Unable to delete/create integration models.
Hi All,
I need to correct some int.models wrt the logical system.
1) CFM1 u2013 choose variant pops up a msg- logical system not maintained in NDV2. This is not supposed to be maintained. I need to change the variant models for a different logical system that is maintained in NDV2.
2) CFM7- delete all models.- I am unable to delete the models even after making them inactive.
Final objective is to delete all the models- active and inactive and recreate new ones as nomenclature needs to be same. I canu2019t maintain the wrong (present) logical system in img, that's seen in the IM variants that do not lend themselves to change. The moment i do CFM1 it pops up a an error screen referring a wrong logical system..
Pls., guide step by step.
Regards,
Lok
Thanks Lakshmi,
I began on the same note as wass evident but i did not have the wb request auth required. so was thinking if there is another was out fiddling with user transactions of IMs
Thanks for prompt reply. Awarded full 10 points.
Regards.
Lok
Similar Messages
-
Deleting an Integration Model.
hi Guys
if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data.
thank u
karan
Edited by: karan.sap on Feb 27, 2010 6:36 PMHi Karan,
1) if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
As and when you activate an integration model, a new integration model gets
generated and the earlier one will get deactivated. (provided the model name,
model selection criteria are same). That means the newly changed master data
will get activated to SCM system in which the old change is obsolete.
2) And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data
Whenever a new model gets generated, the old model will be there in the system
only and that inactive models needs to be deleted at frequent intervals orelse
it will add inconsistency to the system. This will be done using CFM7 transaction
by selecting inactive models indicator. Whether the old model is deleted or not, but
system always will read and plan as per the newly activated model.
Regards
R. Senthil Mareeswaran. -
I have created an integration model using CFM1 & activated in CFM2.
now dont know how to proceed.
is there any document or link to transfer data from R/3 to APO system.
i m new to this field & trying by own.
Thanks in advance.Best way of creating CIF integration Model
Hai,
Please go through the above thread which can help you for understanding more about the integration models creation.
You have mentioned that you have done CFM1 and CFM2. Can you please inform for which object you have done and what you would like to see in APO?
Giving more details would enable helping you better.
Regards,
Murali.J -
Unable to Delete PI Integration Directory Objects
Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards -
Transfer of material from R/3 to APO, Problem in Integration model
Hi
I have created Integration model for Transferring material from R/3 to APO.
While activating the model, it is giving error with status as i..e. SYSFAIL
On clicking the status, I am getting the following message
"Logical system R3CON does not assigned to Business System Group"
?Where to locate the BSG in R/3 and assign before transferring matl to APO
i require the steps&help to solve the problem.
Thanks in advance to all members for the help.
SrikanthDear Srikant ,
Pls check you have followed the below steps in the same sequence for R3 and APO
<u>CIF Settings in R/3</u>
Check ALE settings or activate ALE settings
Define the logical system <b>BD54</b>
Assign logical system to a client <b>SCC4</b>
Set the RFC destination <b>SM59</b>
<i>Assign target system and queue type <b>CFC1</b></i>
Maintain the SAP APO release <b>NDV2</b>
Activate BTEs for SAP APO integration <b>BF11</b>
User parameters for CIF <b>CFC2</b>
<u>CIF Settings in APO</u>
Check ALE settings or activate ALE settings
Define the logical system <b>BD54</b>
Assign logical system to a client <b>SCC4</b>
Set the RFC destination <b>SM59</b>
Set up business system group
Create BSG <b>/SAPAPO/C1</b>
Assign logical systems to BSG <b>/SAPAPO/C2</b>
Maintain distribution definitions <b>/SAPAPO/CP1</b>
User parameters for CIF <b>/SAPAPO/C4</b>
You have got stuck up somewhere in R3 setting , which I have marked in italic font i.e.<i>Assign target system and queue type CFC1</i>
I hope this will solve your problem .
Thanks ,
Digambar -
Requirement Reduction integration model
Hi,
Can someone explain in layman terms with an example what happens when "requirment reduction" object is CIF'd alongwith Planned independent Requirements (to APO). Why should/would someone create an integration model for requirement reduction when integration models exist for PIRs and Sales Orders consumption settings are taking care of netting (as applicable/set). we have funtionalities for consumption and reduction of sales orders from PIR's e.g in APO and ECC.
Thanks
LokHello,
I would like to see a clear explanation to that as well.
From what I understand reading about this topic it is to have additional control over this by applying own logic in CIF.
Quoting the SAP documents:
<<If you set this indicator, you can create integration models specifically for
the Requirements Reduction filter object type (type T_FCC).
The filtering takes place on the basis of active integration models for
requirements reduction. In this case, you can control in greater detail for
which material-plant combinations a requirements reduction should be transferred
to SAP APO.>>
For normal cases this is not needed. Perhaps it is needed if you want certain shipments to other plants to reduce forecast. E.g. mixed MRP.
Regards,
Tor -
BOM and PDS in integration model
Hi, All!!
Could you help me colleagues?
I try to create integration model in ECC (transacion CFM1), but at choice PDS or BOM the system gives out the message: "Integration model contains object types not valid for this APO release"
How to transfer in APO this data?Thanks, I have understood
-
Hello All,
I want to tansfer data for plant,shipping point,customer and vendor from ERP to EWM.For this I have created Integration model.When I am trying to activate this I could not as I am getting message like'Queue for current initial data transfer is deregistered-Tgt System: APOCLNT800-Deregistered Queue' and hence Inbound queue blocked.
What could be the reason for this message. How to unblock this Inbound queqe?
Thanks,
ShaileshHi James,
Thanks. But this error is due to queue 'CFLD* System is not activating integration model and showing error like this'Operation terminated due to error (queue CFLD*, target system APOCLNT800)'
In SMQR I could not find this queue to acivate ,I tried in SMQ1/SMQ2, but I could not find this queue.
Do I need to create this queue? I yes I am unkown T.code for this. Do you have any idea?
Thanks,
Shailesh -
Transaction for activate the integration model
hi,
i created integration model using cfm1 transaction , how to activate the model ? in which transaction.
regards
muthuraman.dHi Mathuraman,
you can use the transaction CFM2 to activate your generated Integration Model. This transaction is used both for activation and deactivation of the Integration model.
For Initial transfers you can use the program RIMODINI also.
Let me know if it helps.
Regards
Gaurav -
Restrciting Deliveries in Integration model
Hi,
How can we restrict deliveries in integration model by dates? I see the option to select sales orders but not deliveries. Is it with any other name? How do I restrict it by dates?
Thanks.Hi Raj,
While creating Integration model if select sales order option by default it'll activate deleveries , Quotations and
Customer independent requirements,As far as I,m concerned there is no restriction for date selection,You can restrict only by location product....
Regards,
Prabhu -
Integration Models and CCR simultaneously . .
Dear All,
i have 2 questions :
1) Why cant we run two Integration model simultaneously ???
and
2) Why cant we run CCR jobs in parallel with planning run ???
Please let me know your observations and opnions.
Regards,
PrasadHi Prasad,
Below are the answers for your queries.
1) Why cant we run two Integration model simultaneously ???
Integration models are the building blocks of both master data and transactional data for APO. It has to be contructed in APO in a sequence or in a order so that the updation of data can be performed sequentially. Each data will look into the update of other data. For example, we need to run integration model for location first and then location-product. The first run of location will create integration model for location in APO and then when we run subsequently the location-product, the combination will be referred in APO. If we run both location and location-product together, if location-product tries to update the APO system first(tables) before location data, then it will throw out error and cancel the model run. Hence, it is advisable to run the models one by one in a sequence.
2) Why can't we run CCR jobs in parallel with planning run?
CCR runs will compare the transactional data between both R/3 and APO and display the results. Planning run will perform the planning based on the selection conditions and it takes data from both R/3 and APO. The planning results will be transferred from APO to R/3 based on our customisation settings. During the time, when transfer of results happening, if paralley, comparison of both system data happens via CCR job, it will not give correct data or end up with errors or tries to cancel the job.
Hope this clarifies your question.
Please confirm whether you are clarified?
Regards
R. Senthil Mareeswaran. -
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
AppleFAN7591 wrote:
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
Unable to create the model in designer
Very new to ODI, I have setup the master rep in Oracle 9i database. The working repository is also created there. But I am unable to create a model with Oracle techology as it doesnot give the Logical scema. May I request a solutions for the newbee.
Managed to solve the problem right now..
For new ones who would like to use Oracle 9i as master repository and working repository please check the following steps before continuing.
create the master repository on Oracle 9i database server
Make the agent server running
Launch the topology manager and create a new login for the master rep.
Login to TM.
create the working repository from topology manager. Physical Architecture -> Oracle -> right click -> create data server.
Now login to designer and create the model.
let me explore more and would revert back again.
check again at avisolutions.blogsopt.com -
I am anew user.
Initially I created several folders for my photos on the iPad itself but now know how to transfer photo folders using iTunes. However I am unable to delete/remove the now empty folders I created in iPad.
Can anyone assist me please
ThanksWhen you are in Album view in the Photos app - tap the edit button in the upper right corner - tap the X in the corner of the album to delete it.
-
Unable to delete Planning application created through EPMA
Hi friends,
Iam unable to delete the planning application created through EPMA.Tried logging in as admin still its not allowing.
I tried in application view-> right click and delete.it will ask for all related info and when I say 'delete', the status is aborted.
Can anyone tell whether we can delete an application created through EPMA. or is there a way to delete in backend.
Regards.Hi,
You could try and find more information from the logs, first change the level of logging for EPMA, it is set as standard to INFO and it is probably best changed to DEBUG.
To do this
Stop EPMA
Go to the deployed Web application directory.
For Tomcat, this is C:\Hyperion\deployments\Tomcat5\EPMAWebTier\webapps\awb\WEB-INF\conf.
Open AWBLog4j.properties.
Modify this line:
log4j.logger.com.hyperion.awb=ERROR,logfile, stdout to log4j.logger.com.hyperion.awb=DEBUG ,logfile, stdout
RESTART EPMA
Then try and delete again and check to see if the logs have further information.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Has this happen to anyone before? Will I be able to get my music, or money back?
-
How do i sign into my apple ID from the Apple homepage?
I need to sign into my apple account and try and backup my broken Iphone 5 before i go and hand it in to Best Buy . I have a passcode on my phone and my screen is broken, so i cant get into to it. The man at Best Buy said to try and back my phone up
-
Sorry if missed this post... I have a CSS layout with a repeating background for my faux columns. I have two Spry collapseable panels in the left column with alot of text. If you open up both panels at the same time, it is probably 2500px high. But,
-
How do i get rid of fuzzy green screen when videos are playing?
I get random fuzzy green screen appearing on macbook pro whenever I watch videos online. How do I get rid of it? I didn't have this problem before and I didn't do anything new to computer nor did I drop it.
-
Updating to IOS and stuck on Rescue Email? Says Optional email address to confirm your I.D. or reset password but with or without typing email address in, cannot get past screen. Click on enter or Next and nothing happens. Cannot even cancel updat