Unable to delete PSA request

Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,

Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran

Similar Messages

  • Unable to delete bad request in ODS DATA TARGET

    Hi Experts,
    I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
    Please tell me how to delete request in red.

    Hi,
    Try to do the following:-
    1. Note that bad  request number
    2. Go to SE16
    3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
    4. Open table RSICCONT. There will be one entry for that request . Delete that entry
    5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request  depending on number of data packages in  that request .Delete all those entries
    Once these entries are deleted , the bad request will be automatically deleted from the ODS.
    Regards,
    Satya

  • Unable to Delete the request in ODS

    HI Friends,
          I am facing the problem with deleting request in ODS.
              I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
        it is showing the message request is already activated;no further QM action possible.
           My system is upgraded by BI 7.0 one week before only. Please give me solution .
    I am waiting for your reply.
    Thanks & Regards,
    Guna.

    Hi,
    Are there other activated requests on top of this requests?
    In that case it wont let you delete this request unless those requests are also deleted.
    Try to change the status to red and delete.
    Else try this.
    Delete requests manually from the ODS tables.
    1. tcode se16.
    2. delete the request in these tables : RSICCONT (delete activated requests OR
    Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
    request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
    The request will be removed from your ODS.
    Note 947481 - P32:ODS: Deleting partially active non-condensed requests 
    Hope this helps.
    Thanks,
    JituK

  • Error while deleting PSA Request Manually

    Hi Experts,
    I am trying to delete Older PSA Request, but it is throwing an Error "Internal Error occured during Authorization Check"....
    Also, when i tried to see the Monitor, it is not showing any records anything...Its showing as no logs found...
    I have used the Function Module "RSAR_PSA_CLEANUP_DIRECTORY_MS", but it is not working.
    Can anybody suggest if there is any solution to delete PSA Request?
    Regards,
    Anuja

    I don't believe this has anything to do with Crystal Reports. Please post in the SAP classic forums.
    Don

  • Problem in Delete PSA Request

    Hello Guys,
    I have come across a strange behavior of Delete PSA Request variant in Process Chains. When I am trying to delete PSA through Process Chain, I could delete PSA of all datasources except 0CO_OM_WBS_1.
    I tried it through different combinations, but could not delete data in 0CO_OM_WBS_1 through Process Chain. Can anyone help me through this, or any valid explanations on this front.
    Thanks,
    Saurabh

    Hi saurabh,
      It seems that you have some inconsistent requests in your PSA. Try running the program RSAR_PSA_CLEANUP_DIRECTORY/_MS and give your PSA technical name there which can be easliy found out once you click on the manage tab of you PSA at the top.
    Just put that technical name & run the program in repair mode. One the program is success full, your chain should be able to delete the requests there after.
    Check the Below thread, on how to delete the inconsistent requests from PSA.
    Finding out the details of the user who deleted a PSA request manually
    hope that the info helps you.
    Thanks

  • Delete PSA Request

    Hi Experts,
    1. I need to delete PSA request(50 request) in BI 7.0  production system.
    2. Also need to include the process type 'deletion of PSA request' to the existing process chain.
    Pls provide me the steps to follow to perform the above activities.
    Regards,
    Anand

    Hi,
    I found this answer for deleting the psa request.
    1.      Select the DataSource that you want to delete requests from the PSA for and choose Manage.
           2.      On the next screen, select one or more requests from the list and choose  Delete Request from DB.
           3.      When asked whether you want to delete the request(s), confirm.
    The system deletes the requests from the PSA table.
    You can also delete requests in DataSource maintenance. Choose Goto ®   Manage PSA (pushbutton). Follow the instructions above, starting from step 2.
    Can i follow the same in production. Pls confirm.
    Regards,
    Anand.

  • Master Data -- unable to delete the request

    I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
    I am trying to QM status Green Manually it is giving the message “QM action not allowed for DTP requests in master data and Text Tables “.
    I am unable to delete the request also, when I am trying to delete it is saying
    <b>Error:</b>
    Data inconsistency; Partition /BIC/B0000959000 not deleted
    Message no. RSAR026
    <b>Diagnosis</b>
    In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
    <b>System Response</b>
    The system outputs an error when deleting the partition.
    <b>Procedure&</b>
    Check the table for data consistency.
    <b>Error:</b>
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      177'
    Message no. RSSTATMAN102

    Hi,
    I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
    You can try the following OSS note for a start
    SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
    I've also found a very recent one:
    SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Unable to delete DSO request.

    Hi Everyone,
    We have Real time Data Acquisition (RDA) implemented in our system. Yesterday RDA failed due to invalid characters. We corrected data at PSA level and tried to run repair process chain, the request is not deleting with a
    diagnosis message "Insertion of a data record into the active table failed. The data record already existed. This indicates manual changes to the database table".
    Could somebody help in what way we can delete this request and load the corrected request. Any suggestion is highly appreciated.
    Regards,
    Shashidhar.

    Hi Everyone,
    Thanks a lot for your valuable suggestions.
    Atlast the request was deleted successfully. I have following request related information to update to all of you.
    Apart from the standard tables mentioned, viz., RSICCONT, RSMONICDP and RSODSACTREQ, . There is an other table RSBKREQUEST. This table contains the details of DTP requests.
    Even after deleting from other tables mentioned before, we have to set the status field of the table RSBKREQUEST to "DELETED". Ours was in "INCORRECT" status, this was the reason because of which it was unable to run repair process chain, even after DTP request was removed from Infoprovider Administration.
    So please note above table, which in very important for DTP requests and first 3 tables are enough only incase DTP is not involved and only infopackage is used to load to data target (3.x version).
    Regards,
    Shashidhar.

  • Unable to delete transport request

    Hi Team,
    The Standalone sandbox with ECC 6.0
    Im deleting the transport request , getting error unable to delete the tranport request
    Cannot open log:
    hostname\sapmnt\trans\log\CC000036.SID.
    Kinldy assist me in solving the issue .
    Regards
    Kumar

    Hi,
    Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
    Check if the file
    hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
    Regards,
    Srikishan

  • Urgen t- unable to deleted a request in ODS

    Hi All,
    I am trying to delete a request in ODS but the request is appearing again.
    tried all the possible way. Can anybody help.
    Thanks in advance
    Narendra

    Hi
    If you wanted to delete the request any way, then
    Now you can try to delete the same requests from the tables RSICCONT.
    you have to modify the request no. from the table "RSMDATASTATE"(Request SID for which all requests are technically o.k.), RSBODSLOGSTATE (PSA ID )and RSODSACTREQ(Request ID and ODS activation ID).
    Thanks,
    Teja

  • Delete PSA request from ODS

    Hello Guys,
    I need to know how can I delete the PSA request number generated when request is activated
    This request is type:  ODSR_*
    I need to delete this request in order to activate again the data of my ODS reuqest ID, because a problem the activation terminated unsuccessfully, and know I see the request in red, and with the request for reporting available.
    I want to delete it, because if I activate the request again, there is going to consume more space in my table space of ODSD.
    thanks in advance

    Ok, thanks for your help.
    One more question.
    The first activation failed, and when I saw the table space for ODSD, it decreased for about 1GB, my question is, if I reactivate the request, is going to consume another 1GB for the table space???
    Thats why I want to first delete the PSA request that generates when activated data, in order to recover that space that was consume in the first failed activation.

  • Process Chain - Unable to delete overlapping request

    Hi Gurus
    I'm in the mid of creating process chain to load transaction data  in which I need to delete the previous load that loaded in using the same DTP previously
    In the process chain , i have included a process "Delete Overlapping Request from Infocube" . Once i'm in the screen of maintain variant for this process, i selected DTP as the object type but unable to find the DTP that i have created under the object name.
    Can someone point out what is missing
    Thank you

    Hi,
    Looks like you need to give the the techincal name of the DTP. if you are un able to find the technical name of the DTP you can find that in the transport organizer.
    just drag and drop the infoprovider ( with dataflow before) you will ge the DTP as required.
    note the technical name of the DTP .
    include the technical name in the process and activate the process.
    Santosh

  • Unable to delete PSA data through process chain.

    Hi Everyone,
    I have got a problem in PSA deletion. We have got few PSA and change log deletion jobs which run at daily or fortnight basis. We planned to add few PSA tables to each daily and fortnight jobs depending on requirement.
    We added in development and could see jobs deleting PSAs properly. Now on transporting to testing, we could see that PSA tables are not being deleted and there is no change in data. We have checked the PSA table names properly, in table RSTSODS and confirmed PSA is given properly only.
    Anyone faced this problem or have idea about this issue, please let us know and suggest us.
    Thanks and regards,
    Shashidhar.

    Hi Shashidhar
    Just check for the PSA requests as below:
    Go to PSA in RSA1/ RSA1OLD -
    > Select the PSA -
    > Settings -> Display selection for PSA tree -> give start date and end date or any other selecetions as per your requirement-> it will show you all the details.
    Hope this helps.
    Cheers
    Chanda

  • Issue in deleting PSA request in the backend table.

    All
    We have been facing this strange issue with PSA - Ideally, when we delete a  request in the PSA, the contents of the respective back end table also get deleted. However, in case of one of the PSAs, if we delete the contents of the PSA, the same is not reflected in the backend table. As of today, the PSA is empty but the back end table has around 1 mn records. Looks like it has appended all the requests that we have loaded so far and not deleted the earlier entries.
    Any help on this issue will be appreciated. Thanks.
    Regards
    Niranjana

    In continuation it all depends on the SP you are ,i presume you are above SP>10 so below should not be an issue for you.
    When you try to delete requests from the PSA that were loaded into the PSA using an old 3.X DataSource and the DataSource has been convertes into a new NW2004S DataSource in the meantime, you cannot delete the requests properly.
    The administration information is deleted, but the data remains in the PSA table
    Note 983618 - P10:PSA: Deleting requests after converting old DS to new DS
    Hope it Helps
    Chetan
    @CP..

  • Unable to delete the request from ODS

    Hi All,
    I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the  request is not deleting.
    I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
    Thanks in advance for your reply

    Hi Prem,
    If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
    Also check this thread as well
    Request unable to delete from ODS.
    Regards,
    R.Ravi

Maybe you are looking for