Unable to determine consolidation Area for Databasis AF

Hi All,
I wanted to check BCS results in BW I found the following errors in running query:
1. Error reading the data of InfoProvider BCS_C1V11 (Virtual cube)
2.Unable to determine consolidation Area for Databasis AF
Can anybody advise, what sould be the probable reasons? I regenerated the consolidation areas, still its same error. Any thoughts, what I should look into.
Thanks and Regards,
Ashwin Nagar

Hi Ashwin,
You need to specify BCS mandatory fields when doing a listcube from the virtual cube.
Period
Year
Controlling Area
CS Chart
CS Version
BCS Version (or any other custom versions)
Fiscal Year Variant
Group Currency
If you are trying to get consolidated results, make sure cons group is a field for display from the cube.
Also, if running for a consolidation group, you must enter the cons group you want plus all groups which roll into it.
For example, if you have
CG 1
- CG 2
- - CG 3
- CG4
and you want to get results for CG1, you need to enter CG1, CG2, CG3, CG4.
This is why List of Totals Records is preferred.
Hope that helps
- Chris

Similar Messages

BCS: unable to determine consolidation area for data basis B1

Dear gurus,
   I have two consolidation areas B1 and Y1 on the same data basis B1. I want to report the data of consolidation area Y1. I created a query which had the restrictions on consolidation chart of accounts, fiscal year variant, version, fiscal year, posting period and group currency. But when I opened the query with BEx Analyzer, the error prompted like below:
   Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
   Error reading the data of InfoProvider ZCB_B1V11
   Unable to determine consolidation area for data basis B1
The row of the query is Item. I found if I activated the hierarchy of Item, this error occured and if deactivated the hierarchy of Item, the error disappeared.
Please advise. Points will be awarded if helpful.
Thanks in advance.
Jin Ming

Hi Jin Ming,
Something is wrong with your hierarchy.
In my case items hierarchy works fine.
May propose two cases:
1. Which version of your hierarchy, defaulted 100 or not? If not - wait for trouble.
2. Hierarchy are global for all consolidation areas. If you hierarcical structures in different cons areas assigned to different special versions, the I'd not exclude some controversies between globality and special version pecularities.
Hope this helps.

Error:Unable to determine data basis for virtual InfoCube.

Hi all,
 I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using a transaction cube which is a copy of standard cube 0BCS_C10 - Consolidation (Company/Profit Center). (Transaction cube).
When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction RSRT it is showing following errors.
1.Unable to determine data basis for virtual InfoCube.
2.Error reading the data of InfoProvider.
3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Will be thankful for suggestions.

Hi Pankesh,
Thanks for the response..
 Transaction cube contains data and characteristics of virtual cube are consistent.
 I am trying to see the contents of the virtual cube in transaction LISTCUBE, there also its showing same errors.
How can I proceed now?

Unable to determine Auto batch

Hi Gurus,
My user is doing STO scenario,
He created P.O after that he done Vl10b and now he is doing delivery,
At this point user wants batch to be determine automatically.
I have maintained auto batch tick for the batch item category.
I have checked the stock for that material also, But still i am unable to determine auto batch for that material.
So please suggest me what setting need to be done to determine auto batch for this scenario.
Thanks and Regards
Subramanyam.N

Hi Subramanyam,
Please check configuration steps for automatic Batch determination in delivery,As its very difficult to tell wht might be missing so i hope this will help you to resolve your issue.
To trigger the batch number in the delivery document automatically we need to do necessary configuration and master data maintenance.
1.Batch management works on condition technique, menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check. Here we need to create new strategy types if necessary and access sequence if necessary, and also batch search procedure if necessary
2.Allocate the SD batch search procedure using the menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check à Batch Search Procedure Allocation and check activation à Allocate SD search procedure/Activate check.
3.Activate Automatic Batch Determination in SD using menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check à Activate Automatic Batch Determination in SD. Here we have two options, 1. To activate batch determination for sales order item and 2. is to activate batch determination for delivery item, upon the requirement we can activate at both the places, But in general batch are activated only at delivery item level.
4.If we need shelf life expiration date for the batch we need to create a class using u201Ct code: CL01u201D, type in a name for the class and select the class type as u201C023 u2013 Batchu201D and maintain the characteristics as LOBM_VFDAT and LOBM_HSDAT (this for production).
5.Once the class is created go to material master under classification tab and maintain the class created.
6.One more important setting in the material master is to check the batch management. This need to be done before you process the material for orders.
7.Go to create batches for materials using t code: MSC1N or menu path: SAP Easy Access à Logistics à Central Functions à Batch Management à Batch à Create/change/display. You can create new batches for the materials and also maintain the Shelf life expiration date (SLED) in the batch master.
8.so as to determine the batch automatically we need to maintain a condition record for batch search strategy type using t code: VCH1 or menu path: SAP Easy Access à Logistics à Central Functions à Batch Management à Batch Determination à Batch Search Strategy à for sales and distribution à create/change/display. During the maintenance, maintain the class also in the condition record.
These steps will automatically trigger batch management during delivery processing. System will allot the batch automatically upon the availability of the stock in the batch.
Regards,
Pavan

Secure one consolidation area - authorization question

Hi,
I want to secure one consolidation area within an SAP SEM Sandbox (on Netweaver 2004 basis) for the consolidation workbench (ucwb).
The background is, that i´ll have on consolidation are for traiing purposes with a showcase (that i want to secure) and the other consolidation area´s can be used for sandbox purposes.
I try to find the correct authorizations object to avoid these one cons. area from changes, but I don´t find anything.
Do you have some idea´s, which authorization object(s) I can use for this purpose?
Regards,
Dennis

Dear Mani,
thanks for your answer. But how can I control the authorization check for the consolidation area? Which elements are responsible for this authorization check, that I have to assign to the users, which are not allowed to change the consolidation area in the consolidation workbench, or is this authorization check only valid within the Consolidation Monitor?
Hope you can help me,
Regards,
Dennis

Unable to determine domain for account Uninstall ecc6 on domain

Hello All,
I am trying to uninstall sap ecc6 from a server on a domain . While proceeding with uninstallation, it got stuck with following error details after entering the database details on sapinst.exe
FSL-01018 Unable to determine domain for account S-1-5-21-705529515-409054649-1020538192-1108. The group name could not be found.
ERROR 2008-01-02 10:29:35
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
I am trying to uninstall by logging to that server as administrator of domain . Can you guys give me some clue to fix this.
Thank you in advance

Hello All,
Here are the other log details
INFO 2008-01-29 11:02:05
An error occured and the user decided to retry the current step: "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase".
ERROR 2008-01-29 11:02:10
FSL-01015 Unable to determine whether account TESTSAP\Administrator is member of account wicomp05\ORA_C30_DBA. The group name could not be found.
ERROR 2008-01-29 11:02:10
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-01-29 11:02:10
FCO-00011 The step checkForExistingDatabase with step key |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase was executed with status ERROR .
INFO 2008-01-29 11:02:17
An error occured and the user decided to retry the current step: "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_uninstallDB|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|2|0|checkForExistingDatabase".
ERROR 2008-01-29 11:02:21
Here TESTSAP\Administrator is the administrator of domain TESTSAP on which sap is installed and wicomp05\ORA_C30_DBA is hostname and oracle dbsid and the group dba,
When I check on the the group ORA_C30_DBA, TESTSAP\Administrator is the member of group
I tried to change the name of the group to
ORA_C30_DBA1 and it successfully passed the phase of error. However the drop database phase seems like disabled and it tells to manually drop the database.
Can I proceed with this method and finally drop the database manually ?. Have any one done like this.
Please help.

Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

How to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscript

how to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscriptions edition" please heelp

Hi migliii,
I found a few solutions mentioned in this discussion thread Adobe photoshop cs5 extended installation error (Mac); Inconsistency in installer database. If you are unable to resolve your problem still, I'd suggest that you contact Customer Support (http://www.adobe.com/aboutadobe/contact.html). Use any of the options on this page to get in touch with a customer support person.
Thanks,
Preran

Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
SQLSTATE: NA000
Native Error Code:0
Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
Does anyone have any fixes, recomendations, or advice?
Thank you,
Eric Edwards
null

Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
name.domain.subdomain
then you should try using this full name when configuring the ODBC data source.
null

ISE BYOD Error: "We are unable to determine access privileges" on redirect

I am running ISE 1.1.1 and have gone through the design guide and setup the certificate based wireless authentication and device registration process using the ISE as a SCEP proxy for handing out certificates. On the device registration portal instead of showing the device MAC the policy services node MAC shows up and I get an error that says "We are unable to determine access privileges in order to access the network. Please contact your adiminstrator."
The an hour later I can connect just fine. The authentication logs on ISE are exactly the same in both cases. So it seems like a bug I opened a TAC case but am also posting here.

I havent opened a TAC case and havent seen this issue since when i first set this up.
Can you go to your devices portal (https://ipofise:8443/mydevices) login using your credentials and see if the device is registered or the status is set to lost. I would suggest deleting if it is there and try going through the process again.
Thanks,
Tarik Admani
*Please rate helpful posts*

ERM -- unable to determine matching org. level for BRGRU in the system

Hello,
I have a problem.
When I trY to import in the ERM (SAP GRC AC 5.3 SP5) a mass import of roles (derived roles) using the template Organizational Template.
Some of the roles gives me this error:
"Role not imported; unable to determine matching org. level for BRGRU in the system".
In the file I put for example
ZAPVAPINTE BUKRS 0083
Am I doing it right? or do I have to put $BURKS?
Best regards.
Pablo Mortera.

I have found that when you run the background job "syncronization of the organizational values" it pulls the org value name and all "values" assigned to it. If you don't have values specified (on the table level) for the org name, you get this error. We have many fields that we use values for these fields but they aren't specified in the table.
For example: We have the org value "PLVAR" with the values "AL", "01", "02", "03", and "GB" assigned to it. You can actually see these values in the backend system using SE11. We do not get this error on this org value. However, we have another org value "SACHZ" that we use, but we do not have any values assigned to it on the table level, so it is giving us this error. We are trying to find out how to populate the "values" field since this was not done through configuration.
Here are the steps: (1) Go to SE11 in your backend system. (2) Put your org value (example: PLVAR) in the "DATA TYPE" field and click display. (3) Double click on the Domain name. (4) Go to the Value Range Tab and click on the "Value Table" name if there is one. This is the table that has the org values assigned in it - normally done through configuration. (5) go to Utilities --> table contents --> display. (6) execute the table contents. These are the values that the sync job pulls over. If there are no values there or if there is no "values table" name, you get the error. If there are values there, you don't get it.
We are working with our technical team to get the values in these fields to see if that works. Another quick way to see if there are values assigned to the org field is to use "Org Value Mapping" in ERM. Select the "derived org level field" you want to see and click on the "org value from" magnifying glass. If no values are there, a "values table" hasn't been populated in SE11.
It doesn't make much sense to me though because we can still use values for these fields for our derived roles....we just don't populate the table with them.
I'll update this message if we find a solution.
Thanks,
Peggy

Help me for consolidation of multiple databases

Hi all Oracle Gurus,
I need some help, could anyone please help me in my problem?
Here is my problem,
I have three seperate Oarcle Databases installed on three different machine. I am in search of any tool or the way to get access all databases from one new machine where I can access all my three database simultaneously, consolidate as per my requirement.
Is there any tool available or is there any other mathod with the help of which I can do these.
Regards,
Paras
Edited by: user10761296 on May 7, 2009 12:36 PM

Hello,
I appreciate your reply.
Actually I am having three databases for three different modules which are interrelated. Now I have to generate report which requires data from all these data bases. All these reports are for the purpose of consolidation.
So what I have to do is to get data from these databases consolidate and sometimes modify the respective databases if required. I don’t know where we have any tools or method available which can help me to achieve this.
Thanks again for replying.
Regards,
Paras.

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

OIM connector for db table--unable to Reconciliation data to OIM database

HI everyone
I installed OIM and Connector for Database Application Tables 9.1.03
I want to only Reconciliation one table in the target db,organization table.
when I build a GTC-connector though the administratoe console ,and run the task
nothing can Reconciliation into OIM db which map to a table
when look log .I find data has already into hashmap,but unable to insert Oimdb
only error msg is : Processing Reconciliation Message with ID -1 failed.
ER],Class/Method: tcDataBase/readPartialStatement entered.
INFO,21 Jul 2010 10:31:28,065,[XELLERATE.DATABASE],DB read: select rce_key, obj_key, rce_status, rce_delete_event, rce_rowver from rce where rce_key=-1
DEBUG,21 Jul 2010 10:31:28,065,[XELLERATE.DATABASE],select rce_key, obj_key, rce_status, rce_delete_event, rce_rowver from rce where rce_key=-1
INFO,21 Jul 2010 10:31:28,066,[XELLERATE.PERFORMANCE],Query: DB: 0, LOAD: 1, TOTAL: 1
ERROR,21 Jul 2010 10:31:28,066,[XELLERATE.JMS],The Reconciliation Event with key -1 does not exist
INFO,21 Jul 2010 10:31:28,066,[XELLERATE.PERFORMANCE],Message Process: com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages : 1011
DEBUG,21 Jul 2010 10:31:28,066,[XELLERATE.AUDITOR],Class/Method: AuditEngine/getAuditEngine entered.
ERROR,21 Jul 2010 10:31:28,066,[XELLERATE.JMS],Processing Reconciliation Message with ID -1 failed.
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.JMS],Class/Method: ProcessOfflineReconMessages/execute entered.
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.JMS],Class/Method: ProcessOfflineReconMessages/execute - Data: reconId - Value: -1
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.JMS],Class/Method: ProcessOfflineReconMessages/execute left.
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.JMS],Class/Method: ProcessOfflineReconMessages/finishReconciliationEvent entered.
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.JMS],Class/Method: ProcessOfflineReconMessages/finishReconciliationEvent - Data: plReconciliationEventKey - Value: -1
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.SERVER],Class/Method: tcDataBase/readPartialStatement entered.
INFO,21 Jul 2010 10:31:28,116,[XELLERATE.DATABASE],DB read: select rce_key, obj_key, rce_status, rce_delete_event, rce_rowver from rce where rce_key=-1
DEBUG,21 Jul 2010 10:31:28,116,[XELLERATE.DATABASE],select rce_key, obj_key, rce_status, rce_delete_event, rce_rowver from rce where rce_key=-1
INFO,21 Jul 2010 10:31:28,117,[XELLERATE.PERFORMANCE],Query: DB: 0, LOAD: 1, TOTAL: 1
ERROR,21 Jul 2010 10:31:28,117,[XELLERATE.JMS],The Reconciliation Event with key -1 does not exist
INFO,21 Jul 2010 10:31:28,117,[XELLERATE.PERFORMANCE],Message Process: com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages : 1006
DEBUG,21 Jul 2010 10:31:28,117,[XELLERATE.AUDITOR],Class/Method: AuditEngine/getAuditEngine entered.
ERROR,21 Jul 2010 10:31:28,117,[XELLERATE.JMS],Processing Reconciliation Message with ID -1 failed.
DEBUG,21 Jul 2010 10:31:32,328,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage entered.
DEBUG,21 Jul 2010 10:31:32,328,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: Received new nessage
DEBUG,21 Jul 2010 10:31:32,328,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: mdb message name ReconOfflineMessage message handler task com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages
DEBUG,21 Jul 2010 10:31:32,328,[XELLERATE.SERVER],Class/Method: tcDataBase/readPartialStatement entered.
INFO,21 Jul 2010 10:31:32,328,[XELLERATE.DATABASE],DB read: select usr_login from usr where USR_KEY=1
DEBUG,21 Jul 2010 10:31:32,328,[XELLERATE.DATABASE],select usr_login from usr where USR_KEY=1
INFO,21 Jul 2010 10:31:32,329,[XELLERATE.PERFORMANCE],Query: DB: 1, LOAD: 0, TOTAL: 1
INFO,21 Jul 2010 10:31:32,329,[XELLERATE.DATABASE],dbLogger
DEBUG,21 Jul 2010 10:31:32,329,[XELLERATE.SERVER],Class/Method: tcDataBase/eventPreInsert entered.
DEBUG,21 Jul 2010 10:31:32,329,[XELLERATE.SERVER],Class/Method: tcDataBase/tcDataBase left.
DEBUG,21 Jul 2010 10:31:32,329,[XELLERATE.AUDITOR],Class/Method: AuditEngine/getAuditEngine entered.
DEBUG,21 Jul 2010 10:31:33,069,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage left.
DEBUG,21 Jul 2010 10:31:33,076,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage entered.
DEBUG,21 Jul 2010 10:31:33,076,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: Received new nessage
DEBUG,21 Jul 2010 10:31:33,076,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: mdb message name ReconOfflineMessage message handler task com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages
DEBUG,21 Jul 2010 10:31:33,076,[XELLERATE.SERVER],Class/Method: tcDataBase/readPartialStatement entered.
INFO,21 Jul 2010 10:31:33,077,[XELLERATE.DATABASE],DB read: select usr_login from usr where USR_KEY=1
DEBUG,21 Jul 2010 10:31:33,077,[XELLERATE.DATABASE],select usr_login from usr where USR_KEY=1
INFO,21 Jul 2010 10:31:33,077,[XELLERATE.PERFORMANCE],Query: DB: 0, LOAD: 0, TOTAL: 0
INFO,21 Jul 2010 10:31:33,078,[XELLERATE.DATABASE],dbLogger
DEBUG,21 Jul 2010 10:31:33,078,[XELLERATE.SERVER],Class/Method: tcDataBase/eventPreInsert entered.
DEBUG,21 Jul 2010 10:31:33,078,[XELLERATE.SERVER],Class/Method: tcDataBase/tcDataBase left.
DEBUG,21 Jul 2010 10:31:33,078,[XELLERATE.AUDITOR],Class/Method: AuditEngine/getAuditEngine entered.
DEBUG,21 Jul 2010 10:31:33,119,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage left.
DEBUG,21 Jul 2010 10:31:33,121,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage entered.
DEBUG,21 Jul 2010 10:31:33,121,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: Received new nessage
DEBUG,21 Jul 2010 10:31:33,121,[XELLERATE.JMS],Class/Method: MessageHandlerMDB/onMessage: mdb message name ReconOfflineMessage message handler task com.thortech.xl.schedule.jms.reconOffline.ProcessOfflineReconMessages
DEBUG,21 Jul 2010 10:31:33,121,[XELLERATE.SERVER],Class/Method: tcDataBase/readPartialStatement entered.
INFO,21 Jul 2010 10:31:33,121,[XELLERATE.DATABASE],DB read: select usr_login from usr where USR_KEY=1
DEBUG,21 Jul 2010 10:31:33,121,[XELLERATE.DATABASE],select usr_login from usr where USR_KEY=1
INFO,21 Jul 2010 10:31:33,122,[XELLERATE.PERFORMANCE],Query: DB: 1, LOAD: 0, TOTAL: 1
INFO,21 Jul 2010 10:31:33,122,[XELLERATE.DATABASE],dbLogger
DEBUG,21 Jul 2010 10:31:33,122,[XELLERATE.SERVER],Class/Method: tcDataBase/eventPreInsert entered.

log :
, classname:com.thortech.xl.gc.impl.transform.Translation, name:Translation
parameterList is following /nname: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
name: lookup, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, classname:com.thortech.xl.gc.impl.transform.Concatenation, name:Concatenation
parameterList is following /nname: input1, datatype: String, encrypted: false, type: Runtime.
validValueList is following
name: input2, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],transformProviderclassname:com.thortech.xl.gc.impl.transform.OnetoOne, name:OnetoOne
parameterList is following /nname: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],nameOnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],come in transformationName.equalsIgnoreCase(name)
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.transform.OnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameOnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, list[name: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{ONETOONE_CLASS_CAST=Attempted to cast an object to a subclass of which it is not an instance, ONETOONE_INPUTSTR_MISSING=Input String is Missing}
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.transform.OnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],classname--->com.thortech.xl.gc.impl.transform.OnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDERREGISTRATION],Loading Provider Class -->com.thortech.xl.gc.impl.transform.OnetoOne
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],output--->
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],Doing transfornmation for parentData--->com.thortech.xl.gc.vo.designtime.AttributeWithSource@a82b22
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],field--->ATTRIBUTE9
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],transformParams--->{input=com.thortech.xl.gc.vo.designtime.SourceValue@a7e343}
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],key--->input
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],not literal--->
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],inputField--->ATTRIBUTE9
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],input--->{ATTRIBUTE9=, ATTRIBUTE8=, ATTRIBUTE7=, ATTRIBUTE6=, CREATED_DATE=, ATTRIBUTE5=, ATTRIBUTE4=, IS_QUOTE=, ATTRIBUTE3=, ATTRIBUTE2=, CREATE_BY=, ATTRIBUTE1=, UPDATED_DATE=, UPDATE_BY=, ATTRIBUTE10=, IS_ASK=, ORGANIZATION_ID=5, UPPER_ORGANIZATION_ID=, ORGANIZATION_NAME=淇℃伅璧勬簮閮?, ORGANIZATION_CODE=5}
DEBUG,21 Jul 2010 10:31:27,228,[XELLERATE.GC.PROVIDER.TRANSFORMATION],sourceData--->TargetFields
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDER.TRANSFORMATION],inputFieldValue--->
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDER.TRANSFORMATION],transformationName--->OnetoOne
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],transformType--->OnetoOne
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName......
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],getProviderClassName--->
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],transformationProviders[classname:com.thortech.xl.gc.impl.transform.OnetoOne, name:OnetoOne
parameterList is following /nname: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, classname:com.thortech.xl.gc.impl.transform.Translation, name:Translation
parameterList is following /nname: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
name: lookup, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, classname:com.thortech.xl.gc.impl.transform.Concatenation, name:Concatenation
parameterList is following /nname: input1, datatype: String, encrypted: false, type: Runtime.
validValueList is following
name: input2, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],transformProviderclassname:com.thortech.xl.gc.impl.transform.OnetoOne, name:OnetoOne
parameterList is following /nname: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],nameOnetoOne
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],come in transformationName.equalsIgnoreCase(name)
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.transform.OnetoOne
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameOnetoOne
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, list[name: input, datatype: String, encrypted: false, type: Runtime.
validValueList is following
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{ONETOONE_CLASS_CAST=Attempted to cast an object to a subclass of which it is not an instance, ONETOONE_INPUTSTR_MISSING=Input String is Missing}
DEBUG,21 Jul 2010 10:31:27,229,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.transform.OnetoOne
I

Unable to determine consolidation Area for Databasis AF

Similar Messages

Maybe you are looking for