Unable to define Rule completely in ACTIVITY, asking for TASK definitation

Hi ,
I am facing the below problem, request your help.
I have an workflow , I have to created new activity and added rule under that, When i check for syntax errors, its says that TASK not defined, When Add TASK for the same activity where rule exists, Once the TASK is added, the rule is getting Deletd.
Kindly suggest. How to add Rule to Activity without errors without task, or is there any step to add rule alone.
Awaiting for your response.
With Regards,
Poornima

Hi,
What BO method are you using? Is a standard method?
There are only 2 reasons for a agent doesn't appear on your activity:
1) If there is a (sub)workflow defined in the task
or
2) There is a background task.
Try deleting the activity, use SWU_OBUF tcode and creating a new activity.
Regards,

Similar Messages

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

HT4061 unable to unlock phone as it is asking for a password i do not have

unable to unlock phone as it is asking for a password i do not have?

Hi Danny,
You will need to follow the instructions in the support article link below that best apply to your situation:
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

TS1398 Changed pw in my home network. Now when try to connect, I get message "unable to connect"' but It doesn't ask for new password. So ii'm dead in the water. How do I connect.?

Changed PW in my home network. Now when I try to log on I get "unable to connect" , but it doesn't ask for he new (or any) password, so I'm dead in the water. Any suggestions?

Use the Settings app to select your Wi-Fi network.
Settings > Wi-Fi > Select the Wi-Fi Network that will not work > then select Forget this Network
After to accept this choice your iPad should see your network again and allow you to enter the new password.

Unable to download itunes apps, it is asking for credit card number, how to download apps without credit card number, plz help me

Hi guys,
i am unable to download itunes apps, it is asking for credit card number, can anyonw tell me how to download apps without credit card number?
with regards
anil

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The only way to get free apps without a bank card is to create a new Apple ID following Apple's steps very carefully;
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
http://support.apple.com/kb/HT2534

I am unable to sign into icloud. When asked for my date of birth I receive a message that my dob does match Apple's records. I don't remember setting a different password for icloud.

Since I replaced my iPhone 4 with the 5s I have been unable to access icloud. When asked for my password I receive the message that it is not valid. wehn using the security questions the system does recognize my date of birth.

You can have the password reset sent to the email address associated with your ID, as explained in the second option here: http://support.apple.com/kb/HT5787. If you don't have access to the email address, you'll have to contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

TS3274 I'm unable to update my apps. It asks for my iTunes password and the thinks for a second and the goes back to original update notification.

Unable to update apps. Use iTunes password and program thinks for a couple of seconds and the goes back to original position.

What's the original position?
Does the screen asking for your password have a different Apple ID that the one you currently use? If so the app must have been downloaded with that different Apple ID. You will have to enter the password for that original Apple ID because downloaded or purchased apps are always associated with the ID used to download o urchase them.

HT201209 Itunes account shows 75.00 unable to use in Mac App store asked for code i no longer have

New macBook pro I uploaded Itunes gift card by reading directly into mac. Now see a valid balance so I trashed the gift cards. When trying to redeem in the Mac App store it asks for a code. Any thoughts?
Ryan

Welcome to the Apple Community.
You can't use iTunes Store gift cards in the Mac App Store.

BCS Authoirzation activity types for tasks

Hi All,
The following activity types exist for tasks, the wildcard (*) and the next 5 are self explanatory to me
but how about A3 "change status"?
how can it be used in any way that the others couldn't acheive? it appears redundant to me.
Activity     Description          My assumption
03     Display          Display last results
05     Lock          Lock task
16     Execute          execute task in update mode
48     Simulate          execute task in test mode
95     Unlock          Unlock task
A3     Change status     change status of task, eg from locked to unlocked, red to yellow or green
So, what would happen if a user had 03. 05, 16, 48 & 95 but not * or A3? and then tried to run a task?

Hi,
The following activity types exist for tasks, the wildcard (*) and the next 5 are self explanatory to me
but how about A3 "change status"?
how can it be used in any way that the others couldn't acheive? it appears redundant to me.
- I do not think that this is redundant. There is a new functionality that may prohibit a user from changing the statuses of the tasks. Looks like this activity will allow it.
So, what would happen if a user had 03. 05, 16, 48 & 95 but not * or A3? and then tried to run a task?
- Let me quess: everything will be as usual: tasks lock/unlock, execution. The user just will not be ably to change the tasks status manually. If the status changed the usual task run - no problem.
But again, these are my quesses. You might be the first who may give an answer after experiments. And if it is please share the results with us.

Unable to open a document keeps on asking for adobe flashplayer

I'm logged on to a site where I need to open documents and its asking to download a flashplayer.

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

HT201209 I am unable to redeem anything on my Itunes, asks for my password, I imput it and still will not allow me to redeem anything

I am trying to redeem a free book from I picked up from Starbucks, and when I clicked the Redeem link and imputed my password, it did not toggle over to the Redeem site, instead it kept asking me for my password. I did it about four times until, I came to this site to see what is going on. It has been awile since I have used Itunes, but I have never had problems before redeeming songs or Itune gift cards.
I wonder what is going on.
Any information will be helpful. Thanks.

Hi AnnaDiCe,
If you are repeatedly prompted to enter your password when trying to use the iTunes Store, you may want to make sure that you have the most recent update to iTunes:
Apple Support: iTunes 11.0.4
http://support.apple.com/kb/DL1614
This update fixes a problem that may cause iTunes to quit if you switch between wired and wireless syncing and addresses an issue that may require you to log into the iTunes Store repeatedly.
Cheers,
- Brenden

Where is birthday ios 5 activation asked for stored?

Part of the activation process of upgrading my 3gs to iOS 5 involved entering a birthday. Where is that birthday stored?

Tom Gewecke wrote:
fbi1980e wrote:
APPLE needs to get this information correct.
Or maybe someone needs to find a cure for AIUAD (Apple iOS Upgrade Anxiety Disorder).
Oh yeah deffo got that, been looking forward to this for months, my wife thinks i am acting like a kid at christmas

Is it too much to ask for Apple to explain the content of the Console?

I've asked for definitions of terms for years now ... defintions of console terms and phrases such as the following example, each of which may well relate, in terms of the components and the Consoles ref to their "loading", to the ongoing, sophistcated penentration that manages to deinstall my ESET firewall and screw up desktop components across the board. None of third-party malware products have ever found a "threat" on my system, but the malicious activity continues. '
Unfortunately Apple long ago decided against helping their customers with the UNIX-based Mac, pretending to the world that new OS X Macs were as simple use as System 9 Macs, and just as secure. LOL. What a lie.
Apple exploits its reputation for not documenting its products by continuing to not document their products. Apple also continues to imply in all sorts of ways that a Mac is the most secure platform on the planet, ignoring the fact that its Firewall is a joke because, among other things, its "safest" setting — Block All Incoming Traffic — lets Bonjour traffic in, as if it or its Windows twin ZeroConfig are safe when in truth Bonjour is a massive back door that is almost impossible to shut off.
WHY DOESN'T APPLE DEFINE ITS CONSOLE MESSAGES, ESPECIALLY THOSE REPORTING ON COMPONENTS THAT ARE SUPPOSED TO BE DISABLED, SUCH AS ACTIVE DIRECTORY, WHICH HACKERS LIKE TO USE TO SET UP SHAM DHCP SERVERS?
WHAT DOES THIS MESSAGE MEAN? Plugin "Active Directory", Version "6.5.1", is set to load lazily.
Since I have the bad luck of being targeted, and since I know Active Directory represents a huge security hole unless it is used in a controlled environment (i.e., and office the infrastracture of which is used by IT staff to secure its at-work network), I know I don't want mdsresponder guiding a sham server through a firewall's "maximum security" setting.
SO, I SHOUT THIS QUESTION INTO APPLE'S ECHOING VOID: IS IT TOO MUCH TO ASK FOR A DEFINITION FOR: Is set to load lazily"?
Is there anyone with integrity left at Apple, or did they all leave when Bonjour was introduced?

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

E90 still asking for unlock code after hard reset

I forgot the unlock code for nokia e90 i bought used. it was bought from ireland. so i was searching the forums and i found the *+3+call button+switch on technique to hard reset. the hard reset is complete but fone asks for code and now i am totally struck. please help.

The full reset only resets the unlock code for a few models. Obviously the E90 is not one of them. This means it can only be reset by a Nokia Care Point. You will need to bring proof of purchase/ownership with you.

CS6 Beta asks for disk during install

I downloaded the CS6 beta to a new folder in my Program Files folder on my hard drive.
I did a complete shut-down and cold restart on the PC.
I closed all other programs and disabled all the memory-resident ones except my antivirus.
I started the CS6 setup. At roughly 28% complete, the installer stopped and displayed the message:
"Please insert disk Photoshop CS6 to continue"
Clicking 'Continue' brought the same error message screen back.
I would like to try CS6, but how do I get it installed?

My OS is 32-bit XP Pro SP3 with all critical updates applied. The only other Adobe product installed is Adobe Reader X.
The only thing you did differently is to put the downloaded file and the extracted files on your Desktop. I downloaded mine to a unique folder in my hard drive Program Files folder, extracted them there, then ran the Installer.
I also selected 'Try' instead of 'Buy' and created a unique Adobe login ID for myself. After the first failed attempt, all subsequent installation attempts 'recognized' my Adobe ID and only asked me to confirm it.
Since my last post, I've also tried copying the extracted files to a DVD, then running the Installer from the hard drive with the DVD in the DVD drive (Failed) and I tried running the Installer directly from the DVD drive (Failed). In each attempt, it got to 28% complete, then began asking for the Photoshop 6 disk.
I may try to install CS6 Beta on my Win7 system, but I really dislike using that PC for beta versions of programs.

Unable to define Rule completely in ACTIVITY, asking for TASK definitation

Similar Messages

Maybe you are looking for