Unable to download Apple TV 2nd Gen 5.1 software

So this is weird...
I've had the 2nd Gen Apple TV for a couple years now with no issues.  I was very excited for the mirroring ability with Mountain Lion, downloaded and installed it today.  But I couldn't mirror...
I looked at the required specs "minimum 5.1 OS on the Apple TV".... checked my Apple TV and it's running on 5.0.2 and when I run the software update on it, it tells me it's up to date.
So what's the deal here?  Is the 5.1 a typo?  Is there some trick to updating to 5.1?
Just to be clear here's my config's:
Mid 2009 MBP running on 10.8
2nd Gen Apple TV currently on 5.0.2
HDMI'd into a Samsung LN40... just a normal flatscreen LCD
and I've had no issue for years playing music to the Apple TV or running Netflix or Apple Store movies.

http://www.apple.com/uk/osx/specs/
Feature specific requirements.

Similar Messages

  • HT4743 If I bought a season pass on Apple TV (2nd Gen), will I be able to download the episodes onto my iMac or MacBook Pro?

    If I bought a season pass on Apple TV (2nd Gen), will I be able to download the episodes onto my iMac or MacBook Pro?

    Yes. After you purchase the season pass go to iTunes and pull down Store > Check for Available downloads.

  • HT201272 I am using Apple ipod 2nd gen with IOS 4.2.1 . No i recently updated my IOS and all my apps were deleted. Now when i download IBOOKS it needs IOS 5. How do i get the apps which are copatible with IOS 4.2.1 or IPOS 2nd GEN??

    I am using Apple ipod 2nd gen with IOS 4.2.1 . No i recently updated my IOS and all my apps were deleted. Now when i download IBOOKS it needs IOS 5. How do i get the apps which are copatible with IOS 4.2.1 or IPOS 2nd GEN??

    You should always have your apps on your computer.  If you have failed to keep a copy of the old app versions, then you cannot get them back at all.
    Sorry.
    Many app makers no longer support the old ios and ipod models

  • If I initially rent and begin watching a movie on my Apple TV (2nd Gen) can I later change and finish watching it on my iMac (same iTunes account)?

    If I initially rent and begin watching a movie on my Apple TV (2nd Gen) can I later finish watching it on my iMac (registered with same iTunes account)?

    The other way to do this would be to download all your rentals onto the Mac, then you can choose watch them on the Mac or Airplay them to the ATV.
    At least that way you can switch back and forth as often as you like during the "watching" period AND have 1 month to begin watching it after you've downloaded it.

  • How do I play iTunes LP content on Apple TV 2nd gen?

    I've just upgraded my Apple TV 2nd gen, and iTunes on my Mac.
    I can't figure it out. Is it possible to play iTunes LP content ("CDs extras") on Apple TV?

    No, only AppleTV 1 did that and until recently ony AppleTV 1 did iTunes Extras.
    iTunes Extras have just been added so maybe hope for itunes LP, though I gather Extras is streaming only and old itunes downloaded Extras may (I haven't tested yet) be incompatible.

  • Sky Go content won't play on Apple TV 2nd Gen

    I have a UK Sky Go account and can download video to iPad.  When I activate Airplay to Apple TV 2nd Gen it will not display. Apple TV works fine with iTunes downloaded content.
    Any options/ideas to get this working??

    While I am pretty sure I had tried it, I just did a little rearrangement within my stereo cabinet which resulted in moving the Apple TV to another shelf.  And of course unplugging it to move cables.   After powering it up and redoing some of the setup, the movie plays properly.   So maybe a power cycle was needed.   Or maybe the problem resolved itself and the power cycle just coincidently happened at the same time.   Either way, my problem has been resolved.

  • MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen

    Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
    A little more about my MacBook Pro:
    Early 2011 Model ID: MacBookPro8,2
    OS: 10.8.2 Mountain Lion
    CPU: Intel Core i7
      Processor Speed:          2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
    Memory: 4 GB
    GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
    This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
    Any suggestions, tips, ideas, etc. to get this working is appreciated!

    Rudegar wrote:
    your macbook dont support airplay mirror
    He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring.

  • 1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

    The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
    When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
    If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

    You can home-share multiple libraries but only use one account at a time.

  • Is there a way to view private photos from Flickr on my Apple TV (2nd gen)?

    I've just started using Flickr as a central platform from which to view family photos, in part because of the number of ways there are to access them, e.g. iPhone, iPad, web, and Apple TV.
    Now, however, it appears the only way to get photos from Flickr to show up my Apple TV (2nd gen), is to make them public. I do not wish for all my photos to be public; is there any way around this restriction?

    I am not aware of any workarounds to this restriction.

  • Apple TV (2nd gen) not showing up as a device in iTunes

    Hi all,
    I have this problem. The Apple TV (2nd gen) does not show up in iTunes under devices, and I really don't know why.
    Mac OSX 10.6.5
    iTunes 10.1
    AppleTV 2nd gen with latest update installed
    Network is a WiFi Airport Extreme (Mac and AppleTV are indeed on the same private network)
    Airplay works, home sharing works fine. Remote App on iPad and iPhone works.
    But the AppleTV is not showing up under devices.
    I had a 1st gen AppleTV which I reverted to "factory settings" before unplugging. The 2nd gen ATV had the same name as the 1st gen at the beginning, but I changed it afterwards figuring it might be related.
    Under iTunes > preferences I had the AppleTV tab. But I did read somewhere on Apple's site you have to "delete" the AppleTV from the list. So I did, and now the tab cannot be found anymore...
    Can anyone help?
    Thank you in advance.

    iMat77 wrote:
    I seem to recall though that I have seen a screenshot somewhere on the web where iTunes showed the ATV 2nd gen as a device.
    Not seen that, but the old ones have a logo that look (to me) like the new one, or at least a small darker grey than they are - they show up nicely in the iPad/iPhone Remote app though
    If you are right it would be huge disappointment!
    I believe I am correct as I've got new/old AppleTVs connected to 3 Macs and a dual boot Mac Pro currently, and the new unit has never appearede under devices.
    .... I really HATE the interface organization right now. Why on planet earth do I have to go under "devices" -> "computer" -> "music" just to play some music?
    You, me and many other AppleTV 1 users. I think they'd finally got it right in 3.02 for AppleTV 1 which is a much nicer user interface. Basically now the majority of the top level columns are unused by many people who don't rent but want to playback theit iTunes media.
    I firmly believe Apple see this new AppleTV as a relatively cheap accessory for iPads/iPhones/iPods to show video/photos via Airplay on your TV without using a computer.
    Secondly it's a vehicle for pushing itunes Store rentals, but for the majority of worldwide users they can only get Movie rentals, and Netflix is of no use bar in a few countries (US/Canada).
    I would have much more preferred that a "music" tab (it also applies to all other tabs, movies, tv series and so on) and then just a list of all "home sharing" connected computers from which I could pick the one where the music is stored. Or even, and being Apple it surprises me they didn't implement it, just the list of the available music on my network, with a little tab indicating in which computer it is located.
    Yes that would make absolute sense - a dynamic list of available content based on connected libraries that changes as new libraries appeared on/left the local network.
    The new menu organisation is quite shoddy to me, ut many users new to AppleTV like it and rave about the devices not knowing what the old one could do - it's a good device don't get me wrong, but I still prefer the older units except for their power consumption and the fact I feel they are more likely to fail due to their high temps and mechanical hard drives.
    But here I'm venturing FAR off topic.
    Don't think so, it's a valid comment.
    Use this:
    http://www.apple.com/feedback/appletv.html
    Thank you for your help anyway. I wait for confirmation of somebody else just to make sure...
    Fair enough.

  • My Apple TV (2nd Gen) woun't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..

    My Apple TV (2nd Gen) won't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..
    If I mess this up ... sorry it my first time....

    I found this after posting here:
    http://trick77.com/2011/02/04/apple-tv-2-with-white-led-flashing-blinking-fast/
    It appears that this is due to firmware corruption and you can fix it by using the micro USB cable and hooking it to iTunes.  I have not tried it yet but supposedly several people were able to resolve their problem this way.  If you do try it, let me know.  I don't have the cable at this time.

  • I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

    I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

    I can't by pass it either. Any suggestions?
    Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
    I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
    Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

  • HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

    I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
    I am able to get the 'Home sharing' 'user and password on my Mac.
    Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
    However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
    When I give the same password, it is rejected.
    Help!!!!
    Jaxxdiggs

    Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
    Something along those lines anyway.
    I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
    AC

  • Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

    Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Question for audiophiles using Airplay with Apple TV 2nd Gen

    I'm using AirPlay on my iphone to play music to the Apple TV 2nd gen. (running optical out of AppleTV into high quality Rotel receiver)  I'm hearing what I believe is best called "pumping" in the audio: the volume is modulating in waves, and the music sounds distant.  I can't figure out what would cause this.  I've got excellent signal strength so I don't think it's a bandwidth problem where the devices might be over-compressing and thus introducing artifacts.
    I've done A/B comparisons with the same song, hardwired to my receiver, and I've heard it on all the tracks I'm streaming, so I know it's not in the recording.
    Has anyone experienced this phenomenon?  Thanks.

    Sorry, I can only offer sympathies and the fact that I also had this issue with wired connections, using XBMC on my Mac Mini to play out to an Audiolab M-DAC. Unfortunately I made lots of changes trying to set up my Media Center, so I don't know what made it go away!
    Just saying that it's not neccessarily an Airplay issue.

Maybe you are looking for

  • Help With Creating HR Schema on Oracle 10g

    Hi; I am new to oracle and need help to setup HR schema to practice tutorial for Oracle SQL Developer 1.2. Any help and guidence will be highly appreciated. Found this script "hr_code"in C:\oracle\product\10.1.0\Db_1\demo\schema\human_resources but d

  • Padding with zero according to field size!

    Dear All, I want to add leading zeros, as per numeric column width while selecting data through sql query. Kindly let me know how to do this. For example if in a table there is field empID number(3) Now if the data is 1 23 999 45 7 The result i shoul

  • XML Tree Overview

    Hi, Is there a XML Tree Overview out there? Like to see all the parameters I can add in my XML tree when I build my XML (.srf) Form. Edited by: Rune Brattas on May 5, 2008 2:43 PM

  • What is the latest firmware for N80ie?

    Hi there I've tried searching the Nokia Update site, googling and just about everything else I could think of, all with no luck. Please could someone tell what the latest Nokia N80 Internet Edition firmware is, and what RM- codes it supports, or poin

  • Update record form

    Hello all, I've got an update record form on one of my pages (it is a php site). I followed the tutorial in dreamweaver 8, but it does not work like I want it to work. I am hoping that when a user logs into the site, and they want to update their inf