Unable to delete the request from ODS

Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the  request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your reply

Hi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi

Similar Messages

  • Unable to Delete the request in ODS

    HI Friends,
          I am facing the problem with deleting request in ODS.
              I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
        it is showing the message request is already activated;no further QM action possible.
           My system is upgraded by BI 7.0 one week before only. Please give me solution .
    I am waiting for your reply.
    Thanks & Regards,
    Guna.

    Hi,
    Are there other activated requests on top of this requests?
    In that case it wont let you delete this request unless those requests are also deleted.
    Try to change the status to red and delete.
    Else try this.
    Delete requests manually from the ODS tables.
    1. tcode se16.
    2. delete the request in these tables : RSICCONT (delete activated requests OR
    Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
    request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
    The request will be removed from your ODS.
    Note 947481 - P32:ODS: Deleting partially active non-condensed requests 
    Hope this helps.
    Thanks,
    JituK

  • Problem in deleting the request from ODS......

    Hi,
    I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
    Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
    Can some body let me know how to STOP/DELETE the old request??  I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
    Thanks Jeetu

    Hi Jeetu,
    Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
    Hope there will be large volume of data !
    Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
    I too faced the same issue but i am helpless i could not stop the data load inthe middle!
    If you found any solution for this let me also know
    Thanks
    Ram

  • Deactivate delta update before deleting the request from ODS

    Hi all,
    Happy New Year wishes to all.
    I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
          I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
    “Request 98888 already retrieved by data target BWVCLNT”
    “Delta update in data target BWVCLNT must be deactivate before deleting the request
    “Do you want to deactivate the delta update in data target BWVCLNT?
    So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
    “Delta request is incorrect REQXXXXXXX in the monitor”
    “A repeat needs to be requested”
    “Data target still include delta request REQXXXXX”
    “If the repeat is now loaded, then after the load”
    “There could be duplicate data in the data targets”
    “Request the repeat?”
    After execute changes it is showing only “zero” Records only.
    What is that mean and why zero records it is displaying instead of delta records.
    Anybody faces this type of problem please let me know. This is somewhat urgent to me
    Thanks and Regards
    Satish Chowdary

    <i>Hi Satish,
    First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
    I hope this helps.
    Thanks,
    Krish
    Dont Forget to assign Points.</i>
    Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

  • Not able to delete the data from ODS

    Hi All,
    I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS,  out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
    As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
    Can you give any clue to delete the remaining 2 requests.
    Thanks,

    Hi kavitha,
    Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
    and try to delete the request.
    are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
    Regards
    Prashanth K

  • To delete a request from ODS

    Hello all,
    I am not able to delete the request from ODS .
    It gives the error message :no request found in the change log.
    how shlould i delete the request??
    thnx in advance.
    Regards,
    Dhanya.

    Hello,
    thnx sriram n balaji!
    i checked my infosource through the prgm:RSAR_PSA_CLEANUP_DIRECTORY
    the following message appears in the display log:
    PSA: 8ZFIADS11_CA
    Version 000 technical name /BIC/B0000043000
    Partition 0003
    Request Ratio:[Deleted:Total]->1 :2
    Records Ratio:[Deleted:Total]->753943 :1507886 ,50 % logically deleted
    Partition 0004
    Request Ratio:[Deleted:Total]->0 :1
    Records Ratio:[Deleted:Total]->0 :753943 ,0 % logically deleted
    what should i infer from this ?
    can anyone please tell me the step by step procedure to delete the request.
    Regards,
    Dhanya.

  • Selective deletion of request from ODS which is activated and updated

    Hi all,
    I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated  and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
    Many thanks in advance,
    BRB

    Hi
    Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
    You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
    If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
    As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
    This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
    Regards,
    H.J.

  • Unable to delete the Requests in the data target---Process chain

    Hello Gurus!
                          Can anyone plz help me out knowing this issue...
      <b>Let me explain the whole scenario:</b>
    Like when monitoring the process chains,one of the process chainhas a  sequence of variants like:
    load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
    due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
    so....when i looked into the datatarget ODS1->manage->requests.
    <b>i found that the info-pack1 requests status was RED.
    info-pack2 requests status was YELLOW.
    info-pack3 requests status was RED</b>.
    ALL THE THREE R FULL UPDATES ONLY.
    so suddenly one of our cologue  deleted the all the three requests by making ino-pack2 requests to red.
    when we r loading again the ino-pack1  again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
    i hope that all understand the scenario..plz suggest me how to work on it
    Thanks in advance!!!
    Dilip

    Hi,
    Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
    Regards
    Sankar

  • Unable to delete the request id in ODS....indicating partially activated

    Dear All,
    When I tried deleting a request from ODS, am unable to turn the QM status to red, itz indicating that the request is partially activated.  When I tried deleting the request without changing the status, the delete icon is popped up, but eventually goes back to the previous status and hence does not get deleted.
    Due to the above, the subsequent requests coming into the ODS are not getting activated at all...
    I tried running the function module  RSBM_GUI_CHANGE_USTATE, to delete the request, but to no success.  Similarly, when I tried locating the requests in the four tables RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ, could not found the request id to be deleted in any of these 4 tables.
    Please suggest some solution as it is of high importance...
    Thanks and Regards,
    Edited by: sachitp on Feb 27, 2011 12:25 PM

    Hi,
    You can try the below options,
    1. Remove the request data from the active table using the function
    to delete data selectively.
    You must enter selection criterion to select the data of the
    aborted request.
    2. Use Transaction SE37 to execute the 'RSAR_ODS_API_DEL' function
    module as follows:
    I_REQUEST <Name of the activation request>
    I_DATE <current date>
    3. Use Transaction SE16 to delete all entries for this request and
    for this ODS object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE
    and RSODSACTREQ tables.
    Thanks,
    Vinod

  • Unable to delete bad request in ODS DATA TARGET

    Hi Experts,
    I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
    Please tell me how to delete request in red.

    Hi,
    Try to do the following:-
    1. Note that bad  request number
    2. Go to SE16
    3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
    4. Open table RSICCONT. There will be one entry for that request . Delete that entry
    5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request  depending on number of data packages in  that request .Delete all those entries
    Once these entries are deleted , the bad request will be automatically deleted from the ODS.
    Regards,
    Satya

  • Need to delete a request from ODS

    HI
    i need to delete a request from ODS Full update,It failed.I forced it to activate for testing and the request turned green.But iam not able to delete the request now as the job log says it has incorrect status and now not able to change the QM action of Request as it has already been activated.Now how do i delete this request.
    Thanks
    RAJ

    Hai,
    I think your request has been partially activated so you are not able to delete the request.
    If u really need that request to be deleted then see that there sholud not be any request above that one.
    Try to make the request red in manage screen and it will pop up a window which is having start no and cancel click no
    and then try to delete the request.
    If not need that request make the qm status red and leave it the data will be available for reporting.
    Regards.
    Vikram Singh

  • Can we delete particular request from ODS

    Hi All,
    Can't we delete particular request from ODS?
    there are dozen of successful requests in ODS, when i deleted one successful request from the middle, all the subsequent requests lost the tick which indicates they are updated to cube. Is there any way that i can undo this one?
    can we do selective request(successful) deletion from ODS?
    Thanks in advance.
    Robyn.

    Hi Samara,
    what i was trying to do is re-arranging the requests according to chronological order, which are not in. imagine the scenario
    ODS requests      cube request
    5         ->             E
    4         ->             D
    2         ->             B
    3         ->             C      
    1         ->              A
    what iam trying to do is put them in sequence
    ODS request        cube request
    5                           E
    4                           D
    3                           C
    2                           B
    1                           A
    If i delete 3rd ODS request put it over 2 it won't accept as the request number is lesser than that of 2nd request.
    can we reconstruct any request from reconstruction tab or just the latest request?
    How does this effect the data which is already updated to cube from ODS?
    Regards,
    Robyn.
    Message was edited by:
            Robyn Hoggard
    Message was edited by:
            Robyn Hoggard

  • Unable to delete a request from a Cube which is loaded by Open hub to flat

    Hi,
    We have one Cube from which we are transferring data to a flat file by open hub.
    the DTP for the OPEN HUB is delta DTP.
    Now when i am trying to delete a request from Cube its not allowing me.
    Its giving error as request is already updated to the target so delete the request from target first.
    I tried deleting the open hub request entry from RSBKREQUEST table.
    but still its not deleting the request from the Cube.
    Can you please help me in solving this problem.
    Thanks in Advance,

    I think request is having datamart, which is not allowing it to delete.
    You can try to reset (delete)  the datamart by clicking on it in cube request and then try to delete.
    Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also.

  • Master Data -- unable to delete the request

    I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
    I am trying to QM status Green Manually it is giving the message “QM action not allowed for DTP requests in master data and Text Tables “.
    I am unable to delete the request also, when I am trying to delete it is saying
    <b>Error:</b>
    Data inconsistency; Partition /BIC/B0000959000 not deleted
    Message no. RSAR026
    <b>Diagnosis</b>
    In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
    <b>System Response</b>
    The system outputs an error when deleting the partition.
    <b>Procedure&</b>
    Check the table for data consistency.
    <b>Error:</b>
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      177'
    Message no. RSSTATMAN102

    Hi,
    I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
    You can try the following OSS note for a start
    SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
    I've also found a very recent one:
    SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Can we delete the requests from Infoobject master data

    Hello all,
    we load master data process chains everyday. now when when we right click on the attribute "Manage" then there are lots of requests there.
    Can we delete the older requests from there?
    Does having lot of requests there slow down the performance?
    Thanks in advance

    Ravi,
    Yes we have transactional data also loaded. So you mean I cannot delete the requests from Infoobject ?
    So can we use the given FM and delete master data lets says once a week ?
    I am really confused about this. I tried deleting some of the request from ATTR (Right click on attr and then manage -> select request and delete) and it did actually get deleted so was that wrong thing to do ?
    Thanks for reply

Maybe you are looking for