Unable to download my MCP Certificate

Dear Team,
Please help me as I forgot my MCID and i don't have my access code. My required details given below please help me ASAP.
Name : Sunny
Date of Exam : Thursday, Jan 12, 2012
Candidate ID : SR7956766
Registration : V6ESYD5206
Thanks and Regards
Sunny

Hi, Sunny.
It is good that you have your Prometric ID and registration information. This information can be mapped back to your MCP ID account.
You can log into http://register.prometric.com. After logging in, click
Update Personal Information to view your email address. Make sure the email address that you have recorded on your Prometric profile is the same email address that you will use to log into the MCP site.
If you can't log into Prometric, call them. Here is the contact information for Microsoft exam candidates:
https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
Gather all the evidence you can and then contact your Microsoft Regional Service Center. Their email address is
[email protected]
You can also call them on the phone. Please use the following web page to find the correct contact information for help.
http://www.microsoft.com/learning/en-us/help.aspx.
Have all your evidence ready. This web page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get this figured out.
NOTE: This public forum is usually monitored by fellow IT professionals like you and me but not by Microsoft employees.
**NOTE: You may want to remove your personal information from this open forum for security best practices. Especially your Candidate ID and Registration number.
Good luck!
Best wishes, Davin Mickelson

Similar Messages

I am unable to download the Create Cloud desktop app

Please help, I am unable to download the Adobe Creative Cloud Desktop app. When downloading the exe file, it gets stuck trying to connect to the server.
T have exhausted all troubleshooting steps:
1. I have tested to make sure I am connected to the internet
2. I can access secure sites
3. I have checked my host files. there are no entries that referece activate.adobe.com
4. I have checked the GlobalSign Root CA certificate
I have turned off all firewalls and antivirus and still get stuck trying to connect to the server

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Code signing cert error using Digicert - Unable to build a valid certificate chain for the signer

Steps to fix this error on code signing adobe air using .p12 cert from Digicert - Unable to build a valid certificate chain for the signer
a. Open Firefox and browse to https://www.digicert.com/digicert-root-certificates.htm
b. On the middle of the page, download -
DigiCert Assured ID Code Signing CA-1
Valid until: 10/Feb/2026
Serial #: 07:F4:73:6F:AF:EF:40:8A:1F:66:40:F2:65:D1:0A:C1
Thumbprint: B170A10819BEA936905D719E643399783E1F4567
Download
c. Install the cert in Firefox
d. Once done, export again the code signing cert from digicert, through (click Firefox -> Preferences -> View Certificates -> HIghlight the digicert code signing cert -> click Backup)
e. Done, the newly exported file should now have the valid certificate chain and that should fix the error "Unable to build a valid certificate chain for the signer"
Even though this is from Digicert, this should also work for other Certificate Authority providers assuming you download your provider's root cert for code signing.
Regards,
Reigner S. Yrastorza

Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
If you are using RoboHelp, which version?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error message, unable to download App Store purchase

Made some purchases on the App Store, all downloaded successfully, but I'm unable to download SnapHeal from MacPhun; I got the message, "There was an error in the iTunes Store. Please try again later."
I tried downloading several times, went to Community Support, closest thread was headed, iTunes Store: "An unknown error occurred (-9808)" My error message did not include a reference number, but I followed instructions about setting the correct date & time and adjusting certificate settings, then restarting. I also repaired disc permissions, zapped the PRAM and restarted my iMac.
I'm still unable to download the purchase.

Thanks Eric, I'll work on the troubleshooting and contact link right now, below your message three other links look very promising:
Error Message 403
Error message when buying new apps
Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

I get a mesage when trying to download or update apps. "Unable to Download"

I am trying to update and download new apps. I get a error message - Unable to download Application - "app name" could not be downloaded at this time.
I went into my internet and added - http://www. apple.com certificate. I also tried process again with pop up and firewall off and still get message. Now I did keep everything the same and went off my wifi and downloaded one app and the others still give me the same message.
Anyone help?

If you are receiving a message that your iTunes account has been disabled and resetting your password does not resolve the issue, then you will need to contact iTunes Store Customer Support via http://www.apple.com/support/itunes/contact/

Enterprise PKI - Unable to download, error AIA and OCSP

I just added a subordinate CA to my environment and am trying to get these two errors worked out. The AIA location that points to my subCA's cert errors in pkiview.msc stating it is unable to download. I have checked the folder and it contains
the certificate and CRL. I also found that I am unable to download the cert by typing in the web address:
http://subCA.domain.com/CertEnroll/subCA.domain.com_subCA.crt
I'm not sure what I'm missing in my config that will get this to work. Both servers are running 2008 R2 Enterprise.
I am also getting an error message regarding my OCSP server. I am pointing OCSP to my Root CA, but there is an error regarding that location on my subCA; no error on Root.
Thank in advance.

Here is the output from the verify command. It looks like it is complaining about my OCSP certificate. I did modify the output a little to hide my actual domain information, so it may look a little weird.
Issuer:
CN=controller2
DC=domain
DC=domain
DC=com
[0,0]: CERT_RDN_IA5_STRING, Length = 3 (3/128 Characters)
0.9.2342.19200300.100.1.25 Domain Component (DC)="com"
63 6f 6d com
63 00 6f 00 6d 00 c.o.m.
[1,0]: CERT_RDN_IA5_STRING, Length = 7 (7/128 Characters)
0.9.2342.19200300.100.1.25 Domain Component (DC)="domain"
[2,0]: CERT_RDN_IA5_STRING, Length = 3 (3/128 Characters)
0.9.2342.19200300.100.1.25 Domain Component (DC)="domain"
[3,0]: CERT_RDN_PRINTABLE_STRING, Length = 11 (11/64 Characters)
2.5.4.3 Common Name (CN)="controller2"
63 6f 6e 74 72 6f 6c 6c 65 72 32 controller2
63 00 6f 00 6e 00 74 00 72 00 6f 00 6c 00 6c 00 c.o.n.t.r.o.l.l.
65 00 72 00 32 00 e.r.2.
Subject:
CN=test.domain.domain.com
[0,0]: CERT_RDN_PRINTABLE_STRING, Length = 20 (20/64 Characters)
2.5.4.3 Common Name (CN)="test.domain.domain.com"
Cert Serial Number: 141693c100000000003c
3c 00 00 00 00 00 c1 93 16 14
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_IS_REVOKED (0x4)
ChainContext.dwRevocationFreshnessTime: 5 Days, 2 Hours, 30 Minutes, 4 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_REVOKED (0x4)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 2 Hours, 30 Minutes, 4 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=4
Issuer: CN=controller2, DC=domain, DC=domain, DC=com
NotBefore: 6/23/2014 8:32 AM
NotAfter: 6/16/2016 8:23 AM
Subject: CN=test.domain.domain.com
Serial: 141693c100000000003c
SubjectAltName: DNS Name=test.domain.domain.com
Template: WebServer
4c 5a b9 ab 87 80 3e df ed 9a 7f da be 59 d6 98 05 af ab e4
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_IS_REVOKED (0x4)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=controller2,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=domain,DC=domain,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] http://controller2.domain.domain.com/certenroll/controller2.domain.domain.com_controller2.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (0b)" Time: 0
[0.0] http://controller2.domain.domain.com/CertEnroll/controller2.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
http://controller2.domain.domain.com/ocsp/MEswSTBHMEUwQzAJBgUrDgMCGgUABBTGYfObkkJSqlANW1AVyWfI%2bjrNwwQUWjvx6odKhuGe8jdbNqX%2bJAnRVFYCChQWk8EAAAAAADw%3d?Content-Type: application/ocsp-request
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
Application[0] = 1.3.6.1.5.5.7.3.9 OCSP Signing
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=40
Issuer: CN=Controller1, DC=domain, DC=domain, DC=com
NotBefore: 6/20/2014 4:33 PM
NotAfter: 7/4/2014 4:33 PM
Subject: CN=CONTROLLER2.domain.domain.com
Serial: 1019856900000000006a
SubjectAltName: DNS Name=CONTROLLER2.domain.domain.com
Template: OCSP Response Signing
f4 6e 96 24 8d be 3d bc aa 0a 19 4b 7e 42 36 00 45 58 b3 b7
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Application[0] = 1.3.6.1.5.5.7.3.9 OCSP Signing
CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=Controller1, DC=domain, DC=domain, DC=com
NotBefore: 2/11/2014 4:26 PM
NotAfter: 2/11/2024 4:36 PM
Subject: CN=Controller1, DC=domain, DC=domain, DC=com
Serial: 36abd79a207463a4405ab6c1c19788a2
8e 12 c3 6a 9c 8b 35 db 70 27 64 14 ee d7 bf a4 a1 32 88 bf
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Exclude leaf cert:
f4 6e 96 24 8d be 3d bc aa 0a 19 4b 7e 42 36 00 45 58 b3 b7
Full chain:
e6 d2 e8 eb a8 69 77 27 cc b8 37 24 de d5 00 4b 9a 88 5b ba
Issuer: CN=Controller1, DC=domain, DC=domain, DC=com
NotBefore: 6/20/2014 4:33 PM
NotAfter: 7/4/2014 4:33 PM
Subject: CN=CONTROLLER2.domain.domain.com
Serial: 1019856900000000006a
SubjectAltName: DNS Name=CONTROLLER2.domain.domain.com
Template: OCSP Response Signing
f4 6e 96 24 8d be 3d bc aa 0a 19 4b 7e 42 36 00 45 58 b3 b7
The revocation function was unable to check revocation for the certificate. 0x80092012 (-2146885614)
Verified "OCSP" Time: 0
[0.0] http://controller2.domain.domain.com/ocsp
CRL 0b:
Issuer: CN=controller2, DC=domain, DC=domain, DC=com
c6 42 3a 4c 2e a0 49 5b 0d 99 b4 9f 27 13 12 ea c4 e9 c0 6d
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=Controller1, DC=domain, DC=domain, DC=com
NotBefore: 6/16/2014 8:13 AM
NotAfter: 6/16/2016 8:23 AM
Subject: CN=controller2, DC=domain, DC=domain, DC=com
Serial: 15b2082c000000000043
Template: SubCA
f0 04 e9 b9 1f 65 fe 01 3f bb 77 f7 9d 64 4e 38 9b 1f 06 32
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=Controller1,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=domain,DC=domain,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] http://controller1.domain.domain.com/CertEnroll/Controller1.domain.domain.com_Controller1.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (55)" Time: 0
[0.0] ldap:///CN=Controller1,CN=Controller1,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=domain,DC=domain,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
http://controller1.domain.domain.com/ocsp/MEswSTBHMEUwQzAJBgUrDgMCGgUABBSWFpoon%2bP%2b4F2xce34%2bLAmIUiu2QQUihnqzDjKy9KFeEFWkyQQc6W%2fpuUCChWyCCwAAAAAAEM%3d?Content-Type: application/ocsp-request
Verified "OCSP" Time: 0
[0.0] http://controller1.domain.domain.com/ocsp
CRL (null):
Issuer: CN=Controller1.domain.domain.com
9c f8 ad 7d 8f 87 a5 ff 0c 97 3d d2 97 ea 1b bb 8a e9 10 ff
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=Controller1, DC=domain, DC=domain, DC=com
NotBefore: 2/11/2014 4:26 PM
NotAfter: 2/11/2024 4:36 PM
Subject: CN=Controller1, DC=domain, DC=domain, DC=com
Serial: 36abd79a207463a4405ab6c1c19788a2
8e 12 c3 6a 9c 8b 35 db 70 27 64 14 ee d7 bf a4 a1 32 88 bf
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Exclude leaf cert:
61 c5 e7 bb 4a ad 0e 34 37 15 21 85 6b f1 54 1d d6 39 85 48
Full chain:
d2 0d 42 d5 79 28 59 8f ab 2b 83 15 7d f2 6d 46 57 46 b4 ac
Issuer: CN=controller2, DC=domain, DC=domain, DC=com
NotBefore: 6/23/2014 8:32 AM
NotAfter: 6/16/2016 8:23 AM
Subject: CN=test.domain.domain.com
Serial: 141693c100000000003c
SubjectAltName: DNS Name=test.domain.domain.com
Template: WebServer
4c 5a b9 ab 87 80 3e df ed 9a 7f da be 59 d6 98 05 af ab e4
The certificate is revoked. 0x80092010 (-2146885616)
Certificate is REVOKED
Leaf certificate is REVOKED (Reason=4)
CertUtil: -verify command completed successfully.

Unable to install SAP Passport certificate

I'm getting exactly the same problem that Nancy Ruff was in thread 439036, "Not able to install SAP Passport certificate". That is, every time I try to download the certificate I get to the error page asking to set the flag to allow ActiveX controls to run. A 'partial' certificate is installed, but it doesn't work properly and has to be removed each time.
I'm running IE6 SP2 and have checked all the settings indicated (as Nancy did) and they are all OK.
Unfortunately, her solution was to remove NTuser.DAT and log in again (to recreate it). I can't do this as it will lose all other registry settings, so I need to find out what the problem actually is.
Can anyone help?
Derek Dongray.

Hi,
If you are unable to configure SAP passport certificate due to ActiveX issues, I recommend you download and install Internet Explorer ActiveX update. This works for Windows XP and Vista also (If you have IE 7 too). See the website below:
http://support.microsoft.com/kb/912945
Reward if the issue is resolved
Rgds,
Raghu

PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"

I am trying to create a PKI infrastructure on winserver2008R2 enterprise as follows
offline ROOT CA---Standalone
Online Intermediate CA -- enterprise
PROBLEM:
on the intermediate CA: using enterprise PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"but enterprise pki view "manage AD container" indicated the AIA and CDP container
had OK for the root CA CDP and AIA.
Any help will be appreciated
INSTALLATION STEPS :
i performed the ffg on offline RootCA
create the CA policy policy file and store in windows folder
install ADCS
run post installation script
The Certificate Service was successful and saw a green icon in the console
I performed the ffg on online enterprise CA
create the CA policy policy file and store in windows folder
install ADCS
i successfully published the root CA cert and CRL in the local store and AD. i saw the ffg message upon completion
CertUtil: -addstore command completed successfully.
CertUtil: -dsPublish command completed successfully.
install ADCS
below is the output for getreg ( CRL and AIA)
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CRLPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CRLPublicationURLs:
CRLPublicationURLs REG_MULTI_SZ =
    0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
    CSURL_SERVERPUBLISH -- 1
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
    1: 79:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
    CSURL_SERVERPUBLISH -- 1
    CSURL_ADDTOCERTCDP -- 2
    CSURL_ADDTOFRESHESTCRL -- 4
    CSURL_ADDTOCRLCDP -- 8
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
    2: 0:http://%1/CertEnroll/%3%8%9.crl
    3: 0:file://%1/CertEnroll/%3%8%9.crl
    4: 65:file://\\www\Certdata\%3%8%9.crl
    CSURL_SERVERPUBLISH -- 1
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
CertUtil: -getreg command completed successfully.
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CACertPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CACertPublicationURLs:
CACertPublicationURLs REG_MULTI_SZ =
    0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
    CSURL_SERVERPUBLISH -- 1
    1: 3:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
    CSURL_SERVERPUBLISH -- 1
    CSURL_ADDTOCERTCDP -- 2
    2: 0:http://%1/CertEnroll/%1_%3%4.crt
    3: 0:file://%1/CertEnroll/%1_%3%4.crt
CertUtil: -getreg command completed successfully.

when i ran certutil -URL http://www.goryeal.com/CERTDATA/GROOTCA.crl
i saw a status message of OK
when i paste the url(http://www.goryeal.com/CERTDATA/GROOTCA.crl) from pki view in the browser i got the message:
404 - File or directory not found
But when i copy the url(http://www.goryeal.com/CERTDATA/) in the browser , i was able to see the root ca CRL :
I revoked CA exchange cert and issue a new one but still no luck. Below is the verification for the ca exchange cert:
certutil.exe -verify -urlfetch
c:\ca.cer
Issuer:
    CN=GINTCA
    DC=goryeal
    DC=com
Subject:
    CN=GINTCA-Xchg
    DC=goryeal
    DC=com
Cert Serial Number: 61db778400000000000b
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GINTCA, DC=goryeal, DC=com
NotBefore: 4/2/2014 5:00 PM
NotAfter: 4/9/2014 5:10 PM
Subject: CN=GINTCA-Xchg, DC=goryeal, DC=com
Serial: 61db778400000000000b
Template: CAExchange
Template: CA Exchange
5f c7 75 f7 e9 da 4b 96 ea 05 48 f2 2f 49 0d 96 b8 d0 f7 16
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (06)" Time: 0
    [0.0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP
OK "Delta CRL (06)" Time: 0
    [0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Certificate OCSP
No URLs "None" Time: 0
    CRL 06:
    Issuer: CN=GINTCA, DC=goryeal, DC=com
    bc c0 e1 8c e1 4c 18 34 5f 06 ca c1 f2 a0 3b 4d 58 9f 27 70
    Delta CRL 06:
    Issuer: CN=GINTCA, DC=goryeal, DC=com
    69 cf 42 09 59 48 3f 07 bf b7 8a 4c 01 a6 45 5f 13 87 da 1b
Issuance[0] = 1.2.3.4.1455.67.89.5
Application[0] = 1.3.6.1.4.1.311.21.5 Private Key Archival
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/26/2014 8:01 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GINTCA, DC=goryeal, DC=com
Serial: 1297cd88000000000004
Template: SubCA
a4 96 15 fd 62 c1 1c 86 db 21 15 a7 d4 b4 0e 16 8f 03 2c de
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
    [0.0] ldap:///CN=GROOTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
    [1.0] http://www.goryeal.com/Certdata/ROOTCA_GROOTCA.crt
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
    [0.0] ldap:///CN=GROOTCA,CN=ROOTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Failed "CDP" Time: 0
    Error retrieving URL: Error 0x80190194 (-2145844844)
    http://www.goryeal.com/Cerdata/GROOTCA.crl
---------------- Base CRL CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
    CRL 06:
    Issuer: CN=GROOTCA
    f7 3d fb a7 12 bf f1 b5 e9 35 b7 a1 2b 17 2a 28 29 36 c6 8a
Issuance[0] = 1.2.3.4.1455.67.89.5
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/20/2014 8:28 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GROOTCA
Serial: 2157e0150f7e149e49295666612464ef
b5 a8 4c e1 64 9d b0 aa c5 e4 b7 b0 4f 5e fe e3 99 aa 61 de
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
No URLs "None" Time: 0
---------------- Certificate CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
Issuance[0] = 1.2.3.4.1455.67.89.5
Exclude leaf cert:
e8 5b f7 0b 59 b4 84 97 87 96 1b f1 39 9b 15 14 24 84 d0 77
Full chain:
ca 29 87 01 d8 6f e6 28 d7 16 a9 5c 81 74 d3 b8 1e c9 44 53
Verified Issuance Policies:
    1.2.3.4.1455.67.89.5
Verified Application Policies:
    1.3.6.1.4.1.311.21.5 Private Key Archival
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.

N73 Probs, unable to download games, themes and ph...

I am unable to download almost anything other then ringtones and wallpapers to my N73, it says certificate error whenever i try? Phone also says "memory ull please close some applications" even when I dont have anything running, it has a 2GB memory card with 1784MB free, plus 38252kB free on phone memory, phone is very slow opening menu's.I have latest software V 3 from jan 2007

What apps are you trying to download? If you are unable to purchase apps from Ovi store you need to have a look at this thread /t5/Ovi-com-Ovi-Store-Ovi-Share-and/I-am-not-able-to-download-paid-application-from-Ovi-Store/m-p/10...
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

"unable to download" message

Dear All
i want to Distributing Enterprise Apps for IPAD Wirelessly but we get “unable to download” message
iam using the help link : http://developer.apple.com/library/ios/#featuredarticles/FA_Wireless_Enterprise_ App_Distribution/Introduction/Introduction.html
and i check for these Troubleshooting Wireless App Distribution
If wireless app distribution fails with an “unable to download” message, check the following:
Make sure the app is signed correctly. Test it by installing it on a device using iPhone Configuration Utility.
Make sure the URL to the app (.ipa) file (in the manifest file) is correct and the app file is accessible to web users.
Make sure the link to the manifest file is correct and that the manifest file is accessible to web users.
but still the same error can any one help me ?

That seems like an unusual issue. I would make sure you update to iOS 4.3.5, hopefully if your devices are on the latest build they will take the apps. Otherwise it sounds like an issue with your digital certificate, and I would try to create a new certificate through apple.

Unable to Download App (Enterprise Signed)

The enterprise signed distribution app that I recently created with DPS App Builder will not install remotely (via link).
The link opens the HTML page. Asks me if I would like to install the app, then nothing.
I click the home button and can see the app install progress dial complete, then:
Error message "Unable to Download App: "name of app" could not be installed at this time".
I have tried on several iPads connected to different networks and always receive the same message.
However, I was able to install via iTunes with the device connected to the computer.

HI,
There was a change to the way in which you are allowed to deliver apps, I think you need SSL certificates installed on the web server to be able to install from a URL.
I was in the same scenario as you are, and used Charles Proxy to see the errors coming from the device when i tried to install.
http://stackoverflow.com/questions/20276907/enterprise-app-deployment-doesnt-work-on-ios-7 -1
Thanks,
David.

Obtaining a printed MCP certificate

I was in a friends office the other day and noticed that he had an actual MCP certificate on display. I became an MCP in 2011 but never received a printed MCP certificate. How can I get a printed MCP certificate?
I've tried to visit the MCP site but it only puts me into Microsoft Learning and there are not related options there. I've also visited the Certiport site but that only provides copies of each exam's certifications.

Several years ago, Microsoft mailed to you a printed certificate along with other goodies (such as a wallet card) when you got a new certification. But now they no longer send this welcome package. If you want a printed certificate, you need to either
download the PDF or XPS file and print it yourself, or pay to have it sent to you (If I recall correctly, it costs somewhere around $10). Both options can be accessed from the MCP portal (www.microsoft.com/mcp)
after you login with the liveId that is associated with your MCP.

Unable to download Flex Builder 3.0.2 Professional Eclipse Plug-in Trial

Since yesterday I am unable to download the Flex Builder plugin for eclipse, having tried all the combinations of Language/OS available for this product, browsers and two different PCs at my home.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=flex_eclipse
Using the link above the case is always the same no matter what browser/computer. After the "Download" button is pressed the website "freezes" for about 30 seconds, then it refreshes and soon an email message arrives with the title
"Helpful links and resources for your Flex Builder 3 Professional Trial".
Furthermore when I visit a link provided in the email Getting Started - Flex 3 Getting Started - Adobe Learning Resources, all the hyperlinks such as Watch, Full Tutorial, Download Project, PHP and Java will simply redirect me to the very same page (i.e. the one provided in this sentence).
I'd appreciate any help given on this matter, thanks.

Moving this discussion to the Flex Builder plug-in forum.

Unable to download new songs from iTunes

I have iTunes 7.6.2 and when I plug in my iPod I get 'syncing' then 'its ok to disconnect' message and I'm unable to download new songs I just bought. I tried this on 2 computers and the same results. One is running XP Pro SP1 and one is running Vista SP1 and the same issue with both pc's.
Any suggestions?

iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
Upgrade OS X on your Mac.

Unable to download FF on new computer

I have a new computer with Windows 7, and I am unable to download FF at all. It acts like it's downloading, but I am repeatedly getting the message the download has been interrupted. I have already tried downloading the localized version from https://www.mozilla.org/en-US/firefox/all/?q=English%20(US), and I got the same message.

'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]'''
If need, go to another computer. '''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link} to a thumb drive. Then install it when you get home.

Unable to download my MCP Certificate

Similar Messages

Maybe you are looking for