Unable to detect a compatible DVR in your household

Have found lots of posts about this issue but no fixes. iPad TV remote app worked well with my old silver Magnovox cable box, but that died, so now I have a black Xfinity modem (not the new X1). Cannot connect the DVR through the xfinity website or the TV remote app. Multiple calls and dropped calls have me quite frustrated. Now waiting to hear back from a "specialist." Tried rebooting cable box, deleting app from iPad and reinstalling, emptying the cache in my browser, etc. multiple times. Still get the error message. The cable box I have now is supposed to work with the remote app and the online site. Did anyone find out what the fix was? Hate to replace the box again, but that may be our next option...

Changes to the account or new DVR's take 24-48 hours for the DVR manager to work as the backend systems sync up.
It will probably start working by Saturday.

Similar Messages

Audigy 4 Pro problem "setup is unable to detect a supported product on your system"

I have reinstalled my windows 7 one week ago and my audio card stopped working. I've managed to install manually one component of the audio card (multimedia audio controller) and now i have sound but the other one (PCI input device) still doesn't work, even if I try to install manually the driver, it says it's not supported (I tried with 4 different version of drivers xp sp2, sp3, vista and w7). The external hub doesn't work either.
Please tell me if I did something wrong because i don't know what to do with it.

I had the same problem when I uninstalled the drivers through device manager and then tried to install without rebooting. What I found was that after rebooting Vista detected the card and installed the old drivers. I simply installed the new drivers over the top and it updgraded them without a problem - other than the problems these drivers already have. Perhaps the new installer has fixed this problem.

Xtreme music sb0460 model, is this oem ? Can't find driver "Setup is unable to detect a supported.."

Hello, I have bought creative xtreme music sb0460 model, and its probably oem product. My msi 880 gma motherboard recognise device in windows 7 32 bit as pci device, tries to find update. But nothing. Actually I did many things, I've disabled my onboard sound device, tired manually to install. Tried many new updates from 2008 for this model from creative database, but nothing I just only get message "Setup is unable to detect a supported product in your system" when try launch a setup. I don't know why is that. I will give some numbers and maybe you will help me. Serial number MASB0467641R08326T; Tested to comply with fcc standrats for home or office use complies with Canadian ICES-003 class b
Thank you for advices !

Download the newest drivers for the card and extract them using WinZip, 7-zip, or WinRAR. Then you can manually browse to the driver folder with the .inf file inside and install the driver that way. Done it many times myself and it works well.
Originally Posted by Erna
Hello, I have bought creative xtreme music sb0460 model, and its probably oem product. My msi 880 gma motherboard recognise device in windows 7 32 bit as pci device, tries to find update. But nothing. Actually I did many things, I've disabled my onboard sound device, tired manually to install. Tried many new updates from 2008 for this model from creative database, but nothing I just only get message "Setup is unable to detect a supported product in your system" when try launch a setup. I don't know why is that. I will give some numbers and maybe you will help me. Serial number MASB0467641R08326T; Tested to comply with fcc standrats for home or office use complies with Canadian ICES-003 class b
Thank you for advices !

HT1481 Unable to detect the shuffle ipod second generation in windows 8

Hi , I have been trying the connect apple shuffle ipod with windows 8 However I'm unable to connect .
I tried following troubleshooting steps.
Action :- Tried to reset the shuffle ipod
Result- Successfully able to reset the ipod But still unable to connect to windows 8
Action :- Tried to connect on other computer with same cable ( Windows7 )
Result :- It is working fine.
Action :-Tried to install the drivers from C:\Program files \Common files \ Drivers
Result :- Getting Yellow sign mark in device manager with error code Code 10 device cannot start .
Action :- Tried to delete the microsoft upper filter and lower filter
Result :- Successfully able to do that But unable to detect the ipod
Action :- Tried to install the latest version of i-tunes 11.1.5
Result :- Successfully able to do that .However there is no luck.
Action :- Tried to reboot the system . Perform the power cycle of the ipod and laptop
Result :-Unable to detect the ipod
Action :- Tried to change the different USB ports
Result :- Still unable to detect
Can you please suggest me few steps or how can i restore the apple ipod without i-tunes ?

Hello JimmyS,
The article linked below details a number of steps that can help get iTunes to recognize your iPod.
iPod not appearing in iTunes
http://support.apple.com/en-us/HT203449
Regards,
Allen

Unable to detect LUNS in solaris 9.

Hi all,
We added HBA card to one of the Solaris 9 server (Sun Fire V240). Configured zoning and presented the LUNs to the server from EVA6100. But LUNs are not visible in OS side. Verified the link, zone config and the Storage config. All looks fine.
Applied all required packages and patches from server level.
Storage Details:
Storage Model: EVA 6100
Server Details:
OS Version: Sun Solaris 9
HBA Model: SG-XPCI2FC-EM4-Z - Sun StorageTek PCI-X Enterprise 4Gb Dual Channel FC Emulex Host Bus Adapter, includes standard and low profile brackets. RoHS 6 compliant
luns are visible in OK prompt but not in OS.
if there are additional parameters i need to know
Regards,
parkar
UAE
Edited by: parkar on Jul 16, 2012 10:23 PM

hi
we are still unable to detect luns in OS.
We have installed the recommended packages/patches from Oracle mentioned below, but still the LUN is not visible. Kindly check and let us know if any other parameters to be configured in Solaris side.
dvsrv19:/export/home/osteam/SAN_Patches/p10297699_440_Generic/SAN_S9_4.4.15_install_it#./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : created on Mon Aug 6 12:31:30 GMT 2012
This routine installs the packages and patches that
make up Sun StorEdge SAN on Solaris 9 (only).
Would you like to continue with the installation?
[y,n,?] y
Verifying system...
Checking for incompatible patches : Done
Begin installation of SAN software
Installing StorEdge SAN packages -
Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWqlc : Installed Successfully.
Package SUNWqlcx : Installed Successfully.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.
StorEdge SAN packages installation completed.
Installing StorEdge SAN patches and required patches -
Patch 111847-08 : Installed Successfully.
Patch 113046-01 : Installed Previously.
Patch 113049-01 : Installed Previously.
Patch 113039-21 : Later version installed 113039-25.
Patch 113040-26 : Later version installed 113040-33.
Patch 113041-14 : Installed Previously.
Patch 113042-19 : Installed Successfully.
Patch 113043-15 : Installed Previously.
Patch 113044-07 : Installed Successfully.
Patch 114476-09 : Later version installed 114476-10.
Patch 114477-04 : Installed Successfully.
Patch 114478-08 : Installed Successfully.
Patch 114878-10 : Installed Successfully.
Patch 119914-14 : Later version installed 119914-15.
Patch installation completed.
Installation of Sun StorEdge SAN completed Successfully
Please reboot your system.
dvsrv19:/export/home/osteam/SAN_Patches/p10297699_440_Generic/SAN_S9_4.4.15_install_it#
Regards,

Unable to detect any parameter in html (webresource) when value is passed from onload method of form

Unable to detect any parameter in html (webresource) when value is passed from onload method of form
I am trying out some stuff. For which I created a simple Entity. In the form of the entity I have added a simple web resource (html). And for the onload of the form I am calling the following function
function HelpDeskActivityOnLoadhandler()
var customParameters = encodeURIComponent("first=First Value&second=Second Value&third=Third Value");
    Xrm.Utility.openWebResource("tsi_scriptzz",customParameters);
Here is the code for the tsi_scriptzz.html
<html>
<body>
  <script type="text/javascript">
    var vals = new Array();
    if (location.search != "") {
     vals = location.search.substr(1).split("&");
     for (var i in vals) {
      vals[i] = vals[i].replace(/\+/g, " ").split("=");
  </script>
</body>
</html>
MY PROBLEM IS -> location.search is always coming back with empty string. So, it not getting the parametrs I am passing from the load method of the form.
Could someone kindly help me.
Thanks,
Hasib

Hello, I tried it myself. I got a new_test.htm file and a new_test.js file. The loadWebResource function is called on the OnLoad event of an Entity.
function loadWebResource()
var params = encodeURIComponent('param1=value one&param2=value two&param3=value three');
Xrm.Utility.openWebResource('new_test.htm', params);
<html>
<head>
<title>Web Resource Parameter Example</title>

<script src="ClientGlobalContext.js.aspx" type="text/javascript"></script>
<script type="text/javascript">
document.onreadystatechange = function () {
if (document.readyState == 'complete') {
var params = getParams();
for(var i=0; i<params.length; i++)
log(params[i].name + ' ' + params[i].value);
// this functions puts the params in a 'dictionary format'
// f.e params[0].name = param1 & params[0].value = 'value one'
// You could customize this function or find some on the internet to retrieve a param fe by name...
// This is just an example how to get the name and values
function getParams(){
var params = [];
var querystring = Xrm.Page.context.getQueryStringParameters().Data;
var querystringparts = querystring.split('&');
for(var i=0; i<querystringparts.length;i++)
var split = querystringparts[i].split('=');
params.push({
name: split[0],
value: split[1]
</script>
</head>
<body>
</body>
</html>
Hope it helps now. Kind Regards

Unable to detect router WRT54G

Set up disk tells me it is unable to finish installation. ELA tells me it is unable to detect router. I just exchanged my WRT54G router for a new one because I was unable to access the router's web page. I was told by a computer guy that my router must be dead, so I exchanged it (it was only 4 months old). I also had a very lengthy online chat session to try to fix the problem.
My internet connections are working, though and ELA tells me my network is 'ok' and my wireless network is 'secured.' But under 'Network Settings' it does not recognize the router and I am unable to access and configure my router through the browser.
Below, I've tried to copy and paste the router web page -- it only shows a few details, no words at the tops of the tabs, so I am unable to configure.
Also, I have downloaded new firmware (this router is v.8) with the tftp tool -- it says it is successful. PLEASE HELP! I've spent too much time on this . . .
PING:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Stephanie Brown>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Stephanie Brown>
ROUTER WEB PAGE:
: v8.00.0
WRT54G
|
|
|
Automatic Configuration - DHCPStatic IPPPPoEPPTPL2TPTelstra Cable
: AutoManual
: 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252
: 192.168.1.
Static DNS 1: . . .
Static DNS 2: . . .
Static DNS 3: . . .
Automatic Configuration - DHCP: This setting is most commonly used by Cable operators.
Maximum number of DHCP Users: You may limit the number of addresses your router hands out.
More...

My suggestion is you start over from scratch. Redownload the firmware with a wired connection....After you install the firmware. Hit the reset button for thirty seconds and let it reconfigure. Powercycle the modem and router. By this I mean turn everything off. Turn on the modem...wait till it has booted up. Then turn on the router..wait till it has booted up and turn on the pc. Dont use the install cd or easy link. Once you have booted everything up. See if your computer will detect the router wirelessly. The ssid is usually "linksys". Make sure you can make a connection. Once you make a connection and can access the internet ....then you can connect to the router wired...and enter the web browser. See if you can get to this point first before we proceed.
Linksys WRT54G v3.1 (DD-WRT v23 SP2 09/15/06 std) Linksys WRT54G v2 (Firmware Version: v2.04.4)

TS1363 I have a new iPhone 4S, I`m using windows vista but iTunes is unable to detect it at all...

I have a new iPhone 4S, I`m using windows vista, although my computer detects an "apple iphone", iTunes is unable to detect it at all. I`m unable to sync any media..

Welcome to the Apple Community.
Once you have enabled find my phone in your iCloud settings on your phone and find my mac in iCloud settings on your Mac, you can log in at iCloud.com and see both devices on the Find my Phone feature there.

Spotlight -Unable to detect Spotlight indexing status

Hi,
I am receiving the folowing error.
Spotlight -Unable to detect Spotlight indexing status
OS Bot is not accessible or mdutil(/usr/mdutil is not working.
Basically Spotlight has stopped working
I don't have a clue how to fix this.
I would appreciate any help giving me instructions on how to fic this problem
Thanks

I had the same problem and none of the "solutions" or "fixes" I found on any post helped. Eventually I found that my /etc/hostconfig file was not right. Every line in the file lists a service and then a setting, and there should be only one entry per line with no white space. My hostconfig file had two entries on one line, and it was the line that controlled spotlight starting up.
In /etc/hostconfig, the spotlight line looked like this:
SPOTLIGHT=-YES-CRASHREPORTER=-YES-
But it should have looked like this:
SPOTLIGHT=-YES-
I used vi to edit the file and moved "CRASHREPORTER=-YES-" to the next line. I then rebooted and spotlight started normally.
If your /etc/hostconfig is similarly corrupted, do the following:
1. Launch Terminal (in ~/Applications/Utilities)
2. type: sudo vi /etc/hostconfig
3. enter root password
4. use the arrow keys to place the cursor on the "C" in "CRASHREPORTER=-YES-"
5. type i
6. press <enter>
7. press <esc>
8. type :wq!
9. press <enter>
10. reboot
Message was edited by: mcsysad1
Message was edited by: mcsysad1

Unable to Detect SDHC Card on Windows 7

Hi guys, recently I received a 4 gb sdhc card but when insert the card into the card reader & plug to the usb port, win 7 was unable to detect it. 1st thought was this sdhc card is bad but i when plug it to another win 7 pc it detects
straight away, so the card is not faulty. I tried uninstalling the usb driver & HID driver still can't detect. Notice that under the disk drives it does show 'Mass Storage Device USB Device' which means it actually did detect but won't show up
in 'My Computer' ..... Why? Hope someone can help to resolve this issue. Thanks

Here is the answer from Scandisk
STEP 1 - Backup the registry
1. Unplug the device from the USB port.
2. Run regedit.
Windows XP: Go to Start > Run, type in regedit and then click OK.
Windows 7, 8 and Vista: Click the Start button, type regedit in the search box, and then press Enter.
3. From the registry menu, choose File > Export.
4. Name the file SNDK.reg and save it to your desktop.
STEP 2 - Remove SanDisk info from the registry
WARNING: DO NOT delete any registry key other than keys that include VID_0781. Deleting registry keys other than keys that include VID_0781 MAY cause your computer to not boot properly.
1. From the registry menu, click Edit and choose Find.
2. Type in VID_0781 and click Find Next.
3. Once the search finishes, right-click the highlighted registry key and select delete.
4. Press the F3 key to find the next registry key that includes VID_0781.
5. Right-click the highlighted registry key and select delete.
6. Repeat this process until the search returns with No results Found.
NOTE: Under Windows 7, 8 and Vista, some registry keys may be protected and cannot be deleted. Simply skip over these keys if you receive a message that the key cannot be deleted.
7. Once all registry keys containing VID_0781 have been deleted, reboot your computer.
8. Plug the device into the computer after it's finished rebooting.

CiscoWorks Backup status unable to detect

Hi Joseph,
I am facing problem with the Ciscoworks server backup, when i checked the backup status it says " Backup not found or unable to detect " .Also checked the dbbackup.log file and found there is no update in the file.
Please need your info on this.
Thanks & Regds,
Lalit

Hi Joseph,
I have added the following line in the backupstatus.properties file and restarted the Ciscoworks service.Also checked the Scheduler services and found to running.I have reschedule the backup. Even after that backup is not working.When i checked the backup admin page it says " Backup not found or unable to detect "
I have checked the dbbackup.log file and found there is no update to the file.
I have added the LAST_BACKUP_FOLDER= destination backup folder and rest i just kept blank
for e.g
LAST_BACKUP_STATUS=
LAST_BACKUP_DATE=
LAST_BACKUP_DETAILS=
LAST_BACKUP_FOLDER=destination backup folder name
Please need your info on this.
Thanks & Regds,
Lalit

Macbook 2008 unable to detect the 4 gen iPod or iPad

The macbook 2008 model is unable to detect iPod or iPad of 4th Generation.
I am unable to upgrade the OS software and unable to install any new software. (.dmg)
Help me.

What OS on the computer?
What version of iTunes?
Why are you unable to upgrade your OS.

Laptop is unable to detect my home router wifi network but detecting all other neighbour networks

My pavilion g6 laptop is unable to detect my home router wifi network but detecting all other neighbour networks even my phone network also. The same router network is detecting good in another laptops.

Hi , Welcome to the HP Forums! It is a great place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More i understand that your notebook finds and displays many network but not yours but another laptop does locate it. One of the easiest steps to try is to reset the router by removing power for approximately 20 seconds and then reconnecting the power. Give the router time to reset and come back up . Does you network now show? If your network is set to 5.0 GHz try changing the setting to mixed mode or 2.4 GHz as that is the best selection for HP notebooks. Here is a link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). To say thanks for replying, please click the thumbs up icon below. If this overcame your difficulty please tell people by selecting solution provided to allow it to found with greater ease. Best of Luck!

ITunes unable to detect iPod nano

well, my iPod nano was working fine until yesterday when i did the iTunes update. After I went through with the iTunes update, it prompt me to update the program in my iPod nano. I thought it was supposed to help in making my life easier but it turns out to be otherwise. 1 min into the update, it started giving me error messages and finally end with a message saying files in my iPod nano are corrupted. Now, despite repeated attempts to reset nano and reinstall iTunes, iTunes is still unable to detect nano. I really need some help with this problem.

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
Still no joy, see these.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
Put it into disk mode first.
Putting iPod into disk mode.

Local Director unable to detect a failed web site

Hi all,
I have configured the local director to load balance several web sites on two real servers. One of these sites is required to be configured in backup mode.
For some reason the local director is unable to detect the site has gone down (by stopping the site to update the web content), therefore not directing requests to the backup real server.
I am using IIS 5.0, since its quite popular out there, has anyone experienced a similar situation and if so, how did you resolve it?
thanks

Your problem is based in the Operating system, not the Local Director. The LD is a layer 3 device. Microsoft put their application architecture together different from the Unix world, ie: Any ip address bound to a MS box is answered for by the OS - not the application (IIS in this case) If IIS is hosed up the OS will still answer for the IP you have bound to the NIC of the OS - the OS does not care at layer 3 that you want a higher level reply - LD does its availability checking at Layer 3 - the OS layer for MS. In the Unix world when an application is bound to a port - ie: Apache to port 80, then the apache deamon answers for that ip/port - not the OS - Apache panics and it will not respond at Layer 3 - the OS could be fine, but the LD will know that ip/port is not responding and will take the appropriate actions by your LD config.
Check out the httpprobe feature of the LD - it lets you test for a file in a URL inside the LD.
Cheers

Unable to detect a compatible DVR in your household

Similar Messages

Maybe you are looking for