Unable to do Audio Editing in Adobe premium pro cs3 in windows 7 Machine

I am using adobe premium pro cs3 on Windows 7 machine.when I connect a camcorder using firewire port to the PC I am able to open the application and capture the video and edit the same but I am unable to hear the Audio hence cannot edit the same....Plz let me know how can hear the audio in this application so that I can edit the same....
My audio system for the PC ia working fine but in the application I cannot hear the audio....

I gave administrtative rights to the Local user.Even then the audio part did not work.I removed the administrative rights.
I found the answer
I opened a neew project then clicked on "Edit" then "Preferences" option,then "Audio Hardware" option,Selected "ASIO Settings" and then Selected "High Definition Speaker option"(Sync Enabled-Yes) and deselected "High Definition Speaker option"(Sync Enabled-No).
After making this changes I was able to hear the Audio and Edit the same.
Issue resolved.

Similar Messages

  • Proxy editing in Adobe Premiere Pro CS3?

    Hey all.
    I understand proxy editing is a method by which the user does all of his/her editing with lower quality footage, and then all of the edits/effects/transitions/etc are applied to higher quality footage when the project is rendered.  Does Premiere Pro CS3 support this feature?  If so, how do I use it?

    Perhaps, but not in my case.  I'm doing my editing on the following rig:
    Alienware Area-51 m5790:
    Intel Core 2 Duo T7400 (2.16 GHz, 667 MHz FSB, 4 MB L2)
    ATI Mobility Radeon X1900 (400 MHz Core / 470 MHz Memory, 256 MB, PCIe)
    4 GB (2 x 2 GB) DDR2-667
    Western Digital Scorpio Blue (320 GB 5400 RPM SATA)
    Western Digital Scorpio Blue (400 GB 5400 RPM SATA)
    Windows Vista Ultimate 64-bit
    It's a laptop, and I'm taking HDV footage from a Canon HV20.  It's not terrible at performance... but it's not as snappy as I'd like to see.  Hence why I'd prefer to do editing with standard definition clips instead of the HD clips.

  • How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

    Hi there,
    I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
    How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
    So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
    Any established hardware/convertor to recommend ?
    Thanks

    Ryan,
    For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
    One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
    Good luck,
    Hunt

  • Converting iMovie format to a format that I can edit with Adobe Premier Pro

    How can I convert iMovie format to a format that I can edit with Adobe Premier pro 7 program?

    Install the free flip4mac player and you'll be able to view it.

  • Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

    Hello-
    I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
    A quick comparison of systems:
    Mine:
    HP dc7700s desktop
    Windows XP OS
    Adobe Master Collection CS3
    Hers:
    IBM compatible laptop
    Microsoft Vista
    Adobe Premiere Pro CS3
    Adobe Photoshop CS3
    I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
    I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
    Thank you!

    >project will be opened in Desktop mode
    I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
    What is the codec and properties of the files in that project?
    Are you sure they are 100% standard?

  • Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs

    Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs too.

    This is a user to user forum.  We are not Adobe.  For pricing information, you need to contact Adobe Sales in India.
    Premiere Pro is just for editing video.  Photoshop or Photoshop Elements is for editing photographs.

  • Importing AVIs into Adobe Premiere Pro CS3 !!!

    Heres what Im trying to do: We have been working on a PC Leitch Velocity Q NLE system for the past couple years and just got 2 new Matrox Axio LE NLEs with Adobe Premiere Pro CS3. We are trying to get all our old projects from the Velocity system onto our Matrox systems and not sacrifice any of the video quality. I've been thinking that the best way to do this is by compressing old projects to AVI format from the Velocity system and move them over to the Matrox using an external hard drive.
    I was actually able to bring in an AVI from the Velocity system onto the Matrox yesterday using the same Velocity settings below, except that I changed the aspect to 720 x 480 and the audio sample rate to 48,000. When playing the video on the timeline in Premiere the video looked great on my computer monitor but on my external NTSC monitor all motion in the video looked a little jerky as if frames are missing. I tried importing the test clip into both Matrox uncompressed 8-bit and uncompressed 10-bit projects and had the same resulting jerky looking video. Even after rendering the clip the video looked the same. Then I tried exporting the clip to mpeg using the Matrox media encoder but saw no change in the jerky movement. Here are my project and export setting for both systems.
    The AVI was made on a PC Leitch Velocity Q NLE system. My project settings on the Velocity system are;
    29.97 drop frame
    720 x 486 24 Bit
    Interlaced field order B
    Sub pixel off Cropping off
    Audio:
    16 sample
    44 / samples / second
    2 channel
    Export settings are; (These are the settings I was trying the first time that didnt work. All I changed the second time was the aspect ratio to 720 x 480 and the audio sampling rate to 48.)
    AVI
    Frame rate 29.97
    720 x 486
    No Compression
    Color 24 Bits
    Field handling interlaced field order B
    Audio:
    16 sample
    Sampling rate 44
    2 channels stereo
    Do you recommend compressing the video coming out of Velocity?
    There are a couple other options other than No Compression in the export dialogue such as: Microsoft H.263 video codec, Microsoft H.261 video codec. I definitely want to maintain the highest quality possible.
    Matrox Axio LE project settings
    Editing mode: Matrox NTSC
    Timebase: 29.97 fps
    Video
    Frame Size: 720 x 486
    Pixel Aspect Ratio: D1 / DV NTSC (0.9)
    Fields: Lower field first
    Display: Format 30fps Drop Frame Timecode
    Audio: Sample 48,000 Hz
    Display: Audio sample
    Video Rendering: Maximum bit depth is Unchecked
    Previews: File format Matrox uncompressed 8-bit NTSC (tried Matrox uncompressed 10-bit too.)
    I think the jerky video might be due to dropping frames but Im not sure.
    Any help is greatly appreciated!

    While it seems that the field order is consistent, I have seen issues where converting from clips that change field order creates this sort of problem. This is particularly obvious when converting from MJPEG codecs like Meridien or Miro/Pinnacle to DV.
    What happens if you just import the files into Premiere and let it do the rendering to the project settings?

  • Adobe Premiere Pro CS3 3.2.0 update

    Thought I'd share a bit of information on the 3.2.0 update that will be coming out via AUM this morning. The update will come out first via AUM, then will be available on the updates page shortly after at http://www.adobe.com/downloads/updates/?ogn=EN_US-gntray_dl_updates.
    The readme will also be hosted at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html.
    Dave Helmly has posted about the update on his blog, as well: http://blogs.adobe.com/davtechtable/2008/04/xdcam_and_premiere_32.html#more
    New in this release:
    - This update adds compatibility with the Sony XDCAM range of cameras. This includes disc-based XDCAM and XDCAM HD cameras., and the newer SxS-based XDCAM EX cameras. Content from XDCAM cameras can be imported and edited natively without transcoding or conversion. This makes possible similar workflows to Panasonic P2, including the ability to edit content directly from XDCAM EX cameras.
    - Note: Adobe Premiere Pro CS3 3.2.0 does not support IMX editing or XDCAM HD50 editing at this time. Export to XDCAM is also not possible.
    - Adobe Premiere Pro now has presets for HDV 24p. Note: Adobe Premiere Pro does NOT support print to tape in 24p mode.
    - Improved handling of MPEG streams (e.g.: HDV video), along with error detection. MPEG stream errors can occur during recording due to tape dropouts, record start/stop glitches, timecode breaks, etc. Bad frames caused by these MPEG stream errors are identified during import/indexing or playback. These frames will play back as full red frames to alert the user that there is a problem in the encoded video at that location. Adobe Premiere Pro will also log error messages to the Events panel, indicating where the error(s) were encountered in the stream. Users can open the Events panel, determine the location of the MPEG stream error, navigate to that location in the clip and take corrective action, such as trimming out the video glitch or covering up the red frames with duplicated good frames copied from before or after the glitch. Note: MPEG files will need to be re-indexed to take advantage of the improvements in Adobe
    Premiere Pro CS3 3.2.0. For more information, please see Working with MPEG Files.
    Notable fixes:
    - Titles/Footage no longer show up as offline when reloading saved projects.
    - Rendered preview files no longer missing when reloading saved projects.
    - Certain filters and/or transitions are now applied correctly when reloading saved projects, until the timeline is forcibly refreshed.
    - When exporting via the Adobe Media Encoder, there is no longer a long delay before the progress dialog shows and rendering resums (Mac OS 10.5.x only).
    - 24p HDV clips shot on a Canon XH A1 no longer come in incorrectly as 30 fps clips.
    - Creating an offline clip in the project window then attempting to link it to media on disk no longer results in the application crashing.
    - QT PAL movies rendered out of Adobe After Effects® software are no longer incorrectly identified as requiring rendering in a Adobe Premiere Pro PAL project.
    - DV Clips of certain specific durations are no longer incorrectly identified on the timeline as requiring rendering.
    - For P2 DVCPro clips, the right-most pixel column no longer contains video garbage.
    - Fixed a memory fragmentation problem that would occur with projects with many custom bin columns.
    - Fixed a bug where exporting to a QuickTime movie (with QT 7.4) would crash the application.
    - Selecting "display only exact name matches" when relinking clip no longer crashes on Leopard.
    - Fixed an issue where 30p and 30f HDV clips would incorrectly be identified as requiring rendering in a 29.97 progressive project.

    Harm,
    I don't use HDV, so I'm not sure if this is the case or not, but in the top post, there is mention of having to re-index the MPEG files "to take advantage of the improvements in Adobe Premiere Pro CS3 3.2.0." While it seems this should be an automatic process, maybe wiping out the previously-created index files (I seem to remember them being in the Media Cache folder when importing MPG files from DVD rips and such) would let the project open. Or, maybe the old trick of importing an existing project into a new one? Just a couple thoughts...
    To the other poster: surely, I don't jest. At least, not when it comes to anything in the video production industry and my operation in it. Long ago, I gave up expecting perfection from any particular piece of hardware or software, and just focused on being creative. That's why I got into this. I refuse to let any piece of equipment dictate what I can or can't do--I just find another way around. Funny how we managed to make it as a species and a civilization as long as we have, and now that computers are here to make our lives easier (*snort*), we're quick to raise our ire about everything that's wrong with them. That's why I will always marvel at things built long ago prior to the advent of all the technology we take for granted today.
    Anyway, we're all entitled to our opinions, and I've taken this thread completely off-topic. My apologies, so...

  • HDTV import in Adobe Premiere Pro CS3

    Hi all, I am a 3D animator and I am working right now in an animation where the client wants a High Definition resolution HDTV 1920x1080. When I finish my work and make the render, I went to edit in my Adobe Premiere pro CS3 and find with surprise that that preset does not exit!!! ...so my question is: How can I do for to import my targas sequence files 1920x1080 into Adobe Premiere???...there are some free plugin that fix this problem???
    Thanks in advance for any answer.
    Best Regards
    Boris.

    You would swear this kind of things is not
    in the manual. :)
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 300 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Final Cut Pro 7 keyboard shortcuts for Adobe Premiere Pro CS5 for Windows

    Attached is the file that contains the Final Cut Pro 7 keyboard shortcut set for Adobe Premiere Pro CS5 for Windows.
    This file was mistakenly left out of the Premiere Pro CS5 installer, so people who tried to switch to this keyboard shortcut set were unable to do so.
    Unzip the file and then install the .kys file by copying it here:
    C:\Program Files\Adobe\Adobe Premiere Pro CS5\Keyboard Shortcuts\en_US
    (where C:\ may be replaced by the a different volume if you installed somewhere other than the C drive, and en_US may be replaced by another locale ID)
    This file was included in the Premiere Pro CS5.5 installer, so manually installing this file is only necessary for Premiere Pro CS5.
    For information about keyboard shortcuts, including how to customize them, see this page:
    "Keyboard shortcuts"

    By the way, Mac users don't need to update this file, it's for Windows users only.

  • I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. W

    I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. When directed on Adobe's site to access the serial number, it takes me to an outside 3rd party site, which I tried but it does not actually work. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hey beccac85068042,
    Adobe will provide you the serial number only if you are a registered user.
    Please refer the following link to know more on registration for Adobe products:
    Adobe product registration FAQ
    You might Contact Customer Care and seek help on the same.
    Regards,
    Anubha

  • Trouble Importing MOV files in adobe premiere pro cs3

    Hi,
    I just bought a Canon 60D camera and I am using adobe premiere pro cs3 for the first time.
    I tried to import MOV file footages made by my Canon 60D, but it says that my files are not supported.
    I don't know what to do!
    Can someone help me?
    Thank you.

    Hi All,
    Let me tell you how I solved the XDV9 codec trouble on my Windows 7 system. The solution is rather stunning because I am using completely free software. First download the Shark007 codec pack for your system here: http://shark007.net/forum/Thread-Setup-and-usage . Please be aware that the codec pack installer comes with a toolbar install option so make sure you de-select this option during the installation process. After installation check the MOV tab on the "Settings Application" program. Make sure "use LAV's splitter" is selected for MOV Playback.
    Now comes the crazy part... To convert the XDV9 MOV video clips just download Windows Essentials Movie Maker for Windows 7. At this moment more info about this program can be found here: http://windows.microsoft.com/en-US/windows-live/movie-maker-get-started . Again, make sure to set the right settings during installation otherwise you will be installing a lot of possible unwanted crap like Windows Live Mail, Windows Skydrive etc.
    Movie Maker has quite good settings for converting (High Definition or custom settings are supported). Select your clip, or select multiple clips to create an unedited full length clip of all your clips, and then select "create movie". I used the "use recomended settings for this project" settings as it matches the source file resolution and frame rates etc. It is quite some work to convert clips like this but its the only free solution I could find so far.
    Good luck!
    Rodger

  • How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

    How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

    IMHO Windows would be the place to start.
    Why do you want to load CS5 for Windows?
    Adobe does produce a version of CS5 that runs on OS X so that it would not be necessary for you to have to screw around with Windows. Personally that would be the way to go and avoid the hassles of Windows.
    Allan

  • Adobe Premiere Pro CS3 image on student machines

    Hello! At the beginning of the 2008/2009 school year I installed Adobe Creative Suite 3: Master Collection on some of our school computers, a media lab. All the applications work great, such as Adobe Photoshop, InDesign, etc. The one application we can't get to work for the life of us is Adobe Premiere Pro CS3. It works on my machine in my office, which is a standalone box, but for machines which have been sysprepped and imaged, it doesn't work the same. It will render videos fine if they're slideshows made from individual pictures and music. But as soon as you try to add video, Premiere either crashes, or bluescreens. Happens on any one of the 30 computers in the lab, and my computer in my office which it works perfectly on, is identical hardware. Exact same builds. Only difference is mine wasn't sysprepped and Ghosted, and I'm an Administrator.
    The other interesting thing, is none of the machines will capture. Not a single one. They all show "Capture device offline", but when I plug the cameras into my machine, it picks up perfectly. So tell me, to install Adobe Premiere Pro CS3, do I need to install individually on every machine? Or is there something else I'm missing?
    Also, the students are not local administrators. They're just "Domain Users" on a Windows XP machine part of a server 2003 domain.
    Thanks! I look forward to your replies.

    Some troubleshooting tips.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Adobe Premiere Pro CS3 is exporting in the wrong size

    I want to export my clip I've made in Adobe Premiere Pro CS3 while choosing the option "HDV 720p24" (I've also tried 25, 30 and a few others).
    It says in Video Settings before I even start to work on my clip:
    "Frame Size: 1280h 720v"
    Which is EXACTLY what I want.
    However, whenever I choose to export my clip, it ends up being 720 x 480. That's not even 16:9/Widescreen.
    I've tried entering the settings when choosing the export options, but the preset 720 x 480 can't be change.
    Why is this? Is it impossible to expert a clip to be in 1280 x 720 or any other custom pixelsize I want?
    Best regards, Izzy.

    Hi everyone,
    I apologize for digging up an old thread, but I figured that I'm experiencing this exact problem and have no idea how to work around it I might as well post in an already started topic.
    I'm trying to export 1280 x 720 video to that same resolution, but Premiere Pro will not let me choose anything other than 720 x 480 for the size when I try to export through File > Export > Media. I have attempted to use multiple media formats but have had no results for what I need. If it really help, I've posted a couple of screenshots showing my current project settings, but this is just one of a few different formatting attempts which have all turned out the same:
    http://www.derektoigo.com/assets/screenshots/premiereexport1.png
    http://www.derektoigo.com/assets/screenshots/premiereexport2.png
    Hopefully those will be enough to give you a detailed view of exactly what the problem is.
    Any help with how to work around this would be greatly appreciated. Thanks to all.

Maybe you are looking for