Unable to dial out in China

my att Curve 8300 is unlocked but I'm unable to dial out, however, I can receive calls. I'm in China. I put the Sim card in
another unlocked phone and it works. When I check my BlackBerry the display reads:
Sim Card: Security Disabled (this top part is in the locked description but the following is in the unlocked instruction) Why?
ID#
Personalization all read Disabled.
I have entered my code to unlock the phone twice, and I'm told if I do it and it fails the third time it will self destruct...or it will
permanently be locked. Any clarity will be appreciated. Thanks.
Solved!
Go to Solution.

1. Whose SIM card do you have in the BlackBerry.
2. Look at this link and compare your screen with the one in the link.. is it truly unlocked?
http://www.blackberryfaq.com/index.php/How_do_I_determine_if_my_BlackBerry_is_%22unlocked%22%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

SAP BCM - Issues with CDT client workstation - unable to dial out

Hi folks,
This is a new install. Just got to the part where CDT is now working on a users desktop. Trying to establish an internal call to prove this part works. But cannot complete a dial string as the call button does not show up, is greyed out.
The keypad opens up and a number can be input , but it looks like the enter the dial string you should press CALL.
Enter or return does nothing
The call button shows as ALT C if you hover over it. Using ALT C instead does not work.
Any ideas what may be missing to complete this ?

Hello, Kevin.
It should be good if you provide the version of BCM. Have you checked the CDT log already?

GE 31591 Will not dial out (UK)

I have a new GE 31591 with credit, I receive in coming calls but I am unable to dial out.
Any help would be appreciated!
Thanks

Is your phone connected to the landline? It sounds like it is trying to dial out on the landline, that is not connected.
Make sure that the phone is logged into Skype (showing your Skype name, credit balance etc.). Dial the number in full international form to make sure that works eg 00441234567890. Press the blue Skype button rather than the green button and you should get the option to make a regular (landline) call or a Skype call. Select Skype call.
If all this works then you can configure the green button to work like the Skype button, also setting country and area codes can make the dialing simpler.
/Simon

Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log

I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber use subnets
192.168.1.0 and 192.168.200.0. They can receive calls but are unable to call out. This doesn't affect the Lync 2010 and 2013 desktop clients with enterprise voice...they work fine anywhere, even externally.
We are running Lync Server 2013 Standard Edition, with the latest updates applied. Mediation role is co-located. Edge server is setup and I think I have configured everything correctly. I have two network adapters, one external facing and one internal facing.
External facing one has dns settings and gateway, internal facing has neither. I have setup persistent routes that enable the edge server to ping hosts in 1.0 and 200.0 no problem. DNS is setup internally so anyone anywhere can ping the edge server (its dns
entry is routable lync2013edge.network.domain.ca). Phones used are the SNOM 720, I have the latest updates applied (8.8.3.27 UC)
On the actual SNOM phone, I will dial 7804636201. It will call and start ringing the other party. Almost exactly 10 seconds later I will hear a busy signal and then the phone displays "Media Connectivity Failure". I ran a log on SIP from the FE
Standard Edition server, here are some entries that I noticed that may have something to do with it (see bottom four paragraphs for SIP CANCEL)
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:42.240.0008db5d (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D806F0 ) Start Line: INVITE sip:7804636201;[email protected];user=phone SIP/2.0
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.269.0009106f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F91
Direction: outgoing
Peer: lync2013.network.caedm.ca:5070
Message-Type: request
Start-Line: INVITE sip:[email protected]:5070;user=phone;maddr=lync2013.network.caedm.ca SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:cO0WSS9wCFqUnP0dpEh6uQAA;gruu>;reg-id=1
Via: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Record-Route: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
Max-Forwards: 69
Content-Length: 3563
Content-Type: multipart/alternative;boundary="next_part_u00iwyrezkkuxf3d"
P-Asserted-Identity: "Joel Smith"<tel:+17808092404;ext=2404>
Message-Body: --next_part_u00iwyrezkkuxf3d
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-Dis; handling=optional; ms-proxy-2007fallback
TL_INFO(TF_DIAG) [0]411C.2DE8::02/24/2015-17:23:42.270.000915ec (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[3706963737] $$begin_record
Severity: information
Text: Routed a locally generated response
SIP-Start-Line: SIP/2.0 100 Trying
SIP-Call-ID: 3faa35f677ef48719b27c796251b0519
SIP-CSeq: 1 INVITE
Peer: 192.168.1.201:51470
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.274.000928d4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F93
Direction: outgoing;source="local"
Peer: 192.168.1.201:51470
Message-Type: response
Start-Line: SIP/2.0 101 Progress Report
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Content-Length: 0
ms-diagnostics: 12006;reason="Trying next hop";source="LYNC2013.NETWORK.CAEDM.CA";PhoneUsage="Long Distance";PhoneRoute="LocalRoute";Gateway="208.68.17.53";appName="OutboundRouting"
$$end_record
TL_INFO(TF_PROTOCOL) [1]411C.2DE8::02/24/2015-17:23:42.488.000930bc (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[741182734] $$begin_record
Trace-Correlation-Id: 741182734
Instance-Id: 2F96
Direction: incoming
Peer: lync2013.network.caedm.ca:5070
Message-Type: response
Start-Line: SIP/2.0 183 Session Progress
FROM: "Joel Smith"<sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
TO: <sip:7804636201;[email protected];user=phone>;tag=d265bdc1c8;epid=0A24894D6D
CALL-ID: 3faa35f677ef48719b27c796251b0519
CSEQ: 1 INVITE
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:0wzNMLUTNFKXO5KjW1mbdQAA>;isGateway
VIA: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE,SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
RECORD-ROUTE: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
CONTENT-LENGTH: 1388
CONTENT-TYPE: application/sdp
TL_VERBOSE(TF_NETWORK) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f6b (SIPStack,CRecvContext::CreateIncomingRequest:RecvContext.cpp(920))[3030787245]( 0000005F01E739D0 ) creating SIP_MID_CANCEL request
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f90 (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D7E2E0 ) Start Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00099054 (SIPStack,CSIPMessage::ParseNextHeader:SIPMessage.cpp(1532))( 0000005F03D7E2E0 ) Found Header: Reason: SIP;cause=488;text="Media Connectivity Failure"
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:51.369.000990c6 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2FA0
Direction: incoming
Peer: 192.168.1.201:51470
Message-Type: request
Start-Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport
Max-Forwards: 70
Content-Length: 0
$$end_record
I thought it might be a timeout issue, so I tried following these steps located here:
http://ipfone.hu/lync-mediation-server-cancel-problem/ After rebooting the server no changes were noticed.
I also checked out this website
http://blog.insidelync.com/2013/04/sip-trunking-101-with-lync-server-2013/ regarding disabling the check box "enable outbound routing failover timeout". Doing that had no effect.
Any other ideas would be appreciated.

Hi,
yes I see the config file is very simple and standard.
So the issue with snom on branch sites is random, it's correct?
From what I read in your answer, sometimes you can establish a correct communication between a snom and the called number +17804636201.
Have you tried to collect a network capture on a snom at branch location?
Do you have some other version of snom phone (300, 710, 821) to test?
Do you have some LPE ip-phone (Polycom CX600 o HP4110-4120) to test?
Regards
Luca
Luca Vitali | MCITP Lync/Exchange | snom Certified Engineer | Sonus SBC1000 Engineer

TS2634 My phone won't let me dial out or receive calls. Help

My phone won't let me dial out or receive calls. I'm also unable to send out text messages. Why is this happening and how do I fix this?

Hi VitalSignz,
If you can neither make nor receive calls on your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Regards,
- Brenden

N73 auto dial out???

Hello all,
Anyone has experienced N73 auto dial out without the owner/user knowing that it is dialling out to valid phone numbers? I have checked the auto-redial and this feature is not activated. So i am wondering if anyone of you have experience this problem before?

Hi,
I am getting the same problem with my N73. But the thing is it is redialling when i am on one call. It is auto dialling the last dialled call, even while i am still on the call.
For example, I have tried a number earlier & now also i am calling the same number means, then the same number is dialled again. This is happeneing to me only when I have connected my headset with the mobile.
More over in most cases, i am unable to dial a number immediately. Sometimes it takes 4 to 5 times to make a call. If i dial, it automatically disconnects.
Is it a firmware problem?
Nokia team has to reply for this issue. I am getting annoyed because of this.
Will Nokia make any update in the next firmware update to give a autolock facility? Because of this, i am forced to install AUTOLOCK software and I dont like that too.Message Edited by bkar81 on 28-Sep-200708:08 AM

"Unable to Check Out File Error" Message

I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
Thank you!

I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

See Restore Original Smart Playlists.
tt2

Unity Connection 8.6 not able to forward from extension (dial out)

Dear all,
I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
Basically here is the request for which I'm having an issue:
- I'm making a menu with a number XXX (CTI Port) with a System Call Handler
- Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
- All the CTI Ports are forwarded to international numbers which are the final destination
So the flow is the following:
NOT Working
- XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
Working
- XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
If anyone have a clue about what I can do, I'll appreciate a lot ...
Thanks in advance
C.

Hi Taranjit,
The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
Kind regards
Christophe

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

Check this post, the dial assist is part of the iOS 7.1, according to page 49 of the iphone_user_guide
Make calls to your contacts and favorites while traveling abroad. (GSM) Go to Settings > Phone and turn on Dial Assist. Dial Assist automatically adds the prefix or country code for calls to the U.S.
This user had a similar problem and solved it by switching off the dial assist feature in Settings/Phone/Dial Assist
Re: How to save toll free no starts with 1800?

Unable to clear out the stock in SAP

Hi Expert!
Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old. Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
Thanks.

hi
do the physical inventory and adhust stock
1) Create physical inventory doc using MI01
2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
3) Post the doc in Using MI07
Note : Give the batch no if the material is activated the batch

HT4859 Last time I synced my IPad with my PC it migrated all my "Favorites" (about 100 folders) to the ICloud. I have searched and so far been unable to find out how to recover my "Favorites" list from the ICloud back to my PC. Any advice? Many thanks.

Hi, Last time I synced my IPad with my PC, it (unknown to me) migrated all my PC "Favorites" (about 100 folders) to the ICloud.
I have searched and so far been unable to find out how to recover my "Favorites" from the ICloud back to my PC. Any advice would
be appreciated. Thank you.

What did you do to get them synced to the Cloud. Would that procedure help me get my favorites synced to my iPad2?

MeetingPlace Express 2.1.1.2 Dial Out was not Successful

I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
==============================================================
==============================================================
Call-Config Report
Summary
WARNING:The H.323 ID should match the host name
Valid E.164 Address has been configured
H.323 gateway has been configured
Error: Dial Out was not Successful
Call-Config Report Details
H.323 Details
H.323 enabled : YES
E.164 address : 196
H.323 ID : mpxadmin
H.323 gateway 1 : 010.145.002.030
SIP enabled : YES
DialOut Session Summary
VUI Configuration: 250 Sessions, 250 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 4.
Enter destination for your call: The Telephone Number is 196. Len is 3
Do you want specific ports? (t -- F): You entered f.
Placing Call .....Call was unsuccessful: Ring No Answer.
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 0.
==============================================================
==============================================================
That parameter could check?
Here I place information on the configuration of my network:
CUCM v.7.0 --> 10.145.2.10
Voice Gatweay --> 10.145.2.30
In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
Please expect your valuable help!
Thanks a lot!
ErnestoG

hi Ernesto,
As the problem you are facing is a dial out issue on MPE, go
through the checklist mentioned below in order to confirm the configuration
is intact.
Here is the checklist :
1.    Ensure that H323 GW is defined on CCM/CUCM.
Device > Gateway > find.
Look for a device name that equals either MPE's hostname, FQDN, or IP
Address.
2.    Ensure that h323 Gateways are configured on MPE.
MPE Administration Center > System Configuration > Call Configuration > H323
Configuration
Ensure that h323 is enabled.
Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
3.    Ensure that CCM's interface with MPE is up.
Ensure that MPE's IP Address is listed under the "IP Address" column.
Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
4.    Verify that MPE has the CSS required to call the destination.
FIRST, FIND MPE's CSS:
When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
Inbound
THEN the relevant config is under Device > "Call Routing Information -
Inbound Calls" > Calling Search Space
SECOND, FIND DESTINATION PATTERN's PARTITION:
If the destination is an IP Phone within the CCM/CUCM Cluster, then the
relevant config is under Device > Phone > click on Directory Number in CCM.
If the destination is a PSTN endpoint/phone, then the relevant config is
under Device > Route Pattern.
5.    Ensure that your user profile is set to allow outdials.
MPE Administration Center > User Configuration > User Profile Management >
Your User Profile > Can call out of meetings should be set to "Yes".
6.    When you place a call from from the CLI, the system applies permissions
from the "Guest" User profile since mpxadmin or root are not Users within
the MPX application. To allow this to work, you need to verify two
settings:
MPE Administration Center > User Configuration > User Profile Management >
Guest > Can call out of meetings should be set to "Yes".
Ensure that the Guest profile is not in a "locked" state.
MPE Administration Center > System Configuration > Usage Configuration >
Allow Guest outdials should be set to "Yes".
Hope this helps!
Thanks,
Karthik

"Unable to check out" error message in CS4

I have InDesign CS4, but do not have InCopy. When I exported an InDesign CS4 file to CS3 interchange format, and then tried to edit the orginal file, I got an error message saying: "Unable to check out this file. It may be in use by someone else." From reading the documentation, it appears that I inadvertently engaged a feature of InCopy, but when I go to the Edit->InCopy menu, the option to check the file back in is greyed out. How do I check the file back in so that I can edit it?

I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

Unable to fill out interactive form fields in the pdf form.

I'm unable to fill out interactive form fields in the pdf tax form in Reader 11.0.06 with purple bar inviting to do so.

The only Flash Player that is remotely connected to Adobe Reader is the plugin.
Can you temporarily uninstall the plugin (or both ActiveX and plugin using http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html and see if the problem disappears?
Reinstall both using these installers http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_text_4

Unable to dial out in China

Similar Messages

Maybe you are looking for