Unable to delete the bad request,and also not activated.
Hi,
I am having ods1 existing in process chain,it is exporting 4ods.At the 3 ods the request was failed at datatarget level,but in RSMO status shows as green only.
For all the ODSes the data has runned for two days,on first day the request was failed,if i am going to activate or delete its not accepting.plz help me in this issue.update type for that ODS is deltaupdate..
Thanks & Regards,
Aswini.
Hi Ashwini,
In your case, the data was loaded successfully, but the activation got failed.
to confirm that, check the number of records loaded as below.
No. of records loaded.
No. of records available in "New Data Table"
If the data load is successful and there are '0' records in new data table, you can turn the QM status to green and then activate the data.
If still there are records in New Data Table, The failure might be because of the table space problem. Check the short dumps in ST22. You may find a runtime error called "DBIF_RSQL_SQL_ERROR". You'll see a message "Unable to extend table". You can notify this runtime error to Basis team and they can help you out.
If it's not the table space problem, you can delete the request by turning the QM status to red in RSMO/Data target (though it is already red, turn it to red again) .
let me know the source system where you are getting the data from. I can suggest you whether to delete the data.
Regards,
Shashi
Similar Messages
-
Delete the bad request from ODS.
Hi,
i am tring to delete the bad request form ods object but i am unable to delete the request from ods. i am using full uplaod and the processing is "psa and datatarget in parllel. when i check the data in PSA, it is giving "No data packet numbers could be determi request REQU_5SMPS3MTHYJHHUYQ62AM61H89".
Thanks in advance,
Kasi.Hi KAsi,
I had a similar issue few weeks back, look in SM50 and chk if there are any processes still running which might lock the object. Also chk in st22 to see if any dumps are created under your login. If tehre are any processes - you can try to cancel them or ask Basis to help u with it.
*I guess* - when you hit delete, the delete icon appears but is not able to lock(enqueue) the object and after sometime the delteion program cannot move forward and hence it returns to original status.
regards
Poonam -
Unable to delete the last request in full load infopackage
Hi All,
I have full load infopackage with many requests with green status and thier request genetaed is 0.
Because of last failure request ia m aunable to activate dso.
i Made last failure request green and triggered. but not successful.
i made it red and tried deleting, no sucess. when i delete its giving Dump
Now i am unable to delete the first request in green status also.its not deleting.
can i delete whole data in dso and do full load again? how to check if there any other infopackages on this dso..
ALL This issues camw across triggering process chian...plz let me know oyur answers....
Thanks,
VenkatHi Venkatesh,
I tried deleting through RSODSACTREQ.. but the delete option was disabled in the TABLE ENTRY TAB.
The last request is failed one with red and not tranfered with full records..
All the other records which are in green status does not have symbol genated for reporting purpose and
Request id generated up on activation is zero..
I tried deleting the first request.. when i change its satus to red...
QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
The M version is then activated if necessary Now?
Req. 0001439786 in DataStore Z[DSONAME]must have QM
status green before it is activated
Request 0001427251 is not completely activated.
Please activate it again.
But i am unable to find both the requests under psa and in adminstartion data target tab... there are some other requests with red status iin psa...
When i try to delete failed request its giving dump
Thanks,
Venkat. -
Unable to delete the DTP request.
Hi friends, iam unable to delete the DTP request, its showing in yellow mode, iam unable to change it to green or red, i checked in SM50 and SM51 ...is there any other way to delte the request ....any FM .
My version is 7.0 and SP16 BI_Content 9.
Thanks in advance,Hi,
Try this.
RSBKDATAPAKID DTP: Status Table for Data Packages.
Check this table if you can change the status to red.
If yes - than delete all the requests from manage screen.
Also check table RSBKREQUEST DTP to delete Request if possible.
Hope this helps.
Thanks,
JituK -
Can i delete the Previous request and create the new request for loading
Dear Experts,
I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
Here my question is the first day load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
Please guide me .
Regards,
Srinivasan.Hi Srinivasan,
I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
Hope it helps!
Regards,
Pavan -
Unable to Delete the Transport Request running since a long time - urgent
Hi all
I had a transport request of a DSO , which is running since a long time.
I had deleted it from STMS , & also from the tables TPSTAT, TRJOB, TRBAT; TMSTLOCKR;TMSTLOCKP
But still the entry is shown running
& because of this all my tranport work is pending , & not moving,
Can anyone help me out.
Regards,
rameshHi
1. There are no more entries in TRBAT.
2. I have deleted the RDSEXCEL jobs also
3. I have restarted the Server as well. & tried to manually buffer the requests to the queue.
But still whevner i refresh the Import MOnitor, it gets hanged.
How do i unlock the queue ? -
I am trying to burn music to a CD-R- message says: unable to locate the original file. Music is on the iTunes program but will not play or burn. Is there something I should change to be able to burn to CD?
If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library -
Firefox and Yahoo suddenly, for me, stopped working insofar as being able to open my mail.
I removed Firefox from my system and re-loaded it. Same problem.Hmmmm, http://www.seattlepi.com/ loads fine hear in 10.4.11, FF 3.6.8, but I do see it uses some kind of Flash.
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs: http://get.adobe.com/shockwave/
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/ -
How to delete the compressed Request ID in the info cube... ?
Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh -
Every time I sign in, it signs me out immediately. I've tried deleting the opm file and it's unable to do so because "Adobe CC is currently running this file." I've also changed my LAN settings and downloaded something else that was supposed to help me out but nothing seems to fix the problem.
I think you'll find that the official Adobe advice here is misguided. First, deleting bits of the program and program data is, as you've noted, perilous and often impossible. Shame on Adobe for doing such a poor job of coding that such steps are needed.
The solution I recommend is as follows:
Restart your Windows machine and boot in "Safe Mode" with networking using the F8 key just as Windows starts.
Go to the Control Panel and select Programs. Find and Uninstall "Adobe Creative Cloud Desktop".
Reinstall it by downloading it from the website https://creative.adobe.com/products/creative-cloud
Restart your machine.
Only in "Safe Mode" are you likely to be able to accomplish these tasks reliably. -
Unable to Delete the request in ODS
HI Friends,
I am facing the problem with deleting request in ODS.
I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
it is showing the message request is already activated;no further QM action possible.
My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK -
Unable to delete the file. (Some times deletes and sometime fails to delet)
Please help me in deleting the file from the temporary location .
Below is my code
//Append the session is with filename as there is possibility of having same name of file.
try{
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
if (isMultipart)
// Create a factory for disk-based file items
factory = new DiskFileItemFactory();
// Create a new file upload handler
upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
if(strInputFileName.lastIndexOf("\\")== -1)
strInputFileName = (String)mPropBag.get("TempUploadDirM") + strInputFileName;
}else
strInputFileName = (String)mPropBag.get("TempUploadDir") + strInputFileName.substring(strInputFileName.lastIndexOf("\\"));
strInputFileName = strInputFileName + "_" + request.getSession().getId();
uploadedFile = new File(strInputFileName);
item.write(uploadedFile); //// I am Writing the file in this location appened with the session Id because there might //be a possibility of having same name of file.
catch(......)
finally
uploadedFile.delete();
uploadedFile = null;
upload = null;
}I am unable to delete the file from the temporary location
some times it is deleting and some times it is not deleting.. I have also tried ...deleteOnExit();Make sure you've got no other processes holding onto it (Windows Explorer, for instance) and that you've closed any streams involved with the file. If that fails, try calling System.gc() just before deleting the file. This is a workaround for a bug in certain JVMs on Windows machines
-
Master Data -- unable to delete the request
I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
I am trying to QM status Green Manually it is giving the message QM action not allowed for DTP requests in master data and Text Tables .
I am unable to delete the request also, when I am trying to delete it is saying
<b>Error:</b>
Data inconsistency; Partition /BIC/B0000959000 not deleted
Message no. RSAR026
<b>Diagnosis</b>
In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
<b>System Response</b>
The system outputs an error when deleting the partition.
<b>Procedure&</b>
Check the table for data consistency.
<b>Error:</b>
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 177'
Message no. RSSTATMAN102Hi,
I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
You can try the following OSS note for a start
SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
I've also found a very recent one:
SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
hope this helps...
Olivier.
Message was edited by:
Olivier Cora -
Unable to delete the request from ODS
Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your replyHi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi -
My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.
My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.
Maybe you are looking for
-
I am trying to use system center to manage my Azure enviorment
I am freaking lost!!!! I have a Widows Azure environment that i'm trying to manage using system center ( apparently this is the bee's knees cause every post is about it) So I attempt to install Microsoft System Center and I got something now on a 201
-
I cannot get itunes 10 to download onto my laptop tonight.
Hi guys and Girls. I got a new iPhone 4S today and need to sync it with my Dell laptop. iTunes tells me it needs to update to version 10 and although I have tried many times tonight I can't get it to download either from the update button in iTunes o
-
Using ExcelExport without opening the dialog box to select all the channels in portal by default
Hi, I need to export all the data in the Data portal to an Excel file without opening the Dialog for channels selection. In the ExcelExport command, it asks for a Config (*.stp) file as one of the parameters. Is there need to create a new stp fil
-
Reader XI vanishes in IE10/11 after download link click on HTML
All, We facing an issue with IE10/11 and Latest release of Adobe Reader. We are showing the PDF on an HTML page inside a iframe and then have download links outside of this, this was working fine until updates to IE and Reader occurred and now after
-
Since up grading, will not open, respond but says it's running
I upgrded to the new version. Browser will not open, will not respond or anything. I have done all the steps in your help menus but nothing works. I have to use internet explorer to get on line. Nothing happens with Firefox