Unable to distribute the MODEL to backend system in SRM 5.0

Hello Experts,
I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
Target system T90CLNT090       Commnunication error occurred, error when opening an RFC connection
RFC connections are
T90CLNT090   - SRM to R3
SRM_00_800   - R3 to SRM
Systems got connected successfully and I can "Remote Logon" too......
My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
Rgds !
SAP Novice

Hi Zuljana,
Kindly check if your partner profile is active. (Indicated by 'A')
Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
Regards,
Nikhil
Edited by: Pbponikhil on Dec 21, 2010 4:11 PM

Similar Messages

IDoc to IDoc scenario: distribute the model view

Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfuly created a message type and generated the model view in tcode BD64.
Question:
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
When I choose the receiver system ERP:200 and get the following error
Target system: ERP:200
Model view ECCCLNT100 has not been updated
Reason: Distribution model is currently being processed
When I try to choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Is that an error? If yes, how can I fix them?
Thank you very much
Thom

Hi
Look my reply on this thread regarding SYNC Message Type.
Re: problem while distribute model view
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI.

Error - Distributing the Model using BD64

Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.

you have to distribute the distribution model in its new version

Error in Distributing the model view

Hi,
I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
I am trying to set up the ALE customizing and distribute the model view.
I have created RFC from 600 to 610 and the test connection is fine.
I have created a model view in which i have given sender system as LS_600 and
receiver system as LS_610 and the message type as MATMAS.
In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
i have given a port which uses the RFC to 610.
When i have tried to distribute the model view it is giving error as
'communication error occured. Username or password is not correct (Repeat Registration).'
I am not able to figure out the error.
There is also a partner profile as ls_600. Do i have to
make any changes there ?
Do i have to do something in the client 610 ?
Your help is highly appreciated.
Thanks,

Hi Prasad,
Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
And let me know if you are able to distribute the IDoc or not.
If you get the error. Please let me know the error.
Regards,
Krishna

Automatic Replication of Vendors from SAP R/3 Backend System to SRM System

Hi All,
I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
I have checked in the SPRO settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also" under Vendor Synchronization with Make Global Settings I hope.
If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
Awaiting for your early reply .
Regards
Annette

Hi
Please try this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
Regards
- Atul

Ideas as a backend system for SRM

Hi All,
Please tell me wether I can use( r/3) ideas system as a backend system for SRM System.
Thanks & regards
SATYA

You can do that. Can connect an IDES(ECC) to SRM
Thanks,
Surya

How is goods receipt and invoice sent from backend system to SRM system?

Hi friends
How is goods receipt and invoice sent from backend system to SRM system?
Thanks
regards
Krishna

Hi Khan
BBP_GET_STATUS_2 and Clean_recrec_Up are background jobs to sync ecc and ebp.
BBPIV and MBGMCR are used to send goods receipt and invoice from srm to backend system
So we dont require any special idocs to send goods receipt and invoice from ecc to ebp.Are all handled by BBP_Get_status_2
Regards
Krishna

Unable to create a PO(in backend system) in ECS

Hello all,
I used the FM BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE to create a shopping cart in ECS scenario.
The problem is I am unable to create a PO in the backend system for the shopping cart. I am also getting the message 'Vendor 3000014598 not intended for purch. org. Ref: MM Purchasing Org'.
Please help me in this context.
Thanks,
Vishnu

Hi,
The problem with organization structure , Please check your organizaiton structure.
Change company code /Pur.org Separatlly it will work.
while replicating vendor please select the flag 'with out reference to back end pur.org' and choose local purchasing organization.
refer this link
Vendor xxxxxxx not intended for purch. org. xxxx Purchasing Organization
Thanks
prasad .s

Incorrect distribution -Error while distributing GOA to R3 Backend system

Hi,
We have installed SRM server 5.5 and implementing contract Management
scenario with backend system R/3 4.6B.
In this scenario we are creating a Global Outline Agreement in SRM
system and distributing it to the back-end ERP system.
In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
are failing to distribute to R/3 system v4.6b
We are getting this error message in SRM transaction SLG1: -
The error ocurred by processing event RELEASED_NEWLY with GUID
DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
NOT FOUND"
The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
The condition types are mapped in SRM
Pls suggest.
Regards,
Avinash

Hi Avinash,
In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
By using the BADI you can define which document to be created in the backend.
BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
Check for the transaction types (GCTR) and the number ranges for the transaction types.
The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
Also refer the below SDN thread in this regard :
Re: Scheduling Agreement from GOA
Any further clarifications are welcome.
Award points for suitable answers.
Rgds,
Teja

WhAT Is distributing the model

Hi All
Can anybdy plzz explain me what do we mean when we say we distribute the distr model in bd64?

Hi
The distribution model describes the ALE message flows between logical systems.
Use
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
Structure
In the distribution model you can specify the messages to be sent to a given logical system. You can also define the conditions for the content and dispatch of messages in the filters.
The distribution model consists of one or more views that you can define. With more complex distribution tasks you can assign business sub-areas or groups of logical systems to separate views.
The relevant views of the distribution model must be available in all the logical systems involved in ALE. You can find the functions for distributing views in Customizing for ALE.
Hope this helps.
Regards
Sumit Jain
**Reward with poitns if useful

Configurations needed for distributing central contract to backend system

Dear Gurus,
I have configured central contract and getting approved in the local SRM system. Now, I need to distribute the central contract to the backend system. I have already get the PI interfaces configured using the integration scenario Central contract management.
Now, I assign the backend POrg as well as the target values for the backend contract and try to release the central contract. The central contract is getting released. However, no contract is getting created in the backend system.
I donot see any XML messages generated in the SRM system (SXMB_MONI).
Do I need to maintain some settings in the SRM system to enable the distribution of contract to the backend system?
Thansk and regards,
Ranjan

Hi,
When one creates Local Contract; there is one option named 'Distribute' on contract screen.On drop down; one mention back end system. After clicking on it; contract has been created in ECC.
If contract is not getting generated in back end; refer SAP Note: 609222.
Check whether you find any error/information message in Txn BBP_CTR_MON.
SRM Settings:
1. Implement BBP_DETERMINE_LOGSYS: Determines whether contract is to be created in SRM or ECC.
2. Assign transaction type to attribute CT_PROC_TY in Org Structure.
3. Check whether have maintained message type BLAREL, COND_A, BLAORD.
4. Assign role SAP_BBP_STAL_START_PURCHASER to process contracts.
Helpful SAP Notes: 641919, 646903
Regards,
yaniVy
reward if helps

To send image to a VC model from Backend system

hi Experts,
Is it possible to send images from backend system to the VC model ?????
If yes then how?
Regards,
Sanjyoti.

Yes, it's possible.
In our employee search model we've programmed a BAPI to return a picturelink to a picture of the employee as a simple text string. This is then mapped to an ordinary HTML view which only has one field: url.
In this case all the "hard" work has been done in the back end. I can't tell you exactly how the BAPI is programmed, but the pictures are administrated in transaction PREL and are stored in SAPs content server.
The links look like this: http://host:port/sap/bc/contentserver/300?get&pVersion=0046&contRep=Z2&docId=45C1AECE313D60D9E1000000C1A19044&compId=DATA
If you look at BAPI BAPI_EMPLOYEE_GETDATA (which we have based our new z-bapi on) you will see the docID field values returned from port ARCHIVELINK (field: ARC_DOC_ID).
Henning

Error while distributing the model

Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanks

Hi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered>

Unable to define connector for multiple backend systems in BRM

Hi,
I am on GRCFND_A V.11 and SP04
I have multiple backend systems integrated with GRC box. So far I was using one backend connector as default one for role maintenance but it is not feasible if you have to create roles in variuos backend connected systems. I know one way to do so, i can keep changing the default connectors whenever i need to create roles but that is obviously not at all the onw any one would like to go with.
So, I tried to create unique connector groups for every individul backend connectors. But the issue is, the moment i assign the backend connector to the respective connector groups, the same gets reflected to other connector groups as well. So, whenever i either add or delete some of the connectors to any connector groups it gets modified/changed from all of the connector groups.
These are the backend connectors where i have to create roles from BRM whenever needed.
These are the connector groups:
I followed to the ink: GRC AC 10 BRM: Default Connectors with Multiple Back-end R/3 Systems , which is the same as mine issue, but not able to come to the solution point.
would appreciate for your quick response.
Thanks,
Ameet

Could anyone suggest solution to the above mentioned issue please?

Unable to create the model in designer

Very new to ODI, I have setup the master rep in Oracle 9i database. The working repository is also created there. But I am unable to create a model with Oracle techology as it doesnot give the Logical scema. May I request a solutions for the newbee.

Managed to solve the problem right now..
For new ones who would like to use Oracle 9i as master repository and working repository please check the following steps before continuing.
create the master repository on Oracle 9i database server
Make the agent server running
Launch the topology manager and create a new login for the master rep.
Login to TM.
create the working repository from topology manager. Physical Architecture -> Oracle -> right click -> create data server.
Now login to designer and create the model.
let me explore more and would revert back again.
check again at avisolutions.blogsopt.com

Unable to distribute the MODEL to backend system in SRM 5.0

Similar Messages

Maybe you are looking for