Unable to delete newly CIFed resources

Dear All
We CIFed few workcenters which by mistake came as multimixed resources (instead of single mix). Now we are try to delete them using /SAPAPO/RES01 (change mode). As the first step, we have to remove them from active version first. When we try to remove them from active version and model i.e. 000, we get the message : u201CSystem error: Error occurred in the COM viewu201D Message no. /SAPAPO/DMRES051. (information message) and the resources are not deleted from the model.
We took the another path : Tried to delete them using supply chain engineer. In this case we get the message " Live cache error during check re dependent objects".
Since these are newly CIfed objects, we don't have any PPMs or any orders for them in APO. We are wondering:
1. What are re-dependent objects and how come system is checking for them?
2. Is there any way to delete these resources?
We don't face the same problem in QA system.
Regards
DG

Dear Vijay \ Virendra
We don't have any PPMs or orders on these resources. Also this error is coming during their deletion from the model.
We tried OM16. there are no dependent objects of any type (last button - branch). Also when we compare OM16 output for QA (where we can delete them) and production (where we are not able to delete them), we don't find any difference (except the internal resource name etc).
In Fact we tried one exercise where we created a new resource (from a newly CIFed resource), assigned it to 000 and tried to deassign it (Without saving it yet), we got the same error. however if we repeat the same steps in QA, it get deassigned from model easily.
Regards
DG

Similar Messages

Unable to delete JCA resource adapters

Hi All,
I am unable to delete resource adapter. Please help
Here is the error "Deleting JCA Connection Factory: InboundRA_QN1_100 failed due to: Removing or adding connection definition "InboundRA_QN1_100" failed because "It is not allowed to remove the last connection definition.""

Hello Dheeraj,
Check the kba 1942002 Deleting JCA Connection Factory fails with "it is not allowed to
remove the last connection definition". This covers this same topic.
Regards
Mark

HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

I cannot fully uninstall iTunes because I am unable to delete the commonfiles\apple folder

I received error 42404 after updating to itunes 11, and have attempted to follow the instructions at http://support.apple.com/kb/HT1925. However, my Vista will not let me delete the commonfiles\apple folder. How can I delete it?
The day of iTunes 11's release, I updated my iTunes, then opened up the prgm to take a look at it. I was immediately brought to the attention that the program didn't install correctly (with error 42404), so I uninstalled iTunes and reinstalled it, with the same error coming up. I continued to use iTunes and see if i could ignore the issue, however I discovered I was unable to log into my itunes acount on the store.
So I followed the isntructions at http://support.apple.com/kb/HT1925 correctly, deleted the remaining files/folders, except I am still unable to delete the C:\Program Files\Common Files\Apple\ folder. I attempt to delete it, it asks me for permission to do so, I say continue, and even after I give it permission to delete the folder, it instantly says to me, "You need permission to perform this action," and it gives me the options to cancel or try again (which immediately brings this same window up again asking me to try again).
I've done plenty of research for the past two days, from attempting to delete the individual files within this folder via the Command Prompt, using Safe Mode, and many other options, yet nothing works. I've seen many forums advise using a program called "Unlocker," however, anyone googling the program will find that it is offered from a plethora of various sites, and I honestly dont trust programs from these sites.
Is there ANYTHING anyone knows to do for an issue like this? All I need is that one folder deleted, and all my problems are gone!

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

Unable to delete the list columns due to references - sharepoint 2010

Hello All,
I am unable to delete some list columns due to its reference. Actually I want to delete particular columns and create the same column name newly and I want to change the column type (calculated type) to single line text type
but unable to do the delete or modification due to following error, somebody please help me soon
and please see the snap for reference.
Error: Site columns which are included in content type cannot be deleted. Remove all the references to this site column prior to deleting this

Hello,
Is there any data in list? It seems there is content type in list, which is referring this column, that's why you are not able to delete it. Could you please verify. If column added in content type then delete column from content type.
Try this powershell to delete column:
http://peterheibrink.wordpress.com/2011/12/09/powershell-delete-field-and-all-references/
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Unable to delete file from trash because it's "in use" not locked.

I'm unable to delete a file from trash. I keep getting the following message: "The operation can’t be completed because the item is in use." I've confirmed the file isn't locked and I've tried renaming it but still no luck. I'm running OSX 10.8.4. Any thoughts?

Check the 'More Like This' discussions on the right hand column. I suspect you may find the answer there.
Ciao.

Unable to delete applet.....

Hi all,
I am unable to delete one applet which I have loaded in the card.
There are 2 applets, one is purse and other is loyalty. And am using shareable interface in which loyalty is the server and purse is the client. I can delete the purse applet but i can't delete the loyalty from the card.
Here is my code : There are in all 3 codes, one is purse, second is loyalty code and third is the shareable interface code. Can some one look at the code and tell me what's wrong in this programs.
package com.gemplus.examples.loyalty;
import javacard.framework.*;
import visa.openplatform.*;
public class Loyalty extends javacard.framework.Applet implements TestInterface
static byte points ;
protected Loyalty(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)(1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)(1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 4)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
// points = 0;
// register this instance
register(buffer, (short)(offset + 1), (byte)buffer[offset]);
* Method installing the applet.
* @param bArray the array constaining installation parameters
* @param bOffset the starting offset in bArray
* @param bLength the length in bytes of the data parameter in bArray
public static void install(byte[] bArray, short bOffset, byte bLength) throws ISOException
/* applet instance creation */
new Loyalty (bArray, bOffset, (byte)bLength);
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
/* return status of selection */
return true;
* Deselect method.
public void deselect()
return;
public void process(APDU apdu) throws ISOException
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
          ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
               apdu.setIncomingAndReceive();
          byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
          creditPoints((byte)0x00);
          apduBuffer[5] = (byte)(points >> 8) ;
          apduBuffer[6] = (byte)points ;
// sends the APDU response
// switches to output mode
          apdu.setOutgoing() ;
// 2 bytes to return
          apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
          apdu.sendBytes((short)5, (short)2) ;
     public void creditPoints(byte pTobeCredited)
points += pTobeCredited;
public Shareable getShareableInterfaceObject(AID client, byte param){
          if(param != (byte)0x00)
               return null;
     return (this);
second code is :
package com.gemplus.examples.oppurse;
* Imported packages
import javacard.framework.*;
import visa.openplatform.*;
import com.gemplus.examples.loyalty.*;
public class OPPurse extends javacard.framework.Applet
// the APDU constants for all the commands.
     private final static byte INS_GET_BALANCE = (byte)0x30 ;
     private final static byte INS_DEBIT      = (byte)0x31 ;
     private final static byte INS_CREDIT      = (byte)0x32 ;
     private final static byte INS_VERIFY_PIN = (byte)0x33 ;
     private final static byte INS_SET_NAME                    = (byte)0x34 ;
     private final static byte INS_GET_NAME                    = (byte)0x35 ;
// the OP/VOP specific instruction set for mutual authentication
     private final static byte CLA_INIT_UPDATE = (byte)0x80 ;
     private final static byte INS_INIT_UPDATE = (byte)0x50 ;
     private final static byte CLA_EXTERNAL_AUTHENTICATE = (byte)0x84 ;
     private final static byte INS_EXTERNAL_AUTHENTICATE = (byte)0x82 ;
// the PIN validity flag
private boolean validPIN = false;
// SW bytes for PIN Failed condition
     // the last nibble is replaced with the number of remaining tries
     private final static short      SW_PIN_FAILED = (short)0x63C0;
     private final static short SW_FAILED_TO_OBTAIN_SIO = (short)0x63D0;
     private final static short SW_LOYALTY_APP_NOT_EXIST = (short)0x63E0;
// the illegal amount value for the exceptions.
private final static short ILLEGAL_AMOUNT = 1;
// the maximum balance in this purse.
private static final short maximumBalance = 10000;
// the current balance in this purse.
private static short balance;
/*     byte[] loyaltyAID = new byte[]{ (byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,
          (byte)0x19,(byte)0xFF,(byte)0x00,(byte)0x00,
          (byte)0x00,(byte)0x00,(byte)0x00,(byte)0x00,
          (byte)0x00,(byte)0x00,(byte)0x02,(byte)0x02};*/
/* Security part of declarations */
// the Security Object necessary to credit the purse
private ProviderSecurityDomain securityObject = null;
// the security channel number
byte secureChannel = (byte)0xFF;
// the authentication status
private boolean authenticationDone = false;
// the secure channel status
private boolean channelOpened = false;
     private byte[] nameBuffer = new byte[6];
* Only this class's install method should create the applet object.
protected OPPurse(byte[] buffer, short offset, byte length)
// data offset is used for application specific parameter.
// initialization with default offset (AID offset).
short dataOffset = offset;
if(length > 9) {
// Install parameter detail. Compliant with OP 2.0.1.
// | size | content
// |------|---------------------------
// | 1 | [AID_Length]
// | 5-16 | [AID_Bytes]
// | 1 | [Privilege_Length]
// | 1-n | [Privilege_Bytes] (normally 1Byte)
// | 1 | [Application_Proprietary_Length]
// | 0-m | [Application_Proprietary_Bytes]
// shift to privilege offset
dataOffset += (short)( 1 + buffer[offset]);
// finally shift to Application specific offset
dataOffset += (short)( 1 + buffer[dataOffset]);
// checks wrong data length
if(buffer[dataOffset] != 2)
// return received proprietary data length in the reason
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + offset + length - dataOffset));
// go to proprietary data
dataOffset++;
} else {
// Install parameter compliant with OP 2.0.
if(length != 2)
ISOException.throwIt((short)(ISO7816.SW_WRONG_LENGTH + length));
          // retreive the balance value from the APDU buffer
short value = (short)(((buffer[(short)(dataOffset + 1)]) & 0xFF)
          | ((buffer[dataOffset] & 0xFF) << 8));
// checks initial balance value
if(value > maximumBalance)
ISOException.throwIt(ISO7816.SW_DATA_INVALID);
          // initializes the balance with the APDU buffer contents
balance = value;
// register this instance as an installed Applet
register();
// ask the system for the Security Object associated to the Applet
securityObject = OPSystem.getSecurityDomain();
// applet is personalized and its state can change
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
// build the new ATR historical bytes
byte[] newATRHistory = new byte[]
// put "OPPurse" in historical bytes.
(byte)0x4F, (byte)0x50, (byte)0x50, (byte)0x75, (byte)0x72, (byte)0x73, (byte)0x65
// !!! ACTIVATED IF INSTALL PRIVILEGE IS "Default Selected" (0x04). !!!
// change the default ATR to a personalized's one
OPSystem.setATRHistBytes(newATRHistory, (short)0, (byte)newATRHistory.length);
* Method installing the applet.
* @param installparam the array constaining installation parameters
* @param offset the starting offset in installparam
* @param length the length in bytes of the data parameter in installparam
public static void install(byte[] installparam, short offset, byte length )
throws ISOException
// applet instance creation with the initial balance
new OPPurse(installparam, offset, length );
* Select method returning true if applet selection is supported.
* @return boolean status of selection.
public boolean select()
validPIN = false;
// reset security if used.
// In case of reset deselect is not called
reset_security();
// return status of selection
return true;
* Deselect method.
public void deselect()
// reset security if used.
reset_security();
return;
* Method processing an incoming APDU.
* @see APDU
* @param apdu the incoming APDU
* @exception ISOException with the response bytes defined by ISO 7816-4
public void process(APDU apdu) throws ISOException
// get the APDU buffer
// the APDU data is available in 'apduBuffer'
byte[] apduBuffer = apdu.getBuffer();
// the "try" is mandatory because the debit method
// can throw a javacard.framework.UserException
try
     switch(apduBuffer[ISO7816.OFFSET_INS])
case INS_VERIFY_PIN :
     verifyPIN(apdu);
break ;
case INS_GET_BALANCE :
     getBalance(apdu) ;
break ;
case INS_DEBIT :
     debit(apdu) ;
break ;
                    case INS_SET_NAME :
                         setName(apdu);
                    break;
                    case INS_GET_NAME :
                         getName(apdu);
                    break ;
case INS_CREDIT :
     credit(apdu) ;
break ;
case INS_INIT_UPDATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_INIT_UPDATE)
// call initialize/update security method
     init_update(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case INS_EXTERNAL_AUTHENTICATE :
if(apduBuffer[ISO7816.OFFSET_CLA] == CLA_EXTERNAL_AUTHENTICATE)
// call external/authenticate security method
     external_authenticate(apdu) ;
else
// wrong CLA received
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
break ;
case ISO7816.INS_SELECT :
break ;
default :
// The INS code is not supported by the dispatcher
     ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED) ;
break ;
     }     // end of the switch
} // end of the try
          catch(UserException e)
// translates the UserException in an ISOException.
          if(e.getReason() == ILLEGAL_AMOUNT)
throw new ISOException ( ISO7816.SW_DATA_INVALID ) ;
//- P R I V A T E M E T H O D S -
     * Handles Verify Pin APDU.
     * @param apdu APDU object
     private void verifyPIN(APDU apdu)
// get APDU data
          apdu.setIncomingAndReceive();
// get APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// check that the PIN is not blocked
if(OPSystem.getTriesRemaining() == 0)
OPSystem.setCardContentState(OPSystem.APPLET_BLOCKED);
// Pin format for OP specification
// |type(2),length|nible(1),nible(2)|nible(3),nible(4)|...|nible(n-1),nible(n)|
// get Pin length
byte length = (byte)(apduBuffer[ISO7816.OFFSET_LC] & 0x0F);
// pad the PIN ASCII value
for(byte i=length; i<0x0E; i++)
// only low nibble of padding is used
apduBuffer[ISO7816.OFFSET_CDATA + i] = 0x3F;
// fill header TAG
apduBuffer[0] = (byte)((0x02 << 4) | length);
// parse ASCII Pin code
for(byte i=0; i<0x0E; i++)
// fill bytes with ASCII Pin nibbles
if((i & 0x01) == 0)
// high nibble
apduBuffer[(i >> 1)+1] = (byte)((apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F) << 4);
else
// low nibble
apduBuffer[(i >> 1)+1] |= (byte)(apduBuffer[ISO7816.OFFSET_CDATA + i] & 0x0F);
// verify the received PIN
// !!! WARNING PIN HAS TO BE INITIALIZED BEFORE USE !!!
if(OPSystem.verifyPin(apdu, (byte)0))
// set PIN validity flag
validPIN = true;
// if applet state is BLOCKED then restore previous state (PERSONALIZED)
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
OPSystem.setCardContentState(OPSystem.APPLET_PERSONALIZED);
return;
     // the last nibble of returned code is the number of remaining tries
          ISOException.throwIt((short)(SW_PIN_FAILED + OPSystem.getTriesRemaining()));
* Performs the "getBalance" operation on this counter.
* @param apdu The APDU to process.
private void getBalance( APDU apdu )
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
// writes the balance into the APDU buffer after the APDU command part
          apduBuffer[5] = (byte)(balance >> 8) ;
          apduBuffer[6] = (byte)balance ;
// sends the APDU response
// switches to output mode
          apdu.setOutgoing() ;
// 2 bytes to return
          apdu.setOutgoingLength((short)2) ;
// offset and length of bytes to return in the APDU buffer
          apdu.sendBytes((short)5, (short)2) ;
     private void setName(APDU apdu)
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
          // the operation is allowed only if master pin is validated
     if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
          byte[] apduBuffer = apdu.getBuffer();
          apdu.setIncomingAndReceive();
          for(short i=0,k=5;i<6;i++,k++)
               nameBuffer[i] = apduBuffer[k];
     }//end of setName
     private void getName(APDU apdu)
          // check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
               byte[] apduBuffer = apdu.getBuffer();
               for(short i=5, k=0;i<11;i++,k++)
                    apduBuffer=nameBuffer[k];
               apdu.setOutgoing();
               apdu.setOutgoingLength((short)6);
               apdu.sendBytes((short)5,(short)6);
     }//end of storeName
* Performs the "debit" operation on this counter.
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid.
* @exception UserException If the amount to debit is invalid.
private void debit(APDU apdu) throws ISOException, UserException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated
     if(!validPIN)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
     // Gets the length of bytes to recieved from the terminal and receives them
// If does not receive 4 bytes throws an ISO.SW_WRONG_LENGTH exception
          if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
          ISOException.throwIt(ISO7816.SW_WRONG_LENGTH) ;
          // Reads the debit amount from the APDU buffer
// Starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
          short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8 ) & (short)0x0000FF00));
// tests if the debit is valid
if((balance >= amount) && (amount > 0))
// does the debit operation
balance -= amount ;
// writes the new balance into the APDU buffer
// (writes after the debit amount in the APDU buffer)
apduBuffer[7] = (byte)(balance >> 8) ;
apduBuffer[8] = (byte)balance ;
// sends the APDU response
apdu.setOutgoing() ; // Switches to output mode
apdu.setOutgoingLength((short)2) ; // 2 bytes to return
// offset and length of bytes to return in the APDU buffer
apdu.sendBytes((short)7, (short)2) ;
          /*short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
          if(loyaltyID == null)
               ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
          TestInterface sio = (TestInterface)(JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00));
          if(sio == null)
               ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
          sio.creditPoints(points);*/
else
// throw a UserException with illegal amount as reason
throw new UserException(ILLEGAL_AMOUNT) ;
/* byte points = (byte)0x0A;
          //short points = 10;
AID loyaltyID = JCSystem.lookupAID(loyaltyAID, (short)0, (byte)loyaltyAID.length);
          if(loyaltyID == null)
               ISOException.throwIt((short)(SW_LOYALTY_APP_NOT_EXIST));
          TestInterface sio = (TestInterface)JCSystem.getAppletShareableInterfaceObject(loyaltyID, (byte)0x00);
          if(sio == null)
               ISOException.throwIt((short)(SW_FAILED_TO_OBTAIN_SIO));
          sio.creditPoints(points);*/
* Performs the "credit" operation on this counter. The operation is allowed only
* if master pin is validated
* @param apdu The APDU to process.
* @exception ISOException If the APDU is invalid or if the amount to credit
* is invalid.
private void credit(APDU apdu) throws ISOException
// check valid Applet state
if(OPSystem.getCardContentState() == OPSystem.APPLET_BLOCKED)
               ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
// the operation is allowed only if master pin is validated and authentication is done
     if (!validPIN || !authenticationDone)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// get the APDU buffer
byte[] apduBuffer = apdu.getBuffer();
          // gets the length of bytes to recieved from the terminal and receives them
// if does not receive 2 bytes throws an ISO.SW_WRONG_LENGTH exception
          if(apduBuffer[4] != 2 || apdu.setIncomingAndReceive() != 2)
throw new ISOException(ISO7816.SW_WRONG_LENGTH) ;
          // reads the credit amount from the APDU buffer
// starts at offset 5 in the APDU buffer since the 5 first bytes
// are used by the APDU command part
          short amount = (short)(((apduBuffer[6]) & (short)0x000000FF)
| ((apduBuffer[5] << 8) & (short)0x0000FF00));
// tests if the credit is valid
if(((short)(balance + amount) > maximumBalance) || (amount <= (short)0))
throw new ISOException(ISO7816.SW_DATA_INVALID) ;
else
// does the credit operation
balance += amount ;
* Performs the "init_update" security operation.
* @param apdu The APDU to process.
private void init_update( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
// close the openned security channel
try
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
try
// open a new security channel
secureChannel = securityObject.openSecureChannel(apdu);
// set the channel flag to open
channelOpened = true;
// get expected length
short expected = apdu.setOutgoing();
// send authentication result
// expected length forced to 0x1C
apdu.setOutgoingLength((byte)0x1C);
apdu.sendBytes(ISO7816.OFFSET_CDATA, (byte)0x1c);
catch(CardRuntimeException cre)
// no available channel or APDU is invalid
ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
* Performs the "external_authenticate" security operation.
* @param apdu The APDU to process.
private void external_authenticate( APDU apdu )
// receives data
apdu.setIncomingAndReceive();
// checks for existing active secure channel
if(channelOpened)
try
// try to authenticate the client
securityObject.verifyExternalAuthenticate(secureChannel, apdu);
// authentication succeed
authenticationDone = true;
catch(CardRuntimeException cre)
// authentication fails
// set authentication flag to fails
authenticationDone = false;
// close the openned security channel
try {
securityObject.closeSecureChannel(secureChannel);
} catch(CardRuntimeException cre2) {
// channel number is invalid. this case is ignored
// set the channel flag to close
channelOpened = false;
// send authentication result
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
// send authentication result
ISOException.throwIt(ISO7816.SW_NO_ERROR);
else
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
* The "reset_security" method close an opened secure channel if exist.
* @return void.
public void reset_security()
// close the secure channel if openned.
if(secureChannel != (byte)0xFF)
try
// close the openned security channel
securityObject.closeSecureChannel(secureChannel);
catch(CardRuntimeException cre2)
// channel number is invalid. this case is ignored
// reset security parameters
secureChannel = (byte)0xFF;
channelOpened = false;
authenticationDone = false;
return;
and the 3rd code is:
package com.gemplus.examples.loyalty;
import javacard.framework.Shareable;
public interface TestInterface extends Shareable
// public void creditPoints(byte points) ;
          public void creditPoints(byte points) ;
Thanks in advance......

Thanks. I know they are not the same thing. A package cannot be deleted if it contains one or more applets.
I tried to delete by typing in the applet AID first, but it just doesn't work. And of course it doesn't work for package AID.
Both the package and applet AID are generated in JBuilder, which looks like this, package AID(6D 79 70 61 63 6B 61 67 31),
applet AID(6D 79 70 61 63 30 30 30 31),
instance AID(6D 79 70 61 63 30 30 30 31)
I've tried those three AIDs, it's not working.
Thanks.

Unable to delete Address Book File

I am unable to delete nor copy over an Address Book file that I have on an external HD connected via Airport Extreme. When I connect the HD directly to my Macbook Pro, I am able to delete the file - but not via Airport Extreme. When I attempt to delete the file, I get a message from Trash as follows: The operation cannot be completed because the item "Metadata" is in use. Same message when I attempt to replace the file with a new file. In other words, I am unable to use AE to transfer my Address Book file to my external HD, unless I change the name of the file. What is going on here?

Hello Bob.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

BOBJ is unable to delete file from OFRS

System Info:
Business Objects Enterprise XI3.1 SP3 FP3.2
Windows 2003 Server Enterprise Edition SP3
Oracle 10.2
Java 1.6.0_20
APACHE Tomcat 5.5.20
2 clustered servers
FRS located on SAN Disk Drive connected to primary server (Winchester1)
We use WebIntelligence exclusivly.
We are receiving the following error in our event log on our clustered server:
Source: BusinessObjects_CMS
Category: General
Type: Warning
Event ID: 33018
Computer: Winchester2
Unable to delete file from the file repository. Make sure a File Repository Server is running and registered and enabled. Details : Failed to connect to the File Repository Server output. Make sure the server is up and running.
We have verified the FRS is running and we are able to connect to it from our clustered server (Winchester2). The security settings are set to full control for the admin group and the users have Read/Write access to the file store folders. The errors are filling up our event logs and causing issues with the servers. this appears to be happening each morning and the file it is trying to delete is an .xls file.
We have a ticket open with SAP Support but they are just as baffled as we are and keep sending us from one group to another and tell us they need to look at it on thier end and they will get back to us.
Has anyone had this happen on their system?

Hi Richard, did you ever get this issue resolved? We are having a similar issue on XI R3 SP4 using NAS/CIFS shares for our File Stores. We see this issue mainly after our servers are patched and a full environment restart is initiated. Like you, our event logs fill up with so many error messages I cannot pinpoint exactly when the issue starts happening.
Any help would be much appreciated.

Unable to delete a file

I'm unable to delete a a file from the filesystem.
String fileName = "dummy.xml"
boolean delete = (new File(fileName)).delete();It's not deleting this file from the filesystem.

Can anything else delete that file? Is the fileopen?
I don't know what you mean by can anything else
delete the file.I mean can you delete the file from the command line, a window, whatever. Is it just Java's delete that is having this problem or is it the file system?
No this is not opened/or use.How do you know?
DO I have to specify a path for this. Certainly. How else would Java know which file to delete?
If yes, please read on ........
the path where this xml file resides could by
anywhere in the file system. If it is how do I access
it since there is no specific location (it is left to
the user's choise to save the file anywhere he
wants)Keep the user's choice.

Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop

Hello,
We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
you'll need administrator permission to delete this file, with the prompt for administrator access.
They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
file.
I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.

Hello Bria,
What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
There are two GPO settings that could prevent the user from deleting his/her own items:
User
Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
Hide these specified drives in My Computer
Prevent access to specified drives in My
Computer
There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect.

Unable to delete songs from my iPad 2

Last night for the first time ever I had problems updating iOs (version 7.0.4) on my iPad 2. I kept getting one of several messages, for example, saying: iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. I went through the update three times before it finally worked.
Then I found that I had every song that I had ever purchased cluttering up -- and filling up -- my iPad. Although in the past I was able to delete either a single song or an entire album, I am now UNABLE TO DELETE ANY SONG.
I have the iTunes setting on Manual update and have attempted to completely disconnect the disgusting iCloud feature. However, it appears that iCloud is NOT disconnected.
I happily use the iPad 2 ONLY for a very few uses on a daily basis. I wish to control ALL my music from my iMac.
I've been with Apple since 1984, but I'm seriously thinking of ditching this iPad 2 for a Samsung product.
Any assistance will be appreciated.

Somehow I got 12 songs on my ipad mini that I could not remove.
I stumbled across a solution. Plug in the ipad and UN-check "sync music" to remove all but the remaining unwanted song. Find the song in your itunes library and right click these unwanted songs and RE-ADD it directly to the ipad.
The ipad should automatically re-check "sync music" and show one song being synced. Now manually UN-check the sync music box again and the warning will come up "are you sure...existing songs...removed". Select remove and click the "apply" button in itunes. Once the changes are applied, you should see the song remove itself from your ipad.
Good luck!

Unable to delete files from powerpoint

I just installed MS office for iPad. I am experiencing an annoying problem with Powerpoint. When I download and open a file from OneDrive, oftentimes I am subsequently unable to delete it from within the iPad powerpoint program. I get a message that the file cannot be deleted because it is in use. I am able to delete the file from OneDrive on my computer no problem, but it remains on the iPad. Clearing the file cache from settings does not do the trick. I have to uninstall and reinstall powerpoint to get rid of the undeletable files. Am I missing something here? Thanks.

I just installed MS office for iPad. I am experiencing an annoying problem with Powerpoint. When I download and open a file from OneDrive, oftentimes I am subsequently unable to delete it from within the iPad powerpoint program. I get a message that the file cannot be deleted because it is in use. I am able to delete the file from OneDrive on my computer no problem, but it remains on the iPad. Clearing the file cache from settings does not do the trick. I have to uninstall and reinstall powerpoint to get rid of the undeletable files. Am I missing something here? Thanks.

Unable to delete files from encrypted external SD Card using File Commander

I've run into some trouble trying to delete the directory com.spotify.music from my external SD Card (encrypted) after a hard reboot using the reset button next to the sim card.
I need to do this for the Spotify app to work (FC on starting it) and I'm currently unable to delete the folder and its contents from Sony provided file explorer(FC File Commander).
Is there a way to delete this app from adb or other command line tool or how should I go about this? Developer options are enabled because I'm learning to develop apps. Not particularly keen on rooting or otherwise format my SD Card but it's an option if there are no other ways to do it.
I can see the contents of my card using File Commander just fine. Spotify app is uninstalled, I tried remove cache and data before uninstall also.

Thommo wrote:
Are you able to delete files via your Pc or are you able to remove the card from your phone and connect it to a Pc for file deletion - There is a free program called Unlocker currently on version 1.9.2 which is excellent at deleting files that don't want to be deleted - You would install the program then right click the file and choose Unlocker and then when the program starts choose delete
I guess he will not be able to move the SD card to the computer since it's encrypted and is working only with that particular device, but he should be able to access it via PC.
If you can try to uninstall Spotify from your phone. I assume Spotify is not working due to some rubbish inside it's directory, but on the other hand you can't delete the folder because it may be used by Spotify. If you uninstall app folder may be unlocked.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

Unable to delete file on NW6.5 sp8.

I'm unable to delete a file on a NW6.5 sp8 server.
This is only a copy, so it's not mission critical, but it's starting to frustrate the hell out of me!
A colleague was given a helpdesk problem about a misbehaving pdf, he made a copy of the pdf in a different directory to do some testing but now finds that he cannot delete this copy!
I've tried deleting it using Windows Explorer, Dos, Filer.Exe, Console One, and possibly one or 2 others. I get various errors but they all seem to infer that either I'm using a user who doesn't have the necessary rights (I'm using our standard admin user, so that shouldn't be the problem) or that the file is in use by others. Using the JRBUtil 'Openfile.exe', I find that the file is being used by 4 instances of my admin user.
If I try and disconnect these instanceswith 'Openfile.exe', I get confirmation that the connections have been terminated, but I'm still not able to delete the file. If I go back to 'Openfile.exe' it tells me that the same 4 connections (same connection numbers throughout) are still in use! If I try to close the connections using the Console Monitor then it appears to close the connections, they disappear from the list and if I re-check then they are still not visible, but if I go back to 'Openfile.exe' then it reports that the connections are still current! I've tried using iManage to close the connections, but with no success!
The server in question is our main data server so the chances of rebooting it just because it 'may' fix this problem is unlikely to happen.
Again it's only a copy and not mission critical, but it would be good to find an answer to this. So, is there a command or utility that will just delete a file when asked?
Many thanks
Ian.

Originally Posted by dgersic
On Tue, 27 Sep 2011 10:56:02 +0000,
If the server thinks the file is open / locked, you will not be able to
delete it without resolving that first. You could try dismounting the
volume, which should force the OS to close the file.
David
I think that it is this open / locked issue that is causing the problem. The idea of dismounting the volume sounds like a less brutal version of my original idea of having to reboot the server to clear the connections.
However, as I said to Tom above, I've got to try and get this past the server admin, and as this is only a copy on our main data server which is in constant use, I'm not sure that I'll get permission to try this. Unfortunately I think that I may have to accept that I'll have to wait until the server is taken down for a more important reason. Frustrating, but that's life.
So, thanks to all who replied and for the suggestions. I'll certainly log them for future use, so if nothing else this has been a good learning experience for me.
Ian
(Now I've just got to work out how to close this thread!)

Unable to delete newly CIFed resources

Similar Messages

Maybe you are looking for