.More
specifically, in the command
prompt, type
net stop netlogon to stop netlogon services, then type net start netlogon to start netlogon services.
Best Regards,
Erin

Similar Messages

Problem creating external trust between domains

Hello,
When I try to create one-way incoming external trust between 2 domains (to DomainA from DomainB) in separate forests I get this info:
This domain already has a one-way trust relationshp with specified domain.
But I cannot see it on the list of trusts either incoming or outgoing (in both domains).
For sure trust was never setup before.
In DomainA there are several other external not transitive trusts with other domains. But for sure DomainB do not have any incoming or outgoing trusts on list. Name resolution betwen domains is OK. I can ping domain name on both sides.
Any help is welcome.
Darek.

Hi,
Were there error events logged in Event Viewer? Besides, did we open necessary firewall ports for creating external trust?
Regarding firewall ports, the following thread can be referred to for more information.
Creating external trust between domain on different forest
http://social.technet.microsoft.com/Forums/en-US/efe56730-ff95-4d6b-b95c-fc2c01ebd2d3/creating-external-trust-between-domain-on-different-forest?forum=winserverDS
Best regards,
Frank Shen

How to create Trust between two domain

How to create Trust between two domain:
please help

Hi,
By default, two-way, transitive trusts are automatically created when a new domain is added to a domain tree or forest root domain using the Active Directory Installation
Wizard. The two default trust types are defined in the following table. However there have others many types of the AD trust, please refer the following KB to determine which type you need:
Trust types
http://technet.microsoft.com/en-us/library/cc775736%28v=ws.10%29.aspx
More relate KB:
Creating Domain and Forest Trusts
http://technet.microsoft.com/en-us/library/cc740018(WS.10).aspx
The related third party article:
How to configure Forest Level Trust in Windows Server
http://blogs.interfacett.com/how-to-configure-forest-level-trust-in-windows-server
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Moving SP2013 and SQL2008R2 to new domain - no trusts between domain

Hello,
I'm looking to move a customized installation of SharePoint 2013 (Microsoft server 2012 std VM) and it's db (SQL 2008 r2 VM) from one domain to another domain. There will be no trust between the domains and assume that no users or service accounts will be
migrated. Has anyone performed a similar operation? If so, can you provide guidance as to the best way to tackle this situation. Currently we plan on exporting the SP2013 VM from the old domain, importing (re-creating) that VM in the new domain and importing
the DB to an existing SQL server in the new domain. My concern is being able to log in to Central Admin afterwards because the domain accounts are no longer valid. Should we change all accounts to local admins first, detach the db and change those accounts
as well? Or would a totally different approach make more sense? Any help would be appreciated..
Thanks in advance,
Alex

You need to build a new SharePoint farm, changing SharePoint server's domain membership isn't supported.
What you'll do is build a new farm, create the Web Application(s), etc. and then restore SQL database backups from the old farm into the new farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Do I need to enable trust between domains in the following scenario

I have a domain x and domain y on 2 seperate machines. My client logs into domain x does stuff and logs out. The same client now logs into domian y and needs to do stuff, but the second domain kicks out the client by throwing an exception saying "invalid subject" etc .. But the same scenario works if I enable trust between both domains or have my client restart. What should I do so that the client can logout of domain x and login to domain y without having to enable trust betweeen domain x and y and without having to restart the client.
Thanks
Prashanth

Hi Mike,
there is no switching circuitry on the UMI, that could disable the Iso Power outputs and there is nothing you need to configure in MAX. If you can't measure a voltage between Iso Power and Iso Common pins on the Dsub outputs, the UMI might be defective (e. g. blown fuse). Please contact your local NI branch for repair options.
Thanks and kind regards,
Jochen

Unable to create a first Domain in JDI CMS system

Hello All,
I have installed JDI and configured SLD and everything seems to be working properly. However, when I go into the CMS service (http://localhost:devinf) and try to create a domain it tells me I am creatinga customer domain and will not be able to transport out of it (OK, Fine), I click save and get a message that says only "unable to process request, please see system administrator".
I have one host serving as the SLD and name server. I am running a J2ee add in system with ABAP as persitence layer. My SLD is set to use Database as persistence layer. I tried changing it to ABAP and trying again but that did not fix it. I have created all users according to plan (CMSadm) and given him all the rights therein.
I have configred the name server in DTR as well, still no luck, still get the message when trying to create a domain in CMS for the first time.
Anyone else seen this or have any ideas?
Thanks!!
Tommy

Hi,
Actually this is not the right place for your question,please look in to Java Development infrastructure Forum.However i will answer your query.
System admin has to create domain(Three letter word)
if you check this url http://<server>:port/devinf as you mentioned you will get DTR,CBS and CMS.With cmsadm user you can create track before that you have to creta Software component.
if you post what, message you are getting it helps us to answer.
Regards,
RK

Unable to create and configure Domain in CMS

Hi,
I have created product and software components and i have defined the usage dependencies also.
After that while creating domain in CMS I am getting the following error
*SLD (URL http://pwdf3065:50000) server exception: User credentials are invalid or user is denied access*
Please help me folks...
Thanks
Harsha

1. Check if you have NWDI.Administrator Role
2. Make sure either NWDI.Admin or you have lcr.administrator role.
lcr admin is for updating SLD.
Is your SLD on a different server than NWDI?
Regards,
Nitin

No authentication prompt using DFS links to fileserver into another domain with no trusts between both domains

Users , Fileservers and DFS root with DFS links in Domain A all work fine.
each users from Domain A have also credentials and passwords from Domain B
There is NO trust between Domain A and Domain B, both Domains are in different site connected with VPN-tunnel.
Projectdata is stored at fileservers in both Domains. Now DFS links are added in the Domain A to a fileserver from Domain B
When users from Domain A connects to fileserver in Domain B first he/she gets a prompt to authenticated, then DFS link to the fileserver in Domain B work.
When users just use DFS link they get a prompt "not accessible" + "Logon failure unknown user or bad password"
No prompt is given to users from Domain A to enter the credential for Domain B.
We cannot created a trust between these 2 Domains due other policy's

Hi,
According to your description, there is no trust between domain A and domain B, right?
Based on my research, if there is no trust between domains/forests, then it is not possible
to share information across domain boundaries, because without trust, no authentication traffic can be passed across domain/forest.
That is why the user cannot access the file he has rights to access across domain.
Here is an article below for your references:
Trust Technologies
http://technet.microsoft.com/en-us/library/cc759554(v=WS.10).aspx
I hope this helps.
Amy Wang

Global Trust Between WebLogic Domains ?

Hi there,
Need clarification on "Global Trust between weblogic domains "
My scenario :
WebLogic Version installed                : 10.3.5.0
Linux physical machines                     : 2
          x - machine
          y - machine
Now, I've created new domain with AdminServer , and 2 managed servers on x-machine. And, 2 more managed servers on y-machine.
     x-machine --> AdminServer + 2 managed servers
     y-machine --> 2 managed servers
Created a cluster for all the 4 managed servers.
My question : Though we have created 2 domains -
                                                                                     Domain 1- on x-machine where we have Admin + 2 nodes
                                                                                     Domain 2 - on y-machine where we have 2 nodes
Now , do we require to create/enabe "Global trust between these domains to communicate ? And, enable cross-domain security also ? Is this required ?
Or in which situations we require to enable trust between domains ?
Can someone explain me.
Thanks

Looking to this Oracle Doc >> http://docs.oracle.com/cd/E24329_01/web.1211/e24375/basics.htm#BRDGE128
"Typical tasks required to manage a messaging bridge using the Administration Console include
Creating a trusted security relationship. See "Configuring Domains for Inter-Domain Transactions" in Programming JTA for Oracle WebLogic Server"
And, clicking the link to Configuring Domains for Inter-Domain Transactions, there's two types of communications:
Inter-domain—The transaction communication is between servers participating in transactions that are not in the same domain.
Intra-domain—The transaction communication is between servers participating in transactions within the same domain
Check the rest of the doc to know how to configure each type, and apply the one that matches your case..
Hope it helps
Regards,
Mohab

Unable to create a JMS Message bridge between Weblogic 12c and Weblogic 8.1

Hi,
I am unable to successfully create a Message Bridge between Weblogic 12.1.1.0 and Weblogic 8.1. The error message being received is:
eis/jms/WLSConnectionFactoryJNDINoTX > ResourceAllocationException generated by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory, url = t3://localhost:8001, user name = System) ">
The error on the monitoring tab is WARN: failed to connect to target.
Both domains are deployed on one box for testing purposes. The bridge itself is deployed on Weblogic 12c. The areas of config that may be of interest are:
<server>
<name>AdminServer</name>
<listen-address></listen-address>
</server>
<messaging-bridge>
<name>Bridge</name>
<target>AdminServer</target>
<source-destination>JMSBridgeSource12c</source-destination>
<target-destination>JMSBridgeTarget81</target-destination>
<selector>Test</selector>
<quality-of-service>Exactly-once</quality-of-service>
<qos-degradation-allowed>false</qos-degradation-allowed>
<durability-enabled>true</durability-enabled>
<idle-time-maximum>60</idle-time-maximum>
<async-enabled>true</async-enabled>
<started>true</started>
<preserve-msg-property>false</preserve-msg-property>
</messaging-bridge>
<app-deployment>
<name>jms-xa-adp</name>
<target>AdminServer</target>
<module-type>rar</module-type>
<source-path>D:\ORACLE~3\WLSERV~1.1\server\lib\jms-xa-adp.rar</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<jms-bridge-destination>
<name>JMSBridgeSource12c</name>
<adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
<user-name>System</user-name>
<user-password-encrypted>{AES}nfFzhs+0J/O2Cenf0g4zDsDyvIKENMF7cZ5sAVUehX0=</user-password-encrypted>
<classpath></classpath>
<connection-factory-jndi-name>JMSConnectionFactory12c</connection-factory-jndi-name>
<connection-url>t3://localhost:7001</connection-url>
<destination-jndi-name>JMSQueue12c</destination-jndi-name>
</jms-bridge-destination>
<jms-bridge-destination>
<name>JMSBridgeTarget81</name>
<adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
<user-name>System</user-name>
<user-password-encrypted>{AES}eBkO46cHvtrzEraOMIOdXow6WvEAtA4NCUDTQ4mC+9w=</user-password-encrypted>
<classpath></classpath>
<connection-factory-jndi-name>JMSConnectionFactory81</connection-factory-jndi-name>
<connection-url>t3://localhost:8001</connection-url>
<destination-jndi-name>JMSQueue81</destination-jndi-name>
</jms-bridge-destination>
I have enforced global trust between the two domains. I have disabled the guest user on the 8.1 domain but can’t see where to do this on 12c.
Any suggestions would be much appreciated.
Regards
John
Edited by: 958336 on 13-Sep-2012 03:11

Thanks for the recommendation. Unfortunately it did not help solve the problem.
I have managed to get a JMS bridge working between 12c and 8.1 by including the 8.1 weblogic.jar on the classpath. This setup was using eis.jms.WLSConnectionFactoryJNDINoTX.
After trying to use the adapter that supports transactions, WLSConnectionFactoryJNDIXA I received the following error:
java.lang.IllegalStateException: can only be called from server
Is this because the Weblogic 12c server now views the 8.1 server as being foreign?

Authentication needed after doing trust between two different domains.

Hi There,
I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
NY domain can get the users and computers of 2012DC1
but 2012DC1 can't get the users and computers of NY
Date and time are the same,i am always getting this error
The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller capable of servicing the request (for example a writable domain controller). Otherwise,
the following steps may be taken to resolve this problem:
If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.
If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':
If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.
If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
Can you please help me in this error.
Thank You in advance.

Hello,
"The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Enabling Trust Between WebLogic Server Domains

Hi everyone,
We have two sites, each one running one WL 8.1 instance. The problem is that we have different users in each one, and they need to access both sites (using a RMI call).
When the user is created in both sites, there is no problem. But we do not want to replicate all users in all sites.
So this is what we are trying to do:
Create the user in one site and enable trust between Weblogic Server domains (giving both sites the same password), so once one user is authenticated, the other site will not try to authenticate this user again. But since this user does not exist in the other site, he has no permission to do anything at all. Because of that we receive the following error message: "User a7ax does not have permission on br to perform lookup operation."
Does anyone have any idea about how we can handle this, and enable the users to use other sites, without creating the user in both sites?
Thanks in advance.
Cesar

In order to debug this issue you need to determine which kind of security has been applied on the web service deployed on remote weblogic server.
Whether it requires username/password from the calling web service ?
or it requires any kind of digital certificate from the calling web service etc......
the most usual secnario where cross-domain security is required is as:
If a user- Test calls a service- ServiceA on Weblogic Domain-domainA and provides its credentials and is authenticated properly.
Then if this service requires to call another service -ServiceB on another Weblogic Domain - DomainB which is also secured then there should be a cross-domain trust should be enabled between the domains DomainA and DomainB so that the subject populated in the domainA can be transferred to DomainB.
Now you should determine whether this is the secnario you are trying to achieve or it is something else.
Also try to use the following debug flag in the DomainB where the provider service is deployed to get the exact reason why it is failing to verify the security check.
-Dweblogic.DebugSecurityAtn=true
This debug flag is enabled as JAVA_OPTIONS.
Thanks,
Sandeep

Two-way forest trust between two (single domain) forests with multiple identical user ID's

Domain and forest levels - Windows 2003 (they both have one 2008 R2 DC)
We need to create a two-way forest trust between two separate single-domain forests. The problem is that these two forests already access each others resources through a S2S. Users have the same login names and passwords on both forests/domains. Now, we
are combining their infrastructures and need to set up a trust. From what I'm reading, you can't create forest trusts if you have the same SIDs, user ID's, or computer name in each of the forests.
I'm looking into AD migration tool to copy the userSIDs (SID history?) between forest/domain, deleting the user ID's in the domain we migrated from, and then setting up the trust, but I'm leery about doing it this way as there is no easy 'recovery' should
something go wrong.
Any suggestions for the easiest way to setup this forest trust?

Hi,
To eliminate your worries, two user accounts have the same user name doesn’t mean that they have the same SID. Moreover, the user’s SID remains the same even after it has been renamed.
The SID for domain account/group consists of a
Domain Identifier and a Relative Identifier. Domain Identifier is unique in every domain within a forest, and a Relative Identifier is unique within domain. It is unlikely that two user accounts with or without the same account
name from two forests have the same SID.
The Technet article you mentioned is talking about duplicate SIDs instead of “duplicate computer name or user account”, I will submit a change request to Microsoft about this.
If there are duplicate SIDs when you create forest trust, you need to delete one of them as the article guides.
Here are some related articles below for your references:
How Security Identifiers Work
http://technet.microsoft.com/en-us/library/cc778824(v=WS.10).aspx
Security Identifier Structure
http://technet.microsoft.com/en-us/library/cc962011.aspx
Security Identifier
http://en.wikipedia.org/wiki/Security_Identifier
I hope this helps.
Amy Wang

COPA unable to create as charac data element with LIFNR as domain HELP ASAP

Hi
We had a data element created with KUNNR as domain.
We added to PAPARTNER STRUCUTRE and created as characteristics in our operating concern.
Now there is a need to change to LIFNR as domain instead of KUNNR.
There we created a new dala element with LIFNR as domain and added to PAPARTNER
structure and when we tried to create them as characterisc system did not let us transfer to
our operating concern.
We do not know why we are unable to create this characterisic.
When we tried to create the characteristic it was shown under 'Transfer from'
But when we wanted to move right to left it was shown under 'grey' status and not ready for transfer.
We need a solution very urgent and any help is greatly appreciated.
Thanks
Raj

Hi
KEA0 - Display Data Structure
Now, Extras > Chars > Unlock
after this try to push from right to left
br, Ajay M

Unable to create new domain for ORM in Weblogic 8.1

Hi,
I have installed Oracle Role Manager(ORM) 10.1.4 and to run ORM in weblogic i have to create a new domain for ORM.
I tried to create a new domain in weblogic 8.1 in configuration wizard by selecting the orm_createdomain_template_103.jar but i m getting an error
"There is a problem with the template".
This template is to create new domain for ORM in weblogic 10.3
Kindly help me to resolve this issue.
Regards,
Manju

I have installed ORM 10.1.4.1 on weblogic 10.3
I have also created a new domain for ORM in weblogic.
When i start the Managed server using startManagedWebLogic.cmd i m getting the following
errort
t3://localhost:7004/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainr
untime'. Resolved 'weblogic.management.mbeanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(C
lientProviderBase.java:156)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(
ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnec
torFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFacto
ry.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainR
untimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.ja
va:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbean
servers.domainruntime'. Resolved 'weblogic.management.mbeanservers'; remaining n
ame 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
a:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
ava:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
6)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:21
4)
Truncated. see log file for complete stacktrace
>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to RUNNING>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Serv
er started in RUNNING mode>
Please help me to resolve this issue.
Regards,
Manju

Unable to create Trust between domains

Similar Messages

Maybe you are looking for