Unable to download SCOM 2012 setup

Dear Experts,
I am not able to download SCOM 2012, SP1 and R2 versions from Microsoft.
I found a link for 180 days evaluation period but that is noe related to operation Manager I guess.
I request you all to please provide the correct path to download all the 3 versions of SCOM 2012.
Thanks,
Saravana
Saravana Raja

System Center 2012 SP1 trial
http://technet.microsoft.com/en-US/evalcenter/hh505660.aspx
System Center 2012 R2 trial
http://msdn.microsoft.com/en-us/library/dn205295.aspx
Roger

Similar Messages

Hi Need to download SCOM 2012 iso file for lab

Hi all
can anyone provide me link from where i can download SCOM 2012 iso as i tried
to download from
http://www.microsoft.com/en-us/download/details.aspx?id=36424 there are multiple files
which one i should download for lab environment.I want to set up Lab for SCOM in Vmware workstation.

This download link for SCOM VHD Lab not SCOM Source ISO,
You can register here and get download link for all system center, you can select only SCOM.
http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2
Regards, Ibrahim Hamdy

SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012? Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices. We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue. I made sure they were set to SNMP only. I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from. Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process. We have tried having SNMP installed, but disabled, installed and running, and uninstalled. Currently we have the SNMP service installed and running. The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server. I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator. I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor. We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule. The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices. No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

SCOM 2012 Installation fails while deploying Datawarehouse

Hi All,
I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
Screenshots:
Error logs
Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:08:57]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:08:57]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:08:57]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:08:57]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:08:57]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:08:57]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:17]: Info:
:Info:trying to connect with server My management server
[01:09:26]: Info:
:Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
[01:09:26]: Error:
:Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
Check the event log for more information.
[01:09:26]: Error:
:StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:09:26]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:09:26]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:09:26]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:09:26]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:09:26]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:09:26]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:46]: Error:
:Error:Could not connect to management group. Can not continue with DW upgrade...
[01:09:46]: Info:
:Info:got MG connection
[01:09:46]: Error:
:Error:Could not connect to management group. Cannot continue with current action...
[01:09:46]: Error:
:FATAL ACTION: GetManagementGroup
[01:09:46]: Error:
:FATAL ACTION: DWInstallActionsPostProcessor
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate returned false.
[01:09:46]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[01:09:46]: Info:
:SetProgressScreen: FinishMinorStep.
[01:09:46]: Always:
:!***** Installing: OMCONSOLE ***
[01:09:46]: Info:
:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[01:09:46]: Always:
[01:09:46]: Always:
:****Starting*RollBack*******************************************
[01:09:46]: Always:
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Debug:
:ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor. Launching it now.
[01:09:46]: Always:
:Determining actions to be run.
[01:09:46]: Always:
:Done validating action list; now running individual actions.
[01:09:46]: Always:
:Current Action: UninstallPrePreprocessor
[01:09:46]: Info:
:UninstallPrePreprocessor completed.
[01:09:46]: Always:
:Current Action: UpgradePreprocessor
[01:09:46]: Info:
:UpgradePreprocessor completed.
[01:09:46]: Always:
:LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:
[01:09:46]: Info:
:SetProgressScreen: Init Exe Install progress.
[01:09:47]: Always:
:LaunchExeSetup: Install return value was: 0
[01:09:47]: Info:
:CheckPointPassed is removing the Rollback property as this is an uninstall.
[01:09:47]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
Gautam.75801

Hi All,
So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
Legend: SCOM Server - SCOMSVR.Contoso.com
DNS Domain: Contoso.com
SDK Account: SDKSVC
To add SPN for the SDK Service:
===================================
In Win2k 12
setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
In Win2k8
setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
To verify the SPN's
============================
1. setspn -L MS Host name without FQDN
Ex: setspn -L SCOMSVR
2. setspn -L Domain\DSK Action account
Ex: setspn -L Contoso\SDKSVC
Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
Example: The below entry should not appear when you enter setspn -L SCOMSVR
MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
Ex: MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR
To delete a SPN if required:
===============================
setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Gautam.75801

SCOM 2012 unable to monitor servers

I have build a SCOM 2012 POC, post sql & SCOM installation am not able to monitor any servers.
I have added servers for agent monitoring. I had tried importing few management packs also. but i dont servers in the any monitoring alerts views. i have waited for 2 or 3 days too but unable to see any servers.
Please suggest me what are the must have management packs for SCOM 2012 for windows 2008 and 2012 monitoring.
Do we need to patch or install any hotfix for this to work am not sure..
Any help would be appreciated.
Thank you,
ndraj

1) check whether those server is under scom monitoring: operations console --> administration worksace --> Device Management --> Agent Managed --> whether you see your server is under this view and its health state is healthy(Green check mark)
2) monitoring Windows Server 2008 and 2012: you should download
System Center Managment pack for Windows Server Operatng System, its current version is 6.0.7061.0.
3) Run as account: specify credentials for specific computers
4) Run as profile: When a workflow requires rights and privileges that the default action account cannot provide, the workflow can be written to use a Run As profile. A Run As profile can have multiple Run As accounts associated with it.
http://technet.microsoft.com/en-us/library/hh212714.aspx
Roger

Unable to monitor SLES 10 SP4,SLES 11 SP3 and SLES 11 SP2 via SCOM 2012 R2

Hi ,
I am unable to get SLES 10 SP4, SLES 11 SP3 and SLES 11 SP2 under SCOM 2012 R2 monitoring. The PAM ,glibc and openssl are at the right versions.
Per the documentation SCOM MP for unix/Linux provides monitoring of SUSE Linux Enterprise
Server 9, SUSE Linux Enterprise Server 10 SP1, and SUSE Linux Enterprise Server 11 operating systems. Does this mean it cannot monitor SP2, SP3 and SP4 for the same Operating systems?
Plat form not supported is the error which I get.
Thank you much,

There should not be any problems with monitoring SLES 10 SP4 or SLES 11 SP2/SP3. If you are getting a "platform not supported" error, it may be that the right management packs have not successfully imported. Can you give more details on when
you get the error, and the management pack versions that you have installed? And what Update Rollup (UR) for OpsMgr do you have installed? The latest is UR4, and the Linux/UNIX management packs for UR4 are here:
http://www.microsoft.com/en-hk/download/details.aspx?id=29696 . Be sure to download the version for "R2".
Michael Kelley, Lead Program Manager, Open Source Technology Center

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

TS3297 Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine. However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help pleas

Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine. However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help please?

So it appears iCloud/iTunes Match isn't the issue - the error message would seem to be complaining about where the music is being downloaded to. So with this in mind:
In iTunes select Preferences and select Advanced. The iTunes media folder should be set to /Users/<your account>/Music/iTunes/iTunes Music. <your account> would be whatever your user account is. If you see something else there I'd guessing it is a folder you don't have permission to write to.

TS5376 After following all the instructions to remove itunes and reinstall I am still unable to download Itunes setup

I have followed all the instructions for uninstalling all the componets of Itunes in order to reinstall Itunes but I am still unable to download Itunes installer or setup. How do I fix this issue?

I couldn't download from the normal download link provided (http://www.apple.com/itunes/download/), but I searched the internet and found this link from apple support that worked for me to download iTunes 11.1.4 for Windows (64-bit): http://support.apple.com/kb/dl1615

Difference between Scom 2007 and Scom 2012 Gateway server setup.

Hi All,
Greetings!!
I would like to know the differences for gateway server setup in Scom 2007 and 2012 versions..
Are there any changes in the data collection or in the configuration? and also the prerequisites for it.
Please let me know these info..
Regards,
Gokul

There is no great different in settng up gateway server in SCOM 2007 R2 and SCOM 2012. As summary, it requires
1.Request certificates.
2. Import those certificates into the target computers by using the MOMCertImport.exe tool.
3. Distribute the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe to the management server.
4. Run the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe tool to initiate communication between the management server and the gateway
5. Install the gateway server.
However, the prerequisites has different between SCOM 2007 R2 and SCOM 2012
SCOM 2007 R2 gateway server support folloiwng OS
Windows Server 2003 Standard Edition with Service Pack 1 (SP1)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2)
Windows Server 2003 Standard x64 Edition with SP1 or SP2
Windows Server 2003 Enterprise Edition with SP1
Windows Server 2003 Enterprise Edition with SP2
Windows Server 2003 Enterprise x64 Edition with SP1 or SP2
Windows Server 2003 R2 Standard Edition with SP1 or SP2
Windows Server 2003 R2 Standard x64 Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise x64 Edition with SP1 or SP2
Windows Server 2008 Standard 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Standard with SP1 or SP2
Windows Server 2008 Enterprise 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Enterprise with SP1 or SP2
Windows Server 2008 Datacenter 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Datacenter with SP1 or SP2
Windows Server 2008 R2
Windows Server 2008 R2 with SP1
SCOM 2007 R2 gateway server
CPU :2.8 GHz or faster
Memory: 2 GB of RAM or more
available Space: 20 GB of available hard disk space
NET Framework 2.0
Microsoft Core XML Services (MSXML) 6.0
SCOM 2012 Gateway server
Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.
Server Operating System: must be Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 Core Installation or Windows Server® 2012 R2.
Processor Architecture: must be x64.
Windows PowerShell version: Windows PowerShell version 2.0, or Windows PowerShell version 3.0.
Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.
.NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.
Roger

Unable to add a performance widget to a dashboard in SCOM 2012

When trying to select a group or object when attempting to configure a new performance widget within a SCOM 2012 dashboard, I get the following error. Anybody any ideas what is causing this issue in my instance of SCOM 2012?
This is part of a custom built Management Pack and a Distributed Application linking just three computers together.
Any help would be welcomed.
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not produce
a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support
Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String languageCode,
InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)

What is your SCOM version and patch level?
For SCOM 2012 SP1, there is known issue that:
When you select objects on the dashboard, you receive the following error message:
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not produce
a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions.
This can be resolved by apply UR4
https://support.microsoft.com/en-us/kb/2879276/
Roger

SCOM 2012 unable to monitor SNMP traps

After installing SCOM 2012 I did not
get the SNMP Trap. I tried the solution
of the topics http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/6826f6a6-bbc3-444b-9b18-288d7fedac3e Nothing
has helped.
Help please, why SCOM can
not take Traps?

We had the an issue where device was sending SNMP v1 traps as per Wireshark but the device was discovered as a SNMP v2 device. We forced the device to be discovered as a SNMP v1 device and that worked.
To do so, after you add the device that needs to be discovered within the discovery rule, export the MP called Network Discovery Internal. Open this in notepad and browse to the IP address of your device that needs to be discovered. Change the value for
"AutoDetect" to v1 in case you want to discover his as a V1 DEVICE. Then you will be able to receive traps from the said device that got discovered.
<SeedSystem>
                  <SeedIPorName>10.100.x.x</SeedIPorName>
                  <Version>AUTODETECT</Version>
                  <SNMPPort>161</SNMPPort>
                </SeedSystem>
Hope this helps.
Kapil Dham

SCCM 2007 - Unable to download Windows Server Std 2012 Patches

I am having issues downloading Windows 2012 Std Patches but with 2012 R2 it is fine. I have to do it through WSUS which is on a separate server to get it work correctly. Anyone else experiencing the issue

Is this a CM07 or a WSUS question?
http://www.enhansoft.com/

How to setup Tiering with SCOM 2012 class libraries?

Hi All,
I've two SCOM servers installed in two different machines and SCOM will have some alerts. I want to connect the two so that one acts as top tier and other one as lower tier. The top tier will show all the alerts from the lower tier in
the connected alerts. From there I'm passing the alerts to external system for processing. I want to establish the tiering programmatically using the SCOM 2012 API. I know of method
TieringManagement.AddTier Method (String, ManagementGroupConnectionSettings, SecureData, Boolean)
Help me how can I achieve this by using the above method.
Thanks in advance.
viRa

To configure method TieringManagement.AddTier Method, you can refer to below links
http://msdn.microsoft.com/en-us/library/hh332072.aspx
http://msdn.microsoft.com/en-us/library/hh350608.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

Unable to download SCOM 2012 setup

Similar Messages

Maybe you are looking for