Unable to create two SourceSystem with same Logical System

Dear gurus,
The customer has expressed the need to connect a data source with the same Logical System name of the actual DS.
Infact, on the SCC4 the R3 Prod/qua/dev has the same LOGSYS.
The aim is to link the PROD/R3 system to the QUA/BW system.
During the creation of the DS on RSA1, an error message display that BW cannot create the Source because the Logical system is already in use.
All we know that on BI can not be two identical technical name, but if i CANNOT change the LogicalSystem on the SCC4, there is a workaround?
Can i map the new sourcesystem with another LOGSYS name?
Or the only solution is to change the logical?
Thanks in advance
C.C

Hi Sven and thanks for the reply.
unfortunately the customer chose to appoint the entire landscape with the same logical system name (policy), so that i cannot make this change on SCC4.
So, i have to link only one SourceSystem (or quality or prod)...but at least, i will make a refresh copy of the quality system
ps: i'm a Basis

Similar Messages

How to create two employees with same name as supplier record?

Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HY

Hello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik

Unable to monitor two databases with same name on two different hosts

I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
Can't we monitor two databases with same name on two different hosts?

you can... while saving the target,give a different name.. for eg target-2

BI - 2 OLTP with same logical system canu0092t be connected to SAP BI

Bi 7.0
SAP ECC 6.0
I am in a test environment in SAP ECC and SAP BI.
I have 1 SAP BI and 2 SAP ECC. Both SAP ECC have the same logical system name: 10.
I could connect the 1st SAP ECC to SAP BI, but I am not able to connect the 2nd SAP ECC because the logical system name is the same than the 1st one.
Question 1: is there a possibility / way to connect the 2nd SAP ECC without changing the logical system name?
Question 2: if I am in test environment what is the risk to change the logical name in SAP ECC?
Regards

Not solved.

How to create two prompts with same named object?

Hi to All,
I am a new user of OBIEE. Actually have only one column called creation date in my report. My requirement is in dashboard, I need to display two text boxes in same prompt with the name Beginning creation date and Ending Creation Date. Actually, I was able to do it with the operator "Between" but when i am doing it, I was not able to determine how can we get the values entered by the user for beginning date and ending date because both dates will get stored in the same prompt only (ie) in my "Creation date" prompt.
Also, I have an another question, In a single prompt I need to repeat the same object more than once. But When I tried it shows the error "same column exists.. so this action will be ignored". Please help.
Thanks in Advance,
Thenmozhi

Thenmozhi,
You can think about having 2 different prompts: the first one with the operator >= and the second <=.
For your second question you cannot have the same column in the same prompt more then once
Regards
Adil
PS:Please assign points and close the thread when your question is answered

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

Same logical systems for two environments productive

Hi gurus.
I have a question for ALE
There are two production systems a copy of another, who want to connect both to configure the ALE, but by mistake, both systems were the same logical system when they made the copy. Since this change takes months. At the moment I can not make this change in BDLS because it is a productive environment.
When trying to configure the ALE, I am have problems with the logical system name, although one of the settings I gave it another name when you configure the transaction BD64.
Guys, what I find solution to configure the ALE, without changing the logical system to a productive environments ??????
Regards,
Desiré

Hi Mark, thanks for the replay.
I understand also that the solution is to execute the BDLS to change the logical system and convert all tables to new logical system.
I don´t know how the process copy for both system productive.
The problem is that both environments are connected to BW, and other applications and they opened an OSS note to SAP consulting and and the answer given is that they did not recommend changing the logical system.
I thought if there was another way to configure ALE without having the problem of changing the logical system environments.
Regards,
Desiré

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

Two R3 servers have the same logical system name?

Can two R3 servers have the same logical system name present in the same network? We plan to clone our production server and let the clone reside in the same network. The clone is identical with the production server with the same SID, hostname, logical system name, but different IP address.

Hi
Check this [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm]will cleare you doubt
Regards
Uday

Two Desgination with same departmens in Table

I HAVE A SCANERI THAT THER IS DEFAULT ADMIN IN TABLE AND THIS ADMIN ADD FURHTER SUPERVIOSR,MANAGERS AND SENIOR MANAGERS THEN WHEN ADMIN FIRST TIME LOGIN AND CREATE ACCOUNTS OF SUPERVISOR,MANAGER,DIRECTOR
AND HERE IS THE TABLE
UserID UserName Password UserTypeID DepID FullName CreateDate DocID Email PhoneNumber DesigID
51 Noreen Fatima 2 NULL NULL 2014-02-04 NULL [email protected] 324234234 4
52 Admin Docum 1 NULL NULL NULL NULL NULL 3
53 Sundus Khan 1 2 NULL 2014-02-04 NULL [email protected] 031545646456 1
54 Hira Mansoor 1 2 NULL 2014-02-04 NULL [email protected] 0315546464 2
55 Sana Khan 1 2 NULL 2014-02-04 NULL [email protected] 2043829429304 3
56 sundus sundus 1 2 NULL 2014-02-04 NULL [email protected] 87687678678 1
here depid 2 is computer science and design id 1=supervsior 2=manager 3=senior manager 4=basic user
so when admin login and want to create again account of supervsior and their department is computer sciecne . . now there this is not a logic
beacuse supervsior account with department omputer science already exist so why admin create another supervsior with same department
i use this sp but this shows me error
ALTER procedure [dbo].[spadminreg]
@UserName nvarchar(50),
@Password nvarchar(50),
@UserTypeID int,
@DepID int,
@DesigID int,
@emailaddress nvarchar(50),
@PhoneNumber nvarchar(50)
as
if EXISTS(SELECT 1 from Designation where DesigID=@DepID)
begin
select @DesigID as 'SuperVisor'
end
else if(select 2 from Designation where DesigID=@DesigID)
begin
select @DesigID as 'Manager'
end
else if(select 3 from Designation where DesigID=@DesigID)
begin
select @DesigID as 'Senior Manager'
end
else if
insert into [Userss](UserName,Password,UserTypeID,DepID,CreateDate,DesigID,Email ,PhoneNumber)
values
(@UserName,@Password,@UserTypeID,@DepID,GETDATE(),@DesigID,@emailaddress,@PhoneNumber)
error
Msg 4145, Level 15, State 1, Procedure spadminreg, Line 19
An expression of non-boolean type specified in a context where a condition is expected, near 'begin'.
Msg 156, Level 15, State 1, Procedure spadminreg, Line 22
Incorrect syntax near the keyword 'else'.
Msg 4145, Level 15, State 1, Procedure spadminreg, Line 23
An expression of non-boolean type specified in a context where a condition is expected, near 'begin'.
Msg 156, Level 15, State 1, Procedure spadminreg, Line 26
Incorrect syntax near the keyword 'else'.
please help meee i will very thankful

else if EXISTS (select 2 from Designation where DesigID=@DesigID)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Struts- two actions with same path in struts config

hai
I am having html:select tag with two options (View And Download) in a form.My form signature is like <html:form action="select">.I mapped two options(View,Download) with same action path.When i click view it doesn't forwards(remains idle) and no error is shown.But i click download it forwards to the appropriate page.If iam having two tags with same action path the second is only working.This problem doesn't comes when iam having one tag alone.
My code is here:
-----------Select.jsp----------------
<html:form action="Select">
<html:select property="id">
<html:option value="view">View</html:option>
<html:option value="download">Download</html:option>
</html:select>
</html:form>
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewForm" type="ViewForm"/>
<form-bean name="download" type="DownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewForm"
type="ViewAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
</action>
<action path="/Select"
name="downloadForm"
type="DownloadAction"
input="/Select.jsp">
<forward name="success" path="/Welcome.jsp"/>
</action>
</action-mappings>
Can i have action tag with same paths like this.If not please provide me a solution

I have created two success pages.
I have created two findForward in my ActionClasspublic ActionForward execute(ActionMapping mapping,...............)
if(a==view)
return mapping.findForward("success");
else
return mapping.findForward("success1");
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewdownloadForm" type="ViewdownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewdownloadForm"
type="ViewdownloadAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
<forward name="success1" path="/Success1.jsp"/>
</action>

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Two Switches with same MAC+Priority running STP

Hi
what will happen if two switch with same MAC-ADDRESS and same STP priority will run STP , how will elect to the root bridge ???? how the STP process will handle this situation?
thanx

Well, first off, no two switches (or switchports) will have the same MAC (if they do, you're buying switches from the wrong, very bad place).
Every port of the switch will have (at least) one MAC of it's own.
Given the same priority for all switches/bridges on the LAN, the lowest switch/bridge MAC on the LAN will win as the root.
VLANS take on the MAC of the administrative interface ("CPU"): i.e., xxxx.xxxx.5000, the first port (i.e., fa0/1) is xxxx.xxxx.5001, the second (fa0/2) is xxx.xxxx.5002, and so on
If you do a "show interface", the MAC / bia is displayed in the second line.
Good Luck
Scott

Unable to create two SourceSystem with same Logical System

Similar Messages

Maybe you are looking for