Unable to Delete the Transport Request running since a long time - urgent

Hi all
I had a transport request of a DSO , which is running since a long time.
I had deleted it from STMS , & also from the tables TPSTAT, TRJOB, TRBAT; TMSTLOCKR;TMSTLOCKP
But still the entry is shown running
& because of this all my tranport work is pending , & not moving,
Can anyone help me out.
Regards,
ramesh

Hi
1. There are no more entries in TRBAT.
2. I have deleted the RDSEXCEL jobs also
3. I have restarted the Server as well. & tried to manually buffer the requests to the queue.
But still whevner i refresh the Import MOnitor, it gets hanged.
How do i unlock the queue ?

Similar Messages

Unable to delete the last request in full load infopackage

Hi All,
I have full load infopackage with many requests with green status and thier request genetaed is 0.
Because of last failure request ia m aunable to activate dso.
i Made last failure request green and triggered. but not successful.
i made it red and tried deleting, no sucess. when i delete its giving Dump
Now i am unable to delete the first request in green status also.its not deleting.
can i delete whole data in dso and do full load again? how to check if there any other infopackages on this dso..
ALL This issues camw across triggering process chian...plz let me know oyur answers....
Thanks,
Venkat

Hi Venkatesh,
I tried deleting through RSODSACTREQ.. but the delete option was disabled in the TABLE ENTRY TAB.
The last request is failed one with red and not tranfered with full records..
All the other records which are in green status does not have symbol genated for reporting purpose and
Request id generated up on activation is zero..
I tried deleting the first request.. when i change its satus to red...
QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
The M version is then activated if necessary Now?
Req. 0001439786 in DataStore Z[DSONAME]must have QM
status green before it is activated
Request 0001427251 is not completely activated.
Please activate it again.
But i am unable to find both the requests under psa and in adminstartion data target tab... there are some other requests with red status iin psa...
When i try to delete failed request its giving dump
Thanks,
Venkat.

To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

Unable to delete the DTP request.

Hi friends, iam unable to delete the DTP request, its showing in yellow mode, iam unable to change it to green or red, i checked in SM50 and SM51 ...is there any other way to delte the request ....any FM .
My version is 7.0 and SP16 BI_Content 9.
Thanks in advance,

Hi,
Try this.
RSBKDATAPAKID DTP: Status Table for Data Packages.
Check this table if you can change the status to red.
If yes - than delete all the requests from manage screen.
Also check table RSBKREQUEST DTP to delete Request if possible.
Hope this helps.
Thanks,
JituK

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

Unable to delete the bad request,and also not activated.

Hi,
I am having ods1 existing in process chain,it is exporting 4ods.At the 3 ods the request was failed at datatarget level,but in RSMO status shows as green only.
For all the ODSes the data has runned for two days,on first day the request was failed,if i am going to activate or delete its not accepting.plz help me in this issue.update type for that ODS is deltaupdate..
Thanks & Regards,
Aswini.

Hi Ashwini,
In your case, the data was loaded successfully, but the activation got failed.
to confirm that, check the number of records loaded as below.
No. of records loaded.
No. of records available in "New Data Table"
If the data load is successful and there are '0' records in new data table, you can turn the QM status to green and then activate the data.
If still there are records in New Data Table, The failure might be because of the table space problem. Check the short dumps in ST22. You may find a runtime error called "DBIF_RSQL_SQL_ERROR". You'll see a message "Unable to extend table". You can notify this runtime error to Basis team and they can help you out.
If it's not the table space problem, you can delete the request by turning the QM status to red in RSMO/Data target (though it is already red, turn it to red again) .
let me know the source system where you are getting the data from. I can suggest you whether to delete the data.
Regards,
Shashi

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

Delete the transport request Objects already transported

Hi,
I have a request which contains two function grps ( 'Z') , along with it function modules (Z) and related objects ( Z data elements, Z Classes, Z table types and Z table structures).
By mistake this request is transported from System1 to system2.
How can i delete them in system2. One way is manual, but guess some problems could occur in it.
Is there any other easier way.
Thnx.

Hello
You have two options to achieve your goal:
1.a) Create a new transport request (system 1) and include all objects that have been imported into system 2. Release this request as backup for restoring the objects in system 1.
1.b) Delete all objects on system 1 (creates a new request), release the request and import these DELETE entries into system 2.
1.c) Re-import the first request (1.a) into system 1 to restore the deleted object.
2.) Change the source system of the objects imported into system 2 to this system 2. Then you can easily delete these objects in system 2.
NOTE: Approach (1.) is only feasible if you do not have too many cross-references to the deleted objects.
Regards
Uwe

Problem in deleting the transport request number

Hi All,
I have created a TR for a program.When i made an attempt to delete the TR(not yet released) using the Tcode se10 its displaying a message saying that the request cant be deleted as it contains the locked objects.Could anybody guide me in this regard.
Thanks & Regards,
Kishore

Hi,
go to se01
and click display
see the object the request contains and delete the
object it contains and try deleting it.
Regards,
V.Balaji
Reward if Usefull...

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

Re-transport the transport request to NQA server after system refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

Amar,
Depending on how many tarnsports you have and also if this is one time, what you can do is ask Basis guys to write a small script which adds to the buffer to your NQA system.
Steps:
1) under /usr/sap/trans/buffer rename the NQA buffer file.
2) create a new empty file NQA (make sure permissions are identical)
3) Provide the list of transports and ask Basis team to put it in a file at Unix level
4) Run a script which will add to the buffer from the source file.
5) From STMS refresh the NQA queue and you should see all the transports ready for import.
Hope this helps.
Thanks,
Naveed
Edited by: Naveed Qureshi on Dec 4, 2008 8:52 AM

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

How to delete the entries from the transport request

i need to delete the entries programatically from the transport request for all the entries which is exists in the package for the tables e070 and e071.

Hi,
I think you need to have authorization for that thru auth group SA.
One more thing is where ever its created like source client only you can do if u have authorization.
Regds
Sivaparvathi
Please reward points if helpful...

Unable to Delete the request in ODS

HI Friends,
      I am facing the problem with deleting request in ODS.
          I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
    it is showing the message request is already activated;no further QM action possible.
       My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.

Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Unable to Delete the Transport Request running since a long time - urgent

Similar Messages

Maybe you are looking for