Unable to Create Wifi Hotspot after OS update

I have just updated the OS on my Q5 to 10.2.424.  When I now try to create a WIFI Hotspot I get the message"Regulations in this country prohibit Mobile Hotspot usage."  This is not true and how do I roll back to the previous OS to get this working again?

 Apparently do do not know quite what a WiFi hotspot is. You don't create one on your computer you can access one if there is one in the vicinity of your computer. Read this for better understanding:
http://en.wikipedia.org/wiki/Hotspot_%28Wi-Fi%29

Similar Messages

  • Unable to create wifi hotspot on MSi GT70 2OC

    Hi,
    My laptop has killer wifi n1202 card. I tried to create a wifi hotspot on my laptop but it doesn't work.
    I tried every available software on the net and tried to create without software also through command prompt.
    But nothing seems to work.
    Has anybody faced same problem and has a solution for this ?

     Apparently do do not know quite what a WiFi hotspot is. You don't create one on your computer you can access one if there is one in the vicinity of your computer. Read this for better understanding:
    http://en.wikipedia.org/wiki/Hotspot_%28Wi-Fi%29

  • Can t create wifi hotspot

    Before update to mavericks, sometimes can't create wifi hotspot on my macbook pro 2010 MID . It solved by  turn on and turn off wifi few times.
    After update to mavericks , the only way to solve it was reboot.
    Anyone had a similar problem? THANKS

    Hi Julianchan94,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    - Judy

  • Create WiFi Hotspot with Command Prompt?

    I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong or if I need to follow anything else? Any help would be apprecited. 

    I think it is better to use Wi-Fi creator to create WiFi in laptop. Search 160 WiFi in Google!

  • Create WiFi Hotspot using the command promt

    I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong? Any help would be apprecited. 

     
    Hi ihtisham301, 
    Thank you for visiting Sony Community! 
    Try to connect any different device to your home network. If other device can't connect then you may contact your Internet Service Provided (ISP) for further assistance. 
    If other device can connect, then try to isolate the issue. You mentioned you cannot connect to the network but you were able to enter the credentials before connecting to the network. Try to ping any website, Start -> search cmd -> once in command prompt, enter ping googe.com and hit Enter. Check the Ping statistics. Try to ping your router as well. ping [router IP address] then hit Enter. Also boot the laptop in Safe Mode with Networking -> turn off the laptop, press the power button and immediately, tap the F8 key repeatedly. Once in Advanced Boot Options, select Safe Mode with Networking. 
    I'm not quite sure about the process that you did. I never tried that before. And another thing is, it seems that you are using a non-U.S. model of Vaio. We usually have Windows 7-64bit computer. We have limited information with non-U.S. model of laptops. 
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope my suggestions help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?

    How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?
    It works nicely over home wifi, but for example, i am sitting in my car, phone is in my pocket and I'm using the iPad, call comes in and i don't want to start digging for my phone.
    Is there any way?
    devices:
    iPad mini cellular (no SIM card at the moment)
    iPhone 5S
    Thanks!

    well yes, but it basically makes wifi for the other devices, it basically mimics wifi.
    as i get from your answer, it is not possible?
    it would be common sense to make it work this way also. directly from device to device. no bounce between WiFi router
    Then again, common sense is not that common these days...

  • I am unable to open my itunes after maverick update.  Any suggestions?

    I am unable to open my itunes after maverick update.  Any suggestions?

    Hi there sharonlarks26,
    You may want to try reinstalling the latest version of iTunes. Take a look at the article below for more information.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    -Griff W.

  • Can't connect to wifi network after iOS update

    Can't connect to wifi network after iOS update.

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

  • TS3899 Unable to access E-mail after new update

    Unable to access ER-mail after new update.  Most recomendations delete the account with contacts---any other solutions??

    Contact the email provider to troubleshooting.
    Delete and re-add the account.
    Without any details about the issue there is little to nothing that we fellow users can suggest.

  • Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

    Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

    I have heard rumours of an 8.1 update for developers. I just found another bug in 10.9.5. I am beginning to think that nobody should touch any update from Apple until they can get their very serious Q/A problems sorted out. This is getting bad.

  • Unable to set the ip address for hosted network client after creating WIFI hotspot

    Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
    HI all
    I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
    so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
    but the problem I am facing is slight different
    I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
    when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
    but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
    as soon as I close the window, the ip address also disappears
    when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
    when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
    so what cause the failure in internet connectivity but success in hotspot connectivity?
    check the screen shots...
    can u help me..
    its little complicated

    Hi,
    Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
    If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
    Roger Lu
    TechNet Community Support

  • Unable to load some websites after an update to IOS6

    I am unable to load some websites in both Safari and Google Chrome. This did not bother me until I found at that I cannot access some websites I can access before and frequent. I am unsure if this was caused by the update to ios6, but this incident only happened after the update. I am unsure as well if this is related to the problem of me unable to connect to itunes and app store after the update. I've fixed those by changing my DNS to 8.8.8.8 and changing the time trick. I've also noticed that twitter and some apps crashed a lot. I have no problem connecting to the wifi though. Thank you in advance.  

    Some additional details I have also noticed. Some images will not show or appears as a blue and white question mark in some websites. Even here in apple website.

  • Unable to create image buffer after RAM preview

    Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
    Some more details about my comp:
    1920x1080 @ 29.97
    Ray-traced 3D
    About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
    Running Windows 7 Professional
    i7 2600K
    32GB RAM
    2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
    508GB free on my 2TB internal drive where the project and cache lives
    From my GPU info window in case it's useful:
    Fast Draft:
    Available
    Texture Memory:
    600.00 MB
    Ray-tracing:
    GPU
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GTX 570/PCIe/SSE2
    Version:
    3.0.0
    Total Memory:
    1.20 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    4.2
    Devices:
    2 (GeForce GTX 570, GeForce GTX 570)
    Current Usable Memory:
    1.04 GB (at application launch)
    Maximum Usable Memory:
    1.25 GB

    Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
    Mylenium

  • SOAP unable to create a socket after OS upgrade OS/400 V5R4 to V7R1

    Hello,
    after we upgraded our OS from System i V5R4 to V7R1 we have problems with our SOAP adapters.
    In the runtime workbench and also in the SXMB_MONI the following error occured:
    SOAP: call failed: java.io.IOException: unable to create a socket
    Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
    Before the OS upgrade the adapter rans without any errors and we tested the connection to the partner
    with an system running V5R4 with success. So it seems to be an error that came with the OS upgrade.
    Any idea? Had any one the same error after migration to V7R1? Thanks for your help.
    Best regards,
    Matthias

    Hello,
    we found out that the error is attached to DNS and Java stack. Our ABAP stack can set the url to the correct IP adress, if we configure a entry in SM59. Also the java stack calls our partner over SOAP with IP adress, but not with url. The urls are stored in the local host table, so we suppose that the java stack doesn't use the local dns table and doesn't ask our dns server for the right ip adress.
    Does anybody know this issue? The only change we did is upgrade OS/400 from V4R4 to V7R1. If a mod see this, I think it make sence to move this thread into the forum SAP on DB2 UDB for i5/OS (DB4). Thank's.
    Matthias

  • DPM 2012 R2 Unable to create protection groups after Cluster Migration

    Hi Team
    we have an issue relating to DPM 2012 R2. In our environment we have a Hyper-V Cluster and we recently did a Cluster Migration since Hyper-V Cluster was upgraded to Windows Server 2012 R2.
    Before the upgrade, Windows Server 2008 R2 Cluster was protected by DPM Environment. After we upgraded we are unable to Create new protection Groups existing the new cluster and when we select VMs it's not showing up any members.
    Please let us know how we can solve this issue since the Cluster Nodes and the Cluster Name is different from previous Cluster, we were expecting that DPM would allow us to create new Protection Groups while preserving old protection groups for recovery later
    if needed. 

    Hi,
    you need to stop the Protection of the old HyperV Datasources
    Clear the Cache of the Protectiongroup,
    and read the new VM to Protectiongroup
    Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
    facebook.com/techguyat |
    youtube.com/techguyat

Maybe you are looking for