Unable to cretae InfoPackage on DataSource (BI7.0)

Hello,
Im Using BI7.0, After activating 2LIS_11_VAITM on ECC 6.0 and Replicated on BI7.0
When I try to create InfoPackage system is throughing this error message.
"No active transfer rule for DS 2LIS_11_VAITM and source system D01044; create first"
Im confuse about this error message it says "No Active transfer rule" but in BI7.0 we don't create transfer rule anymore right
We just  Create InfoPackage, Transformation, DTP
Anybody have  any idea about this error message.
Thanks

Since u r source system is ECC 6.0 , most of the datasources are available as 7.0 version except few businesses like HR.
When u replicate the datasources, u will receive a prompt wether to replicate as 7.0 datasources or 3.x. Here if u select as 7.0 datasources, then no need to migrate the datasource.
When u create Generic datasource (in RSO2), that is created as 7.0 datasource and replicate it as 7.0 datasource.
And u can easily Identify the 3.x datasource. In RSA1, u can see a small ''SQUARE' icon infront of each 3.x datasource
Edited by: Mr. V on Jul 23, 2008 2:13 AM

Similar Messages

  • Support Pack 13 - Unable to add InfoPackages to Process Chains

    Hello
    We are having an issue of being unable to add infopackages to process chains.  We are at Stack 12 (SP13).  Any one else encounter this?  Please send suggestions.
    Thanks,
    Praveen

    Hi,
    We are having the same issue here at our client site.  Any help is appreciated!
    Thanks,
    Doug

  • Unable to extend the standard datasource 2LIS_13_VDKON

    Hi
    we are unable to extend the standard datasource 2LIS_13_VDKON on the
    SAP by the following fields: MCKOMV-KNUMA_BO, MCKOMV-KNUMH and MCKOMV-KNUMV. We allways get the error message "End phase 002 - D0322".
    best regard

    Hi farchid,
    i checked that one, but you can ignore that one.
    please check the data source status is green that's it. after including that fields in the data source the status change to red. then go to data source maintenance screenselect the field selection check boxand then save it.
    now the status changes to yellow.
    now select inactive link against your data source in job control--status will turn as green.
    now you can do the set up table fill up for that data source.
    before doing the transport please make sure the following conditions. this will be displayed when your enhancing the data source.
    Extract structure MC13VD0KON generated successfully, see long text
         Notifications MCEX 027
    Diagnosis
         The extract structure was generated successfully.
    Procedure
         Now choose the maintenance screen of the DataSource. After that, the
         status display (traffic light) jumps from red to yellow.
         Please make note of the following before you transport the changed
         structure MC13VD0KON into another system:
         o   Run the transport when the target system is not being booked.
             Otherwise you will need to initialize it because documents are lost
             during this time. 
          o   None of the clients in the target system in the V3 update for the
         application 13 should contain data. If you are unsure, start the V3
         update of the application 13 in all clients.
    o   If there is still data in the central delta management of the target
         system, it must be retrieved by BW before the transport takes place.
    o   If you have already reconstructed within this target system, it may
         be that the data still exists in the reconstruction tables. After
         the transport, you can no longer transfer these entries into BW. You
         must delete the contents of the reconstruction tables of the
         application 13 in the target system and run another reconstruction
         if need be.
    o   If there is an update log in the target system, you cannot read the
         log data of the application 13 after the transport has been run. You
         can only read it again once data is booked and the last log entry
         overwritten.
    Use the report RMCSBWCC to display a log for the changed extract
    structure in the target system, to see if any of the above problems
    exist. An additional switch deletes all update logs for the application
    of the selected extractor.
    Please also note that you must reactivate the transfer structures when
    you change the extract structure after replicating a DataSource.
    hope this help you
    regards
    harikrishna N

  • Unable to create  Transformations on DataSource  in BI7

    Hi ,
      Previously I worked on BW3.5. Now I am working on BI7. While creating Transformations on Data Source, It is giving error "Message SY530". It is giving "Cannot Generate proposals" if I create Transformations on InfoSource.
        Same message I am getting for DataTransferProcess also ie " Cannot generate proposals".
    Please help me in this regard.
    Please give me step by step procedure in creating DataSource,Infocube and loading data into InfoCube from Flatfile.
    Thanks,
    Jaswantha

    hai,
    u follow the steps.
    1. go to data source.
    2.right click create the data source.
    3.load example data.
    4. u assign template name.that will copy the ur info object.like char length all.
    5.activate it
    6.u upload the flat file. it will stores only psa.
    7.go to info provider .
    8.create ur cube or ods.
    9.right clike . give the transformation process.u assign that data source name.
    10.now u not get any probs.the proposals atomaticaly generate.because u give the template .
    11.activate it.
    12.create dtp.
    13.execute dtp.
    14. now ur flat file data upload succesfully in ur cube or ods.
    thanks.
    if its usefull assign points.
    prakasu.

  • "Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

    Hi,
    Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
    I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
    Thanks,
    Taehoon.

    Hi,
    Why your using conversion routine at info pack level?
    Actually conversion routine already defined for info object 0MATERIAL, general tab.
    at info pack level, remove conversion routine MATN1 and don't give any selections.
    First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
    Thanks

  • Unable to find buisness content datasources

    hi sdn,
    I'm checking follwing datasources in rsa5 and rsa6 in r/3 sides but unable to find it out
    2LIS_01_S262
    2LIS_01_S261
    2LIS_01_S260
    2LIS_01_S263
    pls guide me from where to find

    Hi Rubane,
    these are the old LIS structure and you are not suppose to use these. look for new structures like 2LIS_11, 2LIS_12... which have replace these.
    Also have a look at LO Cockpit Web log by Roberto to understand it better -
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Also there are many more by him
    Hope it helps
    Regards
    Vikash

  • Unable to see the generic datasource in BI system

    Hi All,
    I have created the Generic datasource in R3 using Function Module. i could see the Datasource in RSA6 .When i have replicated i could not find the datasource in the BI system .The source system is connected perfectly.could you please let me know the reason or im missing anything
    Regards
    AK

    thanks for your reply.
    One more point is i could not find the application component hierarchy in BIW.i tried the RSA9 too
    In R3 i have saved in MM Application component.
    Regards
    AK

  • Unable to connect database by DataSource in tomcat5.5 plz help to me

    hi,
    i want to connect Database through DataSource in Tomcat5.5 with mysql
    i wrote one servlet , made change in server.xml, web.xml.
    when i access it show exception
    java.security.AccessControlException: access denied (java.lang.RuntimePermission accessClassInPackage.org.apache.tomcat.dbcp.collections)
            at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
            at java.security.AccessController.checkPermission(AccessController.java:427)
            at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
            at java.lang.SecurityManager.checkPackageAccess(SecurityManager.java:1512)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)The servlet
    * DataSourceAccess.java
    * Created on August 22, 2005, 3:14 PM
    package officecom;
    import java.io.*;
    import java.net.*;
    import java.sql.*;
    import javax.naming.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import javax.sql.*;
    * @author Paramasivam
    * @version
    public class DataSourceAccess extends HttpServlet {
        /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
         * @param request servlet request
         * @param response servlet response
        protected void processRequest(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            response.setContentType("text/html;charset=UTF-8");
            PrintWriter out = response.getWriter();
            /* TODO output your page here
            out.println("<html>");
            out.println("<head>");
            out.println("<title>Servlet DataSourceAccess</title>");
            out.println("</head>");
            out.println("<body>");
            out.println("<h1>Servlet DataSourceAccess at " + request.getContextPath () + "</h1>");
            out.println("</body>");
            out.println("</html>");
            out.println(" got connection ?  "+getDataConnnecion());
            out.close();
        public boolean getDataConnnecion(){
            try{
                System.out.println(" INFO : getConnection called     ");
                Context initContext = new InitialContext();
                Context envContext  = (Context)initContext.lookup("java:/comp/env");
                DataSource ds = (DataSource)envContext.lookup("mysql");
                Connection con = ds.getConnection();
                if( con != null ){
                    return true;
                }else
                    return false;
            }catch(Exception e){
                e.printStackTrace();
                return false;
        // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
        /** Handles the HTTP <code>GET</code> method.
         * @param request servlet request
         * @param response servlet response
        protected void doGet(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            processRequest(request, response);
        /** Handles the HTTP <code>POST</code> method.
         * @param request servlet request
         * @param response servlet response
        protected void doPost(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            processRequest(request, response);
        /** Returns a short description of the servlet.
        public String getServletInfo() {
            return "Short description";
        // </editor-fold>
    }Changes in server.xml
    <GlobalNamingResources>
          <Resource
          name="mysql"
          auth="Container"
          type="javax.sql.DataSource"
          password=""
          driverClassName="com.mysql.jdbc.Driver"
          maxIdle="2"
          maxWait="5000"
          username="root"
          url="jdbc:mysql://localhost:3306/sushi?autoReconnect=true"
          maxActive="4"/>
      </GlobalNamingResources>changes in web.xml
      <resource-ref>
               <description>Tomcat DBCP</description>
               <res-ref-name>mysql</res-ref-name>
               <res-type>javax.sql.DataSource</res-type>
               <res-auth>Container</res-auth>
    </resource-ref> 

    You might have more answers if you post this same question in the Sun Java Studio Enterprise forum...
    http://swforum.sun.com/jive/category.jspa?categoryID=90

  • Unable to connect to the datasource in Endeca Studio

    Hi,
    I created a data domain using Endeca Integrator and created the corresponding data source in Endeca Studio. When I'm try to validate the data source configuration in studio it displays the following information "Data source definition format is valid but unable to connect.". But when I leave the studio on for some time and test the connection once again, it works.
    Any insight regarding this problem would be appreciated.
    Thanks,
    Shashank

    I believe you are using a machine with not a lot of RAM, that's correct?
    Maybe sometimes you need to know how many RAM you have available when you create a new One Source
    And also you need to know which Data Sources are enable...
    IN A CMD
    Cd C:\Oracle\Middleware\EndecaServer7.5.1_1\endeca-cmd
    endeca-cmd list-dd-profiles
    For more information check this...
    http://docs.oracle.com/cd/E37502_01/server.751/AdminGuide.pdf
    Let me know if this help you...
    EBrauerP

  • Unable to activate web service datasource

    Hi ,
    After adding a new field to web service datasource, it does not allow me to activate it saying
    "Invalid Datastore Object Name <psa table>
    "No valid entry in RSTS".
    Any ideas.
    Thx.

    I'm seeing this problem too after several attempts at the "Quick Start Tutorial" http://www.netbeans.org/kb/41/tutorial-webservice.html
    Mac OS 10.4.3
    NetBeans 4.1 (with bundled application server)
    Java 1.4.2_09

  • Unable to find activated 2LIS_02_ITM  datasource in BW system.

    Hi,
          I am trying to extract data  for  2LIS_02_ITM extractor. I have activated data source in R3 and can see the records in RSA3.  When I try to assign data source in BW system it does not show me 2LIS_02_ITM in corresponding logistic system (R3 system).
    Please let me know what is the problem? How can I see activated datasource 2LIS_02_ITM while assigning data source?
    Points for sure
    Thank You,
    -Neha

    Meha
    to make sure you have done the replication for the right system source go to transaction rsds in your BW system in order to make the replication in a single manner type in the name of datasource 2LIS_02_ITM select the R3 or ECC Source system from where you have activate it, the source system should be listed in the match code then with the menu in the top select replicate datasource sure it will work.
    And other thing if you work on bi 7 a confusion araise is that when you go to datasources in the modeling window in the workbench you have to select in the top for which system you want to see the datasources and by default it is the BW so select the appropriate hope this could help you Sir.
    regards
    Boujema

  • Unable to connect FR studio Datasource

    Hi all,
    I am facing an issue, when i logon to FR studio and wants to prepare new report -> clicking on 'Insert grid' -> it promts some error. *"DatasourceIDLogin.LoadDatasourceNames Error: -2147467259 Error Loading DatasourceList to Repository"*. after that i have to kill the application to quit. So pls help me in this issue.
    Thanks in advance.

    Hi Manohar,
    I did as u siad. When again i connected to FR studio and "insert Grid" -> Same Datasource Error occurs. In 'FRClient.log' file like this
    01-05 19:11:02 ERROR HrGlobalMethods     uncompressBytes()
    01-05 19:11:02 ERROR HrGlobalMethods     Exception occured: null
    01-05 19:11:02 ERROR HrGlobalMethods     java.lang.NullPointerException
         at java.io.ByteArrayInputStream.<init>(Unknown Source)
         at com.hyperion.reporting.util.HrGlobalMethods.uncompressBytes(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.load(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)
         at com.hyperion.reporting.javacom.HrDatasourceManagerComImpl.getAllDatasources(Unknown Source)
    01-05 19:11:02 ERROR HrDatasourceManagerImpl     Exception occured: null
    01-05 19:11:02 ERROR HrDatasourceManagerImpl     java.lang.NullPointerException
         at java.io.ByteArrayInputStream.<init>(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.load(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)
         at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)
         at com.hyperion.reporting.javacom.HrDatasourceManagerComImpl.getAllDatasources(Unknown Source)
    I think it may help you to find the deffect.
    thanks in advance.

  • Unable to execute infopackage.

    Hi All,
    In development system when i tried to execute Infopackage it asking for transport request as if am changing some design.
    What might be the reason for this?
    Thanks & Regards,
    Virinchi.

    Hi,
    just drag and drop in the transport collection pannel in Transport collection there you can see under which request the infopackage is.and also try to release the particualr request don transport it just release it and then you can able to trigger again or you can do some changes to the infopackage aswell.but while releasing the request please change the description as don transport and do that.
    hope it will helps.
    plz assign points if it helps..
    Thanks,
    Ashok

  • No Infopackage available in Load process (In Process Chain)

    Hello All,
    We have a problem in process Chain,
    When we add the load Process Item and want to see all the infopackage available, the system say no data... We have Infopackage on Datasource vs 3.x and Datasource BI7.
    Thanks in advance for your help.

    Hi Bruno,
    if i am right u r getting message" no data selected" when u try 2 find IP. which SP u wrking on. try to look 4 ur IP in infosources tab next to data targets in process chain maintainence. It looks like some bug. check note 1062704
    Thanks
    Prashant

  • Cannot View CL Datasources

    Dear Gurus,
    I have created some CL Datasources in R3 and they are sitting pretty in RSA6(So its Active) under the LO-IO Application comp node.Now i replicate them datasource in BI 7(Using RSA1OLD transaction) - chose (RSDS Option rather than 3.x datasource Option).But am unable to view them CL Datasources neither in RSA1 nor in RSA1OLD,under that LO-IO node.Even checked them under other nodes,but nope....Can anyone help me out in this situation.
    manythanks
    arun

    Hi Gunjan,
                   Since i didnt get the " Replicate Datasources"option in RSA1(BI 7) but just the"Replicate Metadata"option,I tried in RSA1OLD and Replicated the Datasources.But now,yeah am able to view them DS in RSA1 (BI7) aswell.But am I doin the rite way here??
    manythanks
    arun

Maybe you are looking for