Unable to display customs document in SAP GTS

Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,

Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards,

Similar Messages

  • HR authorization for Display the documents  in SAP DMS

    HI experts,
    We want to control display authorization depending on the entry made in object link tab in DMS( DOcument Management System). We developed screen for HR master object link. When user executes cv03n and enters document No. system should check hr master number entered in object link. If the user has authorization for that hr master number in PA (personnel administration), then he should be allowed to display the document. Otherwise it should restrict him to display the DIR.
    Now my query is how to achieve it. Can anybody provide me some solutions
    I have one solution, whenever user enter document number in cv03n screen, system will first check hr master number entered in object link and it will check the Personnel Area, Employee group and employee subgroup aginst this hr master number. Say for ex: PA:1000, EG:1 and ESG:01 for HR number xyz.
    Now system should check in roles assigned agaist user id for these PA, EG and ESG values. If user has got authorization for PA:1000, EG:1 and ESG:01 in HR roles,then he should allowed to display the document.
    Now my query is how feasible this approach? is this tough task for abaper? or is there any easier approach than this.
    regards
    sham

    Hi,
    Try to use the User Exit: CNEX0002.
    Check with your ABAP er for the enhancement.
    Hope it helps..
    Thanks!!!

  • How Do I Display Custom Document Properties On the Info - Properties Page

    Hi,
    I want to create a template using Microsoft Word 2010 that has fields similar to the Standard Document Property "Title" that can be used as a fillable form that repeats data throughout the document.  I need a custom document property field
    that you can fill out on the title page and will simultaneously change the same field that is in the header, footer, and file -> info -> properties page. 
    For example, I want to create a document property field called "Product ID #" that shows the title of the property on the file -> info -> properties page as "Product ID #" and the content to show up as the information
    a user entered into the field on the first page.
    Right now I have a standard document property that I am using as a field on the front page for the Title which has user defined content on the front page.  This field has default content I set up to be "Product Specification Template". 
    I inserted this field by using quick parts.  I want to be able to create a field that behaves like this called "Product ID #".  I understand you can create custom form fields that repeat using legacy fields, but I need a way for them
    to show changes instantly after you click away from the field, without having to "update field" where necessary.
    Anyone have any idea how to create custom document properties like this? Or even how to rename standard properties such as "Status" or "Subject"?
    Thanks

    What you're asking can't all be done without a macro. You can easily enough get body content to show in the header & footer via the judicious use of Styles and STYLEREF fields (and the changes are dynamic), but getting that info into the custom
    document property would require a macro. To that end, you might use a content control with a unique Style applied to it for the data input and a ContentControlOnExit macro to update the custom document property.
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • Error displaying archivlink document: HTML-Control DP_ERROR_GENERAL

    Hi all,
    i am getting an error when displaying an archivlink document with the FB "ARCHIVOBJECT_DISPLAY". The FM "ARCHIVOBJECT_STATUS" shows that the document is online.
    What are other options to display this document in SAP? OA_FIND is not customized here.
    What is the cause of this error?
    Mimetype: text/plain; charset=utf-16be
    Where can I check?
    Thanks

    Dear All,
    We have recently upgraded our Support Packages of SAP_BASIS from SAPKB70014 to SAPKB70019.
    We are facing some issues related to Archive Link in Thin client.
    I am able to attach TIFF/PDF documents using Store Business Documents successfully but when I try to view the document by double clicking on Attachment List, I am not able to view it in SAP WEBGUI
    The Viewer is opened but no document is loaded.
    We have also  implemented SAP note 1556590 and rechecked the issue by double clicking  the document but all in vain.
    Can anyone tell me whats the issue? And Whats needs to be done to correct the issue?

  • The Error doesn't display file on the SAP screen

    Dear experts!
    Now, I'm getting some Issues about displaying file on SAP Screen use 2D Viewer or 3D Viewer.
    - The first, I Created document for WBS.
    - Second, I want to display the file on SAP screen. But the system opened it's by an application on client.
    How do I have to do?
    Help me, please!
    Best regards, Huy

    Hi,
    As I understood you attached a file to WBSE and that file
    is not showing in the project structure.In standard it doesn't show
    in the project structure. With DMS & CAD (2D,3D viewer) integartion it is possible to
    display the document in SAP screen.
    If my understanding is wrong you can elaborate your post and do revert.
    Regards,

  • Organization management customizing document

    Hi mate
    Can anyone send the customizing document for SAP HR-Organizational management (if its with personnel time managemen that will be great) to [email protected] or paste an URL.in reply
    replies Will be rewarded
    cheers & thanks
    Chellam

    close it

  • Number of custom documents

    Hi,
    I have some custom documents (xls, doc, ...) in my application.
    Now i would add a new document, but the following error message appears:
    "Load of document failed. Unable to add custom document. Your system administrator has limited the number of custom documents to %0. You currently have %1 documents saved for this application."
    Whats wrong or where can I modify this setting??
    Thanks!
    V11.1.2.1

    Hi,
    See if this works
    MaxCellTextSize
    8000
    MaxNumDocAttachments
    -1
    MaxDocAttachmentSize
    -1
    Regards,
    S

  • Custom Document & Custom Doc Legal Control Extraction into SAP BI

    Dear All,
    After all the business content for GTS was activated in GTS and SAP BI, the following configuration steps were taken in GTS to extract this data into BI for
    reporting:
    [1] Integration with Other mySAP.com Components > Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer [Used ECC as guide]
    [2] Global Trade Services > General Settings > Organizational Structure > Control Settings at FTO Level for SAP NW Business Intelligence (BI) 
    Inserted new records missing when comparing to Assgmt of Feeder System Grouping Org.Units to LLS Org.Units table [/SAPSLL/TCOOGS]
    Turned on BI Active flag for all records  
    [3] Global Trade Services > General Settings > Document Structure > Define Document Types for Application Areas
    For each document type in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
    [4] Global Trade Services > General Settings > Document Structure > Define Item Categories for Application Areas
    For  each item category in all the folders, turned on ‘transfer to SAP  Netweaver Business Intelligence Active’ flag where it was available to be turned on.
    Focusing on custom document and custom document legal control extractors, the data comes from /SAPSLL/CUIT which contains 113K records in development, however, the amount of data extracted into BI is minimal.  So I have a few questions:
    Did I miss any additional configuration swithces to extract into BI?
    SAP Documentation: You have entered a unit of weight in the table for GTS: Control Settings at Foreign Trade Organization Level. This unit of weight must be the common unit of weight that you want to be used in strategic reporting in BI . The values in the fields for gross weight (WEIGR), net weight (WEINE) and unit of weight (WEIDI)
    depend on the unit of weight you maintain at FTO level in the IMG for converting weights for SAP BIDoes each FTO need to be insert with different unit of measure?  ie FTO123 UoM = EA; FTO123 UoM = CS; FTO123 UoM = KG
    Should all the data records from /SAPSLL/CUIT be extracted into Custom Document DSO [0SLL_DS01]? If no, why? If yes, refer to pt 1 and what am I missing?
    SAP Documentation: Only data that belongs to the legal controls for the following legal regulations is transferred to BI:
    German Foreign Trade Laws
    Prohibitions and Restrictions
    Other What is the significance of these legal controls that SAP has decided to only transfer this type into BI? If the client want additional legal controls, would it be possible to extract them into BI?
    If anyone is currently using the std content for BI reporting, any assistance with my questions would be appreciated.
    Sincerely,
    Claire

    Hi Claire,
    Your customizing looks correct. But the amount of data extracted depends on your condition you have defined during extraction(e.g. Creation Date)
    Also in the coding only /SAPSLL/CUIT~ITSTA = space (Standard Item) and A (Item is allocated) is considered in 0SLL_CD_1.
    You could find out reason by debugging to find out exact reason.
    T-code: RSA2 , Enter Data source : 0SLL_CD_1. Then click display.
    Click Extract check ( Shift + F8 ) and put break point in coding FM : /SAPSLL/BW_GET_CD_1
    Best regards,
    Vincent

  • Display blocked document SPL - unable to to SPL check

    Dear friends,
    I have a blocked sales document in "Display Blocked Documents" in SPL area. I can search on the reference number and i got one record. I selected that and try to "Start SPL screening". It says "Unable to select any data (see long text)". Can you please tell me what could be the problem.
    thanks in advance.
    Thiru...
    Edited by: thirumal gunukula on Mar 5, 2009 2:54 AM

    Hi Thiru,
    please check your customizing:
    TA spro->GTS -> Compliance -> SPL service- > Control setting for SPL -> Document screening strategy.      
    You can select if you want to rescreen all addresses or only changed addresses.
    I assume that the address was not changed manually but system is defined in that way...

  • Help on Customs documents in GTS

    Hello Experts,
      We want to activate the material classification in GTS and then print customs invoice based on the list price.  To activate this do we need to implement Customs Management module?  Can any one advice on this?  Thanks in advance.
    with best regards
    K. Mohan Reddy

    Hi Mohan,
    Just to clear your douts and give you a big picture so that you can decide yourself
    Under
    SAP Compliance Management comes:
    1. Embargo Check
    2. SPL
    3. Product-Related Check (Legal Control)
    Where as Under
    SAP Customs Management Comes:
    1. Customs Processing (this service supports specific electronics customs declaration procedures and the printing of customs documents)
    2. Transit Procedure
    As per my understanding you will have to use the above two services
    Thanks,
    Prarit

  • Display/Edit custom document attributes in PC-UI

    Hi CRM Fellows,
    we've customized via transaction DMWB - Document Modelling Workbench some additional attributes for the documents derived from Class CRM_P_ORD and CRM_L_ORD. Via the GUI in Transaction CRMD_BUS2000126 - Activities we can upload documents and maintain this attributes. But our client uses PC-UI and we try to show this attributes there. Unfortunately the Structure CRMT_BSP_CM_1O used to display the documents does NOT contain our required fields.
    Has anyone come around such a problem? Is there a solution without modification? We have tried EEWB but there is no Object Type for the document management.
    Hope anybody can help.
    Regards
    Robert

    Hi Robert,
    i have the same problem. We need this attributes for documentaiton purposes:
    Author, Source, Valid until
    I've created this attributes via transaction DMWB in the PHIO Class CRM_P_ORDER_V. In the SAP-GUI Transaction CRMD_BUS2000126 i can maintain this attributes.
    Now it comes to PC-UI. The screen structure of the document management does not contain this fields. So I've created my own structure which includes the standard structure CRMT_BSP_CM_1O and my own structure. I've copied the access class CL_CRM_BSP_AM_CM_1O to ZCL_CRM_BSP_AM_CM_1O and did the customizing.
    Now I see our custom attributes in the personalization of the Content Management but the Fields are not visible in the Table.
    I think the problem is caused by the class CL_CRM_BSP_CM_SC which calls the access class. As far as I've seen in debugging it restricts the display to the content management standard fields.
    What can we do? Is the only solution to include SAP-GUI via SAP Transaction IView? I hope not.
    Regards
    Gregor

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • ICI - How to display custom error messages in SAP CRM

    Hello,
    we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
    The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
    Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
    We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
    them to screen.
    Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
    running in the background.
    Regarding to this topic we've the following questions:
    - Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
    - Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
    Thank you in advance!
    Best regards
    René Holy

    NewUser7 wrote:
    Please correct me if I am wrong
    I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
    HTH

  • Unable to display tree view; Error when parsing an XML document (Premature end of file.)

    Hi folks,
    I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
    Unable to display tree view; Error when parsing an XML document (Premature end of file.)

    kalyan,
    There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
    Mutti

  • How to see output in GTS for Customs documents

    Hi experts,
    could you please let me know how to see outputs for customs documents like origin of certificate for US. (ex: like in SD to see order output VA02 then goto issue output)
    let me know the Path or Transaction code to see output on system.
    Regards
    Reddy

    Hi
    Follow the path:
    Customs Processing - Import/Export>Monitoring>Customs Import/Export Declaration>Display Available Customs Export/Import Declaration>Communication Tab
    Or try
    T-Code: /SAPSLL/CL_CUS_03
    Check for Certificate of Origin
    Regards
    Vivek

Maybe you are looking for