Unable to do GR

Hi all
I am able to create,change,view PO and also do MIRO but I am not able to do GR through MIGO.Error message - "PO has no items".
Where have I done the mistake?
Prasad

Hi Prasad,
Check whether ur PO is for services or not? If it is for services then u need to do service entry instead of GR.
If it is a normal PO, then check whether there GR had been done already for that PO in PO history tab.
regards
Anand.C
Message was edited by:
Anand Chidambaram

Similar Messages

Unable to capture SQL Server Schema

I am trying to capture SQL Server 2005 demo schema (AdventureWorks). It does shows the numbers of Tables/Indexes captured..but finishes with this error..
Error ocurred during capture: Exhausted Resultset
Column not found. Skipping index detail on index 'IX_StoreContact_ContactTypeID'
Column not found. Skipping index detail on index 'IX_StoreContact_ContactID'
Column not found. Skipping index detail on index 'AK_StoreContact_rowguid'
Column not found. Skipping index detail on index 'IX_ProductVendor_VendorID'
Column not found. Skipping index detail on index 'IX_ProductVendor_UnitMeasureCode'
Column not found. Skipping index detail on index 'IX_Address_StateProvinceID'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'AK_Address_rowguid'
Column not found. Skipping index detail on index 'AK_Department_Name'
Any help is appreciated..
Ajay

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture DV to FCE, apple support told me a PC is the way forward!

Hi there
I recently bought an apple imac with a view to editing DV footage taken previously.
I had captured some of these tapes on to a PC before buying an imac. These files I was able to edit on FCE and imovie (once I had transferred them from the pc hard drive). HOWEVER although I could control my DV camera through imovie and FCE none of my old DV tapes could be captured to the imac. An error message states that the frame rate is incorrect.
I have apple care protection and have spent ages trying to get support for this only to be told by apple support that FCE and imovie will not capture my old DV tapes! The support person told me that I should go back to a PC if I want to do the job properly!
Unfortunately I have just spent thousands on this very nice looking imac (and FCE) that is apparently unable to do the most basic capturing. Does anybody have any ideas (other than going back to pc) for getting my DV footage captured?
Needles to say I have found all this incredibly frustrating as a new apple user. Are these sorts of issues common to imacs?
cheers
rupert

Hey Rich,
thanks for getting back to me,
I shot tape previously (in 2000) on a sony mini DV camcorder set to SP. I have since bought a new sony mini DV camcorder (DCR-HC40 NTSC).
With the new camera and a PC I was able to capture my 2000 tapes and edit them. I was also able to edit the earlier footage I had transffered from my PC hard drive to the i-mac on i-movie and FCE.
Unfortunatley everytime I have tried to capture my old tapes directly onto the i-mac I have had the message "preview disabled" from FCE and the following from i-movie:
"The camera is sending half-sized frames, which iMovie can’t accept. Check your camera’s record mode (this is the setting that affects recording quality, which determines the total recording time on a tape). The mode must be set to “SP” or “LP.” If that doesn't help, try removing all the cables and batteries from the camera, wait a minute, replace them, and then reset the date, time, and record mode."
I have spent weeks on the support site and found a thread that recommended re-installing quicktime etc but nothing has worked.
I connect to the i-mac via firewire and am able to control the camera, capture my newly recorded miniDV's (so it is not a problem with the proprietary software application etc) but nothing seems to work for my old tapes.
Apple support told me that apple doesn't do older miniDV's and that a pc would be the only way I could capture my tapes. I couldn't believe it! Unfortuatley I no longer have access to my old pc.
Any ideas? Is there any other way of getting DV onto my i-mac?
And thanks for your interest in my problem here
regards
rupert

Unable to capture HD 1080 video from HDCAM deck using Decklink HD

I have an original decklink HD capture card with SDI I/O. I have a rented Sony HDCAM F500 deck for the weekend. I can not get FCP to digitize even a frame. All my QT, FCP, OSX and Decklink software is up to date and compatible with one another acording to Decklink's website.
The capture tool shows no video input. I am conecting via SDI from the HD output of the deck to the SDI input on the card, the capture settings are set to the HD format I need to work in, 23.98 PsF. I get the error mesage when I select the setting I want: Unable to locate the capture device Blackmagic HDTV 1080. Your system config may have changed or your deck/camera may be disconnected or turned off.
The system will work in SD using the downconvert output of the deck, but this does me no good on this job. I hope someone has experience with this problem and can help because I am out of ideas!

sorry mate, if I was in the office I would try to help troubleshoot this thing, but here at home its a bit pointless.
other than suggesting you check that you really do have an Declink HD card an not the Declink SD card, or th epossiblity the card may be faulty, the best I can offer is to point you to the Decklink forum at the Cow.
http://forums.creativecow.net/cgi-bin/newviewposts.cgi?forumid=124
have you tried to capture any other HD flavour with this card? how about capturing via the downcoverted SD and using the card to upconvert to HD? (this is not a suggested workflow, just trying to ascertain whether the card is working in HD at all)

Unable to Capture from My SonyHC3

I am very new to Final Cut Express and hope this is a simple mistake on my part. I am trying to capture some footage into FCE using a firewire but keep getting the colored bars, and the no Communication message. I have a feeling it is the easy setup function that is messing things up. I have tried most of the setups available but keep getting the same messages.
Unable to locate capture device
How do I know which settings i should be using for my Cam? I cannot seem to find anything from reading. I have tried disconnecting and reconnecting,,the truoble shoot section did not help so far.

Well I was able to capture some video...I had quicktime 7. something but updated it anyway. I guess there was a new update,,I followed the directions trashing the files in the library first . Then I went back and tried again and again switching things around in the camera and the Easy Setup.
I chose DV-NTSC in Easy Setup and in the camera i switched (in The STANDARD SET its a toolbox icon in the camera)
the i.LINK CONV to ON (HDV->DV)
Also
I switched the VCR HDV/DV to HDV
So now I get a capture,,,My camera shows that my output is just DV not HDV or 1080 is that a degraded capture...will I lose the Hight Definition?
Also after 9 min 15 seconds of capture it stops due to shortage of disk space.
I push the capture again and it starts up for another 9 min 15 seconds. I had to babysit it for the whole video.
I look in system settings and i have selected my 500 gb external for capture.
what gives here? is it initially capturing somwhere else or is it not able to keep up or what?
At least now I have somthing on there to practice with and start learning the software. I am sure i will be back with more problems questions and solutions.
Thanks in advance.
GreenHorn QNmac

Unable to Capture an image using Native Camera

Hi all,
Please help me out.
I am getting an issue but unable to find out its solution.
I am watching a video on my mobile phone N96 and open the CAM pressing right side button continue, Camera gets opened and i am able to take a snap.
Same functionality i am doing while i am playing a video from my java application. I play a video through my application, while video is running , i open CAM pressing right side button. Camera gets opened. When i click to capture a snap, camera captures a snap but this is not that picture,which was shown by camera while capturing. It captures my video snap which was running on my application.
Please suggest me, is this property of Nokia mobile phone's camera or any defect on that.
Thanks,
Ashutosh

No , I am not using screen captured application.
I am playing a video from my application, when vedio is running, then i open my native camera to capture a snap after pressing right side button.
Ashu

Unable to capture video off of Hitachi DVD+HDD combined hybrid to iMovie

I have video captured on a hard drive in my Hitachi consumer grade camera. I am trying to capture that media into iMovie. iMovie is not recognizing the files on the camera and I am unable to select the media to transfer. I am connecting to my Macbook using a 6pin to USB cord. The camera ONLY has a 6 pin and A/V outlet. I have been unsuccessful capturing any media. If anyone has any insight, please let me know. I am using iMovie 6.0.3
I have heard that I should use firewire, however I can not find a 6 pin to firwire cord. If you know a way to work around having a firewire cord or where I can fine the necessary wire, I would appreciate it.
Thank you.

iMovie HD 6 won't accept mpg-2 compressed files
With luck, you might be able to use them in iMovie '08 (but your camera isn't on the supported list).

Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

Hi I'm attempting to capture HDV footage from a Sony Z1.
I am trying to capture some HDV footage I shot with the Z1, but FCP simply refuses to recognize the Z1
I'm certain I've got all the settings correct:
- Camera is set to HDV firewire out
- capture presets is set to HDV
- device control preset is set to Sony HDV FireWire
- sequence preset is set to HDV 1080i50 (I'm in Australia)
- footage IS HDV 1080i50
But I keep getting the "Unable to Initialize Capture Device and Device Control" popup. I've tried everything
- rebooted the camera
- restarted FCP
- rebooted the system
- changed the capture/device control settings in FCP and tried out a regular DV deck to make sure it wasn't the cable
Nothing has worked.
I'm on a MBPro I7. No Kona card or anything like that, just trying to capture through firewire.
Any suggestions would be greatly appreciated.
Thank you,
Matt
At present it will capture HDV in IMovie but not FCP 6.0.1
Message was edited by: Matt Blyth

Thanks Adrian, since posting the thread I've thought of that too but unfortunately to no avail. From other forums I've read this seems to be a central theme to the solution to my capture woes. I since have sorted the problem it was in Audio/Video Settings.
In the end I set my Audio/Video Settings to:
Sequence Preset to: Apple Intermediate Codec 1080i50
Capture Pre-HDV- Apple intermediate Codec
Device Control Preset: Sony HDV 1080i50 Firewire
And hey presto my I'm capturing HD without any problems. Thanks everyone for your suggestions.
Message was edited by: Matt Blyth

Unable to capture DV footage from HDV camera

I am trying to capture from a dv tape using the Sony HVR-Z1E, but I keep getting the following message:
Unable to initialize capture device and device control........ This might also happen if you play DV footage in an HDV device.
I have tried changing the settings on the camera but to no avail.

Hi James,
This is a good workaround for curing your camera recognition problem:
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
Still not working?
Check whether iMovie recognises your camera.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow Apple's instructions carefully and you should have things running in no time - it's quite harmless!
But if the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Unable to capture user comments and responder in RESPOND API

We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
owf_mgr.wf_notification.setattrtext(p_nid,
               'RESULT'          ,
               'APPROVED');
-- This procedure then caused the WF to advance to next step
-- Respond to notification, depends on RESULT setattrtext above
owf_mgr.wf_notification.respond(     p_nid, -- notification id
     p_respond_comment,     -- response_comment
p_responder     );     --responder role
Any help is greatly appreciated.
Thanks,
Raj

If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
Thanks, Vijay

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to Capture Video PE 3.0

I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?

A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt

Unable to capture startup and shutdown event of Photoshop in automation Plugin.

Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.

Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks

Unable to do GR

Similar Messages

Maybe you are looking for