Unable to do the PGI for Returnable Packing Goods

Dear Guru's
I have posted a Returnable packing goods in MB1C with movement type 561, Stock indicator is V But it was posted in
Returnable Packing Cust Unrestricted .
while i am raising the Delivery with Reference to order i am unable to do the PGI. It is getting with Deficit of SL Unrestricted is nil .
How to go further . pls help me
Thanks in Advance.
suribabu

Dear Guru's
I have completed the PGI for material with Returnable Packing Goods
while in MB1C with Movement Type 561 & With out mention the Special Stock ' V ' .
But in which case we use the SPECIAL STOCK Indicator . can anybody Brief me.
Thank you in Advance.
Regards
suribabu

Similar Messages

PGI for returns using WS_DELIVERY_UPDATE

Hi Friends,
I'm using the FM WS_DELIVERY_UPDATE to do PGI for outbound deliveries. It is not doing the PGI for returns delivery. Can someone help me on how to use this FM for returns delivery PGI or is there any other FM to do this. I do not want to use BDC.
Appreciate your <removed by moderator> response.
Thanks,
Dikshitha G
Edited by: Thomas Zloch on Jul 7, 2011 12:49 PM

Use FM WS_LM_GOODS_MOVEMENT, pass the parameter IF_BITYPE = 'N'. Pass the table parameter CT_WORKTAB of type LIPOV. You can get the data from LIKP. The picking has to be complete on delivery. Use FM WS_DELIVERY_UPDATE to complete picking.

Problem with pgi for returns delivery

Hi,
I'm trying to do PGI for returns delivery through BAPI_GOODSMVT_CREATE.
The when the delivery is opened through VL02N, the Post Goods Issue button has Post Goods Receipt text written on it. When the GI is done, the material document has movement type 651.
However I'm not able to create the same through the BAPI. I have tried various combinations of GM_CODE and all other variables. Have anybody of you tried doing movement type 651 for a returns delivery using the same BAPI?
Please reply if you've come across some similar situation. I know how to use the BAPI, I've been using it successfully for other movement codes etc. It's only in this case that I'm stuck up.
Regards,
Vijay

Hi Vijay,
can u pls tell me how did u do it....i am also having the same requirement....
Developed a custom program for creating and updating Goods Movement Document by using BAPI_GOODSMVT_CREATE & WS_DELIVERY_UPDATE_2.
thanks, Ankita.

I am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

i am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

Temporarily disable/turn off your anti-virus and firewall software and try the download again.
Stedman

When I am doing the PGI for the delivery i am getting error message

Hi All,
Could you please help to solve this issue,
When I am doing the Pgi for one Delivery I am receiving the error message "Posting only possible in periods 2008/03 and 2008/02 in company code", please help to provide the step to resolve this issue.
Regards,
Muralikrishna Nandigama.

Dear Friend,
Make sure you have sufficient quantity in the stocks
The open posting period for your company code is 2008/03 means "oct Nov december" and "Jul aug sep"
So the posting will be possible only in these periods.
Go to TC: OBYC and maintain the posting periods.
Open or close the periods.
You can as well use tC:OB52
CHANGE VEIW POSTING PERIODS SPECIFY TIME INTERVAL: OVERVEIW
edited by,
Amlan Sarkar.

[nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.

Hi Experts,
When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below: Are you facing the same problem ? Please help me,Thanks very much.
Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
Error Codes: AXSBMN8D:
The operation completed successfully.

Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
telnet hostname portnumber
Thanks,

Whats the table for picking & Packing?

Hi!
   Whats the table for picking & packing ? whats their primary field? & How it is linked with sales order table/
Thanks
Imran.

the table and the fields are :
table VEKP           Handling Unit - Header Table
field in the above table are :
fields                   Description
ANZGL                Number of Similar Packaging Materials
VHILM                 Packaging Materials
VBELN_GEN        Delivery in Which Packaging Material Is Generated as an Item
VHART                Packaging Material Type
MAGRV               Material Group: Packaging Materials
VELTP                Packaging Material Category
VPOBJ                 Packing Object
KZGVH                Packaging Material is Closed Packaging
ADGE_DG           Packing Level is Relevant for Dangerous Goods
ADGE_DGPR       Indicator: Packing level is relevant for printing
PACKVORSCHR     Packing instruction
PACKVORSCHR_ST Local packing status for a single HU (without sub HUs) ....
<b>there is link b/t     VEPO and VEKP    with field VENUM .... then </b>
<b>there is link b't    VEPO and VBUK , VBAK ,VBAP etc with field
VBELN</b>
so with VEPO table you can connect   sales tables and   VEKP packing   table ...
reward points if it is usefull ....
Girish

Unable to retreive the fault message returned by web service

Hi,
We are working on Proxy to SOAP synchronous scenario. The WSDL provided by the third party has 3 messages - 1. for request structure, 2. response structure and 3. Error message to track the exceptions, if any. The interface working fine for positive test cases but we are facing issues when trying to capture the error message returned by the web service.
We have configured the error message(provided in WSDL) as fault message in our Inbound interface. In the outbound interface, we have configured standard Fault message type provided by XI. we have mapped the two structure.
Now when error is returned by the web service, we are able to see the blank response structure in the payload in MONI in XI. Also the SOAP Error Message structure is there in XI.
But when we trying to retrieve the same in our proxy, it is giving the blank structure.
Please help how to get the error message returned by the web service in proxy....
Please help..
Thanks in advance.

>>>I am getting the error message as the fault message, in the response from the web service.
>>>Now I want to forward the same message to SAP R/3 system. For this I have configured the standard fault message in the >>>outbound interface and have mapped the same with the web service error message. So if I am not wrong, the transformed >>>>structure according to the rules in message mapping should be sent to SAP R/3 system. But I am unable to see the result >>>>of this mapping in XI MONI. Neither is this passed to Client proxy.
You are consuming the third party webservice. Third party webservice WSDL has request, response and fault message. if the third party application logic capture the exception and pass the response as fault mesg, then the above specified target fault mesg mapping with your Standard fault message mapping will be sent to sender or client proxy.
Suggestions:
Having fault message in WSDL does not mean that target system sends fault message during application exception. Check in the SXMB_MONI whether your response during exception is occuring in the fault message structure publised as WSDL. If not then doing mapping will not help. It gives only blank.
If you notice response in fault message structure from third party in SXMB_MONI, then you need to check that at the client proxy side, are you handling/done coding for fault message methods similar to response strucutre for capturing data.
Hope that helps.

Problem while doing PGI for Returns Delivery

Hi,
We are facing some problem which doing PGI for a returns delivery. Our scenario is HU and WM managed. After creation of delivery I have created a TO and has two different valuation type of same material. Total quantity in TO is 2, 1 of each valuation type. So, automatically, batch split happened for the line item in delivery.
Now when I am trying to do PGI for this delivery, I get en error message saying "Enter Valuation Type". The movement type used here is 161 (Vendor Returns)
Same thing is happening successfully for movement type 643 (Transfer inter company code). What I can gather is that while creating 161 document against delivery system is not automatically taking the valuation types mentioned in line item of delivery.
Let me know possible reasons for this error and resolution.
Regards,
Vishal

Implement the OSS note 965985

I am Unable to install the driver for my Kodak ESP-3 on Windows 7 64 bit

I have gone to the Kodak site and dowloaded and ran the software and Windows is still unable to detect the printer. all the other Easyshare software is successfully installed. Windows is recognising it as a scanner (as it is an printer/scanner
combo 'All-in-One-printer') which works but i can not print. There is no error message other that 'Windows has not installed the drivers successfully' but is recognising the type of device as Kodak EasyShare Aio (camera).
I have Windows 7 Home Preimium 64-Bit SP1.
Please Help.

Hi,
If you installed the All-in-One Printer Software, you may navigate to the following path to open printer configuration:
a. Select Start > Programs (or All Programs) > Kodak > KODAK Printer Setup Utility.
b. Follow the on-screen instructions to set up the printer.
Also, you could contact the KODAK support for further help.
Alex
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How can I change the text for 'Return' and 'Back' links

Hi everybody,
How can I change text of standard links 'Return' and 'Back' that appear at the report bottom when user drills down?
I need to change it in Hebrew interface.
Thanks in advance,
Alex

You have to Customize the viewmessages.xml file. The original file path for English Language is
oraclebi\web\msgdb\l_en\messages\viewmessages.xml.
and The entries for back and return are
<WebMessage name="kmsgEVCLinkBack"><HTML>Back</HTML></WebMessage>
<WebMessage name="kmsgEVCLinkReturn"><HTML>Return</HTML></WebMessage>
For more details, about language cusotmization read oracle documentation, page no 197.
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31766.pdf
- Madan

What is the procedure for Return Pricing Procedure

Dear Experts,
   Pricing Routine for Return Pricing Procedure To create Return sales order w.r.t billing document without copying the Pricing Procedure. To capture the net price from the Billing document to the Return Sales order .To change the net price to 0.01 based on the scrap item category RSCR in return sales order. please help me out from this issue .Thanks in advance.I'll give you full points.

Dear Experts,
   Dear Experts,
I've been working in an implementation project..I never worked on pricing routines...so please give me any inputs which can help full for me...
To create Return sales order w.r.t billing document without copying the Pricing Procedure.
To capture the net price from the Billing document to the Return Sales order
To change the net price to 0.01 based on the scrap item category RSCR in return sales
     order.
please help me out from this issue
Thanks in advance..
I'll give you full points..

Unable to see the data for the hierarchy in rsa3

Hi Gurus,
i am trying to check the data for the standard hierarchy in rsa3,but it is showing an error message saying that error 6 in functional module rss_program_generate.Please help me out.
thanks
bhaskar

Check if this helps seemed relevant
Error 6 in function module RSS_PROGRAM_GENERATE
Error 6 in function module RSS_PROGRAM_GENERATE
error Error 6 in function module RSS_PROGRAM_GENERATE

Unable to generate the output for S_ALR_87012048

Dear All,
We are trying to execute the report S_ALR_87012048 for the first period in 2015. We have tried execute this report with report date 25.01.2015 (which is the last day in period 01), but it is giving no data was selected.
Can anybody suggest whether I need to give any further inputs to generate the output apart from the below.
Co.code : 9000
Reporting date : 25.01.2015 (which is the last day in our fiscal period 01 /2015)
Dep area : 01
Sort Variant : 03 (co.code / bs accounts / asset class)
User able to execute this report in the last month successfully.
We have completed all year ending process as well.
I have tried execute this report in our quality system with reporting date as 31.12.2014 and 31.12.2015.
Do we need to give reporting date as year ending date ? or last date of current period.
Thanks in Advance.
Prasad

Hi Prasad,
I do believe that you should consider the authorization side of the matter carefully as pointed out by Mahmoud on Feb 6th. Please check again the mentioned SAP Notes in that thread.
For example, I just tested in my system, I can trigger a report even in a closed fiscal year with a report date end of each period. The only difference is that I get a information message:
Report date is in a closed fiscal year
Message no. AU172
Diagnosis
The report date is in the past.
Here the report date is allowed to be the end of the year as well as any
period end during the fiscal year.
System Response
In an asset report during the fiscal year (report date for a period end
within the year) in a closed fiscal year, it can be the case that the results
for depreciation or the net book value are different between the historical
calculation and the current calculation for the report date. The reason for this
are any changes to asset-related depreciation terms, such as the depreciation
key, useful life, and so on. In the case of such changes, the asset values are
recalculated with the currently entered depreciation terms.
In an open fiscal year and a report date end of period I do not get AU172 and get an output.
Beside above provided SAP Notes, also see another couple of SAP Notes with some interesting information are also:
1566099 Reporting in Asset Accounting
1491612 Authorization concept in FI-AA
1394450 Reporting: Authorization check for report assignment
929732 Authorization checks: Correction Note 856248
856248 Authorization checks in asset reporting
Regards,
Brigitte

I'm unable to download the driver for photosmart C310 as the page is blank.

My computer was just repaired so I've been trying to reinstall my printer (Photosmart C310). My computer can't find the printer even though they are both properly on the same wireless network. I've been trying to download the driver from HP in hopes that it will help but anytime I click on the link for either C310a b or c the page is blank. I have checked that my Adobe flash is up to date, so whats wrong with the HP page?

Hi,
It's blank could be because of this:
http://support.hp.com/us-en/document/c04510394
I've got the above link when go to:
http://support.hp.com/us-en/product/HP-Photosmart-Premium-All-in-One-Printer-series---C3/4023238/mod...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to do the PGI for Returnable Packing Goods

Similar Messages

Maybe you are looking for