Unable to dual boot Windows Server 2008 On My new HP laptop

Hello,
I have recently purchased a laptop from HP Site. Here are the specifications of my laptop.
OS : Windows 8.1
HP ENVY 17T
4710HQ PROCESSOR
16GB RAM
I have created a new NTFS Partition and I am trying to install WINDOWS SERVER 2008 from setup file from my hard disk.

Hi:
Yes, the drive controller in your notebook is set to AHCI, not RAID.
Here are the AHCI drivers in the setup information file I posted above...They are in the iaAHCIC file...
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
You need to select the driver that matches the hardware ID for the specific Intel(R) 8 Series Chipset Family SATA AHCI Controller your model has.
It either has the 8C03 controller or the 9C03 controller.
You can find the hardware ID for the specific controller your notebook has by clicking on the Intel(R) 8 Series Chipset Family SATA AHCI Controller.
The click on the Details tab at the top of the Intel(R) 8 Series Chipset Family SATA AHCI Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the third item (Hardware ID's). Now you should see the ID device string.

Similar Messages

Dual boot Windows Server 2008 R2 and RHEL 7 Server?

Do someone know how can I setup dual boot of Windows Server 2008 R2 and RHEL 7 Server?
I've tried to install Windows first, then shrink, then install RHEL there.
But GRUB2 loader doesn't offer to start Windows, only Linux in the menu. (probably Windows partition need to be added to grub2 somehow)

Hi Oleg Vazhnev,
Please refer to following article and check if can help you.
How
to add Vista/Windows 7 partition to Grub 2 (Ubuntu 9.10, Karmic Koala)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, please also refer to following video and check if can provide you more details of installation.
Install RHEL 7 in Legacy Mode (Dual Boot Windows Server
2008 R2)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Dual boot windows server 2008 R2 with windows 8.1 UEFI

Dear all,
i was trying to dual boot in UEFI windows 8.1 and windows server 2008 R2 but every time windows server 2008 R2 separately before installing windows 8.1 was working after this windows 2008 R2 gives me blue screen immediately even if i installed windows 8
first then windows server 2008 but for all case windows server 2008 R2 works with debug mode .
i could not understand the reason

Hi,
What is the STOP error while BSOD occurred? You could try to troubleshoot BSOD with the following method.
How To Fix a Blue Screen of Death
http://pcsupport.about.com/od/fixtheproblem/ht/stoperrors.htm
In addition, have you tried to use Native Boot to make a dual boot? For details, please refer to the following articles.
Understanding Virtual Hard Disks with Native Boot
http://technet.microsoft.com/en-us/library/dd799282(WS.10).aspx
Add a Native-Boot Virtual Hard Disk to the Boot Menu
http://technet.microsoft.com/en-us/library/dd799299(WS.10).aspx
Native Boot To VHD Part I of IV - Overview
http://blogs.technet.com/danstolts/archive/2010/03/29/native-boot-to-vhd-part-i-of-iv-overview.aspx
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

How to install bo xi 3.1 on windows server 2008 r2 sp1 (virtual machine )

HI GUYS --
operating system: I am trying to install Business Objects into a virtual computer which has a windows server 2008 R2 SP1 operating system. I installed version BO XI 3.1 and I also installed Service pack 3 and Service pack 4. I installed liveoffice usual way. Whenever I try to design xcelsius and dashboard, I got some errors. In order to fix these errors, I followed SAP notes step by step. However, It didnt help me at all. I also tried to install by looking at install guide and supported platform documents, but I get an error each time of doing that. I can write each error over here. I also opened a link over here. Check out the link please to see the errors how to display webi docs. in liveoffice?
My main question is this.
Are there anybody who works operating system windows server 2008 R2 SP1 and this installed into the virtual machine? If so, Is it worked by doing which installations exactly?
Note; Business Objects tools work very well (infoview, cmc, web intelligencei and the others work without problems at QAAWS BO XI 3.1, but they have been given cluster error at BO XI 3.1 SP3) . In addition, port server settings have been installed based on the installion guide. If you give me any information other than whatever I said, I appreciate that. I also point out something. If I dont get any message which I attached a sample when I try to operate life office. In this situation I cant see either my documets or web documents in infoview)
[http://imageshack.us/photo/my-images/3/sorunc.jpg/|http://imageshack.us/photo/my-images/3/sorunc.jpg/]

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

How to get clients connected in WMS on windows server 2008 with c# coding

Sorry to bother anyone about this question.
Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
at online when a client connects to WMS that I will get amout of that client also.
I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
Can anyone knows this,please ?
Regards,
BigBerm

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

CF9 install on Windows server 2008 error

I am getting the following error message when attempting to run the installer for CF9:
Microsoft VC++ 2008 Runtime
Installer has determined that Microsoft Visual C++ 2008
Redistributable Package is not installed. Select OK to install now.
To perform your own installation, select CANCEL. After installation
restart the installer to continue.
this is Windows Server 2008 R2 brand new.
Then I installed the :
The Microsoft Visual C++ 2008 Redistributable Package (x86) installs runtime components of Visual C++ Libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008 installed
vcredist_x86.exe
http://www.microsoft.com/downloads/fr-fr/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074 B9F2BC1BF&displaylang=fr
Restart the server, Reinstall CF9, same message.
I do not dare to contiune without help and certitude it will run correctly.
Please Help ,
I just bought it from the store
I even do not know how to contact Adobe, I am in France.
Pierre.

Well, I answer myself,
It needs to install the Visual C++runtime 64bits (not 32bits)
vcredist_x64.exe
Then, I still have the message, but we just have to say OK, and it will install
coorectly with Visual C++ runtime too.
Problem solved.
Pierre.

Windows server 2008 R2 is unable to boot.

Hi There,
Please advice for Windows server 2008 R2. It was unable to boot up to Windows.
It ask me to do the recovery which is not able to do.
I tried to repair the Windows but it says no problem found.
I also tried from below link.
http://social.technet.microsoft.com/wiki/contents/articles/4162.windows-server-2008-repair-steps-for-no-boot-issues.aspx
Please help.

Hi,
What happend prior to the error? New update, new application, new role, hardware failure?
And what is the error message? You can't even boot in safe mode? (hit f8 during boot)
best regards
jesper vindum, denmark

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to install Directory Sync tool in windows server 2008 R2 Eneterprise

Hi,
I am unable to install Directory Sync in windows server 2008 R2 Eneterprise.i have joined my machine domain joined computer running Windows Server 2008 r2 enterprise,when i click dirsync.exe then gives below Error.
The Windows Azure Active Directory Sync tool must be installed on a domain joined computer running Windows Server 2008 Service Pack 2 or later,or Windows Server 2008 r2 Service Pack 1 or later
Please help on this why this happing when i try to installed DirSync software.
Regards
Anil Kumar

Hi,
have you already installed .net framwork 3.5 and 4.5.1 on that machine?
http://technet.microsoft.com/en-us/library/jj151831.aspx
Also make sure that you run the install command from an elevated command prompt.
Hope that helps,
Lutz

Unable to mount dfs volume from Windows Server 2008 R2

I am trying to use Finder|Go|Connect to Server to connect to a DFS volume shared by a Windows Server 2008 R2 machine. I get the following errors:
A dialog box that says, "There was a problem connecting to the server "server name". Contact your system administrator for more information"
Messages in the log:
PM kernel: smb_ntstatus_error_to_errno: Couldn't map ntstatus (0xc0000225) to errno returning EIO
PM NetAuthSysAgent: checkForDfsReferral: mounting dfs url failed , syserr = Input/output error
PM NetAuthSysAgent: smb_mount: mount failed to <server name>, syserr = Input/output error
I've seen a reference to this article (https://discussions.apple.com/thread/3258472) to fix similar problems but that seems only to apply to Mac-based servers not Windows servers.
I called AppleCare but they said they are unable to troubleshoot a problem originating on a Windows Server.
The Mac is running 10.7.4 but the problem happens on 10.7.3 as well.
I can connect to non-DFS volumes from other Windows Servers with no issue.

After some more digging around I found out that it works when using the cifs: prefix instead of the smb: prefix in Finder|Go|Connect to Server.
So instead of using the name smb://servername.company.com I use the name cifs://servername.company.com.

Unable to install SAP B1 on Windows server 2008 R2

Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RP

Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP

PT 8.53 Windows Server 2008 R2 Error on booting domain.

Hi all,
We are setting up a test environment for PT 8.53 on Windows Server 2008 R2. Everything in the installation went correctly then we try to boot the domain in PSADMIN for the first time we are getting an error when trying to:
exec BBL -A:
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: WARN: No BBL available on site <server name>.
Will not attempt to boot server processes on that site.
Tuxedo info: Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level 056
Just seeing if anyone else has come accross this or has any ideas we could try.
Thanks.
Edited by: 991229 on Mar 1, 2013 7:15 AM

Interesting, when you did the configure step in psadmin, did BBL start then or does it fail there as well? I've not installed 8.53 yet anywhere, but in my 8.52 env, doing a reconfig will start the BBL to ensure things are shut down. My guess is it fails, which I think would cause your configuration to not occur maybe?
Command to execute (1-10, q) : 4
This option will shutdown the domain.
Do you want to continue? (y/n) [n] :y
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 067Booting admin processes ...
exec BBL -A :
process id=12818 ... Started.
1 process started.
Attaching to active bulletin board.
What if you get all your env variables set, and try to run tmadmin by hand?
set TUXDIR, PATH, PS_MACH, PS_HOME, PS_CFG_HOME, PS_SERVDIR, PS_SERVER_CFG, TUXCONFIG, LD_LIBRARY_PATH, NTSYMBOL_PATH, APPDIR (I think that's all of them, I'd have to look again)
then from cmd prompt run tmadmin
at the tmadmin prompt run boot -y
that would extract psadmin from the process, if that fails to find BBL, then I think you might need to pull out Process Monitor from sysinternals, and trace the tuxedo start process, which will show you what path BBL is really being looked for in, and possible help you solve this. You can also use Process Explorer to review what environment variables are set for what processes (such as psadmin or tmadmin).
Let me know what you find, as I'm interested in knowing what is causing this.

Administrators unable to write to a text file created by another Administrator on Windows Server 2008.

Why are Administrators unable to write to a text file created by another Administrator on Windows Server 2008?
--- The Administrators already have full control so how do I fix this? ---
Example: On a Windows Server 2008 (SP1): user A (who belongs to the Administrators group) logs in and creates a directory C:\foo and creates a file readme.txt in the foo directory. User B (also a member of the Administrators group) logs in and opens C:\foo\readme.txt in notepad. User B types something and tries to save the file. User B cannot save the file…an option to save as some other file name is presented. The security permissions of C:\foo\readme.txt show that Administrators have full control.
Work around 1: Explicitly add user B to have full control over the foo directory. The problem is that all the all other Administrators still need to be added (current and future).
Work around 2: Change the Users security permission to be full control on the foo directory. (this seems dangerous!)
It is interesting to not that this same procedure is not a problem in Windows Vista. (Any insight about the difference?)
Sincerely,
Ian

so there is no way to change this without literally shutting down the UAC?
I have files that I need to modify all the time, and it is very annoying to have to save as to my desktop modify and then copy and paste the file again.
I would also rather not give myself permissions to the entire C:\ Drive even specified Folders or documents, etc......
You can change these settings without bringing down the UAC

1.    Click Start, type gpedit.msc and press Enter.
2.    Expand Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.

3.    Double-click “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” on the right pane.
a.    Choose “Elevate without prompting” and click OK.
b.    Double-Click “User Account Control: Admin Approval Mode for the Built-in Administrator account”, Click Enable, Apply and then OK
c.     Double-Click “User Account Control: Run all users, including administrators, as standard users”,Click Enable, Apply and then OK
Then reboot the Server. You should now have the ability to modify any document, etc....

Windows server 2008 r2 operating system not booting in normal mode after unstalled the virus gaurd

Windows server 2008 r2 operating system is not booting in normal mode after i uninstalled the virus guard in the system. I tried to repair the system but repairing option not available in server 2008. i can log in to the system only safe mode.
Please help me to solve this issue as soon as possible .I do not have the any system backup with me .

Hi,
Regarding the issue here, please restart the computer and press F8 until you see the
advanced boot options, select start windows normally,
if it starts with no problem, please check if you have the option boot from safe mode checked:
run->type msconfig->tab boot->boot options, check if the
safe boot is selected, if yes please uncheck it. Then restart the computer to check if this problem still exists.
If the system needs repair, please take a look into the below WIKI article, and check the event viewer to see if any errors for further troubleshooting.:
Windows Server 2008 Repair Steps for No Boot Issues
http://social.technet.microsoft.com/wiki/contents/articles/4162.windows-server-2008-repair-steps-for-no-boot-issues.aspx
Hope this helps
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Server 2008 R2 Does not boot When Back up drive removed

I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?

Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected]

Unable to dual boot Windows Server 2008 On My new HP laptop

Similar Messages

Maybe you are looking for