Unable to delete incorrect journals created manually
Not able to delete a manually entered Incorrect journal because Funds are reserved. When trying to unreserve funds following error message appears:
APP-SQLGL-08204: Your transaction(s) failed funds unreservation
Can you please advice on how to proceed with unreservation and deletion of the journal?
Regds,
Jaya
Hi,
You could try and find more information from the logs, first change the level of logging for EPMA, it is set as standard to INFO and it is probably best changed to DEBUG.
To do this
Stop EPMA
Go to the deployed Web application directory.
For Tomcat, this is C:\Hyperion\deployments\Tomcat5\EPMAWebTier\webapps\awb\WEB-INF\conf.
Open AWBLog4j.properties.
Modify this line:
log4j.logger.com.hyperion.awb=ERROR,logfile, stdout to log4j.logger.com.hyperion.awb=DEBUG ,logfile, stdout
RESTART EPMA
Then try and delete again and check to see if the logs have further information.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
My photos have duplicated but am unable to delete the extra one manually!! Help!!
My photos have duplicated but am unable to delete the extra one manually! In some cases they have tripled! Help!
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
Unable to delete Planning application created through EPMA
Hi friends,
Iam unable to delete the planning application created through EPMA.Tried logging in as admin still its not allowing.
I tried in application view-> right click and delete.it will ask for all related info and when I say 'delete', the status is aborted.
Can anyone tell whether we can delete an application created through EPMA. or is there a way to delete in backend.
Regards.Hi,
You could try and find more information from the logs, first change the level of logging for EPMA, it is set as standard to INFO and it is probably best changed to DEBUG.
To do this
Stop EPMA
Go to the deployed Web application directory.
For Tomcat, this is C:\Hyperion\deployments\Tomcat5\EPMAWebTier\webapps\awb\WEB-INF\conf.
Open AWBLog4j.properties.
Modify this line:
log4j.logger.com.hyperion.awb=ERROR,logfile, stdout to log4j.logger.com.hyperion.awb=DEBUG ,logfile, stdout
RESTART EPMA
Then try and delete again and check to see if the logs have further information.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to delete a journal using Group ID
Hello guys,
I have an imported journal that needs to be deleted. I used the delete journal window, issued the group id, the source and the request id and submitted the delete program but the journal could not be deleted. Though, the progrm completed normal.
Any idea will help.In which table is the data still appearing?
Headers?
If so query the Journal from front end and delete it. -
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
AppleFAN7591 wrote:
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
I am anew user.
Initially I created several folders for my photos on the iPad itself but now know how to transfer photo folders using iTunes. However I am unable to delete/remove the now empty folders I created in iPad.
Can anyone assist me please
ThanksWhen you are in Album view in the Photos app - tap the edit button in the upper right corner - tap the X in the corner of the album to delete it.
-
Unable to delete/create integration models.
Hi All,
I need to correct some int.models wrt the logical system.
1) CFM1 u2013 choose variant pops up a msg- logical system not maintained in NDV2. This is not supposed to be maintained. I need to change the variant models for a different logical system that is maintained in NDV2.
2) CFM7- delete all models.- I am unable to delete the models even after making them inactive.
Final objective is to delete all the models- active and inactive and recreate new ones as nomenclature needs to be same. I canu2019t maintain the wrong (present) logical system in img, that's seen in the IM variants that do not lend themselves to change. The moment i do CFM1 it pops up a an error screen referring a wrong logical system..
Pls., guide step by step.
Regards,
LokThanks Lakshmi,
I began on the same note as wass evident but i did not have the wb request auth required. so was thinking if there is another was out fiddling with user transactions of IMs
Thanks for prompt reply. Awarded full 10 points.
Regards.
Lok -
Unable to delete row or amend transaction in Cash Journal
Dear All,
I tried to post an amount in CJ. The tax amount should be zero. I have selected the zero tax code.
System is not allowing for posting. Unable to delete or reverse the transaction.
The followng msg shown in the check box
"Tax does not equal 0 when tax percentage rate is zero."
Need help and guidelines from the experts.
Thanks in advance.
Regards,
VMhi
can you try it once
If you want to reverse particular transaction> Select that particular row and SHIFT+F2, give reversal reson and posting date.
Edited by: sindhu on Feb 22, 2010 10:57 AM -
Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.
Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
Unable to delete the interchangeability groups
Hi all,
Unable to delete the interchageabilty groups.
Error: Package does not exists
Can you please guide me to delete the IC groups.
Regards
KPN MurthyHi,
Some information regarding "package does not exsit".
This type of error usually occurs if the planning package is created manually and assigned to the product at //mat1.So,delete the package in in PPDS Tab,and recheck the issue. For the affected product(s) I think you had manually created the package without a Heuristic assignment to it,which is not allowed.
Check SAP help:[http://help.sap.com/saphelp_scm2007/helpdata/en/c1/147a375f0dbc7fe100000 09b38f8cf/frameset.htm]
Best Regards,
Ada -
Hi all,
I am unable to delete one applet which I have loaded in the card.
There are 2 applets, one is purse and other is loyalty. And am using shareable interface in which loyalty is the server and purse is the client. I can delete the purse applet but i can't delete the loyalty from the card.
Here is my code : There are in all 3 codes, one is purse, second is loyalty code and third is the shareable interface code. Can some one look at the code and tell me what's wrong in this programs.
package com.gemplus.examples.loyalty;
import javacard.framework.*;
import visa.openplatform.*;
public class Loyalty extends javacard.framework.Applet implements TestInterface
static byte points ;
protected Loyalty(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)(1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)(1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 4)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
// points = 0;
// register this instance
register(buffer, (short)(offset + 1), (byte)buffer[offset]);
* Method installing the applet.
* @param bArray the array constaining installation parameters
* @param bOffset the starting offset in bArray
* @param bLength the length in bytes of the data parameter in bArray
public static void install(byte[] bArray, short bOffset, byte bLength) throws ISOException
/* applet instance creation */
new Loyalty (bArray, bOffset, (byte)bLength);
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
/* return status of selection */
return true;
* Deselect method.
public void deselect()
return;
public void process(APDU apdu) throws ISOException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
apdu.setIncomingAndReceive();
byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
creditPoints((byte)0x00);
apduBuffer[5] = (byte)(points >> 8) ;
apduBuffer[6] = (byte)points ;
// sends the APDU response
// switches to output mode
apdu.setOutgoing() ;
// 2 bytes to return
apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
apdu.sendBytes((short)5, (short)2) ;
public void creditPoints(byte pTobeCredited)
points += pTobeCredited;
public Shareable getShareableInterfaceObject(AID client, byte param){
if(param != (byte)0x00)
return null;
return (this);
second code is :
package com.gemplus.examples.oppurse;
* Imported packages
import javacard.framework.*;
import visa.openplatform.*;
import com.gemplus.examples.loyalty.*;
public class OPPurse extends javacard.framework.Applet
// the APDU constants for all the commands.
private final static byte INS_GET_BALANCE = (byte)0x30 ;
private final static byte INS_DEBIT = (byte)0x31 ;
private final static byte INS_CREDIT = (byte)0x32 ;
private final static byte INS_VERIFY_PIN = (byte)0x33 ;
private final static byte INS_SET_NAME = (byte)0x34 ;
private final static byte INS_GET_NAME = (byte)0x35 ;
// the OP/VOP specific instruction set for mutual authentication
private final static byte CLA_INIT_UPDATE = (byte)0x80 ;
private final static byte INS_INIT_UPDATE = (byte)0x50 ;
private final static byte CLA_EXTERNAL_AUTHENTICATE = (byte)0x84 ;
private final static byte INS_EXTERNAL_AUTHENTICATE = (byte)0x82 ;
// the PIN validity flag
private boolean validPIN = false;
// SW bytes for PIN Failed condition
// the last nibble is replaced with the number of remaining tries
private final static short SW_PIN_FAILED = (short)0x63C0;
private final static short SW_FAILED_TO_OBTAIN_SIO = (short)0x63D0;
private final static short SW_LOYALTY_APP_NOT_EXIST = (short)0x63E0;
// the illegal amount value for the exceptions.
private final static short ILLEGAL_AMOUNT = 1;
// the maximum balance in this purse.
private static final short maximumBalance = 10000;
// the current balance in this purse.
private static short balance;
/* byte[] loyaltyAID = new byte[]{ (byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,
(byte)0x19,(byte)0xFF,(byte)0x00,(byte)0x00,
(byte)0x00,(byte)0x00,(byte)0x00,(byte)0x00,
(byte)0x00,(byte)0x00,(byte)0x02,(byte)0x02};*/
/* Security part of declarations */
// the Security Object necessary to credit the purse
private ProviderSecurityDomain securityObject = null;
// the security channel number
byte secureChannel = (byte)0xFF;
// the authentication status
private boolean authenticationDone = false;
// the secure channel status
private boolean channelOpened = false;
private byte[] nameBuffer = new byte[6];
* Only this class's install method should create the applet object.
protected OPPurse(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)( 1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)( 1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 2)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
} else {
// Install parameter compliant with OP 2.0.
if(length != 2)
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + length));
// retreive the balance value from the APDU buffer
short value = (short)(((buffer[(short)(dataOffset + 1)]) & 0xFF)
| ((buffer[dataOffset] & 0xFF) << 8));
// checks initial balance value
if(value > maximumBalance)
ISOException.throwIt(ISO7816.SW_DATA_INVALID);
// initializes the balance with the APDU buffer contents
balance = value;
// register this instance as an installed Applet
register();
// ask the system for the Security Object associated to the Applet
securityObject = OPSystem.getSecurityDomain();
// applet is personalized and its state can change
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
// build the new ATR historical bytes
byte[] newATRHistory = new byte[]
// put "OPPurse" in historical bytes.
(byte)0x4F, (byte)0x50, (byte)0x50, (byte)0x75, (byte)0x72, (byte)0x73, (byte)0x65
// !!! ACTIVATED IF INSTALL PRIVILEGE IS "Default Selected" (0x04). !!!
// change the default ATR to a personalized's one
OPSystem.setATRHistBytes(newATRHistory, (short)0, (byte)newATRHistory.length);
* Method installing the applet.
* @param installparam the array constaining installation parameters
* @param offset the starting offset in installparam
* @param length the length in bytes of the data parameter in installparam
public static void install(byte[] installparam, short offset, byte length )
throws ISOException
// applet instance creation with the initial balance
new OPPurse(installparam, offset, length );
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
validPIN = false;
// reset security if used.
// In case of reset deselect is not called
reset_security();
// return status of selection
return true;
* Deselect method.
public void deselect()
// reset security if used.
reset_security();
return;
* Method processing an incoming APDU.
* @see APDU
* @param apdu the incoming APDU
* @exception ISOException with the response bytes defined by ISO 7816-4
public void process(APDU apdu) throws ISOException
// get the APDU buffer
// the APDU data is available in 'apduBuffer'
byte[] apduBuffer = apdu.getBuffer();
// the "try" is mandatory because the debit method
// can throw a javacard.framework.UserException
try
switch(apduBuffer[ISO7816.OFFSET_INS])
case INS_VERIFY_PIN :
verifyPIN(apdu);
break ;
case INS_GET_BALANCE :
getBalance(apdu) ;
break ;
case INS_DEBIT :
debit(apdu) ;
break ;
case INS_SET_NAME :
setName(apdu);
break;
case INS_GET_NAME :
getName(apdu);
break ;
case INS_CREDIT :
credit(apdu) ;
break ;
case INS_INIT_UPDATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_INIT_UPDATE)
// call initialize/update security method
init_update(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case INS_EXTERNAL_AUTHENTICATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_EXTERNAL_AUTHENTICATE)
// call external/authenticate security method
external_authenticate(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case ISO7816.INS_SELECT :
break ;
default :
// The INS code is not supported by the dispatcher
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED) ;
break ;
} // end of the switch
} // end of the try
catch(UserException e)
// translates the UserException in an ISOException.
if(e.getReason() == ILLEGAL_AMOUNT)
throw new ISOException ( ISO7816.SW_DATA_INVALID ) ;
//- P R I V A T E M E T H O D S -
* Handles Verify Pin APDU.
* @param apdu APDU object
private void verifyPIN(APDU apdu)
// get APDU data
apdu.setIncomingAndReceive();
// get APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// check that the PIN is not blocked
if(OPSystem.getTriesRemaining() == 0)
OPSystem.setCardContentState(OPSystem.APPLET_BLOCKED);
// Pin format for OP specification
// |type(2),length|nible(1),nible(2)|nible(3),nible(4)|...|nible(n-1),nible(n)|
// get Pin length
byte length = (byte)(apduBuffer[ISO7816.OFFSET_LC] & 0x0F);
// pad the PIN ASCII value
for(byte i=length; i<0x0E; i++)
// only low nibble of padding is used
apduBuffer[ISO7816.OFFSET_CDATA + i] = 0x3F;
// fill header TAG
apduBuffer[0] = (byte)((0x02 << 4) | length);
// parse ASCII Pin code
for(byte i=0; i<0x0E; i++)
// fill bytes with ASCII Pin nibbles
if((i & 0x01) == 0)
// high nibble
apduBuffer[(i >> 1)+1] = (byte)((apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F) << 4);
else
// low nibble
apduBuffer[(i >> 1)+1] |= (byte)(apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F);
// verify the received PIN
// !!! WARNING PIN HAS TO BE INITIALIZED BEFORE USE !!!
if(OPSystem.verifyPin(apdu, (byte)0))
// set PIN validity flag
validPIN = true;
// if applet state is BLOCKED then restore previous state (PERSONALIZED)
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
return;
// the last nibble of returned code is the number of remaining tries
ISOException.throwIt((short)(SW_PIN_FAILED + OPSystem.getTriesRemaining()));
* Performs the "getBalance" operation on this counter.
* @param apdu The APDU to process.
private void getBalance( APDU apdu )
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
apduBuffer[5] = (byte)(balance >> 8) ;
apduBuffer[6] = (byte)balance ;
// sends the APDU response
// switches to output mode
apdu.setOutgoing() ;
// 2 bytes to return
apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
apdu.sendBytes((short)5, (short)2) ;
private void setName(APDU apdu)
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated
if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
byte[] apduBuffer = apdu.getBuffer();
apdu.setIncomingAndReceive();
for(short i=0,k=5;i<6;i++,k++)
nameBuffer[i] = apduBuffer[k];
}//end of setName
private void getName(APDU apdu)
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
byte[] apduBuffer = apdu.getBuffer();
for(short i=5, k=0;i<11;i++,k++)
apduBuffer=nameBuffer[k];
apdu.setOutgoing();
apdu.setOutgoingLength((short)6);
apdu.sendBytes((short)5,(short)6);
}//end of storeName
* Performs the "debit" operation on this counter.
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid.
* @exception UserException If the amount to debit is invalid.
private void debit(APDU apdu) throws ISOException, UserException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated
if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// Gets the length of bytes to recieved from the terminal and receives them
// If does not receive 4 bytes throws an ISO.SW_WRONG_LENGTH exception
if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH) ;
// Reads the debit amount from the APDU buffer
// Starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8 ) & (short)0x0000FF00));
// tests if the debit is valid
if((balance >= amount) && (amount > 0))
// does the debit operation
balance -= amount ;
// writes the new balance into the APDU buffer
// (writes after the debit amount in the APDU buffer)
apduBuffer[7] = (byte)(balance >> 8) ;
apduBuffer[8] = (byte)balance ;
// sends the APDU response
apdu.setOutgoing() ; // Switches to output mode
apdu.setOutgoingLength((short)2) ; // 2 bytes to return
// offset and length of bytes to return in the APDU buffer
apdu.sendBytes((short)7, (short)2) ;
/*short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
if(loyaltyID == null)
ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
TestInterface sio = (TestInterface)(JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00));
if(sio == null)
ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
sio.creditPoints(points);*/
else
// throw a UserException with illegal amount as reason
throw new UserException(ILLEGAL_AMOUNT) ;
/* byte points = (byte)0x0A;
//short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
if(loyaltyID == null)
ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
TestInterface sio = (TestInterface)JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00);
if(sio == null)
ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
sio.creditPoints(points);*/
* Performs the "credit" operation on this counter. The operation is allowed only
* if master pin is validated
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid or if the amount to credit
* is invalid.
private void credit(APDU apdu) throws ISOException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated and authentication is done
if (!validPIN || !authenticationDone)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// gets the length of bytes to recieved from the terminal and receives them
// if does not receive 2 bytes throws an ISO.SW_WRONG_LENGTH exception
if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
throw new ISOException(ISO7816.SW_WRONG_LENGTH) ;
// reads the credit amount from the APDU buffer
// starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8) & (short)0x0000FF00));
// tests if the credit is valid
if(((short)(balance + amount) > maximumBalance) || (amount <= (short)0))
throw new ISOException(ISO7816.SW_DATA_INVALID) ;
else
// does the credit operation
balance += amount ;
* Performs the "init_update" security operation.
* @param apdu The APDU to process.
private void init_update( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
// close the openned security channel
try
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
try
// open a new security channel
secureChannel = securityObject.openSecureChannel(apdu);
// set the channel flag to open
channelOpened = true;
// get expected length
short expected = apdu.setOutgoing();
// send authentication result
// expected length forced to 0x1C
apdu.setOutgoingLength((byte)0x1C);
apdu.sendBytes(ISO7816.OFFSET_CDATA, (byte)0x1c);
catch(CardRuntimeException cre)
// no available channel or APDU is invalid
ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
* Performs the "external_authenticate" security operation.
* @param apdu The APDU to process.
private void external_authenticate( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
try
// try to authenticate the client
securityObject.verifyExternalAuthenticate(secureChannel, apdu);
// authentication succeed
authenticationDone = true;
catch(CardRuntimeException cre)
// authentication fails
// set authentication flag to fails
authenticationDone = false;
// close the openned security channel
try {
securityObject.closeSecureChannel(secureChannel);
} catch(CardRuntimeException cre2) {
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
// send authentication result
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// send authentication result
ISOException.throwIt(ISO7816.SW_NO_ERROR);
else
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
* The "reset_security" method close an opened secure channel if exist.
* @return void.
public void reset_security()
// close the secure channel if openned.
if(secureChannel != (byte)0xFF)
try
// close the openned security channel
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// reset security parameters
secureChannel = (byte)0xFF;
channelOpened = false;
authenticationDone = false;
return;
and the 3rd code is:
package com.gemplus.examples.loyalty;
import javacard.framework.Shareable;
public interface TestInterface extends Shareable
// public void creditPoints(byte points) ;
public void creditPoints(byte points) ;
Thanks in advance......Thanks. I know they are not the same thing. A package cannot be deleted if it contains one or more applets.
I tried to delete by typing in the applet AID first, but it just doesn't work. And of course it doesn't work for package AID.
Both the package and applet AID are generated in JBuilder, which looks like this, package AID(6D 79 70 61 63 6B 61 67 31),
applet AID(6D 79 70 61 63 30 30 30 31),
instance AID(6D 79 70 61 63 30 30 30 31)
I've tried those three AIDs, it's not working.
Thanks. -
Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop
Hello,
We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
you'll need administrator permission to delete this file, with the prompt for administrator access.
They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
file.
I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.Hello Bria,
What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
There are two GPO settings that could prevent the user from deleting his/her own items:
User
Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
Hide these specified drives in My Computer
Prevent access to specified drives in My
Computer
There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect. -
Unable to delete songs from my iPad 2
Last night for the first time ever I had problems updating iOs (version 7.0.4) on my iPad 2. I kept getting one of several messages, for example, saying: iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. I went through the update three times before it finally worked.
Then I found that I had every song that I had ever purchased cluttering up -- and filling up -- my iPad. Although in the past I was able to delete either a single song or an entire album, I am now UNABLE TO DELETE ANY SONG.
I have the iTunes setting on Manual update and have attempted to completely disconnect the disgusting iCloud feature. However, it appears that iCloud is NOT disconnected.
I happily use the iPad 2 ONLY for a very few uses on a daily basis. I wish to control ALL my music from my iMac.
I've been with Apple since 1984, but I'm seriously thinking of ditching this iPad 2 for a Samsung product.
Any assistance will be appreciated.Somehow I got 12 songs on my ipad mini that I could not remove.
I stumbled across a solution. Plug in the ipad and UN-check "sync music" to remove all but the remaining unwanted song. Find the song in your itunes library and right click these unwanted songs and RE-ADD it directly to the ipad.
The ipad should automatically re-check "sync music" and show one song being synced. Now manually UN-check the sync music box again and the warning will come up "are you sure...existing songs...removed". Select remove and click the "apply" button in itunes. Once the changes are applied, you should see the song remove itself from your ipad.
Good luck! -
Unable to delete emails from care4free using thunderbird
I have just bought an imac and have transfered my thunderbird account from my old pc. I am unable to delete messages from my care4free POP account. Anyone help with this please?
Problems associated with deleting or moving email usually stem from failure to compact mail
folders, especially inboxes. This is because deleted email is not removed from the
application until you compact (expunge is the technical term). This can be done
automatically by a setting in your email account. Manually is simple enough. On any mail
folder do this: right click/compact (or File/Compact Folders). This is especially important
on inboxes but also, any folder from which you regularly delete/move email.
If you are experiencing problems you probably have a lot of uncompacted mail so be patient
the first time and watch the activity bar for its status (at the bottom of the application).
Mario Pauls
Running Thunderbird 24.3.0
Windows Vista Home Premium
Used Thunderbird with Lightning integrated since 2005
Find more useful info here:
http://forums.mozillazine.org/viewtopic.php?f=39&t=2638361
rais
Posts: 951
Joined: May 25th, 2011, 8:57 pm
Post Posted January 7th, 2013, 6:47 pm
two things just for starters:
Archive all the mail currently in the Inbox
http://kb.mozillazine.org/Archiving_your_e-mail
enable AutoCompact
http://kb.mozillazine.org/Compacting_fo ... omatically
Last edited by rais on January 8th, 2013, 3:01 am, edited 1 time in total. -
Unable to delete rows from Target.
Hello everyone,
I am unable to delete rows from target data store. Here is what I have done.
Source Oracle 10g - staging 11g - Target Oracle 11g
I have implemented consistent set CDC on data model in staging and added 2 tables to CDC and turned on the journals . Both tables A and B are joined together via Column E (primary key of table A). Table A is the master table(has foreign key). Table B is child table. Target column consists of all the columns of both table A and B.
Following is what I am able to do and not to do
ABLE TO DO. If data is inserted into both or any of journalized tables I can successfully load the same in target by performing following steps. 1. Extend the consistency window at model level. Lock subscriber. Run the interface with any source table marked as Journalized data only. Unlock subscriber and purge journal.
ABLE TO DO. If data is updated in any of the journalized table, along with the steps mentioned above I can execute two interfaces. In one Interface table A marked as journalized data only Joined with table B and in second interface table B marked as Journalized data only joined to table a.
NOT ABLE TO DO If data is deleted from one or both tables it shows up as journalized data in JV$D<tablename> marked as D with date and subscriber name but when i run the interface by extending the window , locking subscriber executing both interfaces, unlock subscriber purge journals. no change takes place is Target. After unlocking subscriber step, journalized data gets removed from JV$D view. Please let me know what I am doing wrong here. How can rows delted from source can also be deleted from TARGET?
NOTE : In the flow table SYNC_JRNL_DELETES is YES
In moel under jounalized table tab Table have following order Table A folloed by Table B
Thanks in advance
GreenwichSorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
If so then I repeat my self :-) Why not to connecting to the SQL server directly?
* even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
[Personal Site] [Blog] [Facebook]
Access app is the legacy app.
Maybe you are looking for
-
Purchasing Cube re Initialization
Hai Friends, I am going to re initialize the Purchasing Cube in BW side. Please tell What all are the steps will do in R/3 Side before re initialize the Cube in BW. Thank You Balajee Kannan
-
Confuse about the injecting entity in EJB 3.0?
Hi all, I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer). Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB
-
Can you run Bridge CC in the Background the way you could with cs4, cs5, etc ?
One of the best things about Bridge was that I could run it in the background (as in there is a little Br icon near my clock) and not have it taking up a space on my task bar. I cannot seem to figure out how to do this with CC. Any suggestions? Ru
-
GATP Allocation Check w/ 3rd Party Drop Ship or Make-to-Order
Experts, For our stocked materials we currently do an allocation check in APO. We now need to do the same allocation check in a MTO (TAB) or 3rd party drop ship (TAS) scenario. However, we are not able to get the allocation check to get accross to
-
I am currently running devicenet on labview 6i to communicate to a slc500 plc. I am trying to upgrade labview 6i to 6.1. If i use the windows search function, I am still unable to locate these vis. When i try to upgrade i am unable to run the applica