Unable to delete Failed Load Request from ODS

Hi Ev'one
I have a strange error.
I try to delete a couple of red requests from the ODS and they do not delete. When i see the log for this Job; it says there is an Invalid table name and i guess the request is also not present anywhere to delete. Any Suggestions on how to resolve this
This table is apparently present in the Prod Sytem and not present in the Dev and QA Systems.
Would appreciate any pointers to cure this.
Regards
Shweta

Hi Shweta,
   Go throuh the following OSS NOTE.
   We too faced the same problem.It was sorted with SP13
<b>Note 1020120 - P13:DSO: Restarting terminated, deletion w/o ODS request SID</b>
Assign points if it helps...
Regards
Prasad

Similar Messages

  • How to delete a specific request from ODS

    Hi all,
    We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is  for archive records. We need all of the records from  both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
    thanks,
    Yigit

    Hi,
    Thanks for your code. But is there any function module to delete most recent request from the ODS.
    I had 2 requirements...One in need to delete from ODS & Other one from Cube.
    FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
    Can please you send FM & ABAP Code to delete request from ODS.
    Thanks in advance.
    Yigit
    Message was edited by:
            Yigit

  • Delete the bad request from ODS.

    Hi,
    i am tring to delete the bad request form ods object but i am unable to delete the request from ods. i am using full uplaod and the processing is "psa and datatarget in parllel. when i check the data in PSA, it is giving "No data packet numbers could be determi request REQU_5SMPS3MTHYJHHUYQ62AM61H89".
    Thanks in advance,
    Kasi.

    Hi KAsi,
    I had a similar issue few weeks back, look in SM50 and chk if there are any processes still running which might lock the object. Also chk in st22 to see if any dumps are created under your login.  If tehre are any processes - you can try to cancel them or ask Basis to help u with it.
    *I guess* - when you hit delete, the delete  icon appears but is not able to lock(enqueue) the object and after sometime the delteion program cannot move forward and hence it returns to original status.
    regards
    Poonam

  • How to delete perviously loaded request from cube

    Hi All,
    I am loading a standard cube from r3 w/o PSA through DTP.
    1 ) how to delete data automatically from cube w/o using Process chains.( previously we have a facility in Infopackage to delete old loaded data ) .In BI7 how to delete the same automatically.
    2) How to schedule the DTP to run on daily basis( w/o process chain ) .I am not able to schedule it via RSRDA ?
    What might be the reason ?
    Regards
      KK

    Chivukula,
    I'm curious as to why you aren't using the process chains.  There's now a "delete overlapping request" process type within rspc.
    You are right thought, the DTP does not offer a facility to delete out the old loaded data.  This feature is not in BI 7.0
    As for scheduling a DTP to run daily, there's no way I know of to run it daily without rspc.  Yes I understand that rspc could get very messy but just create a separate holding area, say DAILY DTPS and put your DTP's in there.
    Cheers,
    Pom

  • Deactivate delta update before deleting the request from ODS

    Hi all,
    Happy New Year wishes to all.
    I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
          I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
    “Request 98888 already retrieved by data target BWVCLNT”
    “Delta update in data target BWVCLNT must be deactivate before deleting the request
    “Do you want to deactivate the delta update in data target BWVCLNT?
    So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
    “Delta request is incorrect REQXXXXXXX in the monitor”
    “A repeat needs to be requested”
    “Data target still include delta request REQXXXXX”
    “If the repeat is now loaded, then after the load”
    “There could be duplicate data in the data targets”
    “Request the repeat?”
    After execute changes it is showing only “zero” Records only.
    What is that mean and why zero records it is displaying instead of delta records.
    Anybody faces this type of problem please let me know. This is somewhat urgent to me
    Thanks and Regards
    Satish Chowdary

    <i>Hi Satish,
    First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
    I hope this helps.
    Thanks,
    Krish
    Dont Forget to assign Points.</i>
    Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

  • Unable to delete request from ODS - BW 3.5

    Hi experts,
    I am not able to delete request from ODS in BW 3.5, patch level 21. I put the request red, but it does not help to delete it. The request is full load and quite hudge (16GB). Deleting actually takes too long (several hours), but does not finish, so I cannot tell you any error description. It seems that this job can run forever... I was trying to activate the request before, but because of a tablespace limitations I received some short dumps. That is why I am trying to load it agin in smaller parts. It is strange thou that in Manage/requests tab the request has flag 'available for reporting' but the data cannot be viewed as active (only as new data). Any ideas, OSS notes?
    Thank you,
    Michal

    Hi,
    If you want to delete  requests manually from the ODS tables.
    1. tcode se16.
    2. delete the request in these tables : RSICCONT (delete activated requests OR
    Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
    request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
    You can check OSS Notes 947481
    Regards.

  • Unable to Delete failed requests from Infocube

    Dear Experts,
    I tried to uploaded the data through flat file. Since it has gone to Idle state i Killed the process. Now i Need to delete the red request from Infocube but It is not allowing me to delete the failed request. If I do so, I am getting ABAP runtime error.
    Please Suggest me . Its bit Urgent
    Many Thanks,
    Suraj

    Hi Suraj,
    There is might be a deadlock detected in the system
    So go the reqeust
    click on the details tab
    Each Package which is yellow or red has to be updated manually (right click – Manual Update). This can take few minutes.
    Change request status to green
    Change to Status – doppleclick on total status
    Change from red to “Delete status;back to request status”
    Note:
    This case is only applicable, if the data are stored in PSA.

  • Problem in deleting the request from ODS......

    Hi,
    I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
    Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
    Can some body let me know how to STOP/DELETE the old request??  I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
    Thanks Jeetu

    Hi Jeetu,
    Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
    Hope there will be large volume of data !
    Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
    I too faced the same issue but i am helpless i could not stop the data load inthe middle!
    If you found any solution for this let me also know
    Thanks
    Ram

  • Problem in deleting request from ODS

    Hi,
    I did an init load from newly created update rule for my existing ODS. I cancelled the INIT load as it was taking a long time and tried to delete the request from ODS, but when i deleted the request it is not getting deleted. Under request/DTP it is showing 'Request without Monitor Log: APO Request or Terminated Request Generation'. Can you please tell me how to delete this request.
    Regards,
    Raghavendra.

    Hi,
      The load is from One ODS to another. The problem is i deleted the init, but there is a request in ODS as in mentioned above which i am not able to delete. Help needed.
    Regards,
    Raghavendra.

  • Need to delete a request from ODS

    HI
    i need to delete a request from ODS Full update,It failed.I forced it to activate for testing and the request turned green.But iam not able to delete the request now as the job log says it has incorrect status and now not able to change the QM action of Request as it has already been activated.Now how do i delete this request.
    Thanks
    RAJ

    Hai,
    I think your request has been partially activated so you are not able to delete the request.
    If u really need that request to be deleted then see that there sholud not be any request above that one.
    Try to make the request red in manage screen and it will pop up a window which is having start no and cancel click no
    and then try to delete the request.
    If not need that request make the qm status red and leave it the data will be available for reporting.
    Regards.
    Vikram Singh

  • Unable to delete the last request in full load infopackage

    Hi All,
    I have full load infopackage with many requests with green status  and thier request genetaed is 0.
    Because of last failure request ia m aunable to activate dso.
    i Made last failure request green and triggered. but not successful.
    i made it red and tried deleting, no sucess. when i delete its giving Dump
    Now i am unable to delete the first request in green status also.its not deleting.
    can i delete whole data in dso and do full load again? how to check if there any other infopackages  on this dso..
    ALL This issues camw across triggering process chian...plz let me know oyur answers....
    Thanks,
    Venkat

    Hi Venkatesh,
    I tried deleting through  RSODSACTREQ.. but the delete option was disabled in the  TABLE ENTRY TAB.
    The last request is failed one with red and not tranfered with full records..
    All the other records which are in green status  does not have symbol genated for reporting purpose and
    Request id generated up on activation is zero..
    I  tried deleting the first request.. when i change its satus to red...
    QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
    The M version is then activated if necessary  Now?
    Req. 0001439786 in DataStore Z[DSONAME]must have QM
    status green before it is activated
    Request 0001427251 is not completely activated.
    Please activate it again.
    But i am unable to find  both the requests under psa and  in adminstartion data target tab... there are some other requests with red status iin psa...
    When i try to delete failed request its giving dump
    Thanks,
    Venkat.

  • Selective deletion of request from ODS which is activated and updated

    Hi all,
    I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated  and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
    Many thanks in advance,
    BRB

    Hi
    Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
    You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
    If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
    As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
    This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
    Regards,
    H.J.

  • Delete overlapping requests from ODS

    Hi,
    Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
    Can we still delete overlapping request using abap code or the only way to do it is to delete  data (selective deletion) in a start routine.
    Any tips would be helpful

    Hi ,
    Try the following logic to delete the ovelapping requests from a particular data source.
    *& Report  ZV_DELETE_REQS                                              *
    *&Description:This program is for deletion of eixsting Full requests   *
    *&            from ODS                                                                     *
    REPORT  ZV_DELETE_REQS.
    data: RSICCONT like rsiccont,
          rsseldone like rsseldone.
    data: begin of i_req occurs 0,
          rnr like RSICCONT-rnr,
          end of i_req.
    refresh i_req.
    select * from RSICCONT UP TO 2 ROWS
                      where ICUBE  = 'ZCS_D10'
                      order by TIMESTAMP descending.
      i_req-rnr = rsiccont-rnr .
      append i_req.
      clear i_req.
    endselect.
    loop at i_req.
      select single * from RSSELDONE where RNR eq i_req-rnr and
                      source in ('0CO_OM_OPA_5',
                                 '0CS_OM_OPA_1').
      if sy-subrc eq 0.
        CALL FUNCTION 'RSSM_DELETE_REQUEST'
          EXPORTING
            REQUEST                    = i_req-rnr
            INFOCUBE                   = 'ZCS_D10'
          EXCEPTIONS
            REQUEST_NOT_IN_CUBE        = 1
            INFOCUBE_NOT_FOUND         = 2
            REQUEST_ALREADY_AGGREGATED = 3
            REQUEST_ALREADY_COMDENSED  = 4
            NO_ENQUEUE_POSSIBLE        = 5
            OTHERS                     = 6.
        IF SY-SUBRC <> 0.
          MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
              WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
        else.
          message i799(rsm1) with i_req-rnr 'deleted'.
        ENDIF.
        do.
          select single * from RSICCONT where ICUBE  = 'ZCS_D10'
                                          and  rnr    = i_req-rnr.
          if sy-subrc ne 0.
            exit.
          endif.
        enddo.
      endif.
    endloop.
    hope it helps....
    regards,
    raju

  • To delete a request from ODS

    Hello all,
    I am not able to delete the request from ODS .
    It gives the error message :no request found in the change log.
    how shlould i delete the request??
    thnx in advance.
    Regards,
    Dhanya.

    Hello,
    thnx sriram n balaji!
    i checked my infosource through the prgm:RSAR_PSA_CLEANUP_DIRECTORY
    the following message appears in the display log:
    PSA: 8ZFIADS11_CA
    Version 000 technical name /BIC/B0000043000
    Partition 0003
    Request Ratio:[Deleted:Total]->1 :2
    Records Ratio:[Deleted:Total]->753943 :1507886 ,50 % logically deleted
    Partition 0004
    Request Ratio:[Deleted:Total]->0 :1
    Records Ratio:[Deleted:Total]->0 :753943 ,0 % logically deleted
    what should i infer from this ?
    can anyone please tell me the step by step procedure to delete the request.
    Regards,
    Dhanya.

  • Can we delete particular request from ODS

    Hi All,
    Can't we delete particular request from ODS?
    there are dozen of successful requests in ODS, when i deleted one successful request from the middle, all the subsequent requests lost the tick which indicates they are updated to cube. Is there any way that i can undo this one?
    can we do selective request(successful) deletion from ODS?
    Thanks in advance.
    Robyn.

    Hi Samara,
    what i was trying to do is re-arranging the requests according to chronological order, which are not in. imagine the scenario
    ODS requests      cube request
    5         ->             E
    4         ->             D
    2         ->             B
    3         ->             C      
    1         ->              A
    what iam trying to do is put them in sequence
    ODS request        cube request
    5                           E
    4                           D
    3                           C
    2                           B
    1                           A
    If i delete 3rd ODS request put it over 2 it won't accept as the request number is lesser than that of 2nd request.
    can we reconstruct any request from reconstruction tab or just the latest request?
    How does this effect the data which is already updated to cube from ODS?
    Regards,
    Robyn.
    Message was edited by:
            Robyn Hoggard
    Message was edited by:
            Robyn Hoggard

Maybe you are looking for