Unable to download using ports with usb cable after ios7 upgrade

Why doesn't the compuetr recognize other devices using usb cable to download media?

Hi neocec!
I have a couple of suggestions for you that will help you troubleshoot this issue. First, you should try to reset the iOS device by following these instructions:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If you are still experiencing issues after attempting that troubleshooting step, you will want to restore your iOS device according to these instructions:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

After I went to iOS 7.0.3 can't use hotspot with usb cable

Hello All
After upgrading to iOS 7 on my iphone 4 I can no longer use my personal hotspot with a usb cable (wifi connection works)
When I go to system preferences>Network>Ethernet (Macbook Pro ...0S 10.6.8 )
It says "cable unplugged " but it is plugged because I can charge and transfer data using this cable
Here is what I've tried so far on my Macbook Pro with OSX 10.6.8 and my iphone 4
Tried a different cable ..... did not work
Made ethernet setting inactive and active again .. did not work
Deleted Ethernet setup and and created it again .. did not work
Reset the iphone network settings twice did not work
So what now ?
I don't like the iOS 7 its slower and I am having another problem too
Thanks All

I am having the same problem. I have a normal iphone4 and when I upgraded to ios7, suddenly no one can hear me on calls. It works with speakerphone and on a headset, and I can play music normally. It has to be software, or else why would speakerphone work? My phone also functioned just fine before this upgrade and now my phone is useless as a phone.

Help with using itunes with 4s library after i upgraded to iPhone 5 and computer power supply went

long story hopefully an easy fix....
on wensday my power supply went and had to ship computer across country to Puget Computer Systems as we weren't sure if it was power supply or mobo...luckily it was power supply.
i daily backed up iphone 4s with itunes (10.7) as i do all music manually, playlists, etc. have like 3,000 plus songs, videos, audiobooks, mail aaccts and about 48 apps.
so next day (sept 19th) apple comes out with iOS 6 which i update my 4s to with no problem. I wanted a day to play with it to learn my way around.
next day i wait in line for 8 hours overnite and was #2 in line at apple store for my ATT 32gb white iPhone 5. while at apple store I get my icloud backup which gets all paid music,apps, etc since itunes version 10.3 (i always did both backups so as not to lose my contacts more than anything.
I have other paid stuff that is in library on computer along with audiobooks and about 2700 more songs.
my icloud backup put the playlists on iPhone but not most of the music for them as lots were ripped from my cd's.as i double them up making a copy on iPhone and a copy on itunes.
So I have been using iPhone 5 with no problems just don't have all of itunes library on it. My computer is coming back this week how do I plug in iPhone 5 via USB (which will be seen as new phone even though it has same name) and use my existing iTunes 10.7 library which the backups in iTunes still has iOS 5.1.1 on it?
There must be an easy way of doing it as i don't want to wipe off iphone 5 again as i don't see any purpose my library is all organized perfectly. I know my way around windows 7 pro 64 bit pretty well just don't know what itunes is going to say once it sees "joe's iPhone" again and installs the usb drivers and icon for it. what will it ask in regards to library and how do i use it with previous iOS on it?
Thank you very much for the help as I am going to need it.
yes i broke the cardinal rule of cross posting and apoligize for it just amazed i couldn't find answer via google nor any apple store genius knew it either.

Hi All,
Any help?
No one has any answers here amoungst all this apple knowledge?
Thank you

My Jabra Cruiser2 no longer syncs with my iPhone after iOS7 upgrade

After I upgraded my iPhone 4s to iOS 7 and 7.0.2, I am unable to discover or sync my Jabra Cruiser2 to my phone via bluetooth.
I also bought the 5s and the Jabra Cruiser2 is not discovered when I go into discovery mode for bluetooth.
Is there a fix for this?

evo_ae86 wrote:
hi i am having the same problem, when i upgrade my iphone 4 to ios 7.0.4, it couldn't search anymore my jabra talk via bluetooth. appreciate if you can help me. thanks
Okay, did you try what I already suggested to EJAXX02? That is, delete the pairing profile, then make absolutely sure that the jabra talk is itself in discoverable mode, and try re-pairing them? Both devices need to be in discoverable mode, and you may have to force the jabra into it - most devices, once paired, do not automatically enter discoverable mode when subsequently powered on. They have to be forced back into discoverable mode to re-pair them to anything.

IMessage on iPhone5 works only with email account after IOS7 upgrade

After upgrading to IOS7 I am unable to select my phone number within iMessage.
Now all my messages or going only from ONLY my email addresses

Have you tried turning messages off and back on again? That suggestion in another thread (23036542) worked for me.

My mac has10.5.8 and should be compatible with new HP officejet pro 8600. I can't get it to install for wireless, nor to work with USB cable. Have tried downloading HP install directly from HP and it still doesn't work.

I just bought a new HP OfficeJet Pro 8600 printer. I have been unable to download the installation for wireless connection even though have had the assistance of Costco tech, HP tech and some advice from Apple. Because the system is MacOs 10.5.8 the error says it is incompatible, even though the product lists compatiblilty with 10.5, 10.6. I was advised 1 option might be to obtain Snow Leopard for installation, however am somewhat reluctant as the bo states 10.5 should work and Snow Leopard is 10.6, which is also listed as compatible. I am unable to get the printer to work even with USB cable. Too much time spent on this and I hate to start over with another printer because I'm afraid I might have the same trouble. Is Snow Leopard something I should get anyway? Help!

Snow Leopard has more compatible Java.
https://discussions.apple.com/docs/DOC-2455
explains more about upgrading to Snow Leopard.
If that doesn't work to fix the problem, then see my FAQ* on printing:
http://www.macmaps.com/printersx.html

Using AC adapter to charge is better than charge it with USB cable?

I've been reading this on http://www.ipodbatteryfaq.com/
"When possible, always use the AC adapter (or vehicle adapter) for extended charging, not a FireWire cable attached to a computer."
The artical does not explain why, but I'm curious about it.
So, does charging iPod with USB cable really damage the battery?
Is it always better to charge iPod with AC adapter?
Any answer will be appreciated, thanks in advance anyway

Even if you use an a/c adaptor you still need the usb cable to connect it to the iPod. The very same cable you use to connect to the computer.
A firewire cable is something completely different, and although the 5th gen iPod will charge via a firewire cable they are not supplied with the iPod (because the iPod won't accept data transfer via firewire).
When reading about the iPod battery, you should remember that there is an awful lot of nonsense said. I've never found any difference whatsoever either charging via a mains adaptor or via a computer.

HT201441 I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but st

I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.

delete the email account and try again

Read out from OBD-II Freematic Emulator using ELM327 with USB and LabView

Hello. I have an Freematic OBD-II mk2 emulator which simulates diagnostics of a real car. I have connected an ELM327 diagnostic device with USB cable to the emulator and a PC. The connection between emulator, diagnostic device and computer works. Now I need to read out parameters in LabView. How do I do it? I tried to use the NI VISA functions, but didn't manage to read out anything sensible. How can I for example read out Engine RPM? Do you have some example code?
I want to avoid using Automotive Diagnostic Command Set, because it's to expensive for me.

Oh yes, I didn't realize what this hardware does. Some beginners think that a DB9 is a standard interface for a CAN bus, and when they see the DB9 serial port on their computer they think they can just use that. I was worried this was what you were attempting.
So yes VISA is the right way to go. Once you have this device installed and recognized in Windows it should appear as a COM port. You can open the Windows Device Manager and by plugging and unplugging your device you should see a COM port appear and disappear.
Assuming you do launch LabVIEW and go to the example finder and search for Simple Serial. This is an example VI that can send serial data to a COM port, wait, then read the response. It can basically work like hyperterminal. Assuming there are no already made LabVIEW drivers (I haven't seen any) this will be a good place to start. Using documentation on your hardware you can start to come up with commands to do things like read and write CAN data, by sending the appropriate commands to the hardware over serial.
http://www.elmelectronics.com/obdic.html
Depending on what you want to do it might be a decent amount of work. Of course if you do get anything good and working feel free to post your progress here so others can benefit.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Can I use iphone 4s USB cable to recharge for the new ipad

Can I use iphone 4s USB cable to recharge for the new ipad

The iPod, iPad & iPhone cables are identical, however, the chargers are not.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

Parallel port to usb cables

Hi guys,
I just bought a new PC for my parents (Dell Inspiron, Merry Christmas...), and realized only this morning that it doesn't have a parallel port to support their antique laser printer (which still works well).
I did a quick search and found these Parallel Port to USB cables:
http://www.tigerdirect.ca/applications/ … &CatId=471
http://www.thesourcecc.com/estore/Produ … ct=2608263
I prefer the latter because tiger direct charge way too much for shipping and there's a The Source in town here.
Will these work with Linux -- they claim its seamless, but I can imagine cups possibly getting confused if it expects a parallel port and gets USB? Any idea how they work?
Also, the printer is from 1994, will it work with a IEEE-1284 parallel port, or were they using EPP or something else back then?
I could also get a PCI parallel port adaptor, but you've probably heard my horror stories every time I open a case. ;-)
Thanks for any advice!
Dusty

I was just given an old Canon BJC-1000 printer with a parallel to USB adapter today. Cups does find the printer and will print on it. My only problem so far is that the page is shrunk down to about 1/16 of its original size! It's very funny but not real convenient.
Edit
Never mind that. It works!!! Readjusted everything in the CUPS config, restarted my application, and all is well.
Last edited by skottish (2007-12-26 01:49:54)

TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

HELLO TO ALL
ABIGMAC1 HERE! GOOD DAY TO ALL
JUST WONDERING IF ANYONE COULD ANSWER THIS
CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
I CAN USE AN AUX 3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
THANK-YOU
ABIGMAC1

Check the documentation for the car audio system for device compatibility. A shuffle may not be compatible.
If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect your shuffle's headphones jack to the car audio system. You can then use your shuffle to play through the car audio system.

Will the iPad Mini print to / scan from the HP 7280; with USB cable?

Will the iPad Mini print to / scan from the HP 7280; with USB CABLE?
Thanks, everyone...
---sue h (Apple novice)
iPad Mini

https://itunes.apple.com/us/app/genius-scan-pdf-scanner/id377672876?mt=8
I use this app. It takes a photo and turns it into a PDF (the photo that you take with your iPad/iPod)

Unable to download using ports with usb cable after ios7 upgrade

Similar Messages

Maybe you are looking for