Unable to delete a printfile using Bonjour - "Error Processing Command"

I recently installed Bonjour on a DELL Dimension E310 machine running Windows XP. It is connected to a small network of office computers. One of them is an Apple. The Apple computer has an HP color printer attached to it via a USB cord and it is shared on the network.
After installing Bonjour on the Windows XP machine, I tried to print a test page on the shared HP color printer, but it did not print.
When I looked at the pending documents on the shared HP color printer, turns out there is a print file that is stuck. It will not print and I can not delete it either. Comes back with an error "unable to process command" or "Error processing command".
After more investigation I've discovered the actual print file name is: "smbprn.00000011" and it was sent to the printer back in November of 2009.
How can I delete this print file???
I've uninstalled Bonjour and re-installed it to see if this would delete the print file, but it did not work.
I've done a hard reset on the HP color printer and rebooted the Apple computer it's connected to. The Apple computer can print to the HP color printer just fine, but the Windows XP machine can not.
I've also searched the entire disk drive on the Apple computer AND the Windows XP machine for the "smbprn.00000011" file, but it was not found. I even searched all the system and hidden file folders too with no luck.
How can I locate and delete this print file that is stuck ???
All suggestions are welcome and appreciated.
Thank You,

Check the table name in your MRD process and make sure it's the right one. Also ensure the "checked" value of the checkbox is correct (i.e.: is the checkbox based on the correct key column from the report?).

Similar Messages

  • Lion successfully installed. now unable to get on vpn using cisco, error 51 constantly appears. should have stayed on snow leopard!

    ion successfully installed. now unable to get on vpn using cisco, error 51 constantly appears. should have stayed on snow leopard!

    Try opening a terminal window (Applications >> Utilities). At the prompt, enter:
    >sudo SystemStarter restart CiscoVPN
    This will ask you for the admin password and it will restart the Cisco client service. That should fix it. This seems to be a known issue that will eventually be solved with some updates.
    DB

  • Unable to update iTunes:  Related to Bonjour error "WSARecvMsg error 87"

    I am running iTunes 9.2.0.61 on Windows 7 Ultimate x64. For some time, I have been unable to update iTunes to the latest version beyond what I have, regardless of what the latest version is.
    Using Apple Software Update, I get the following error during the update:
    "Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
    Accompanying this error in the Application log in Event Viewer are a few errors:
    Event ID: Source: Occurrences:
    100 Bonjour Service 7
    11920 MsiInstaller 1
    Event ID 100 from Bonjour Service has the following message:
    Log Name: Application
    Source: Bonjour Service
    Date: 10/31/2010 8:51:05 AM
    Event ID: 100
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: WILL7
    Description:
    The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    WSARecvMsg failed (87)
    The specified resource type cannot be found in the image file
    Log Name: Application
    Source: Bonjour Service
    Date: 10/31/2010 8:51:05 AM
    Event ID: 100
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: WILL7
    Description:
    The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    WSARecvMsg failed (87)
    The specified resource type cannot be found in the image file
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Bonjour Service" />
    <EventID Qualifiers="0">100</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-10-31T12:51:05.000000000Z" />
    <EventRecordID>16990</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WILL7</Computer>
    <Security />
    </System>
    <EventData>
    <Data>WSARecvMsg failed (87)
    </Data>
    </EventData>
    </Event>
    Here is the error for event 11920 from MsiInstaller:
    Log Name: Application
    Source: MsiInstaller
    Date: 10/31/2010 8:51:06 AM
    Event ID: 11920
    Task Category: None
    Level: Error
    Keywords: Classic
    User: WILL7\swsander
    Computer: WILL7
    Description:
    Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">11920</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-10-31T12:51:06.000000000Z" />
    <EventRecordID>16991</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WILL7</Computer>
    <Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
    </System>
    <EventData>
    <Data>Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
    <Binary>7B34314246304445342D354241452D344238382D414644332D383641333042323232313 8367D</Binary>
    </EventData>
    </Event>
    I checked my Services console and Bonjour was started. I can also stop and start it without issue. I searched for these errors, but most of what I found was trouble getting the Bonjour service to start and as you can see, this is not my issue.
    I have also tried to update iTunes with Bonjour stopped and disabled and with my Eset NOD32 Antivirus software disabled, but neither of these steps made any difference. I do not have a third-party firewall on my PC, but I am using Windows firewall. I have also tried disabling the Windows firewall, but this made no difference.
    Any help would be appreciated.

    More information:
    Found this in the System log in Windows Event Viewer. There are many occurrences coinciding with the times I have been trying to update iTunes and/or Bonjour.
    Log Name: System
    Source: Service Control Manager
    Date: 10/31/2010 9:44:14 AM
    Event ID: 7024
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: WILL7
    Description:
    The Bonjour Service service terminated with service-specific error The parameter is incorrect..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2010-10-31T13:44:14.338716200Z" />
    <EventRecordID>94955</EventRecordID>
    <Correlation />
    <Execution ProcessID="876" ThreadID="4212" />
    <Channel>System</Channel>
    <Computer>WILL7</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">Bonjour Service</Data>
    <Data Name="param2">%%87</Data>
    </EventData>
    </Event>
    Message was edited by: scottws

  • Unable to delete a journal using Group ID

    Hello guys,
    I have an imported journal that needs to be deleted. I used the delete journal window, issued the group id, the source and the request id and submitted the delete program but the journal could not be deleted. Though, the progrm completed normal.
    Any idea will help.

    In which table is the data still appearing?
    Headers?
    If so query the Journal from front end and delete it.

  • Unable to capture C drive using Dism and imageX commands

    I am trying to capture C drive using dism command but it did not work, but the same command is capturing E drive. i am using following command.
    dism /Capture-Image /ImageFile:E:\image.wim /CaptureDir:C:\  /name:"Image File"
    I am getting following error.
    Deployment Image Servicing and Management tool
    Version: 6.3.9431.0
    Error: 32
    The process cannot access the file because it is being used by another process.
    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    An in the log file the error is:   DISM   DISM.EXE: WimManager processed the command line but failed. HRESULT=80070020

    Hi,
    As far as I know, Dism command doesn't support hot image backup, that to say, you do need to complete the image backup job at Windows PE enviroment.
    The contents of the link below also list the Dism command capture image requirement：
    http://technet.microsoft.com/en-us/library/hh825072.aspx
    Roger Lu
    TechNet Community Support

  • Yahoo Mail - Unable to delete and Cannot Get Mail errors

    A few days ago my Yahoo mail started acting up.
    I keep on getting "Unable to move message" errors when trying to delete mail. The proper folder is selected as the trash folder under settings. Sometimes message do delete however, but mostly they do not.
    I am also getting periodic Cannot Get Mail errors, but mostly I am able to receive mail.
    This leads me to believe that this might be a yahoo issue (I opened a support request with them also) I have deleted the account from my iPhone and recreated it several times, but the problem persist.
    Anybody else having similar issues with Yahoo mail ?
    Thanks
    PS I have Yahoo Mail Plus with POP access

    I opened a ticket with Yahoo, a day later they came back and advised that they made some changes to my account, but it still does not work.
    There is something strange about how Apple and Yahoo communicates, I think there is some exchange in the middle that is causing the problems. The reason for me saying this is the error I got periodically stating that "Cannot Get Mail, The user name or password for imap.apple.mail.yahoo.com is incorrect". Why imap.APPLE.mail.yahoo.com ???
    I did however setup a "Other" mail type account using the POP and SMTP settings from Yahoo and it works like a charm now, no more problems and I can now even use a different reply to e-mail address. Only issue might be that you no longer have the Yahoo side custom mail folders on the iPhone, but this is no big deal for me.
    For the incoming server I used pop.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com)
    For outgoing, SMTP, Hostname I used smtp.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com), SSL = ON, authentication = Password and server port 465
    Under advanced settings for outgoing mail server, Use SSL = ON , authentication = Password and server port 995.
    I am not claiming that I understand all of the above, but it works. Hopefully this may point you in the right direction.

  • Unable to delete a row using checkbox on report region

    hmm..this used to work, and unfortunatly this is code unfamiliar to me. We have a report region containing a list of records. The last column is a row selector, and is a check box. Several rows may be checked and then a delete button pressed.
    we receive the following error: ORA-20001: Error in multi row delete operation: row= 394878, ORA-01403: no data found,
    multi row operation failed
    however, the key that it references 394878 is not that of the record I had checked, rather it is the first record in the report.
    so...not able to delete, and it is trying to delete the wrong record. Any ideas. thanks

    Check the table name in your MRD process and make sure it's the right one. Also ensure the "checked" value of the checkbox is correct (i.e.: is the checkbox based on the correct key column from the report?).

  • Unable to delete a custom report in Fabric Manager

    Hi there,
    If I create a Custom Report in Fabric Manager (3.2(3a)) I'm unable to Delete it aftwards :-(
    Get an "Error on Page.":
    Line: 388
    Char: 1
    Error: 'Delete560nClick' is undefined
    Code: 0
    URL: http:/xxxxxxx/s614.do
    Any ideas ? IE version I'm running is : 6.0.3790.3959
    Thanks!
    Mark

    I haven't heard of this issue before. Have you tried running FM on another host or upgrading FM to see if it goes away?
    Thank you.

  • Unable to delete the interchangeability groups

    Hi all,
    Unable to delete the interchageabilty groups.
    Error: Package does not exists
    Can you please guide me to delete the IC groups.
    Regards
    KPN Murthy

    Hi,
    Some information regarding "package does not exsit".
    This type of error usually occurs if the planning package is created manually and assigned to the product at //mat1.So,delete the package in in PPDS Tab,and recheck the issue. For the affected product(s) I think you had manually created the package without a Heuristic assignment to it,which is not allowed.
    Check SAP help:[http://help.sap.com/saphelp_scm2007/helpdata/en/c1/147a375f0dbc7fe100000 09b38f8cf/frameset.htm]
    Best Regards,
    Ada

  • Error processing regular expression:

    This is a strange one - I have 4 different arch installs and on one I get the following error using gyachi;
    Error processing regular expression: '[ء-ي]' -- Invalid collation character
    On all other installs it works fine - its just the one.  All other regex methods are accepted except foreign character tests.  I have tried about everything I can think of.  (it doesn't matter if I build it from scratch or use the package, the locale settings are the same, locale-gen completed without error locale returns the same info I have updated and refreshed the entire package database).

    Raised this with support. I needed to alter the regular expression to be:
    ([~_]text_io)|([~_]ole2)|([~_]tool_env)|([~_]host)
    This expression [~client_]text_io check that none of the individual characters c, l, i, e, n, t, _ exist before text_io rather then the string "client_"

  • Bonjour, j'ai les logiciels du produits en rubrique. J'ai aussi les codes d'activation. Après le nettoyage de l'ordinateur , les programmes ont disparus. En les reinstallant, le système montrer:  ERROR: DF037: Unable to delete directory "/Applications/Ado

    Bonjour,
    j'ai les logiciels du produits en rubrique. J'ai aussi les codes d'activation. Après le nettoyage de l'ordinateur , les programmes ont disparus. En les reinstallant, le système montrer:
    ERROR: DF037: Unable to delete directory "/Applications/Adobe"(Seq 2161)ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2161)
    Pouvez vous m'aider avec la récupération des mes logiciels pour continuer mon travail?
    Sincèrement,
    Gala Sibiliova ([email protected])

    Well, by default SQL*Loader new line as end of record. Since your logical record in question consists of multiple lines each line is treated as a seaparate record. As a result, SQL*Loader finds a record with starting double quote without matching ending double quote. You must to use stream record format option in SQL*Loader by using
    INFILE whatever-your-infile-is "str X'xxxx'"where xxxx are charactercombination SQL*Loader should use as record separator in hexidecimal format.
    SY.

  • Unable to download itunes 10.5 cannot delete older version of bonjour

    I am unable to download the latest version of I tunes. An error message comes up that says it is unable to delete and older version of bonjour

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

  • I Receive Error DF015 Unable to delete symlink "/Library/Application Support/Adobe/APE/3.4/adbeapeco

    Hi,
    I am having issues installing Extension Managger CC.  I receive the follwoing error when attempting to install Extension Manager:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR: DF015 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: Adobe Player for Embedding 3.4 3.4.0.0 {6E6ECFC9-FE3D-4314-B937-7E25A7862899} -----------
    ERROR: DF015: Unable to delete symlink "/Library/Application Support/Adobe/APE/3.4/adbeapecore.framework/Libraries"(Seq 4)
    I don't know if the permissions on the file (and contents) are correct.  I noticed that they were pointing to a user that no longer exists.  I manually went in and made the owner and groups point to system, wheel and root and everyone, with all three having R+W access.
    Are these the correct permissions?  I was thinking of using Adobe CC Cleaner but I didn't see anything that mentioned Extension Manager.  What would the APE 3.4 be called?
    What yould you recommend?
    Thanks,
    Rocky

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rocky you are correct to determine this is a file permission failure which is causing the error.  Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust the file permissions.
    If you continue to fail with this update you may want to try applying the update in either a Root user account or a new administrator account to see if the same failure occurs.

  • Unable to delete WEB-INF\\lib\*.jar using ant

    Using ant to build struts.
    This is part of the build.xml for struts-example.war
    <property name="deploy.dir" value="${tomcat.home}/webapps"/>
    <target name="cleanWebApp">
    <delete file="${deploy.dir}/${war.file.name}" />
    <delete dir="${deploy.dir}/${war.file}" includeEmptyDirs="true" />
    </target>
    But when I try to build and reload it to tomcat, it gives me errors:
    cleanWebApp:
    [delete] Deleting: D:\jakarta-tomcat-5.5.7\webapps\struts-example.war
    [delete] Deleting directory D:\jakarta-tomcat-5.5.7\webapps\struts-example
    BUILD FAILED
    D:Java\code\struts\strutsexamples\build.xml:46: Unable to delete file D:\jakarta-tomcat-5.5.7\webapps\struts-example\WEB-INF\lib\commons-digester.jar
    Also lib\struts.jar(maybe more) can't be deleted.
    Now I have to stop tomcat, delete it manually, and reinstall the war.
    How can I fix this problem?

    All the advice above seems to make sense, but .....
    - Tomcat shutdown,
    - with all java processes shutdown,
    - after a full reboot,
    - with antiJARLocking="true" set in every context.xml I can find:
    [delete] Deleting directory C:\Program Files\Apache Software
    Foundation\Tomcat 5.5\webapps\myApp
    BUILD FAILED
    C:\myApp\build.xml:118: Unable to delete file C:\Program Files\Apache
    Software Foundation\Tomcat 5.5\webapps\myApp\WEB-INF\lib\antlr.jar
    But I CAN delete the jars using the normal Windows Explorer or from the DOS Command Prompt.
    And per the advice found here:
    http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=67&t=000574
    I've downloaded the Process Explorer from www.sysinternals.com and no windows processes appear to have a handle on there directory.
    I think the solution is indeed to exclude jar files from <delete> target.
    Regards,
    Stewart

  • VDBench : "Unable to delete directory" Error isnt clear.

    Hey,
    is it possible to add some detailing to the error ?
    e.g If there ares till files left , then list them in the log.
    And also add the errno if possible
    04:52:02.159 Unable to delete directory: /mnt/machine/test-114/vdbench001/vdb1_1.dir/vdb2_2.dir/vdb3_2.dir/vdb4_1.dir/vdb5_1.dir/vdb6_2.dir/vdb7_2.dir/vdb8_2.dir
    04:52:02.159 04:52:02.159 Are there any files left that were not created by Vdbench?
    Thank you !

    Yes, I could list the files that are left, if any, but the 'ls' command should do that nicely for you.
    As far as 'errno', since the directory delete is done using java code, 'errno' is not available.
    You may have to use tools like 'predictive tracing' available on Solaris Dtrace to find out why/where/what about the failed delete.

Maybe you are looking for