Unable to discover machines through SCOM after changing the IP range

Hello,
Last week in my company IP range was changed to class A network from class C network,before changing the IP range everything was working fine.but after changing the IP i am unable to discover any client machine through agent discovery and unable to install
agent over SCOM console
any help will be thankfull
regards,
angs

pinging is happening from both the servers from MS and client pc.
but from ms am not getting the server name if using -a command in front of ip.
nslookup is resolving.
recently in my firm the primary dns server is changed,i checked in dns host entry.management server is
registered perfectly
regards,
Nikhil

Similar Messages

  • HT4859 I am unable to recover a rented movie after changing one iPad for another. Music and books were easily restored

    I am unable to restore a rented movie after Changing out my iPad for a new one. All music and books were restored easily

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

  • Will SQL Server work after changing the Machine's SID

    I have a base VM which has SQL server and a SharePoint Farm, After changing the SID of the Machine Will SQL Server and SharePoint Work ?

    Hello,
    Changing SIDs may cause some Windows functions to fail as mentioned on the following post:
    http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx
    Tools like SysPrep that change SIDs are not supported on all SQL Server features:
    http://blogs.msdn.com/b/kenkilty/archive/2013/02/22/sql-server-2012-sp1-cu2-sysprep-gotcha.aspx
    http://blogs.msdn.com/b/petersad/archive/2009/12/17/sql-server-2008-r2-sysprep-step-by-step.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • After changing the context path, felix console, I can not checkout content via vlt.

    Hi everyone,
    I have the following issue. After changing the context path, via felix console, I can not checkout the content via vlt. Before that, I could checkout without any problems.
    I am using CQ5.5, CRX2.3, context path: /Test
    That is what I am trying:
    vlt -v --credentials admin:admin co http://localhost:23310/Test/server/crx.default
    Connecting via JCR remoting to http://localhost:23310/Test/server
    [WARN ] Authentication required to access repository descriptors
    [ERROR] checkout: com.day.jcr.vault.vlt.VltException: Unable to mount filesystem
    caused by: javax.jcr.ItemNotFoundException: Not Found
    caused by: org.apache.jackrabbit.webdav.DavException: Not Found
    Other versions I tried:
    vlt -v --credentials admin:admin co http://localhost:23310/crx
    vlt --credentials admin:admin co http://localhost:23310/Test/server
    vlt --credentials admin:admin co http://localhost:23310/Test
    vlt --credentials admin:admin co http://localhost:23310/Test/crx
    To verify if I could connect to the instance properly I started CRXDE
    and try to connect to "http://localhost:23310/Test"
    After click the ok button I got that error:
    No file system is defined for scheme: jcr
    Part of the .log file (.crxde):
    eclipse.buildId=unknown
    java.version=1.6.0_37
    java.vendor=Apple Inc.
    BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=de_DE
    Framework arguments:  -keyring /Users/peterwimsey/.eclipse_keyring -showlocation
    Command-line arguments:  -os macosx -ws cocoa -arch x86_64 -keyring /Users/peterwimsey/.eclipse_keyr
    ing -showlocation
    !ENTRY org.eclipse.core.resources 2 10035 2012-11-25 19:01:19.268
    !MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to
    recover changes.
    !ENTRY org.eclipse.osgi 4 0 2012-11-25 19:04:14.363
    !MESSAGE Application error
    !STACK 1
    java.lang.reflect.InvocationTargetException
            at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121)
            at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62)
            at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
            at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau
    ncher.java:110)
            at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav
    a:79)
            at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
            at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
            at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
            at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
            at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55)
            at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50)
            at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65)
            at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107)
            at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350)
            at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100)
            at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6)
    Any tips or hints are welcome.
    In the case you need more information, just leave a note.
    Thanks in advance for your help.
    Best regards,
    Peter

    The VLT works fine with the above URL change but How to fix "CRXDE" Initialization error if a context path is defined?
    I have a context path defined /Test and when I am trying to login to CRXDE with URL as http://localhost:4502/Test, I am getting below Initialization Error.
    Any workaround as Which URL should work while logging to repository (with context path) using CRXDE 1.0.1
    eclipse.buildId=unknown java.version=1.6.0_06 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments:  -os win32 -ws win32 -arch x86 !ENTRY org.eclipse.osgi 4 0 2013-04-25 17:50:23.802 !MESSAGE Application error !STACK 1 java.lang.reflect.InvocationTargetException at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121) at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
    at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55) at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107) at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350) at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100) at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6) at com.day.cq.ide.init.SetupWorkspaceOperation.execute(SetupWorkspaceOperation.java:119) at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:106) at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800) at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:118) ... 13 more Root exception:
    Thanks.

  • Language of Webdynpro after changing the Portal Language

    Hi All,
    Even after changing the portal language from for ex. English to French, the webdynpro is still displayed in English language.
    If this session (portal window) is closed and new portal session is started, then the webdynpro is displayed in French.
    Also please note that, for iviews built using Portal HTMLB (like JspDynPages), restarting the session is not necessary.
    Any answer/solution/pointers/SAP Notes supplied is greatly appreciated.
    Regards,
    Rajit

    Hi,
    Refer to SAP Note 947081 about Internationalization
    The Blog at /people/bertram.ganz/blog/2007/01/08/the-top-12-hottest-sap-notes-every-web-dynpro-java-developer-must-know talks about this Note.
    3rd point mentions about "Language change in the portal (through portal personalization) does not get immediately reflected in the Web Dynpro iViews?"
    Hope this solves your query.
    Kind Regards,
    Nitin

  • I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

    I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
    I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
    Thanks in advance.

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • PDF in Word after changing the old PC

    How can I use the Adobe ExportPDF after changing the crashed and old PC

    Hi Zis,
    I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
    Please let us know if you need additional assistance.
    Best,
    Sara

  • No effect after changing the message mapping

    Hi everybody,
    i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
    Should it be a cache problem? Where can i delete the caches?
    regards,
    Sid

    Hi,
    I guess there can be two things.
    before going to the tcode sxi_cache...
    Please go to the IR, Click Environment, Cache Notification and then select author as your id.
    Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
    Now press refresh.
    I guess this will resolve your problem

  • ORA-12545 error after changing the host name as IP address in Tnsnames.ora

    HI,
    I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

    12545, 00000, "Connect failed because target host or object does not exist"
    // *Cause: The address specified is not valid, or the program being
    // connected to does not exist.
    // *Action: Ensure the ADDRESS parameters have been entered correctly; the
    // most likely incorrect parameter is the node name. Ensure that the
    // executable for the server exists (perhaps "oracle" is missing.)
    // If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
    // host name to a numeric IP address and try again.
    Seems you specified wrong IP address.

  • Poor Printing quality after changing the catridges

    After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
    regards,

    Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • EXIT after changing the document status to Parked and complete

    Hi,
    I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
    I will really appreciate your help.
    Kuntal

    Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
    Activity History.
    The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
    This error message does not explain much. I followed all the steps in document# 397364.1
    Don't know why it should end in error and how it can be fixed?
    Any more ideas?
    Thanks

  • Interface getting failed after changing the Business system to that service

    Hello All,
    Our Env... is XI 3.0 and this is related to produciton env.
    Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc).
    After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in  the system.
    The steps which I have followed to change the Business system.
    1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
    2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
    3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
    Then i saved the changes and after that i have activated that interface.
    After that when i logged into CC monitoring and viewed that service channels and see the following errors:
    Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
    Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
    Awaiting for your reply.
    Best Regards
    Rakesh Reddy

    Hello Nisar
    Thanks for the update,
    Let me say few points  about this particular problem:
    1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
    And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
    2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
    3>As mentioned by you , I have checked all the points mentioned
        i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
       ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
       iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
    I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
    It says that:
    RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
    Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
    If any information required , I can provide that.
    Best Regards
    Rakesh Reddy

  • MG3100 Cannon Printer, after changing the black prints misallied, and I have manually aligned??

    After changing the black ink cartridge on my Cannon MG3100, when I print word and from the internet the prints are all misaligned and I have manually done the print head alignment, print alignment values, cleaned the nozzles, cleaned elements and clenaed the roller. I even brought the ink cartridge back to Staples thinking it was defective, but it still will not print correctly, does anyone have any answers please? Thank you! DD

    Hi DD,
    If you have replaced the ink cartridge with a Canon genuine ink cartridge and have already performed both automatic and manual print head alignments as well as cleanings and are still experiencing alignment issues, the printer will require servicing.  Please Contact Us for your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for