Unable to Delete the request in ODS

HI Friends,
      I am facing the problem with deleting request in ODS.
          I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
    it is showing the message request is already activated;no further QM action possible.
       My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.

Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Similar Messages

Unable to delete the request from ODS

Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your reply

Hi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Master Data -- unable to delete the request

I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
I am trying to QM status Green Manually it is giving the message QM action not allowed for DTP requests in master data and Text Tables .
I am unable to delete the request also, when I am trying to delete it is saying
Error:
Data inconsistency; Partition /BIC/B0000959000 not deleted
Message no. RSAR026
Diagnosis
In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
System Response
The system outputs an error when deleting the partition.
Procedure&
Check the table for data consistency.
Error:
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 177'
Message no. RSSTATMAN102

Hi,
I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
You can try the following OSS note for a start
SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
I've also found a very recent one:
SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Unable to delete the Requests in the data target---Process chain

Hello Gurus!
Can anyone plz help me out knowing this issue...
Let me explain the whole scenario:
Like when monitoring the process chains,one of the process chainhas a sequence of variants like:
load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
so....when i looked into the datatarget ODS1->manage->requests.
i found that the info-pack1 requests status was RED.
info-pack2 requests status was YELLOW.
info-pack3 requests status was RED.
ALL THE THREE R FULL UPDATES ONLY.
so suddenly one of our cologue deleted the all the three requests by making ino-pack2 requests to red.
when we r loading again the ino-pack1 again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
i hope that all understand the scenario..plz suggest me how to work on it
Thanks in advance!!!
Dilip

Hi,
Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
Regards
Sankar

Unable to delete the request id in ODS....indicating partially activated

Dear All,
When I tried deleting a request from ODS, am unable to turn the QM status to red, itz indicating that the request is partially activated. When I tried deleting the request without changing the status, the delete icon is popped up, but eventually goes back to the previous status and hence does not get deleted.
Due to the above, the subsequent requests coming into the ODS are not getting activated at all...
I tried running the function module RSBM_GUI_CHANGE_USTATE, to delete the request, but to no success. Similarly, when I tried locating the requests in the four tables RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ, could not found the request id to be deleted in any of these 4 tables.
Please suggest some solution as it is of high importance...
Thanks and Regards,
Edited by: sachitp on Feb 27, 2011 12:25 PM

Hi,
You can try the below options,
1. Remove the request data from the active table using the function
to delete data selectively.
You must enter selection criterion to select the data of the
aborted request.
2. Use Transaction SE37 to execute the 'RSAR_ODS_API_DEL' function
module as follows:
I_REQUEST <Name of the activation request>
I_DATE <current date>
3. Use Transaction SE16 to delete all entries for this request and
for this ODS object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE
and RSODSACTREQ tables.
Thanks,
Vinod

Urgen t- unable to deleted a request in ODS

Hi All,
I am trying to delete a request in ODS but the request is appearing again.
tried all the possible way. Can anybody help.
Thanks in advance
Narendra

Hi
If you wanted to delete the request any way, then
Now you can try to delete the same requests from the tables RSICCONT.
you have to modify the request no. from the table "RSMDATASTATE"(Request SID for which all requests are technically o.k.), RSBODSLOGSTATE (PSA ID )and RSODSACTREQ(Request ID and ODS activation ID).
Thanks,
Teja

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Unable to delete the request through process chain

Hi,
We included program in a info package to delete the request based on snapshot date. its working fine when we ran info package manually but its not working when the infopackage is included in the process chain.
Kindly update us how to work on this.
Thanks & regards
Bharathi

Hi Bharathi,
There are two options in delete request process of chain:
one is to use deletion seletion from Infocube .....infopackage settings
and second one is to set new in chain....
you should try first option...
Thanks
Arun Purohit

Unable to delete the request Id

When I tried to delete one Request Id, I got the following messages:
Previous request (ID 1924) has status 'red'
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '     175'
I just installed SP10, why can I delete this request? And where can I find "Previous rquest (ID 1924)? It's not there.

Can you please check the code in SE37 for this function module ..with the OSS note corrections...
I have pasted the corrections of OSS note
FUNCTION RSS2_DTP_RNR_SUBSEQ_PROC_SET
Delta 001Context Block
function rss2_dtp_rnr_subseq_proc_set.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(I_SID) TYPE RSSID
*"     REFERENCE(I_TSTATE) TYPE RSBKTSTATE
*"     REFERENCE(I_S_MSG) TYPE RSPC_S_MSG OPTIONAL
Delete Block
data: l_r_dtp_rnr type ref to cl_rsbk_request.
data: l_tstate    type rsbktstate.
data: l_ustate    type rsbktstate.
data l_r_error    type ref to cx_rs_static_check.
Insert Block
*" EXPORTING
*"     REFERENCE(E_T_MSG) TYPE RS_T_MSG
*" EXCEPTIONS
*"      ERROR
data: l_r_dtp_rnr type ref to cl_rsbk_request.
data: l_tstate    type rsbktstate.
data: l_ustate    type rsbktstate.
data: l_r_error   type ref to cx_rs_static_check.
data: l_s_msg     type rs_s_msg.
data: l_line      type i.
refresh e_t_msg.
do 1 times.
Delta 002Context Block
      call method cl_rsbk_request=>create_from_db
        exporting
          i_requid    = i_sid
        receiving
          r_r_request = l_r_dtp_rnr.
    catch cx_rs_not_found into l_r_error.
Delete Block
      message l_r_error type 'S'.
      message x000.
Insert Block
       message l_r_error type 'S'.
       message x000.
        l_line = 34.
        exit.
Delta 003Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_ustate_red
                exporting
                  i_no_commit = rs_c_true.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
               message l_r_error type 'X'.
                l_line = 69.
                exit.
Delta 004Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_tstate
                exporting
                  i_tstate    = rsbc_c_tstate-further
                  i_no_commit = rs_c_true
                  i_s_msg     = i_s_msg.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
                  message l_r_error type 'X'.
                l_line = 85.
                exit.
Delta 005Context Block
            call method l_r_dtp_rnr->if_rsbk_request~set_tstate
              exporting
                i_tstate    = rsbc_c_tstate-deleting
                i_no_commit = rs_c_true.
          catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
            message l_r_error type 'X'.
Insert Block
                message l_r_error type 'X'.
              l_line = 99.
              exit.
Delta 006Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_tstate
                exporting
                  i_tstate    = rsbc_c_tstate-further
                  i_no_commit = rs_c_true
                  i_s_msg     = i_s_msg.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
                  message l_r_error type 'X'.
                l_line = 130.
                exit.
Delta 007Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_ustate_red
                exporting
                  i_no_commit = rs_c_true.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
                  message l_r_error type 'X'.
                l_line = 146.
                exit.
Delta 008Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_tstate
                exporting
                  i_tstate    = rsbc_c_tstate-deleting
                  i_no_commit = rs_c_true.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
                  message l_r_error type 'X'.
                l_line = 161.
                exit.
Delta 009Context Block
            call method l_r_dtp_rnr->if_rsbk_request~set_tstate
              exporting
                i_tstate    = rsbc_c_tstate-deleted
                i_no_commit = rs_c_true.
          catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
            message l_r_error type 'X'.
Insert Block
                message l_r_error type 'X'.
              l_line = 175.
              exit.
Delta 010Context Block
            call method l_r_dtp_rnr->if_rsbk_request~set_tstate
              exporting
                i_tstate    = rsbc_c_tstate-further_start
                i_no_commit = rs_c_true.
          catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
            message l_r_error type 'X'.
Insert Block
                message l_r_error type 'X'.
              l_line = 197.
              exit.
Delta 011Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_tstate
                exporting
                  i_tstate    = rsbc_c_tstate-further_start
                  i_no_commit = rs_c_true.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
             data l_x.
             while l_x is initial.
             endwhile.
              message l_r_error type 'X'.
Insert Block
                  data l_x.
                  while l_x is initial.
                  endwhile.
                  message l_r_error type 'X'.
                l_line = 223.
                exit.
Delta 012Context Block
            call method l_r_dtp_rnr->if_rsbk_request~set_tstate
              exporting
                i_tstate    = rsbc_c_tstate-further
                i_no_commit = rs_c_true
                i_s_msg     = i_s_msg.
          catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
           data l_x1.
           while l_x1 is initial.
           endwhile.
            message l_r_error type 'X'.
Insert Block
                data l_x1.
                while l_x1 is initial.
                endwhile.
                message l_r_error type 'X'.
              l_line = 241.
              exit.
Delta 013Context Block
              call method l_r_dtp_rnr->if_rsbk_request~set_tstate
                exporting
                  i_tstate    = rsbc_c_tstate-further_start
                  i_no_commit = rs_c_true.
            catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
              message l_r_error type 'X'.
Insert Block
                  message l_r_error type 'X'.
                l_line = 264.
                exit.
Delta 014Context Block
            call method l_r_dtp_rnr->if_rsbk_request~set_tstate
              exporting
                i_tstate    = rsbc_c_tstate-further_error
                i_no_commit = rs_c_true
                i_s_msg     = i_s_msg.
          catch cx_rs_foreign_lock cx_rs_failed into l_r_error.
Delete Block
            message l_r_error type 'X'.
Insert Block
                message l_r_error type 'X'.
              l_line = 279.
              exit.
Delta 015Context Block
      endif.
    when others.
      message x000.
endcase.
Delete Block
Insert Block
    exit.
enddo.
if l_r_error is bound.
    call function 'RS_EXCEPTION_TO_MESSAGE'
      exporting
        i_r_exception = l_r_error
      changing
        c_t_msg       = e_t_msg.
    l_s_msg-msgid = 'RSSTATMAN'.
    l_s_msg-msgno = 102.
    l_s_msg-msgty = 'E'.
    l_s_msg-msgv1 = 'RSS2_DTP_RNR_SUBSEQ_PROC_SET'.
    data: l_char(10) type c.
    l_char = l_line.
    l_s_msg-msgv2 = l_char.
    append l_s_msg to e_t_msg.
    data: l_on type sy-batch.
    call function 'RSSM_RFC_IS_GUI_ON'
      importing
        on = l_on.
    if l_on = 'Y'.
      call function 'RSDC_SHOW_MESSAGES_POPUP'
        exporting
          i_t_msg                 = e_t_msg
          i_txt                   = text-012
        I_WITH_S_ON_EMPTY       = RS_C_TRUE
        I_ONE_MSG_DIRECT        = RS_C_TRUE
        I_ONE_MSG_TYPE_S        = RS_C_TRUE
      IMPORTING
        E_S_EXIT_COMMAND        =
    endif.
    raise error.
    exit.
endif.

Not able to delete the data from ODS

Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,

Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K

How to delete the requests in DTP?

hi all,
here i am unable to delete the requests in DTP...
when i am going to delete the request in DTP it simply showing the error:
*cannot lock request DTPR_488BDVJVHQPUUTT3R383DJ55Q OF TABLE 0MATERIAL for deletion*
could you plz help me on this.....

Hi Kiran,
Please go through this thread. Here the same problem has been discussed it detail.
/message/4419400#4419400 [original link is broken]
Following are the steps mentioned in this thread
1. RSA1 -->Info provider >0Material>Right Click-->Display
2. One screen will come , Select the monitor icon to view that (not the one when you go with Manage of 0Material_attr).
3. In the monitor screen you will see Refresh icon , Refresh that
screen , Now the status will change , after 2 -3 refreshes you
will see the request turning to red.
4. Now go back to the manage tab of the 0Material attribute , You
can delete now.
Regards,
Praveen

Unable to delete PSA request

Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,

Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran

To delete a request from ODS

Hello all,
I am not able to delete the request from ODS .
It gives the error message :no request found in the change log.
how shlould i delete the request??
thnx in advance.
Regards,
Dhanya.

Hello,
thnx sriram n balaji!
i checked my infosource through the prgm:RSAR_PSA_CLEANUP_DIRECTORY
the following message appears in the display log:
PSA: 8ZFIADS11_CA
Version 000 technical name /BIC/B0000043000
Partition 0003
Request Ratio:[Deleted:Total]->1 :2
Records Ratio:[Deleted:Total]->753943 :1507886 ,50 % logically deleted
Partition 0004
Request Ratio:[Deleted:Total]->0 :1
Records Ratio:[Deleted:Total]->0 :753943 ,0 % logically deleted
what should i infer from this ?
can anyone please tell me the step by step procedure to delete the request.
Regards,
Dhanya.

Unable to Delete the request in ODS

Similar Messages

Maybe you are looking for