Unable to Detach Database in a Compiled Project - Labview 7.1

We have recently left our customer, running a compiled version Labview 7.1 project. Since running the compiled project he cannot perform his Historical Data Back-up. The following error is reported:
"This operation cannot be completed because the resource is in use by another Client
Archive 09Sep08 (archive name) - Failed to detach associated relational database"
Any guidance and advice would be greatly appreciated

Hello Neil,
I have had a look at other instances where we have come across a similar issue. Here is some information that I found:
Microsoft's ActiveX Data Objects (ADO) are used for accessing data sources. They provide a means of accessing data stores. Although your program runs quite quickly, there must be an ADO connection in the background still running, and the connection does not get closed until some timeout occurs within ADO so that you can have access.
The short-term workaround might be to wait an extra minute or so before detaching the database in your code.
I hope that this will help,
Please do let me know how it goes,
Kind Regards,
Michael S.
Applications Engineer
NI UK & Ireland

Similar Messages

Project Error: Open project was canceled or RoboHelp was unable to load database

Hi,
I checked an HTMLHelp project out of SourceOff Site (SOS),
then attempted to open it locally with RoboHelp 5 when I got the
error message: "Open project was cancelled or RoboHelp was unable
to load database."
I found the TechNote for this error message (rb_3245) which
said to delete the .xpj and .cpd files, then right-click the HHP
file and click Edit to open the project. This worked fine for
opening the project, however the Primary Layout Source defaulted to
WebHelp. I reset the Primary Layout Source to HTMLHelp which caused
all of the graphics in the project to not display. I fixed this
issue, compiled the Help, and all appeared to be fixed. I checked
the project back into SOS to back it up. This morning, I checked it
out of SOS and tried to open the project locally again, only to get
the same error. I closed the project, undid the check-out, and
asked another writer to check-out the project then open it locally
to see if he got the same error. He did not get the error.
I am not sure what could be wrong on my computer that is
causing this error. I had no problems opening and using this
project until yesterday and I made no file name or path changes to
the project. Any ideas on what may be wrong?

Welcome to the forum.
The message is usually easily dealt with. I haven't checked
the article as you didn't include a link but I'm guessing it
involved deleting a couple of files and then using the HHP file to
open the project.
What is more worrying is that you cannot create a new
project.
Have you tried opening one of the supplied sample files?
Are your projects stored locally and not on a network?
Have IT given you a new profile to log on with?
Has anything else changed in your environment?

Open project was canceled or RoboHelp was unable to load database

I have Robohelp 2002r2 and am creating Robohelp HTML help.
The project was ok yesterday but today when I try to open it I get
the error message "Open project was canceled or RoboHelp was unable
to load database". I tried the solutions in the knowledgebase
(rb_3245) but still no luck. I can't even create a new project
either or I get the same message. Anybody know what to
do????

Welcome to the forum.
The message is usually easily dealt with. I haven't checked
the article as you didn't include a link but I'm guessing it
involved deleting a couple of files and then using the HHP file to
open the project.
What is more worrying is that you cannot create a new
project.
Have you tried opening one of the supplied sample files?
Are your projects stored locally and not on a network?
Have IT given you a new profile to log on with?
Has anything else changed in your environment?

"open project was cancelled or the application was unable to load database for..."

I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?

There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up?

Open project was cancelled or application was unable to load database for pathname

My pc is installed with Robohelp 3x. Recently I shifted the
pc from one room to anther. Now when I attempt to open my existing
workable solution, it give me the following message: "Open project
was canceled or application was unable to load database for
<pathname>". Do I need to call for Robohelp technical
support? If yes, can someone provide me the toll free number?
Can someone pls advise?

Thanks Peter, managed to get in through the link you've
given. I seriously doubt it has anything gotta do with a corrupted
project. I have 2 working projects last week but they can no longer
be opened this week.
I tried even to created an empty project from scratch. It was
created successfully but when I reopen the project, it shows the
same error message.
Could there have been other possibilities or ways which I can
troubleshoot?
*puzzled*

Unable to load database connector - using JRC w/report connecting to Oracle

A simple Java program was created to test a Crystal Report using JRC. The Java program is a thick-client Swing desktop application (modified from an example of crxi_r2_migrating_rdc_to_jrc.pdf). The program failed to execute the report with the following error:
Unable to load database connector u2018com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'
It might be something simple to correct the problem, but I am not able to find related answers in the documentation and from the forum.
CR version is XI R2. The Java program was compiled and run using jdk1.4.2_13. Oracle is 10.2.
Do I have to use JDBC? or the CR Oracle driver will do? What needs to be setup? If I use JDBC, what do I need to setup (I tried to following the links in the forums or other documentation, but most of the links to http://support.businessobjects.com/.... are broken - i.e. re-route to the SAP support page but not directly linked to the articles)
When the report JRCTestReport.rpt was saved with the option "Save Data With Report", it works fine. So the problem is only with Oracle database driver, the other jars are fine.
In the report JRCTestReport.rpt the database properties are:
 DatabaseDLL crdb_oralce.dll
 Password
 Server myTestDB
 Trusted_Connection False
 User ID MyUser
The crdb_oracle.dll is located at:
C:\Program Files\Business Objects\Common\3.5\bin
Files are stored in the following tree structure:
<Testing Folder>
 JRCTest.java
 JRCTest.class
 WEB-INF
 lib
 All required JRC jars and CRConfig.xml
 Reports
 JRCTestReport.rpt
Java source code JRCTest.java
import java.awt.*;
import javax.swing.*;
import java.io.*;
import com.crystaldecisions.ReportViewer.*;
// Use this for talking to JRC in-process
import com.crystaldecisions.reports.sdk.*;
import com.crystaldecisions.sdk.occa.report.reportsource.*;
public class JRCTest
 private static void createAndShowGUI()
 try
 //Make sure we have nice window decorations.
 JFrame.setDefaultLookAndFeelDecorated(false);
 //Create and set up the window.
 JFrame frame = new JFrame("JRCTest");
 frame.setTitle("JRCTest");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 ReportViewerBean viewer = new ReportViewerBean();
 System.out.println("ReportViewerBean.init");
 viewer.init(new String[0], null, null, null);
 System.out.println("new ReportClientDocument");
 ReportClientDocument rpt = new ReportClientDocument();
 try
 System.out.println("Openning Report...");
 rpt.open("JRCTestReport.rpt", 0);
 catch (Exception ex)
 System.out.println("Failed to open report");
 System.out.println(ex.toString());
 return;
 try
 System.out.println("logon...");
 rpt.getDatabaseController().logon("myUser", "myPass");
 catch (Exception ex)
 System.out.println("Failed to logon");
 System.out.println(ex.toString());
 return;
 System.out.println("ReportClientDocument.getReportSource");
 IReportSource rptSource = rpt.getReportSource();
 viewer.setReportSource(rptSource);
 System.out.println("viewer.setReportSource");
 frame.getContentPane().add
 (viewer, BorderLayout.CENTER);
 frame.setSize(700, 500);
 frame.setVisible(true);
 viewer.start();
 catch (Exception exception)
 System.out.println(exception.toString());
 public static void main(String[] args)
 javax.swing.SwingUtilities.invokeLater(new Runnable()
 public void run()
 createAndShowGUI();
Execution result:
C:\tmp\CrystalJavaTest>java -classpath .;./WEB-INF/lib;./WEB-INF/lib/ReportViewe
r.jar;./WEB-INF/lib/jrcerom.jar;./WEB-INF/lib/jrcadapter.jar;./WEB-INF/lib/Concu
rrent.jar;./WEB-INF/lib/CrystalCharting.jar;./WEB-INF/lib/CrystalCommon.jar;./WE
B-INF/lib/CrystalContentModels.jar;./WEB-INF/lib/CrystalExporters.jar;./WEB-INF/
lib/CrystalExportingBase.jar;./WEB-INF/lib/CrystalFormulas.jar;./WEB-INF/lib/Cry
stalQueryEngine.jar;./WEB-INF/lib/CrystalReportEngine.jar;./WEB-INF/lib/CrystalR
eportingCommon.jar;./WEB-INF/lib/icu4j.jar;./WEB-INF/lib/keycodeDecoder.jar;./WE
B-INF/lib/log4j.jar;./WEB-INF/lib/MetafileRenderer.jar;./WEB-INF/lib/rasapp.jar;
./WEB-INF/lib/rascore.jar;./WEB-INF/lib/rpoifs.jar;./WEB-INF/lib/Serialization.j
ar;./WEB-INF/lib/URIUtil.jar;./WEB-INF/lib/xercesImpl.jar;./WEB-INF/lib/xml-apis
.jar JRCTest
Starting
Crystal Report Viewer 2.1.21.2
java.vendor = Sun Microsystems Inc.
java.version = 1.4.2_13
os.name = Windows XP
os.version = 5.1
os.arch = x86
ReportViewerBean.init
new ReportClientDocument
Openning Report...
logon...
ReportClientDocument.getReportSource
viewer.setReportSource
ERROR - JRCAgent1 detected an exception: Unable to load database connector 'com.
crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwRepo
rtSDKException(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unkno
wn Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unkno
wn Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage
(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource
.getPage(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReport
Source.getPage(Unknown Source)
 at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source
 at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
 at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
 at java.lang.Thread.run(Thread.java:534)
Unable to load database connector 'com.crystaldecisions.reports.queryengine.driv
erImpl.DriverLoader'.

After I switched the report to use JDBC, I am still getting the same error.
Machine has multiple jdk, oracle 10g, Oracle11g client installed though. So I need to set my path to use the jdk from Crystal Report and Oracle 10g.
The program was compiled and ran with the following path and CLASSPATH:
set path="C:\Program Files\Business Objects\j2sdk1.4.2_08\bin";"C:\Program Files\Business Objects\j2sdk1.4.2_08\jre\bin";"C:\Program Files\Business Objects\j2sdk1.4.2_08\jre\bin\client";c:\oracle\ora102\bin
set CLASSPATH=.;./WEB-INF/lib;./WEB-INF/lib/ReportViewer.jar;./WEB-INF/lib/jrcerom.jar;./WEB-INF/lib/jrcadapter.jar;./WEB-INF/lib/Concurrent.jar;./WEB-INF/lib/CrystalCharting.jar;./WEB-INF/lib/CrystalCommon.jar;./WEB-INF/lib/CrystalContentModels.jar;./WEB-INF/lib/CrystalExporters.jar;./WEB-INF/lib/CrystalExportingBase.jar;./WEB-INF/lib/CrystalFormulas.jar;./WEB-INF/lib/CrystalQueryEngine.jar;./WEB-INF/lib/CrystalReportEngine.jar;./WEB-INF/lib/CrystalReportingCommon.jar;./WEB-INF/lib/icu4j.jar;./WEB-INF/lib/keycodeDecoder.jar;./WEB-INF/lib/log4j.jar;./WEB-INF/lib/MetafileRenderer.jar;./WEB-INF/lib/rasapp.jar;./WEB-INF/lib/rascore.jar;./WEB-INF/lib/rpoifs.jar;./WEB-INF/lib/Serialization.jar;./WEB-INF/lib/URIUtil.jar;./WEB-INF/lib/xercesImpl.jar;./WEB-INF/lib/xml-apis.jar;C:/oracle/ora102/jdbc/lib/ojdbc14.jar
I modified my java testing program to display more info:
Modified program:
import java.awt.*;
import javax.swing.*;
import java.io.*;
import com.crystaldecisions.ReportViewer.*;
// Use this for talking to JRC in-process
import com.crystaldecisions.reports.sdk.*;
import com.crystaldecisions.sdk.occa.report.reportsource.*;
import com.crystaldecisions.sdk.occa.report.exportoptions.*;
import com.crystaldecisions.sdk.occa.report.data.*;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
public class JRCTest2
 private static void createAndShowGUI()
 try
 System.out.println("Starting");
 //Make sure we have nice window decorations.
 JFrame.setDefaultLookAndFeelDecorated(false);
 //Create and set up the window.
 JFrame frame = new JFrame("JRCTest2");
 frame.setTitle("Testing 1, 2, 3");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 System.out.println("new ReportViewerBean");
 ReportViewerBean viewer = new ReportViewerBean();
 System.out.println("ReportViewerBean.init");
 viewer.init(new String[0], null, null, null);
 System.out.println("new ReportClientDocument");
 ReportClientDocument rpt = new ReportClientDocument();
 try
 System.out.println("Openning Report...");
 rpt.open("JRCTestReport.rpt", 0);
 catch (Exception ex)
 System.out.println("Failed to open report");
 System.out.println(ex.toString());
 return;
 try
 // try logon here to see if any exceptions
 rpt.getDatabaseController().logon("myUser", "myPass");
 catch (Exception ex)
 System.out.println("Failed to logon");
 System.out.println(ex.toString());
 return;
 IDatabase idb = rpt.getDatabaseController().getDatabase();
 Tables dtb = idb.getTables();
 IConnectionInfo conInfo = dtb.getTable(0).getConnectionInfo();
 PropertyBag attrs = conInfo.getAttributes();
 conInfo.setPassword("myPass");
 conInfo.setUserName("myUser");
 IStrings s = attrs.getPropertyIDs();
 for (int i=0; i < s.size(); i++)
 System.out.println(s.getString(i));
 System.out.println(attrs.getStringValue(s.getString(i)));
 System.out.println(" ");
 conInfo.setAttributes(attrs);
 attrs = conInfo.getAttributes();
 s = attrs.getPropertyIDs();
 // Print property again after setting attributes
 for (int i=0; i < s.size(); i++)
 System.out.println(s.getString(i));
 System.out.println(attrs.getStringValue(s.getString(i)));
 System.out.println(" ");
 System.out.println("ReportClientDocument.getReportSource");
 IReportSource rptSource = rpt.getReportSource();
 viewer.setReportSource(rptSource);
 frame.getContentPane().add
 (viewer, BorderLayout.CENTER);
 frame.setSize(700, 500);
 frame.setVisible(true);
 viewer.start();
 catch (Exception exception)
 System.out.println(exception.toString());
 public static void main(String[] args)
 System.out.println("main");
 javax.swing.SwingUtilities.invokeLater(new Runnable()
 public void run()
 createAndShowGUI();
Running result:
C:\tmp\CrystalJavaTest>java JRCTest2
main
Starting
new ReportViewerBean
Crystal Report Viewer 2.1.21.2
java.vendor = Sun Microsystems Inc.
java.version = 1.4.2_13
os.name = Windows XP
os.version = 5.1
os.arch = x86
ReportViewerBean.init
new ReportClientDocument
Openning Report...
Trusted_Connection
false
Server Name
dbHost
Connection String
Use JDBC=b(true);Connection URL=s(jdbc:oracle:thin:@dbHost:1521:myDB);Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(dbHost);User ID=s(myUser);Password=;Trusted_Connection=b(false);JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB)
Server Type
JDBC (JNDI)
Database Class Name
oracle.jdbc.OracleDriver
Use JDBC
true
URI
!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB
Database DLL
crdb_jdbc.dll
Trusted_Connection
false
Server Name
dbHost
Connection String
Use JDBC=b(true);Connection URL=s(jdbc:oracle:thin:@dbHost:1521:myDB);Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(dbHost);User ID=s(myUser);Password=;Trusted_Connection=b(false);JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB)
Server Type
JDBC (JNDI)
Database Class Name
oracle.jdbc.OracleDriver
Use JDBC
true
URI
!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB
Database DLL
crdb_jdbc.dll
ReportClientDocument.getReportSource
ERROR - JRCAgent1 detected an exception: Unable to load database connector 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
 at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source)
 at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
 at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
 at java.lang.Thread.run(Thread.java:534)
Unable to load database connector 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
Also got similar error when the path and classpath was switched to Oracle 11g.
Is there a way to tell which file that it failed to load?
Thanks
Kin

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Application was unable to load database

I have a RoboHelp 9 project that I left open on my computer overnight and microsoft updates ran causing my computer to restart. When I try to open my RoboHelp 9 project, i get the following error:
Open project was cancelled or the application was unable to load database for "C:\CODE\HELP\HELP.CPD"
How can I correct the CPD file without starting over?

Hi there
Just delete the CPD and re-open the project. When RoboHelp sees it missing, it will bake up a fresh one to use and all should then be well.
Cheers... Rick

Unable to create database error

Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
Thanks

There is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to change the status of a project to approved

Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.

R4S wrote:
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.Please see these docs.
CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
Thanks,
Hussein

Unable to get database instances

I have a custom Java plugin that I had to migrate to a new server. I'm assuming I am missing some configuration somewhere that was present on the old server.
I am getting this error: com.primavera.integration.client.ClientException: Unable to get database instances.
I have tested the "demogeneral.cmd" and it seems to login to the database just fine.
I'm not quite sure what else to test now.

Not sure if your plugin is running local or remote but I have used this to test remote connections.
import com.primavera.integration.client.Session;
import com.primavera.integration.client.EnterpriseLoadManager;
import com.primavera.integration.client.RMIURL;
import com.primavera.integration.client.bo.object.Activity;
import com.primavera.integration.common.DatabaseInstance;
import com.primavera.integration.client.bo.BOIterator;
import com.primavera.integration.client.bo.object.Project;
import java.util.ArrayList;
public class Main {
public static void main(String[] args) {
Session session = null;
String host = "Bavaria";
int port = 9099;
String user = "admin";
String password = "password";
String databaseName = "P6Demo";
String databaseId = "";
try
DatabaseInstance[] dbInstances = Session.getDatabaseInstances( RMIURL.getRmiUrl( RMIURL.STANDARD_RMI_SERVICE, host, port ));
for (DatabaseInstance dbInstance : dbInstances ) {
                    System.out.println(dbInstance.getDatabaseName());
                    System.out.println(dbInstance.getDatabaseId());
                    System.out.println();
                    if (dbInstance.getDatabaseName().equals(databaseName)) {
                         databaseId = dbInstance.getDatabaseId();
               if (databaseId != "") {
                    session = Session.login( RMIURL.getRmiUrl( RMIURL.STANDARD_RMI_SERVICE, host, port ), databaseId, user, password);
                    System.out.println("Logged In");
catch ( Exception e )
System.out.println(e.getMessage());
finally
if ( session != null ) session.logout();
}

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.). You can now: <ul>
<li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

Hello,
I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
The message that i see is Error: 1002097 Unable to load database [PlanType1]
I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
Thanks
Azmat Bhatti

I think you have currepted backup.
Try run essmsh script to recover broken block's.
Backups - Files still locked after beginarchive

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

"Error 1002097 Unable to Load database" while starting an Essbase App.

Hello Essbase Experts,
I am getting below error while starting an Essbase Application:
"Error 1002097 Unable to Load database"
Below is an extract from the Essbase Application Log:
[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
delay.
[2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
access Essbase files while Essbase server is running.
[2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
[RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
[2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
[2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
Please sugest pointers to start the application.
Thanks,
KK

*[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
Reasons
looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
(right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
Hope this give u some idea

Unable to Detach Database in a Compiled Project - Labview 7.1

Similar Messages

Maybe you are looking for