Unable to download Firefox application. After 30 sec. operation timed-out

Due to problems with IE I was advised to try Firefox, but when I try to download it, after about 30 sec. I get a message that operation timed-out. I'd like to get the application on a CD if possible?

Hi louiserb, and a warm welcome to the forums!
Generally, that bad img thing is either RAM, or problems with the HDD.
Failure of APPs to open is likely Permissions problems or incomlete installs.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
Let us know where you are after that.

Similar Messages

  • I'm unable to download the latest iPhone software, keeps timing out no matter when i try.

    I'm unable to download the latest iPhone software, keeps timing out no matter when i try. Any help would be much appreciated.

    I have the same issue.. i've reset network settings but still not resolved.. anyone - any ideas?

  • Unable to download firefox, operation times out

    Tried to download firefox with internet explorer, at 99% is says operation timed out
    == This happened ==
    Not sure how often
    == downloaded firefox ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 1.0.3705; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    [[Installing Firefox on Mac]] is somewhat detailed on how to do the install.
    The requirements [http://www.mozilla.com/en-US/firefox/5.0beta/system-requirements/ are]:
    ''Operating Systems''
    *Mac OS X 10.5
    *Mac OS X 10.6
    ''Recommended Hardware''
    *Macintosh computer with an Intel x86 processor
    *512 MB of RAM
    *200 MB hard drive space
    What is that doesn't work for you? Could you please give more details?
    Thank you.

  • Unable to download any applications through BB App World

    Hi!!
    I have been facing a problem on the BB App World front. Each time I try to download any application through the BB App World it takes me to the Download tab in green but after I click the tab nothing happens.
    As a result I am unable to download any application on my Blackberry.
    Please help me resolve the issue.
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    I suggest that you clear the AppWorld application cache:
    1. Open App World
    2. Go to My World
    3. Follow one (and only one!) of these steps:
    3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
    3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
    3c. For newer (e,g., OS6 and 7) BB's, see this KB:
    KB24714 How to clear the BlackBerry App World cache
    4. AppWorld should close.
    5. If your BB locks after issuing the cache clear, perform a battery pull reboot
    6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
    If step (4) does not happen as listed, then the clear cache did not work.
    Hopefully it'll work for you! Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this?

    Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this? Someone please help!

    Try using Google's DNS instead of the one your IPS is providing.
    - To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
    - For the computer see:
    Public DNS — Google Developers
    - Did anything happen to your router right before this started? Maybe the router is blocking the port used.

  • Unable to download an application on appworld?

    Unable to download an application on appworld, be directly from my z10 or by scanning the QR code.
    Similarly for updates applications error message.
    I remove the battery, with wifi, free wifi, etc ... nothing could be done.
    At first I thought was a memory problem, I still have my 10GB so the problems do not come from.
    This happens with all the apps (paid or free) and I do not see or could be the problem?
    -----  FRANCE --- blackberry z10 OS 10.1.0.2312 STL 100-2 --- SFR --
    Impossible de télécharger une application sur appworld ?
    Impossible de télécharger une application sur appworld, sois directement à partir de mon z10 ou en scannant le code QR. De même pour les mises à jour des applications message d'erreur. J'ai enlever la batterie, avec wifi, sans wifi, etc... rien y fait.
    En premier j'ai penser a un problème de mémoire, mes il me reste 10 Go donc le soucis ne viens pas de la.
    Cela se produit avec toutes les applications (payante ou gratuit) et je ne vois pas ou peut provenir le problème ?

    Hello Pascal,
    The following article will assist you with resetting your BlackBerry ID password:  http://www.blackberry.com/btsc/KB26361
    Please try logging in with the new password when prompted.
    Let us know if this helps.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

    I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

    Try going to Settings>Store and sign out and sign back in.
    It also could be due to an Apple server problem. and yu will just have to wait and try again.

  • Operation timed out when starting application server

    Hello experts, I recently installed the Netweaver ABAP preview edition on my pc. So when I try to start the application server after a while it says that the operation timed out so I cant log on using SAPlogon. Any help on this would be greatly appreciated. Thanks a lot guys!

    Hi,
    Check if SAP is up and running in the SAP MMC.
    If SAP is not running
    Please check/paste the dev_w0 file in /usr/sap/NSP/DVEBMGS00/work directory.
    Regards,
    Siddhesh

  • "TNS-12535: TNS:operation timed out" error after listener restart

    I have two related questions:
    Scenario 1:
    1. I have two remote Windows machines with database on each. One is Win 2003 Server (machine A) and another one is Win XP (machine B)
    2. I can ping from A to B.
    3. I can ping from B to A.
    4. I can tnsping from A to B.
    5. I CAN'T tnsping from B to A.
    6. Windows Firewall on both machines are off.
    What could be possible reason for point# 5?
    Scenario 2:
    Now, the second part:
    1. I had an unwanted entry in tnsnames.ora on B which I removed.
    2. Then I restarted the listener on B. Actually, I wanted to restart the one on A to check if that resolves issue mentioned in point# 5 above.
    3. I tried tnsping from A to B but suprisingly it is also giving "operation timed out" error now. So now tnsping not working from either sides.
    I didn't make any changes in listener.ora on B, just stopped it and started again. Only change made was removing unwanted entry in tnsnames.ora on B.
    Why does that affected database connectivity from A to B which was working fine previously?
    If any extra information needed please let me know, and thanks in advance for your answers.
    - Ramesh

    DB names on both machines: ORCL
    listener.ora on B (Win XP) - This was working before listener restart, I mean, I was able to connect to DB on B from A.
    # listener.ora Network Configuration File: C:\app\Test\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\app\Test\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Test\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = c:\app\Test\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = testpc)(PORT = 1521))
    ADR_BASE_LISTENER = C:\app\Test
    listener.ora on A (Win 2003 Server) - Never able to connect to DB on this machine from A.
    # listener.ora Network Configuration File: D:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:D:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = NRDBSVR.delldomain1.netreachasia.com)(PORT = 1521))
    ADR_BASE_LISTENER = D:\app\Administrator
    NOTE:
    Machine A = NRDBSVR.delldomain1.netreachasia.com (Win 2003 Server)
    Machine B = testpc (Win XP)

  • ORA-12535: TNS:operation timed out on a win2000 Oracle instance

    Hi,
    i have a Oracle 8.1.5 instance on a WIN2000 PC.
    I can connect me to this database with sqlplus
    as long i stay on the PC (means i started the sqlplus
    on the same machine).
    When i try to connect from an other (unix-)system
    i get after a while (ca. 90 sec.) the error:
    ORA-12535: TNS:operation timed out
    tnsping works fine (answer comes back in one second)
    There are no firewalls or other "strange" things between
    the database and the failing client (on an other PC,
    also win2000, Oracle 8.1.5 everything works fine).
    Below you see the log with debug of the listener.
    I have also a trace on level SUPPORT but this is more
    than 1000 lines for just 1 or 2 TNSPINGs and one SQLPLUS
    connect. Due to this volume i decided not to attach it to
    this initial mail.
    Does any one have some advice or experiences ?
    Please advice.
    Best regards,
    [email protected]
    ======================================================================
    TNSLSNR for 32-bit Windows: Version 8.1.5.0.0 - Production on 19-APR-01 09:07:26
    (c) Copyright 1998 Oracle Corporation. All rights reserved.
    Die System-Parameterdatei ist D:\Oracle81\network\admin\listener.ora
    Log-Meldungen wurden geschrieben in: D:\Oracle81\network\log\listener.log
    Listen auf: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=driller-nb)(PORT=1521))(PROTOCOL_STACK=(PRESENTATION=TTC)(SESSION=NS)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    19-APR-01 09:07:28 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
    19-APR-01 09:08:04 * service_register * MDR50 * 0
    19-APR-01 09:08:11 * trc_level * 0
    19-APR-01 09:08:16 * trc_level * 0
    ---------------- BEGIN TNSLSNR DEBUG ---------------------
    *** ENDPOINT #1 **
    Name:
    Address: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=driller-nb)(PORT=1521))(PROTOCOL_STACK=(PRESENTATION=TTC)(SESSION=NS)))
    Presentation: ttc
    Session: NS
    Info = <none>
    Display: <none>
    Load: 0
    Handler ID = 80FFE377148D-41F8-AAC2-09A8BD4BE682
    Oracle SID = <none>
    Flags:
    ** INSTANCE #1 **
    INSTANCE_NAME: MDR50
    SERVICE_NAMEs: MDR50
    INSTANCE LOAD: 0
    INSTANCE ID: 4CC2FCDA6819-40D2-839D-F1628CC0BCA2
    FLAGS: LOCAL
    VERSION: 81500
    NUM. HANDLERS: 2
    Handler Matrix: (NS):
    tcp nmp spx raw ipc beq lu62 tcps ANY
    ttc 0 0 0 0 0 0 0 0 0
    giop 0 0 0 0 0 0 0 0 0
    http 0 0 0 0 0 0 0 0 0
    ro 0 0 0 0 0 0 0 0 0
    ANY 0 0 0 0 0 0 0 0 2
    Handler Matrix: (RAW):
    tcp nmp spx raw ipc beq lu62 tcps ANY
    ttc 0 0 0 0 0 0 0 0 0
    giop 0 0 0 0 0 0 0 0 0
    http 0 0 0 0 0 0 0 0 0
    ro 0 0 0 0 0 0 0 0 0
    ANY 0 0 0 0 0 0 0 0 0
    SERVICE HANDLERS:
    Name: DEDICATED
    Address: (ADDRESS=(PROTOCOL=beq)(PROGRAM=oracle)(ENVS=)(ARGV0=oracleMDR50)(ARGS='(LOCAL=NO)'))
    Presentation: <none>
    Session: <none>
    Info = LOCAL SERVER
    Display: DEDICATED SERVER
    Load: 0
    Handler ID = 83CB008C17A3-4E48-94DA-2765A62AAD7E
    Oracle SID = <none>
    Flags: BEQUEATH
    Name: DEDICATED
    Address: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMDR50)(ARGS='(DESCRIPTION=(LOCAL=no)(ADDRESS=(PROTOCOL=BEQ)))'))
    Presentation: <none>
    Session: NS
    Info = LOCAL SERVER
    Display: DEDICATED SERVER
    Load: 0
    Handler ID = D9E0EC298D16-40FA-935F-7B989D139666
    Oracle SID = MDR50
    Flags: BEQUEATH CONNECTED DYNAMIC
    ** INSTANCE #2 **
    INSTANCE_NAME: PLSExtProc
    SERVICE_NAMEs: PLSExtProc
    INSTANCE LOAD: 0
    INSTANCE ID: 000000000000-0000-0000-000000000000
    FLAGS: LOCAL
    NUM. HANDLERS: 1
    Handler Matrix: (NS):
    tcp nmp spx raw ipc beq lu62 tcps ANY
    ttc 0 0 0 0 0 0 0 0 0
    giop 0 0 0 0 0 0 0 0 0
    http 0 0 0 0 0 0 0 0 0
    ro 0 0 0 0 0 0 0 0 0
    ANY 0 0 0 0 0 0 0 0 1
    Handler Matrix: (RAW):
    tcp nmp spx raw ipc beq lu62 tcps ANY
    ttc 0 0 0 0 0 0 0 0 0
    giop 0 0 0 0 0 0 0 0 0
    http 0 0 0 0 0 0 0 0 0
    ro 0 0 0 0 0 0 0 0 0
    ANY 0 0 0 0 0 0 0 0 0
    SERVICE HANDLERS:
    Name: DEDICATED
    Address: (ADDRESS=(PROTOCOL=beq)(PROGRAM=extproc)(ENVS=)(ARGV0=extprocPLSExtProc)(ARGS='(LOCAL=NO)'))
    Presentation: <none>
    Session: <none>
    Info = LOCAL SERVER
    Display: DEDICATED SERVER
    Load: 0
    Handler ID = 56D4DAD11082-4097-992C-AF7F8067D858
    Oracle SID = <none>
    Flags: BEQUEATH
    ---------------- END TNSLSNR DEBUG ---------------------
    19-APR-01 09:08:28 * debug * 0
    19-APR-01 09:08:41 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
    19-APR-01 09:09:57 * ping * 0
    19-APR-01 09:10:16 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=slarti)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55678)) * establish * MDR50 * 0
    19-APR-01 09:14:39 * trc_level * 0
    19-APR-01 09:14:58 * trc_level * 0
    19-APR-01 09:15:06 * trc_level * 0
    19-APR-01 09:16:16 * trc_level * 0
    19-APR-01 09:16:20 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
    19-APR-01 09:16:33 * trc_level * 0
    19-APR-01 09:17:09 * ping * 0
    19-APR-01 09:17:51 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=slarti)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55695)) * establish * MDR50 * 0
    19-APR-01 09:18:06 * MDR50 * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55695)) * service_update * MDR50 * 0
    19-APR-01 09:23:33 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=deep-thought)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.22)(PORT=42006)) * establish * MDR50 * 0
    19-APR-01 09:28:09 * MDR50 * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.22)(PORT=42006)) * service_update * MDR50 * 0
    19-APR-01 09:28:25 * ping * 0
    null

    Rather than
    MyDB.10gXE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MYSERVER)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    why not go with the bulk standard tnsnames entry as follows:-
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MYSERVER)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    I don't think the qualified MyDB.10gXE name is adding any value and may well confuse things.
    Although setting it for my environment does work
    C:\Documents and Settings\mtownsen.ST-USERS>tnsping myDB.10gXE
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-NOV-2
    005 18:06:48
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = mtownsen
    -lap.us.oracle.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_
    NAME = XE)))
    OK (40 msec)
    OK - when I use your entry pasted directly from the above, with my server name, I get the following problem:-
    C:\Documents and Settings\mtownsen.ST-USERS>tnsping myDB.10gXE
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-NOV-2
    005 18:07:43
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION =
    TNS-12533: TNS:illegal ADDRESS parameters
    I added back some spaces, as indicated by the . below, and it works fine
    MyDB.10gXE =
    (DESCRIPTION =
    .(ADDRESS = (PROTOCOL = TCP)(HOST = mtownsen-lap.us.oracle.com)(PORT = 1521))
    .(CONNECT_DATA =
    .(SERVER = DEDICATED)
    .(SERVICE_NAME = XE)
    .)

  • Listener overloaded or High load .?..ORA-12535: TNS:operation timed out

    We have an OLTP db server with oracle 11g(11.1.0.7) installed on Linux 64bit OS.
    Client : Dotnet application running on win2003 server
    oracle client version on webServer 9.2.0.4
    Work load on system is
    Avg Executions Per Sec 1273.35
    Avg Executions Per Txn 42.1
    Avg Response Time Per Txn (secs) .13
    Avg User Transaction Per Sec 30.4
    Avg Concurrent Sessions on server 350 processes 600
    memory_target 13gb
    we are experiencing "ORA-12535: TNS:operation timed out" while users access the application from webserver.per day around 200 errors.
    To get rid of the above error we set SQLNET.INBOUND_CONNECT_TIMEOUT=0 in server side sqlnet.ora and
    in Listener.ora inbound_connect_timeout=120 but of no use, even we observed for few days with inbound_connect_timeout=0.
    There is Only one listener configured on server.
    The similar set up with lesser workload working fine without any errors.
    Please let me know your thoughts....
    --Pandey
    Edited by: user12204025 on Feb 10, 2010 8:14 AM
    Edited by: user12204025 on Feb 12, 2010 2:52 PM

    But I am seeing this errors in listener alert file.
    <msg time='2010-02-15T15:55:37.734-06:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='hostname.domainname'
    host_addr='127.0.0.1'>
    <txt>15-FEB-2010 15:55:37 * 12502
    </txt>
    </msg>
    <msg time='2010-02-15T15:55:37.734-06:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='hostname.domainname'
    host_addr='127.0.0.1'>
    <txt>TNS-12502: TNS:listener received no CONNECT_DATA from client
    </txt>
    </msg>
    and in alert log file below entry...
    Fatal NI connect error 12170.
    VERSION INFORMATION:
    TNS for Linux: Version 11.1.0.7.0 - Production
    Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
    TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
    Time: 15-FEB-2010 02:46:21
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
    Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=gatewayip)(PORT=4804))
    please let me know your thoughts.....

  • Ifs-21030 Database operation timed out

    Hi,
    We have installed cmsdk 9.0.4.2.2 with oas10g 10.1.2.0.2. The application runs fine, but sometimes we got the following error:
    [AJPRequestHandler-ApplicationServerThread-6] ERROR cmsdk.CmsdkUtil - Error with gettting document
    oracle.ifs.common.IfsException: IFS-21030: Database operation timed out
    java.sql.SQLException: ORA-01013: user requested cancel of current operation.
    I have set the IFS.SERVICE.SESSION.DefaultSearchTimeoutPeriod, but it doesn't help. Normally the documents are displayed immediately, but when the error occurs, it can take 30 min or more. Mostly, but not always, the error occurs on monday morning, while getting the first or second document after the weekend in which the application is not used. Sometimes the first documents comes up immediately, and the second gives the error.
    Are the parameters, agents, sessions, .. to configure to avoid this problem?
    Can anyone help me with this?
    Regards,
    Els

    I forgot to mention that we use a webservice. This is the complete error from the OC4J instance, found in the <oracle home>\opmn\logs dir
    oracle.ifs.common.IfsException: IFS-21030: Database operation timed out
    java.sql.SQLException: ORA-01013: user requested cancel of current operation
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:698)
         at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:630)
         at oracle.jdbc.driver.T2CPreparedStatement.doDefineExecuteFetch(T2CPreparedStatement.java:1142)
         at oracle.jdbc.driver.T2CPreparedStatement.execute_for_rows(T2CPreparedStatement.java:1010)
         at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1022)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1109)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2973)
         at oracle.ifs.server.S_LibrarySession.executeQuery(S_LibrarySession.java:16561)
         at oracle.ifs.server.S_LibraryObjectSelector.findObjectById(S_LibraryObjectSelector.java:556)
         at oracle.ifs.server.S_LibraryObjectSelector.selectObjectById(S_LibraryObjectSelector.java:494)
         at oracle.ifs.server.S_LibrarySession.constructLibraryObjectData(S_LibrarySession.java:8024)
         at oracle.ifs.server.S_LibrarySession.getLibraryObjectData(S_LibrarySession.java:7811)
         at oracle.ifs.server.S_LibrarySession.getLibraryObject(S_LibrarySession.java:8283)
         at oracle.ifs.server.S_LibrarySession.getPublicObject(S_LibrarySession.java:8407)
         at oracle.ifs.server.S_LibrarySession.DMgetPublicObjectData(S_LibrarySession.java:8051)
         at oracle.ifs.beans.LibrarySession.DMgetPublicObjectData(LibrarySession.java:13209)
         at oracle.ifs.beans.LibrarySession.getPublicObject(LibrarySession.java:4944)
         at be.kindengezin.cmsdk.CmsdkUtil.getDocument(CmsdkUtil.java:74)
         at be.kindengezin.cmsdk.CmsdkUtil.getDocumentMimeType(CmsdkUtil.java:91)
         at be.kindengezin.cmsdk.content.CmsdkContentServlet.doGet(CmsdkContentServlet.java:41)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    kind regards,
    Els

  • Disk Erase failed with the error- Operation timed out

    I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
    Anyone knows how to solve this question would be nice.
    Thanks

    Well give this a try:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
    And, try this for the software update issue:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
    "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • Agent Deployment, Operation Timed Out - Solaris v5.10

    Hello,
    The agent has been gray since we upgraded to 2012R2, living on agent version 1.4.xxx. I tried to push an update to the agent but it failed. When I attempt to manually start/restart the agent, I get the following error. 
    ~>/opt/microsoft/scx/bin/tools/scxadmin -start
    svc:/application/management/scx-cimd:default enabled.
    svcadm: Instance "svc:/application/management/scx-cimd:default" is in maintenance state.
    RETURN CODE: 3
    After this, I put the machine into maintenance mode, and took it back out, and again tried to restart the agent. No luck.
    When I navigate to the directory, it clearly appears the SCOM directory does not exist. 
    Then I followed up by deleting the agent off of the SCOM console and now I am trying to deploy the agent. However, I get the following error:
    Failed during SSH discovery. Exit code: -2147221248
    Standard Output:
    Standard Error:
    Exception Message:Operation timed out
    Any idea guys?

    Verify you have removed and cleaned up the agent from the Solaris system by running the following on it.
    pkgrm MSFTscx
    Check
    the following as well for error -2147221248
    Possible causes:
    (Case A)
    The user credential provided for agent deployment or certificate signing does not have a home directory
    (Case B)
    Sudo elevation was selected in the user credential input, but the user credential provided is not correctly configured to use passwordless sudo elevation or the required sudo elevation privileges were not granted for the user account used in discover
    Resolutions:
    (Case A)
    Verify that the user has a home directory at:  /home/<username> and that the user is able to write to this directory
    (Case B)
    Review sudo elevation configuration documentation and verify user configuration for sudo. 
    Note that passwordless sudo must be configured. 
    Regards,
    -Steve

  • TNS-12535 Operation timed out

    Hi
    I am working on IBM AIX, Oracle 10.2.0.4 version.
    Here I got the TNS-12535 error while running a report at particular time. (i.e 8:30 PM to 10:00 PM PST). But aftter this particular time it runs good.
    There is no errors found in alert log file. The below is the error found in the sqlnet.log file.
    Please help me to resolve this...
    Time: 18-FEB-2011 17:05:53
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 78
    nt OS err code: 0
    Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=host_name)(PORT=1521))
    nt OS err code: 0
    Thanks

    Hi,
    Nothing to investigate at the application side, there is everything to investigate at the network side.
    Check the below points.
    - is there any firewall in play
    - is there any Network Address Translation into play
    - have the correct ports been opened in the firewall
    - is Oracle using random return ports (by default Oracle always uses 2 tcp/ip ports, the first one fixed, and configured in tnsnames.ora, the actual communication takes place on a radom port. If that is a problem at your site you need to fix that)
    - You need to run netstat -r to identify which ports are actually used.
    - Pavan kumar N

Maybe you are looking for