Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor

Dear All,
I am frequently getting following error message on aspx pages on my SharePoint 2007 environment
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor such as Microsoft Office SharePoint Designer.
If the problem persists, contact your Web server administrator.
Upon refreshing and restarting the browser several times, this error message temporarily gone and everything becomes fine. But after some time same error message starts appearing again. Also I have noticed that this error message also appears
while working with SharePoint Designer 2007.Any clues how to resolve this issue ?
Any help in this regard will be greatly appreciated.
Muhammad Tariq khan

Hi All,
As I regenerated the problem (Unable to display this Web Part... ) from the faulty
user. I experience following error message in the ULS logs...
Error while executing web part: System.Data.SqlClient.SqlException: Invalid object name 't5_sco'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler,
SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()     at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)     at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior,
Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior)     at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean& bSucceed)
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback(String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback,
ISPDataCallback pSchemaCallback)     at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback(String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter
pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pSchemaCallback)     at Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData()     at Microsoft.SharePoint.SPListItemCollection.get_Count()
at Microsoft.SharePoint.WebControls.SPDataSourceView.ConvertToIEnumerableWrappers(SPBaseCollection items, Int32 firstRow, Int32 rowCount, String[] fieldList)     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteSelect(DataSourceSelectArguments
selectArguments)     at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)     at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal()
at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator()     at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator(IDataSource datasource, Boolean originalData)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String
viewPath)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform()
What does this error message mean ?
Muhammad Tariq khan

Similar Messages

Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.

We unable to display web part. It shows below error web part error:
Error while executing web part: System.Xml.XmlException: Root element is missing.     at System.Xml.XmlTextReaderImpl.Throw(Exception e)     at System.Xml.XmlTextReaderImpl.ParseDocumentContent()     at
Microsoft.SharePoint.WebControls.XmlUrlDataSource.FetchData(String requestUrl)     at Microsoft.SharePoint.WebControls.BaseXmlDataSource.Execute(String request)     at Microsoft.SharePoint.WebControls.BaseXmlDataSource.GetXmlDocument()
    at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal()     at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String
viewPath)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
could any one give me solution on this.
Regards
Ravi kumar
ravi sharepoint

HI
I got below error in that webpart.
5/28/2014 6:21 AM
w3wp.exe (0x1F04)
10176
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=38.95746526444
5/28/2014 7:04 AM
w3wp.exe (0x1F04)
10452
SharePoint Foundation
General
High
The user does not exist or is not unique.
5/28/2014 7:04 AM
w3wp.exe (0x1F04)
10452
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (DataBinding DataFormWebPart (MCH Projects View Web Part)). Execution Time=1696.60494560063
I got below logs message sharepoint log investigation tool.
Let us know any suggestions on this.
ravi sharepoint

Firefox cannot load pages that other browsers can, but the 'help' page for this issue did not fix the problem.

I am troubleshooting an issue occurring on a family member's pc. Immediately after changing their "search" settings from "Yahoo search" to "Google search", they found that Firefox was unable to load any webpages. After troubleshooting the problem, I found the "Firefox can't load websites but other browsers can" help page, and attempted each of the solutions listed. None of those solutions fixed the issue. Also, I uninstalled and re-installed Firefox; the issue persists. However, the 'new' version of Firefox remembered the tabs left open when the 'old' version was deleted, so some temporary files likely persisted.
Are there any other steps that can be taken, or is Firefox on this computer no longer an option?

Start with this;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}
If there is still a problem, go to that computer and do this;
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.'''

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favor

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Cannot get URL web part filter to pass Parameter to List web part

How do I wire an out-of-the-box URL web part filter to a SharePoint 2013 list (or "app" as renamed in 2013) web part when the list has a parameter?
My SharePoint list uses a parameter because it needs a Contains filter, as in
     <Where>
      <Contains>
       <FieldRef Name="MyFieldName"/>
       <Value Type="Note">{MyParam}</Value>
      </Contains>
     </Where>
The ParameterBinding is defined simply.
<ParameterBinding Name="CohortParam" DefaultValue=""/>
It has had Location="None" in the past, but another forum entry that I read suggested removing that.
When I add the list (or "app" in SharePoint 2013) to a web part page and also add a URL Filter web part, the URL filter cannot see the parameter. The menu chain Connection >> Send Filter Values To >> [My List web part name] shows
the dialogue. On the "Choose Connection" tab, I choose "Get Parameter Values From". Clicking the "Configure" button results in the "Configure Connection" tab having the message "The Consumer Web Part did not
provide schema information".

Hi Randy,
You need to change the "MyParam" to "CohortParam", for parameterbinding element we need to add the location attribute as below codeline, then when we use the QueryString "CohortParam" with value in url, it will directly
filter the list web part items without adding URL Filter web part.
<ParameterBinding Name="CohortParam" Location="QueryString(CohortParam)" DefaultValue=""/>
I attached my resutls as below image (also "MyParam" can be changed to "CohortParam" if you want), you can take a look.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

Moving this discussion to the Adobe Creative Cloud forum.
Cock please try a different web browser. If you continue to face difficulties then you can contact our support team directly at Get help with orders, refunds, and exchanges.

Sharepoint 2013 explorer view error - problem opening this location in file explorer (HTTPS + Win7 Enterprise 64 bit + IE9 32 bit + Office 2007 32 bit)

Hi,
We have a problem using Sharepoint 2013 explorer view. (Error - We're having a problem opening this location in file explorer. Add this web site to your trusted sites list and try again).
I'm using Windows 7 Enterprise 64 bit, Office 2007 32 bit and IE9 32 bit. And the sharepoint site is a https site.
Some people in my organization are able to browse and some users getting the above error. (with the same client machine configuration)
If I clear my browser cache, closes the browser and open it then the explorer view is working. But after a minute if I try again I'm getting the above mentioned error. This 1 minute expiration happens is since the first time I have used explorer
view, not since I opened the browser.
I have tried the following on my machine:
1. Modified the web client service to run automatically.
2. Verified the sharepoint site is part of trusted sites (https://*.spsite.com/)
3. Compatibility mode is turned on.
4. Tried adding
AuthForwardServerList in the webclient registry settings under parameters. (restarted the web client)
5. Verified the BasicAuthLevel set to 1 (since we are using SSL). Tried setting the BasicAuthLevel to 2 as well. (restarted the web client)
6. Tried installing software update for web folders (KB907306).
Verified the below on the production server:
1. The web application has the root site collection.
2. It has WebDav Publishing disabled under IIS Web Server feature.
Could some one please help me in resolving this issue?
Thanks.

Hi Deepak,
According to your post, my understanding is that you failed to use "Open with Explorer" in a document library.
For your issue, please verify the following:
ActiveX controls must be enabled in IE.
As you are using Windows 7 Server as the client computer, you must install the Desktop Experience feature from Server Manager.
Make sure there is a working Root site collection.
Install this hotfix for windows 7 work with sharepoint 2013 :hotfixv4.microsoft.com/.../463266_intl_x64_zip.exe
Best Regards,
Eric
Eric Tao
TechNet Community Support

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

ERROR: The operation could not be performed because the file can't be accessed or doesn't exist. Please contact your web developer to correct the problem.

Only on one page, the client is receiving this error:
Error - The operation could not be performed because the
file cant be accessed or doesnt exist. Please contact your web
developer to correct the problem.
I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
??? Any ideas ??? Anyone else had this happen?

Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!!

HT3275 I get this error Time Machine attempts a backup. The backup disk image "/Volumes/Data/Barbara's MacBook Pro.sparsebundle" is already in use." Can anyone assist me in correcting the problem causing this? Thanks.

Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.

Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.

This is to sum up the problem. Here are facts :

This is to sum up the problem. Here are facts :
1. Java process size grows to ~ 3G and eventually exhaust native memory. Only
data segment of the process grows in size.
2. Java heap size remains stable, way under the max size. Perm generation
size is stable, way under the max size.
Here is a table showing evolution of Java process Virtual Memory
Start Monitoroing Java exited with OutOfMem
VmSize: 2764108 kB VmSize: 3094912 kB
VmLck: 0 kB VmLck: 0 kB
VmRSS: 1737364 kB VmRSS: 2020136 kB
VmData: 2461448 kB => VmData: 2792252 kB
VmStk: 216 kB VmStk: 216 kB
VmExe: 56 kB VmExe: 56 kB
VmLib: 301488 kB VmLib: 301488 kB
Plase note that Exe, Stack and Libs are the same at the beginning and the endof the period. Data segment increased for about 0.4G. The memory leak takes place in the native code.
Here is our log
     05/08/13 07:38:10 java.lang.OutOfMemoryError: unable to create new nativethread
     05/08/13 07:38:10 at java.lang.Thread.start(Native Method)
     05/08/13 07:38:10 at com.evermind.util.ReleasableResourcePooledExecutor.addThread(ReleasableResourcePooledExecutor.java:121)
     05/08/13 07:38:10 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor.execute(PooledExecutor.java:978)
     05/08/13 07:38:10 at com.evermind.util.ThreadPool.launch(ThreadPool.java:255)
     05/08/13 07:38:10 at om.evermind.server.http.AJPConnectionListener.run(AJPConnectionListener.java:74)
     05/08/13 07:38:10 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     05/08/13 07:38:10 at java.lang.Thread.run(Thread.java:534)
     Exception in thread "CompilerThread1" java.lang.OutOfMemoryError: requested 612052 bytes for Chunk::new. Out of swap space?

100M doesn't seem too extreme ... I ran a test program that created 100 sleeping threads, and ps -l reported the process size as 77M. I don't know Linux well enough to know the threading model (I suspect it's LWP-per-thread, which means that ps -m will give correct output).
However, given what you've shown (heap doesn't grow, process map does, failure occurs in code that starts a new thread), it really seems that your problem has something to do with too many threads.
My first thought, since I've seen it before is that there may be fragmentation of the memory map, such that there's no available segment when the JVM tries to allocate the stack for a new thread. When I saw this problem, the JVM (1.3 Solaris) was using a pretty naive approach to mapping those blocks, such that a few long-lived threads would cause it to run out of space. This information is available in the /proc/maps directory (man proc for more info).
There could also be some limit to the number of threads you can create. I know that Solaris returns ENOMEM when it's unable to create a thread; not sure what Linux returns.
Finally, I'm going to suggest again that you put logging messages in the thread factory that you're giving to the pool. Since you control that code, it's an excellent way to watch what's really happening at the time you run out of memory.

The problem is this: In the phase "Create Java Users"

Hello,
I am installing Solution Manager 4.0 Release 2 (with Red Hat Enterprise Linux Server release 5.1 and Oracle 10 and my java version is: j2sdk1.4.2_14) The problem is this: In the phase "Create Java Users" I get the next error
WARNING 2009-02-13 14:53:22
Execution of the command "/usr/sap/PTS/DVEBMGS00/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysnr=00 -c ashost=sap-vpmn -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code 2. Output:
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
INFO 2009-02-13 14:53:22
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2009-02-13 14:53:22
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2009-02-13 14:53:22
CJS-30196
ERROR 2009-02-13 14:53:22
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Thanks & Regards

Hi,
This problem normally arises with the wrong combination of JDK and OS and for the Linux machines, its better to use IBM Java instead of SUN java
I remember that I have solved this type of problem by using lower version of IBMJava2-AMD64-142-SDK-1.4.2-10.0.x86_64.rpm which is SR10. You can download this version from
http://www.ibm.com/developerworks/java/jdk/linux/download.html
go to download _12 and then just change the sr12 to sr10 in the header url....
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
with the higher versions of java for 64bit systems create serious stack over flow problems.....
what I suggest you is to start reinstallating SolMan after installing IBM java sr10 version...
Regards,
Naveen.

My Ipod touch is frozen. Shows USB cable with arrow pointing to Itunes. What is the problem? This is the second one I have had that has done this!

My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!

This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.

Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor

Similar Messages

Maybe you are looking for