Unable to create working USB live medium

I seem to have a quite common problem, at least I found a few very similar topics on the forum. However, I didn't find any that offered a solution I could use.
My secondary harddisk with arch broke so I replaced it. Now I want to reinstall arch but before I started I wanted to update my live USB device, from where I installed arch the first time. I again used Live Linux USB Creator but I'm getting the following message when booting from the USB:
SYSLINUX 4.06 EDD 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al
Unknown keyword in configuration file: PATH
boot/syslinux/whichsys.c32: not a COM32R image
boot:
Pressing tab shows the options "select pxe sys" but each gets me the message that the kernel image couldn't be found.
I checked the USB Flash Installation entry on the wiki and tried different methods to create the bootable device. All with the same result so I assume the problem is with the new distribution. I saw a few workarounds but none that I could try on Windows (which is all I can successfully boot at the moment unfortounately).
Thanks in advance

mystyfly wrote:
My secondary harddisk with arch broke so I replaced it. Now I want to reinstall arch but before I started I wanted to update my live USB device, from where I installed arch the first time. I again used Live Linux USB Creator but I'm getting the following message when booting from the USB:
SYSLINUX 4.06 EDD 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al
Unknown keyword in configuration file: PATH
boot/syslinux/whichsys.c32: not a COM32R image
boot:
https://bbs.archlinux.org/viewtopic.php … 9#p1344629

Similar Messages

  • Unable to create new windows live id......the mess...

    i m unable to create new windows live id.
    the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider" 
    i stolen my nokia music id password...so what can i do???????????????????

    mallar wrote:
    i m unable to create new windows live id.
    the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider" 
    i stolen my nokia music id password...so what can i do???????????????????
    why would you steal your music id password? ..nokia id / account is different from windows live id btw.
    maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials.

  • Unable to create working dynamic distribution list based on manager

    Hi,
    I am struggling to create a working dynamic distribution group. I am following the instructions at http://help.outlook.com/en-gb/140/Dd264647.aspx.
    My intent is to create DDG's based on a user's manager and their job title. In my org, sales managers will typically have 3 teams reporting to them. In our AD, this would be marked by a 3-4 letter acronym in the job title field (CSO,DCO,SDCO).
    I am trying to create distribution groups for use by their manager by having the manager and job title item as the filter, using the following script:
    New-DynamicDistributionGroup -Name "GROUPNAME" -RecipientFilter {(RecipientType -eq 'UserMailbox') -and (manager -eq 'Managername') -and (title -eq 'ACRONYM')}
    As an aside, I am unable to find if the manager object should be an alias, upn or ad object. I've tried with all with no success.
    No matter what permutations of the above script I try, nothing seems to work. The group creates, but does not work at all.
    Any help you can provide would be very much appreciated!

    Hi Ed,
    I did try that, and as it turned out, I was using the wrong powershell from the start.
    The commands above are for Office 365, not on-prem Exchange 2013. Having spoken to Microsoft, it seems like the AD object for manager may not be a filterable option at all, I'm waiting to hear back.
    If this can help jog anyone's mind, the commands we're looking towards now look something like this:
    New-DynamicDistributionGroup -Name "testname" -Alias "testname" -IncludedRecipients "MailboxUsers,MailContacts" -OrganizationalUnit "domain.local/users" -ConditionalDepartment "Test" -RecipientContainer "domain.local"
    We're still looking for a filter for manager in there, and I'll update the thread if I get anything worthy of note. Bear in mind that it's going to be difficult to settle for anything less than the manager object to filter by, as our requirements pretty
    much demand it.
    Thanks all.

  • Unable to Create Work Document in SharePoint 2010 by one user

    Hi,
       We have a unique issue. One user in our organisation is not able to create Word Document in our SharePoint environments.
    We have SharePoint 2010 Enterprise Edition and Office 2010 Professional Edition. This issue is faced by only one user in our organization. no issues for thousands of other users.
    We tested with our multiple SharePoint environments of different type of web applications. No where user is able to create Word Document using New Document functionality.
    User is able to create Excel, PowerPoint documents of all extensions. User is able to upload Word Document. User is able to Edit the existing word documents both in browser and Word client.
    Since it fails in all SharePoint environments, I am suspecting some common failure point like User Profile issue, CAL etc. Any suggestions from experts like you is highly appreciated.
    Thanks in advance.

    Hi Sivanandham,
    Could you please test two more options below with the user for narrowing down the issue scope?
    Create a new content type inheriting from content type Document and then upload a new word file as the template to the new content type.
    Change the word template for the content type with issue when the user creates a document from the content type.
    Please also check ULS log for more detailed error for further research.
    Best regards,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Unable to create working OIM client

    I developed a simple servlet to test initialization of OIM client in weblogic 10.0 and during initialization i am getting following exception:
    GMS: address is oam:51631
    java.lang.NullPointerException
    at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
    at $Proxy75.isChallengeQuestionsSetForSelf(Unknown Source)
    at Thor.API.tcUtilityFactory.<init>(Unknown Source)
    at...
    I am using following authwl.conf:
    xellerate {
         weblogic.security.auth.login.UsernamePasswordLoginModule required debug="true";
    Any ideas?
    Thanks,
    Alex

    Looks like the security questions are not set for the user through which you are trying to connect to OIM. Try to login once through admin console, set the questions shown at the first time logon and then try to re-run the client again.
    Hope it works.

  • Windows 2008 r2 Cluster not starting - "unable to create security manager worker queues"

    Hello, following a power outage, we got a serious cluster error preventing the start of the cluster.
    We are trying to interpret the only four lines the cluster.log generates :
    00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
    00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
    00000330.000016cc::2014/09/26-10:44:06.348 ERR   [CS] Unable to create SecurityManager worker queues, 2
    00000330.000016cc::2014/09/26-10:44:06.363 ERR   Error 6
    AND if starting clussvc manually :
    Got ERROR_FILE_NOT_FOUND(2)' because of 'Error while creating the Security Manag
    er's Thread Pool' in
        000007fe:fd69940d( ERROR_MOD_NOT_FOUND(126) )
        00000000:001ff190( ERROR_MOD_NOT_FOUND(126) )
    We suspect a DLL problem (because of mod not found), but we are unable to find the ones involved even with process monitor.
    clusdb hive seems ok.
    The situation is serious, can anybody help, please ?

    Hi RodV,
    This error usually caused by cluster service fails to open a 
    handle to the \NUL device, Device manager shows the device instance in error state.
    Please check whether the following register value still exist, if not please backup your current registry then add the it.
    HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\ENUM\ROOT\LEGACY_NULL\0000\CONTROL
    ActiveService REG_SZ Null
    I am glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hi,  My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version.   I have the original version DVD with me.   But i am unable to install.   Can i create an USB installation drive from the DVD or can you please

    Hi,  My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version.   I have the original version DVD with me.   But i am unable to install.   Can i create an USB installation drive from the DVD or can you please send me a link to download the Middle east version of Adobe CS 5.5 design premium.   After downloading i can enter the product key which i had bought.  appreciate if anybody can offer a solution urgently.   All my jobs are held up. thanks

    Download CS5.5 products
    Mylenium

  • Unable to get mouse (USB) or serial working.

    I have a MSI 865P board.
    Ive tried all drivers ive seen this far and am unable to get a USB installed or serial working. Any ideas?

    Well due to the Weak PSU it is making it very difficult for allof your Componants to work together under some Load, as when installing windows, your memory is not recieving enough Power, so therfore the OS is Not installing Properly....The only thing that you can do to remedy the Situation is to Replace the PSU, with a Quality, More Powerful, PSU such as a Enermax 465Watt, or a Antec 480 Watt, Unit Because for about $99US you can get a PSU that you wont have to worry about replacing until you forgot how long you have had it........And the Funny thing is, That the PSU is the Most important componant in the PC, if it does not work, or work well, then rest assured nothing else will ...Plug all of your individual componants into this, and you will be amazed on how much Power you really need >>>>>>>   http://www.adecy.com/psu/   ....................Sean REILLY875

  • Hi Folks,   I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even  i am unable to create a report using analysis.

    Hi Folks,
      I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even  i am unable to create a report using analysis.
    Thanks in advance

    i have also tried that but no use can u give me any other way.......

  • Unable to create windows live id

    Im not able to login to Market Places in my nokia Lumnia 800 handset to download network setup applications. I am unable to create windows live id.
    Pls help
    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

    You cannot download from Marketplace without any windows Live ID as your ID will reflect purchases you made on the store. To help you with your concern, If you have Hotmail or MSN account, you can use that as your LIve ID. You can also use WLAN connection to download Network Setup from marketplace. 
    You can also check this site for further assistance.

  • Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

    Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

    In some folks' version of the world, you have plenty of ways. YOu have the aforementioned services, you have iCloud, all you need is an internet connection and you're good to go. And that works perfectly...if you always have the internet.
    If you want more non-internet dependant ways, then the best way to let Apple know is to send them feedback. They don't monitor or respond to this forum (Beyond removing rule breaking posts) but they do at least log feedback. However, the lack of a file manager will always be an obstacle. There are some apps out there that have at least a pseudo file manager - as in the ability to move documents into multiple other apps. I have Readdle Docs which I can use to download and move things around with, but again, back to the internet or wireless.

  • KDEmod - Konqueror does not work (Unable to create io-slave:)

    I found this issue when I started investigating why Kopete was not connecting to MSN.  I found that Kopete was tied to Konqueror/KDElibs for several things so I tested konqueror and whaddayaknow.  Konqueror is broken.  When I attempt to connect to any website http or https I get the message below.
    An error occurred while loading http://www.yahoo.com:
    Could not start process Unable to create io-slave:
    klauncher said: Error loading 'kio_http'.
    Any Ideas?  I have pacman -Syu today and still no change.
    Thanks!
    Ether..

    put
    [kdemod-testing]
    Server = http://kdemod.ath.cx/repo/testing/i686
    before your kdemod current entry in /etc/pacman.conf
    and give pacman -Syu

  • Unable to create image buffer after RAM preview

    Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
    Some more details about my comp:
    1920x1080 @ 29.97
    Ray-traced 3D
    About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
    Running Windows 7 Professional
    i7 2600K
    32GB RAM
    2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
    508GB free on my 2TB internal drive where the project and cache lives
    From my GPU info window in case it's useful:
    Fast Draft:
    Available
    Texture Memory:
    600.00 MB
    Ray-tracing:
    GPU
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GTX 570/PCIe/SSE2
    Version:
    3.0.0
    Total Memory:
    1.20 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    4.2
    Devices:
    2 (GeForce GTX 570, GeForce GTX 570)
    Current Usable Memory:
    1.04 GB (at application launch)
    Maximum Usable Memory:
    1.25 GB

    Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
    Mylenium

  • I am trying to work on Live Cycle Mosaic 9.5 and I have downloaded FlashBuilder 4 and trying to con

    I am trying to work on Live Cycle Mosaic 9.5 and I have downloaded FlashBuilder 4 and trying to configure the mosaic plugin "LiveCycle Mosaic ES2 Plugin for Flash Builder 4" in Flash Builder as per following directions given on adobe site:
         "Add the following two update sites via Window > Preferences > Install/Update > Available Software Sites (names below are suggested/optional):
    Name: Galileo Location: http://download.eclipse.org/releases/galileo/
    Name: RIA Tooling Location: select the LiveCycle Mosaic ES2 Plugin for Flash Builder 4 ZIP file.
    Install RIA Tooling Feature: In Help > Install New Software, choose ("Work with") RIA Tooling Site.
    Select and install Adobe LiveCycle RIA Tooling."
    But I am getting the following error:
    "Cannot complete the install because one or more required items could not be found.
      Software being installed: Mosaic Tooling Feature 9.5.0.0-20100629-2-241916 (com.adobe.livecycle.ria.tooling.feature.feature.group 9.5.0.0-20100629-2-241916)
      Missing requirement: Adobe LiveCycle RIA Tooling Mosaic Core_UI 9.5.0.0-20100629-2-241916 (com.adobe.livecycle.ria.tooling.mosaic.core_ui 9.5.0.0-20100629-2-241916) requires 'bundle org.eclipse.wst.sse.ui 1.1.0' but it could not be found
      Cannot satisfy dependency:
        From: Mosaic Tooling Feature 9.5.0.0-20100629-2-241916 (com.adobe.livecycle.ria.tooling.feature.feature.group 9.5.0.0-20100629-2-241916)
        To: com.adobe.livecycle.ria.tooling.mosaic.core_ui [9.5.0.0-20100629-2-241916]"
    Please, suggest me how can I solve this problem to configure mosaic plugin on flash builder 4.

    Thanks CSound1.
    Bootcamp Assistant will read a DVD or an ISO file containing Windows retail versions and create a USB. What installation media for Windows do you have?
    If you have a DVD drive and connect to your MAC (or if you have a built-in optical drive), put in your DVD for Windows, Run Disk Utility as indicated and click on the DVD to verify that there are no issues with the media.
    Are you following the Bootcamp installation guide available from the apple website?

  • [URGENT HELP] Why is cannot install Windows 7 on my X120e? ERROR : Setup was unable to create..

    i have got X120e from my college with ubuntu 11.04 installed. But my half of softwares dont work on this Lunix OS so decided to install windows 7, downloaded officially as i have keys for activation.
    I used USB drive to install, Windows 7 setup sucessfully started on boot up but its getting error
    "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
    I have not connected any other devices.
    My Hard disk is NOT dynamic, its basic.
    I have contacted lenovo service centre, but this are taking up calls.
    I am fed up of this, please help me..
    I have exams coming and i need this urgently.
    Solved!
    Go to Solution.

    Hello,
    Do you just want to delete the Ubuntu partition?  If so, you may be able to do by booting from the Microsoft Windows 7 installation disc, pressing Shift+F10 to get to a Command Prompt, and then using the DISKPART.EXE program to erase the hard disk drive.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Maybe you are looking for