Unable to delete DSO request.
Hi Everyone,
We have Real time Data Acquisition (RDA) implemented in our system. Yesterday RDA failed due to invalid characters. We corrected data at PSA level and tried to run repair process chain, the request is not deleting with a
diagnosis message "Insertion of a data record into the active table failed. The data record already existed. This indicates manual changes to the database table".
Could somebody help in what way we can delete this request and load the corrected request. Any suggestion is highly appreciated.
Regards,
Shashidhar.
Hi Everyone,
Thanks a lot for your valuable suggestions.
Atlast the request was deleted successfully. I have following request related information to update to all of you.
Apart from the standard tables mentioned, viz., RSICCONT, RSMONICDP and RSODSACTREQ, . There is an other table RSBKREQUEST. This table contains the details of DTP requests.
Even after deleting from other tables mentioned before, we have to set the status field of the table RSBKREQUEST to "DELETED". Ours was in "INCORRECT" status, this was the reason because of which it was unable to run repair process chain, even after DTP request was removed from Infoprovider Administration.
So please note above table, which in very important for DTP requests and first 3 tables are enough only incase DTP is not involved and only infopackage is used to load to data target (3.x version).
Regards,
Shashidhar.
Similar Messages
-
Unable to delete bad request in ODS DATA TARGET
Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya -
Unable to Delete the request in ODS
HI Friends,
I am facing the problem with deleting request in ODS.
I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
it is showing the message request is already activated;no further QM action possible.
My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK -
Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran -
Master Data -- unable to delete the request
I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
I am trying to QM status Green Manually it is giving the message QM action not allowed for DTP requests in master data and Text Tables .
I am unable to delete the request also, when I am trying to delete it is saying
<b>Error:</b>
Data inconsistency; Partition /BIC/B0000959000 not deleted
Message no. RSAR026
<b>Diagnosis</b>
In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
<b>System Response</b>
The system outputs an error when deleting the partition.
<b>Procedure&</b>
Check the table for data consistency.
<b>Error:</b>
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 177'
Message no. RSSTATMAN102Hi,
I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
You can try the following OSS note for a start
SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
I've also found a very recent one:
SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
hope this helps...
Olivier.
Message was edited by:
Olivier Cora -
Unable to delete transport request
Hi Team,
The Standalone sandbox with ECC 6.0
Im deleting the transport request , getting error unable to delete the tranport request
Cannot open log:
hostname\sapmnt\trans\log\CC000036.SID.
Kinldy assist me in solving the issue .
Regards
KumarHi,
Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
Check if the file
hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
Regards,
Srikishan -
HI ALL,
i have a delta laod infoapckage, i tried init w/o data tranfer. request generated with '0' in the data target tab tab.
tried making it green and activate, i tried making it red and delete.. but its not getting deleted.. under update tab delta update option is enabled for infopackage
ERROR MEASSAGE
Processing in Warehouse timed out; processing steps mising
Diagnosis
Request processing in the BI system is taking a long time and processing step Second step in the update has still not been executed.
System Response
Caller is still missing.
Procedure
In the process overview in the BI system, check whether processes are running in the BI system under the background user.
If this is not the case, check the short dump overview in the BI system.
please let me know the solution to activate dso in process chain with this infopackage
Thanks,
venkatHi naidu,
Can you tell me why you want to delete the request? What is the scenario?
What do u mean by already have delta IP, i tried init w/o data transfer?
If its not allowing to delete the request from DSO...
Delete the entry from the below table ... RSICCONT ...it will get deleted from the DSo as well.
Later delete the init selections from IP menu --scheduler --> Init options for source system --> delete the init request .
Tcode - se11 --RSICCONT -> enter the request and from menu select the option delete...it will delete the entry from DSO. -
Process Chain - Unable to delete overlapping request
Hi Gurus
I'm in the mid of creating process chain to load transaction data in which I need to delete the previous load that loaded in using the same DTP previously
In the process chain , i have included a process "Delete Overlapping Request from Infocube" . Once i'm in the screen of maintain variant for this process, i selected DTP as the object type but unable to find the DTP that i have created under the object name.
Can someone point out what is missing
Thank youHi,
Looks like you need to give the the techincal name of the DTP. if you are un able to find the technical name of the DTP you can find that in the transport organizer.
just drag and drop the infoprovider ( with dataflow before) you will ge the DTP as required.
note the technical name of the DTP .
include the technical name in the process and activate the process.
Santosh -
Unable to delete the request from ODS
Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your replyHi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi -
Unable to delete the request id in ODS....indicating partially activated
Dear All,
When I tried deleting a request from ODS, am unable to turn the QM status to red, itz indicating that the request is partially activated. When I tried deleting the request without changing the status, the delete icon is popped up, but eventually goes back to the previous status and hence does not get deleted.
Due to the above, the subsequent requests coming into the ODS are not getting activated at all...
I tried running the function module RSBM_GUI_CHANGE_USTATE, to delete the request, but to no success. Similarly, when I tried locating the requests in the four tables RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ, could not found the request id to be deleted in any of these 4 tables.
Please suggest some solution as it is of high importance...
Thanks and Regards,
Edited by: sachitp on Feb 27, 2011 12:25 PMHi,
You can try the below options,
1. Remove the request data from the active table using the function
to delete data selectively.
You must enter selection criterion to select the data of the
aborted request.
2. Use Transaction SE37 to execute the 'RSAR_ODS_API_DEL' function
module as follows:
I_REQUEST <Name of the activation request>
I_DATE <current date>
3. Use Transaction SE16 to delete all entries for this request and
for this ODS object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE
and RSODSACTREQ tables.
Thanks,
Vinod -
Urgen t- unable to deleted a request in ODS
Hi All,
I am trying to delete a request in ODS but the request is appearing again.
tried all the possible way. Can anybody help.
Thanks in advance
NarendraHi
If you wanted to delete the request any way, then
Now you can try to delete the same requests from the tables RSICCONT.
you have to modify the request no. from the table "RSMDATASTATE"(Request SID for which all requests are technically o.k.), RSBODSLOGSTATE (PSA ID )and RSODSACTREQ(Request ID and ODS activation ID).
Thanks,
Teja -
Unable to delete a request from a Cube which is loaded by Open hub to flat
Hi,
We have one Cube from which we are transferring data to a flat file by open hub.
the DTP for the OPEN HUB is delta DTP.
Now when i am trying to delete a request from Cube its not allowing me.
Its giving error as request is already updated to the target so delete the request from target first.
I tried deleting the open hub request entry from RSBKREQUEST table.
but still its not deleting the request from the Cube.
Can you please help me in solving this problem.
Thanks in Advance,I think request is having datamart, which is not allowing it to delete.
You can try to reset (delete) the datamart by clicking on it in cube request and then try to delete.
Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also. -
Unable to delete the request Id
When I tried to delete one Request Id, I got the following messages:
Previous request (ID 1924) has status 'red'
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 175'
I just installed SP10, why can I delete this request? And where can I find "Previous rquest (ID 1924)? It's not there.Can you please check the code in SE37 for this function module ..with the OSS note corrections...
I have pasted the corrections of OSS note
FUNCTION RSS2_DTP_RNR_SUBSEQ_PROC_SET
Delta 001Context Block
function rss2_dtp_rnr_subseq_proc_set.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(I_SID) TYPE RSSID
*" REFERENCE(I_TSTATE) TYPE RSBKTSTATE
*" REFERENCE(I_S_MSG) TYPE RSPC_S_MSG OPTIONAL
Delete Block
data: l_r_dtp_rnr type ref to cl_rsbk_request.
data: l_tstate type rsbktstate.
data: l_ustate type rsbktstate.
data l_r_error type ref to cx_rs_static_check.
Insert Block
*" EXPORTING
*" REFERENCE(E_T_MSG) TYPE RS_T_MSG
*" EXCEPTIONS
*" ERROR
data: l_r_dtp_rnr type ref to cl_rsbk_request.
data: l_tstate type rsbktstate.
data: l_ustate type rsbktstate.
data: l_r_error type ref to cx_rs_static_check.
data: l_s_msg type rs_s_msg.
data: l_line type i.
refresh e_t_msg.
do 1 times.
Delta 002Context Block
call method cl_rsbk_request=>create_from_db
exporting
i_requid = i_sid
receiving
r_r_request = l_r_dtp_rnr.
catch cx_rs_not_found into l_r_error.
Delete Block
message l_r_error type 'S'.
message x000.
Insert Block
message l_r_error type 'S'.
message x000.
l_line = 34.
exit.
Delta 003Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_ustate_red
exporting
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 69.
exit.
Delta 004Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further
i_no_commit = rs_c_true
i_s_msg = i_s_msg.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 85.
exit.
Delta 005Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-deleting
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 99.
exit.
Delta 006Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further
i_no_commit = rs_c_true
i_s_msg = i_s_msg.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 130.
exit.
Delta 007Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_ustate_red
exporting
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 146.
exit.
Delta 008Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-deleting
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 161.
exit.
Delta 009Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-deleted
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 175.
exit.
Delta 010Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further_start
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 197.
exit.
Delta 011Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further_start
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
data l_x.
while l_x is initial.
endwhile.
message l_r_error type 'X'.
Insert Block
data l_x.
while l_x is initial.
endwhile.
message l_r_error type 'X'.
l_line = 223.
exit.
Delta 012Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further
i_no_commit = rs_c_true
i_s_msg = i_s_msg.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
data l_x1.
while l_x1 is initial.
endwhile.
message l_r_error type 'X'.
Insert Block
data l_x1.
while l_x1 is initial.
endwhile.
message l_r_error type 'X'.
l_line = 241.
exit.
Delta 013Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further_start
i_no_commit = rs_c_true.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 264.
exit.
Delta 014Context Block
call method l_r_dtp_rnr->if_rsbk_request~set_tstate
exporting
i_tstate = rsbc_c_tstate-further_error
i_no_commit = rs_c_true
i_s_msg = i_s_msg.
catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
message l_r_error type 'X'.
Insert Block
message l_r_error type 'X'.
l_line = 279.
exit.
Delta 015Context Block
endif.
when others.
message x000.
endcase.
Delete Block
Insert Block
exit.
enddo.
if l_r_error is bound.
call function 'RS_EXCEPTION_TO_MESSAGE'
exporting
i_r_exception = l_r_error
changing
c_t_msg = e_t_msg.
l_s_msg-msgid = 'RSSTATMAN'.
l_s_msg-msgno = 102.
l_s_msg-msgty = 'E'.
l_s_msg-msgv1 = 'RSS2_DTP_RNR_SUBSEQ_PROC_SET'.
data: l_char(10) type c.
l_char = l_line.
l_s_msg-msgv2 = l_char.
append l_s_msg to e_t_msg.
data: l_on type sy-batch.
call function 'RSSM_RFC_IS_GUI_ON'
importing
on = l_on.
if l_on = 'Y'.
call function 'RSDC_SHOW_MESSAGES_POPUP'
exporting
i_t_msg = e_t_msg
i_txt = text-012
I_WITH_S_ON_EMPTY = RS_C_TRUE
I_ONE_MSG_DIRECT = RS_C_TRUE
I_ONE_MSG_TYPE_S = RS_C_TRUE
IMPORTING
E_S_EXIT_COMMAND =
endif.
raise error.
exit.
endif. -
Unable to delete the request through process chain
Hi,
We included program in a info package to delete the request based on snapshot date. its working fine when we ran info package manually but its not working when the infopackage is included in the process chain.
Kindly update us how to work on this.
Thanks & regards
BharathiHi Bharathi,
There are two options in delete request process of chain:
one is to use deletion seletion from Infocube .....infopackage settings
and second one is to set new in chain....
you should try first option...
Thanks
Arun Purohit -
Unable to delete the Requests in the data target---Process chain
Hello Gurus!
Can anyone plz help me out knowing this issue...
<b>Let me explain the whole scenario:</b>
Like when monitoring the process chains,one of the process chainhas a sequence of variants like:
load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
so....when i looked into the datatarget ODS1->manage->requests.
<b>i found that the info-pack1 requests status was RED.
info-pack2 requests status was YELLOW.
info-pack3 requests status was RED</b>.
ALL THE THREE R FULL UPDATES ONLY.
so suddenly one of our cologue deleted the all the three requests by making ino-pack2 requests to red.
when we r loading again the ino-pack1 again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
i hope that all understand the scenario..plz suggest me how to work on it
Thanks in advance!!!
DilipHi,
Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
Regards
Sankar
Maybe you are looking for
-
Error Message = 3205: '~WF_ADHOC-1446' is not a valid role or user name
Hi, I have an Item attribute of type 'Role' ('CREDIT_COMMITTEE_MEMBERS') and I am using that attribute as performer for two notification activities. For first notification, I create an adhoc role and assign it to the attribute and the notification go
-
Gives an error when running lm in embeded way
Hi all, I tried the following script but it gives me an error. cat("run embeded lm..") mod3 <- ore.doEval( function() { library(ORE) library(biglm) ore.sync(table="MSCI_DAILY_INDEX") dat <- ore.pull(ore.get("MSCI_DAILY_INDEX")) biglm(STD_EOD00D_LOCAL
-
Error when I preview my form in HTML using Adobe Livecycle Es4
Need help!!!! This is the error while I preview my form using HTML. Even though the from structure is present I am not able to preview my form. Please reply since it is a project deliverable and its an urgent requirement. Thanks in advance.
-
Need SOAP example that connect to Oracle DB
Hi, I have setup the Oracle SOAP service and have successfully deployed several trivial SOAP services. I have also created some simple JDBC code that queries scott/tiger database successfully. WHat I have not been able to do is make the JDBC code pas
-
I have a mac mini bought in May 2008, whenever I put a cd or dvd in the drive it makes a horrible grinding noise like it it bouncing on the edges of the disc. It completely freezes up the mac and I have to either pull the power or sometimes holding p