Unable to determine why CS3 slows pc or causes it to hang

I have several users who use the same workstation with CS3. The workstations are Dell Precision T5400 with Intel PIII Xeon processors, 4GB of RAM, nVidea Quadro FX 1700 video cards, and 160GB 7200K HDD. These pc's fun flawlessly if the users aren't using CS3 products. If they use the CS3 products they experience multiple issues, such as the pc hanging and needed to be manually shutdown and restarted, trouble printing from InDesign, inability to copy/paste within/from CS3 products, general slowness of pc when using CS3 products and if they leave their desks for an extended period (15 min. or longer) when they return the CS3 product(s) will have hung and need to be shutdown via the Task Manager.
One user experiences nearly daily BSOD (message indicates video card/ video card drivers) when using CS3 products.
Is it possible that these issues are related to the video card and the fact that it is designed more for CAD products and not CS3? If so does anyone have a recommendation for a better video card?
Other suggestions? I have enabled the 3GB switch.

It could be a video card issue. Before replacing video cards, try turning off any video acceleration. It could be a font issue. It could be an issue related to your virus and/or spyware software. It could be bad RAM. Try playing with the video card settings and possibly trying a newer or older video card driver. Then look at the virus/spyware software. Try turning off any third party programs that run in the background. Then try replacing all the fonts with copies off the original disks. If you have other hardware try looking at switching the RAM with a different computer that uses RAM of the same type and speed. If all else fails, then try a different video card to see if it makes a difference.
BTW, what OS?

Similar Messages

SQL Server Agent running SSIS package fails Unable to determine if the owner of job has server access

I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute.
When I look in the logfileviewer at the job history of the sql server agent job I see that the job failed with message...
The job failed. Unable to determine if the owner (DOMAINNAME\userid) of job runWebDevSmall has server access (reason: Could not obtain information about Windows NT group/user 'DOMAINNAME\userid'<c/> error code 0x6e. [SQLSTATE 42000] (Error 15404)).,00:00:00,0,0,,,,0
...even though DOMAINNAME\userid is in the logins for the sql server and has admin authorities.
Could someone show me what I need to do to get this to run? Thanks tonnes in advance for any help, Roscoe

This can happen when the network is too slow to allow a timely completion of the verification. Or the account running has no such right.
I suggest you try using the SA account for the job as it does not require to poll the AD.
Arthur My Blog

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

"Unable to determine destination partition, disk or drive" when Media deployment is used

We are heavy users of MDT 2013's "media" deployments -- in fact, once we finish testing a new image build on our lab server, media is created and is the sole method we use to deploy new systems due to many limitations.
We ran into the following issue lately when using USB sticks or hard drives for our deployment media. Deployment of an OS image fails at the "Inject Drivers" stage. The hard disk inside the computer is formatted properly, but the TS fails with
the error "Unable to determine destination partition, disk or drive".
I dug into the logs, and it appears that "Inject drivers" does a check for where the \Drivers folder should be placed. The problem is that most USB hard disks and many higher-end USB sticks show up as "hard drives" rather than "removable
media" when plugged into the machine. Adding another physical disk that appears as a fixed disk with an NTFS partition apparently confuses MDT and you get this error message. I think any "ReadyBoost enabled" USB stick has to show up on the system
as a fixed disk rather than removable, so if you use these you might have this problem.
The only workaround is to explicitly specify the disk number and partition number to use when you invoke "Install Operating System." The drivers step must take this information when determining where to put the driver store.
Is there any other explanation for why this would be happening? We're stuck with media deployment for the foreseeable future, and until Microsoft fixes the problem with handling of split WIM files, we have to use NTFS formatted disks/sticks...this might
be making it harder for the MDT logic to determine where to put the OS.

MDT should be smart enough to know that it should Skip USB drives.
However if you have a USB 3 Hard DIsk (not a USB Flash Disk), that might be the problem
1. Try using only Flash Drives.
2. Try plugging the USB Hard Drive into a USB 2.0 port
3. Additionally try not to use USB Hard Drives that are *Larger* that the internal hard drive.
If you still have problems, can you copy your Bdd.log file to a public site like OneDrive and share the link?
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Receiving error message: "Firefox is unable to determine if there is an update available".

I am running Firefox 31.0 on Mac OS X 10.6.8. I have it set to automatically check for updates, but not to automatically install them. Lately, I keep getting the error message "Update Failed" & "Firefox is unable to determine if there is an update available". But when I check manually, I get the message "Firefox is up-to-date". Any ideas on why it can no longer determine its update status?

Sometimes, the situation with complicated programs is;
Updating is fine, but sometimes the coding goes Gaa-Gaa. if
its update on update on update''' . . . . . .'''
So, every once in a while, instead of doing an update,
download the full installer. This should clean out the Gaa-Gaa.
If not, save the installer somewhere, remove the old program,
then use the installer.
Happy Computing.

Didadm: unable to determine hostname. error on Sun cluster 4.0 - Solaris11

Trying to install Sun Cluster 4.0 on Sun Solaris 11 (x86-64).
iscs sharedi Quorum Disk are available in /dev/rdsk/ .. ran
devfsadm
cldevice populate
But don't see DID devices getting populated in /dev/did.
Also when scdidadm -L is issued getting the following error. Has any seen the same error ??
- didadm: unable to determine hostname.
Found in cluster 3.2 there was a Bug 6380956: didadm should exit with error message if it cannot determine the hostname
The sun cluster command didadm, didadm -l in particular, requires the hostname to function correctly. It uses the standard C library function gethostname to achieve this.
Early in the cluster boot, prior to the service svc:/system/identity:node coming online, gethostname() returns an empty string. This breaks didadm.
Can anyone point me in the right direction to get past this issue with shared quorum disk DID.

Let's step back a bit. First, what hardware are you installing on? Is it a supported platform or is it some guest VM? (That might contribute to the problems).
Next, after you installed Solaris 11, did the system boot cleanly and all the services come up? (svcs -x). If it did boot cleanly, what did 'uname -n' return? Do commands like 'getent hosts <your_hostname>' work? If there are problems here, Solaris Cluster won't be able to get round them.
If the Solaris install was clean, what were the results of the above host name commands after OSC was installed? Do the hostnames still resolve? If not, you need to look at why that is happening first.
Regards,
Tim
---

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Unable to determine host adress????

Dear all,
When i am trying to creat a Questionnires for any transaction like lead,Opp,etc..
below error comes
/ CPIC-CALL: 'ThSAPECMINIT'#
Unable to determine host address: NiHostToAddr failed.
thats why i am not able to creat any survey suit and questionnares.
pls guide me
Thanks,
Jayesh

Hi Jayesh
This is a typical problem with CAT Server installation.
I am not sure whether you are on CRM 5.0 or earlier releases. From CRM 5.0 onwards, typically CAT Server is installed within core components. For earlier releases, one has to install External CAT Server and configure the IP address to link with CRM Server.
One way to get more info is, go to CRM_SURVEY_SUITE transaction, go to 'Survey Repository' button. In the next, click to menu path 'Administrate CAT Server'. Try to clear cache and restart the 'CAT Server'. It will give you additional information.
If your role is more application consultant, it is better to involve 'Basis Team' to get the CAT server installation corrected.
Warm Regards
Vijay

Unable to determine a calculation schema

Hi ALL,
I am getting warning while creating RFQ:-
Unable to determine a calculation schema
Message no. 06248
please tell me why this warning massage is coming,and how to correct this so that it wont show next time while i do business to same vendor.
With Regards,
Siddharth Shanker

Hi,
In the Materials Management area, a calculation schema - a framework of steps used to calculate costs, prices and taxes etc.
pls chk whether calculation schema is defined thru following path
IMG>>Materials Management >>>Purchasing >>>Conditions>>Define Price Determination Process>>Define Calculation Schema
Br,
Tushar Patankar

Unable to determine consolidation Area for Databasis AF

Hi All,
I wanted to check BCS results in BW I found the following errors in running query:
1. Error reading the data of InfoProvider BCS_C1V11 (Virtual cube)
2.Unable to determine consolidation Area for Databasis AF
Can anybody advise, what sould be the probable reasons? I regenerated the consolidation areas, still its same error. Any thoughts, what I should look into.
Thanks and Regards,
Ashwin Nagar

Hi Ashwin,
You need to specify BCS mandatory fields when doing a listcube from the virtual cube.
Period
Year
Controlling Area
CS Chart
CS Version
BCS Version (or any other custom versions)
Fiscal Year Variant
Group Currency
If you are trying to get consolidated results, make sure cons group is a field for display from the cube.
Also, if running for a consolidation group, you must enter the cons group you want plus all groups which roll into it.
For example, if you have
CG 1
- CG 2
- - CG 3
- CG4
and you want to get results for CG1, you need to enter CG1, CG2, CG3, CG4.
This is why List of Totals Records is preferred.
Hope that helps
- Chris

MDT 2012 - Failure 5456: Unable to determine Destination Disk....

Hi,
I get the following error when deploying windows 7 image to HP z420 workstation:
Failure 5456: Unable to determine destination disk, partition, and/or drive. See BDD.LOG
LiteTouch deployment failed, return code = -2147467259 0x80004005
Failed to run the action: inject drivers
When I deploy this same image with exact same settings to virtual machine or HP Elitebook laptop everything works fine. I have imported all z420 drivers to MDT too.
Any ideas?

Problem solved.
Solution:
“FAILURE (5456): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.”
I was only getting this message using MDT2012, not MDT2010. After digging around I noticed a modified setting — that I did not modify. Not sure why this happened.
Look inside the task sequence, under “Install Operating System”. While my other task sequences are set to “Specific Disk and Partition” this one was set to “Logical drive letter stored in a variable”. When I changed it, the error went away immediately.
http://www.thedecoderwheel.com/?p=1498

[SOLVED] Unable to determine major/minor number of root device - USB

I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
:: Running Hook [udev]
:: Triggering uevents...done.
ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
for device /dev/disk/by-uuid/[the uuid] ...
/dev/disk/by-uuid/(the uuid)'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[ramfs /]#
So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
# mkinitcpio -p linux
So I plugged it back into the laptop, booted it, and got the same error.
Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
# sudo fdisk -l /dev/sdg
Disk /dev/sdg: 500.1 GB, 500107861504 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00016b3d
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 208844 104391 83 Linux
/dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
/dev/sdg3 4417875 209230559 102406342+ 83 Linux
/dev/sdg4 209230560 976768064 383768752+ 83 Linux
Screengrab of my VirtualBox storage setup (just for giggles):
My /etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
# Tried this line instead -- didn't work either
#HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
HOOKS="base udev usb sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
My GRUB menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by UncleNinja (2011-12-02 15:33:21)

UncleNinja wrote:
skunktrader wrote:https://bugs.archlinux.org/task/27385
Perfect! Thank you!
Would it be safe to copy over the version from HEAD into my mkinitcpio?
EDIT: nevermind, derp derp the package is updated
EDIT again: Actually, it's not.
I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
Thanks guys!
Last edited by UncleNinja (2011-12-02 15:35:20)

The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
The operation failed because:
Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
Active Directory Domain Controller \\V-Svr03.mydomain.local.
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
   Testing server: Default-First-Site\DC1-DEV-OFC
      Starting test: NCSecDesc
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=ForestDnsZones,DC=hookemup,DC=local
         ......................... DC1-DEV-OFC failed test NCSecDesc
In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

Ok... I ran repadmin /showreps /v again and it shows no errors
C:\>repadmin /showreps /v
Default-First-Site\DC1-DEV-OFC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
==== INBOUND NEIGHBORS ======================================
CN=Configuration,DC=mydomain,DC=local
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381490/OU, 16381490/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114817/OU, 114817/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 66047/OU, 66047/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8098197/OU, 8098197/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
CN=Schema,CN=Configuration,DC=mydomain,DC=local
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8097482/OU, 8097482/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 65239/OU, 65239/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114149/OU, 114149/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381373/OU, 16381373/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
DC=ForestDnsZones,DC=mydomain,DC=local
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 66295/OU, 66295/PU
        Last attempt @ 2012-10-29 13:57:48 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 8098367/OU, 8098367/PU
        Last attempt @ 2012-10-29 13:58:13 was successful.
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 115032/OU, 115032/PU
        Last attempt @ 2012-10-29 13:58:25 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 16381653/OU, 16381653/PU
        Last attempt @ 2012-10-29 13:58:34 was successful.
DC=mySUBdomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114871/OU, 114871/PU
        Last attempt @ 2012-10-29 13:54:02 was successful.
DC=DomainDnsZones,DC=mySUBdomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
        USNs: 114017/OU, 114017/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
DC=mydomain,DC=local
    Default-First-Site\V-SVR03 via RPC
        DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
        Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
        DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 114017/OU, 114017/PU
        Last attempt @ 2012-10-29 13:52:39 was successful.
    Default-First-Site\HESTIA via RPC
        DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
        Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
        DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 16381614/OU, 16381614/PU
        Last attempt @ 2012-10-29 13:56:52 was successful.
    Default-First-Site\V-SVR01 via RPC
        DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
        Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
        DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 66325/OU, 66325/PU
        Last attempt @ 2012-10-29 13:58:34 was successful.
    Default-First-Site\ATHENA via RPC
        DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
        Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
        DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
        SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
        USNs: 8098385/OU, 8098385/PU
        Last attempt @ 2012-10-29 13:58:38 was successful.

Unable to determine the value of component ''! Workflow error, please help

Hi All:
I am getting the error "Unable to determine the value of component ''" and workflows are not getting processed. I found OSS notes 879100 related to this issue but I am new to workflow and not sure where to start from! Here is the notes description:
The workflow WS20500025 ('Service Connection Order Processing') encounters an error directly after being started. The following error messages are displayed in the workflow log:
SWP102: Error at start of an IF branch
WL821: Work item 000000100012: Object FLOWITEM method EXECUTE cannot be executed
SWF_RUN535: Error '9' when calling service 'SO_OBJECT_SEND'
SWF_RUN534: Problems occurred when generating a mail
WL863: Notification of completion cannot be generated
SWF_EXP_001073: Unable to determine the value of component 'QUOTATION'
SWF_EXP_001072: Error in the evaluation of expression '<???>' for item 1
SWF_RLS_001101: Operator 'GT': The value of the left operand cannot be determined
SWP085: Error when starting work item 000000100012
SWP010: Error when evaluating the IF condition for node 0000000075
Other terms
Service connection processing, service connection workflow
Reason and Prerequisites
This is due to a program error.
The checks in the workflow Basis have been made stricter. A query of the type 'Quotation.number > 0' now causes an error if the container element 'Quotation' is not set. This is always the case if the workflow is is running without quotation prcessing, for instance.
Solution
The error is corrected in the next Support Package.
If you want to implement the corrections manually in your system, change the condition in step 000075 of workflow WS20500025 as follows:
&IS-U: Kundenangebot& EX
and &IS-U: Kundenangebot.Verkaufsbeleg& > 0
Save and activate the workflow.
I am new to workflow and not sure where to start from! Could someone please help me with this? Rewards assured.
Thanks.
Mithun

ANy ideas? Please help me if anyone knows the answer.
Thanks.
Mithun

ORA-27078: unable to determine limit for open files

I installed Oracle XE on my Gengoooraclexe@ghost ~ $ lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2011 16:51:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-JUN-2011 10:03:30
Uptime 0 days 6 hr. 48 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ghost.emacs.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Poraclexe@ghost ~ $ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 25 07:19:58 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> show user
USER is "SYS"
SQL> startup
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -2958340
SQL> startup force
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -3378372
SQL> startup
ORA-03113: end-of-file on communication channel
SQL> exit
Disconnected

unable to determine limit for open filessee http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJFAIA
Is that a debian flavored distro?

Unable to determine why CS3 slows pc or causes it to hang

Similar Messages

Maybe you are looking for