Unable to edit certain fields in order type RE comparing with OR

Dear friend,
When I am creating return order with order type 'RE', I find out there are certain fields that are not editable. However, this issue doesnt happen with standard order(order type 'OR'). please refer to the following snapshot:
where you can see fields such as 'intercom', 'payment term' is eidtiable in order type or, but not in RE. Anybody could tell me why? and what configuration control this screen layout? how to edit this? thanks!
Best Regards
T.P

Hi Peng,
do you face this only for you ID/few users or for every user these 2 fields are not editable ? you have to check this by asking your colleagues/users .
If it is problem with few users then they have done some authorization check here only for few users.
if it is for all, then as mentioned by Venugopal, some enhancement is done for this to make non editable these fields.
What to you want, do you want to make it editable fields or do you just want to know why it has done ?
Regards
Sundar

Similar Messages

  • Retain standard SAP order type after copying with user defined order type

    Hello SAP Gurus,
    We have a requirement of retaining the standard SAP order types after copying with User defined order types. But the issue is we don't want to see the standard SAP order type such as PM01, PM02 in production system while using transaction like IW31 etc.
    Is there anybody who has answer to retain these stanadard SAP order types without deleting from system configuration?
    Thanks in advance.
    Cheers,
    Vaibhav

    Vaibhav,
    When you F4 on the order type field in IW31 you will get the popup showing the order type list. At the top of this list is a button with a green "+" sign (Insert in personal list).
    You can use this button to select your favourite list.
    This function is available in most F4 drop-down lists.
    However, you cannot set this setting for all users. You will need to write an ABAP program to do this.
    PeteA

  • Unable to edit birthday field in Address book

    I am unable to edit a card in address book properly. If I try to enter a birthday in the birthday field by either May 2, 1972 or 05/02/1975 no input of any kind sticks. 
    Can anyone tell me why and how to fix this problem?

    There is something really weird going on. 
    If I start a blank test card and I type (all end in return):
    December 1 1973, the field goes blank
    If I type December 1 (return), the field changes to 1 December.  Then, if I put my cursor in, I can go back and add 1973, but not with the orignal December 1.
    I CAN write 1 December 1973, but not December 1 1973.
    This is bizarre.  It worked just fine before Lion. 
    In Canada (which is my chosen country and language on my keyboard when I set up my user) we say Month/Day/Year.  In Quebec I believe they would write 1 December 1973, but in Ontario we would write December 1, 1973.
    This is no longer intuitive and a huge time waster!

  • Unable to edit the fields in PDF interactive form

    Hi,
    We are in the process of developing an interactive form integrating Web Dynpro ABAP with Adobe forms.
    As of now we are able to send the data to Adobe form from Web Dynpro.
    But we are facing the following problem.
    i) Unable to edit the form data for entering/changing the contents of the fields in PDF document,  which is presented to user with a Web Dynpro application URL.
    We have already unset the 'ReadOnly' property of the interactive UI element.
    We are currently working on ZCI installation with SAP SP08, GUI patch level 20, Adobe Reader version 8.0
    Please advise...
    Thanks,
    Satya.

    Hi,
    Check your ADS settings, I feel it's due to lack of some config in ADS only.
    Regards
    <i><b>Raja Sekhar</b></i>

  • How to modify field symbol of type Index Table with other field symbol of type any.

    Hello Experts,
    How is it possible to update an filed symbol table of type Index table with other filed symbol table.
    e.g.
    Field symbol :  <lt_table1> type Index table.
    Field symbol : <lt_table2> type Index table.
    after some code...at run time these table filled like following.
    <lt_tabel1 > has  value fore column  like c11 , c12 , c13 
    <lt_table2> has value for column like C11     , C12 , C13 , C14 , C15 . some extra  values from <lt_table1>
    Now I want to be modify <table1> one entires like C12 with <table2 > col C12.
    how I can achieve this.
    Regards,
    Chetan.

    Hi,
    did you try  ASSIGN COMPONENT xx OF STRUCTURE <IT_TABEL1> TO <IT_TABLE2>.
    xx will contain the number of the column
    or maybe, if you have the description with a field catalog or other, that will be easier ..
    regards
    Fred

  • ME 51N Error msg order type doent match with account assignment.

    Hi,
    When I Execute ME 51N am facing an error ": For order type ZTWA ,Please use account assignment T"
    Here my issue is whenever I press back ,Exit etc its promoting the same error i couldn't go back or exit the transaction.
    One more thing i have enhanced ME51N using BADI  - ZMMEI_PTP15_SERVICE.
    Thanks in advance

    No idea what this application is but it's not Crystal Reports. If it's classic SAP product then post your question in one those forums. If it's a third party application please contact their support for assistance.

  • Unable to edit validated field in table maintance

    Hi all,
    my requirement is to show an warning message on non key field if validation is not correct and edit on the same screen.
    solution: I have created an event new-entry in table maintance and tried to validate that field field (email)
    form new_entry.
       if table-email na '@'.
       message w001(incorrect email id)
      endif.
    enfdform.
    - In this way it show the warning correctly but i am not able to edit that email field on the same screen.
    do i need to validate in chain endchain. If yes how ??
    Can anyone suggest the solution with demo code .
    Thanks,
    Aisha

    Simple set sy-subrc some value after message statement and change message type as 'S' like below.
    FORM new_entry.
      IF table-email NA '@'.
        MESSAGE s001(incorrect email id).  " Message type 'S' to stay in same screen
            sy-subrc = 1.  " Set some value other than zero to abort saving
      ENDIF.
    ENDFORM.                    "new_entry

  • Unable to Edit month field in iCal

    Hello all,
    I'm having a very strange problem with iCal. I can not edit the month field of any event. The field always shows "01" (no mater the month) and when I try to move the cursor to edit it, it jumps over the month field to the year. This happens for all kind of event in all calendars. I have been to an apple store and show their support team the issue but they seems to have never seen anything like that before and asked me to reinstall the OS, which I did but no chance... still the same issue. Has anyone encounter such problem before? Any idea how to handle this? It is very annoying. I'm an over 20 year Microsoft user and shifted few weeks ago to Mac ... very cool but these small things are killing me :-(! Please Help!
    Thank you in advance!
    - a.

    Ok cool, I have changed the time displayed to Military 24H in Time and Date setting ... while keeping my International region to Canada ... and iCAl still seems to be working well! Great!
    Again thank you very much! I have recently transitioned from WIN to MAC and this was making me crazy!
    - a.

  • Unable to edit "calendar" field of events with invitees

    I am having a couple problems with the "calendar" drop-down field on calendar events.
    This is on a 4S, iOS5, syncing calendars with iCloud.
    If I create an event with an "invitee" (or add an invitee to an existing event), I can no longer change the "calendar" field of that event.  In fact, the "calendar" drop-down doesn't even appear on the iPhone calendar app's "Edit" dialog for events that have an invitee.  I can still change it via the web interface at www.icloud.com, and the change is even pushed to the iPhone.  But on the iPhone itself, I cannot find a way to change the "calendar" field on an event that contains one or more "invitees".
    Second, if I receive an "invitation" from someone else, I cannot find a way specify which of my calendars I want the event on when accepting it.  I would expect it to go to the calendar I have defined as "default" in Settings, but it seems instead to go to the last calendar I created.  And after accepting it, I cannot change it because the "Edit" dialog doesn't display the "calendar" field, as mentioned above.  Again, I can change it via the web interface at www.icloud.com, but cannot find a way to change it directly on the iPhone.
    Am I missing some way to edit/change the "calendar" field of an event with invitees?  Or to select which calendar I want events to be on when I "accept" invitations from others?

    I have the same problem.  I recently updated to iOS5 and set up syncing through iCloud. 
    I was able to add one event into my iphone calendar app, but for the next event that I tried to add, there was no longer the option to choose a calendar and when I tried to add it by tapping "Done," an error message came up: "No calendar is set". and there was no way to select a calendar.
    I was able to add the event on my Google Calendar on my laptop (PC), and it synced automatically, but I wasn't able to add any events from the iphone itself because "no calendar is set". 
    I tried turning off and on the phone and syncing back to my laptop, but the problem persisted.
    I deleted the iCloud account on my iphone, and that seemed to fix the problem; I'm able to add events again from the iphone and it's syncing to my Google Calendar.
    I then signed on to iCloud and setup syncing again, but turned off syncing everything except photostream, documents&data, and find my iphone since everything else would sync to outlook or internet explorer, neither of which I use.
    That might have been the problem.  For PC, iCloud will only sync to Outlook and Internet Explorer, and I don't have Outlook setup (can't connect to my work's email server with my account and the IT guys don't know how to fix it or they're too lazy to troubleshoot) and I only use Firefox and Chrome.  Since iCloud isn't syncing to any calendars on Outlook, there aren't any calendars set...
    I just did this a minute ago and everything seems to be back to normal, including the ability to choose a calendar when adding events.
    I'll have to see if it the problem comes back

  • Unable to edit "Note:" field in Address Book

    I have updated to Mac OS X 10.6.4 one week ago (from 10.5.).
    Now for the first, I am trying to edit the "Note:" field of one of my contacts, but I am neither able to add text, nor can I delete text.
    I have 47 lines of text in that Note field and wanted to add a few words, but after typing it, it keeps disappearing after a few seconds. If I delete a few lines of text, they keep reappearing after a few seconds.
    Editing the Note field (which has less lines of text) in another contact first exhibited the same behavior, but now works flawlessly.
    Having the "Edit" button depressed or not, does not make a difference.
    Address Book Help says that this happens when there is not enough disk space, but I have over 41GB left.

    Hello Marcus and others,
    I have experienced the same issues with my Address Book (version 5.0). First things first, let me suggest you complete a back up of your address book:
    1. Go to the File drop down menu
    2. Click on Export
    3. Select *Address Book Archive* from the 2 choices
    4. Choose where you would like to store this back up. Let's just say the Desktop for now.
    5. Disclaimer, any unsaved data will be lost during this reset, so please back up all files you will need.
    6. After you have successfully archived your Address Book, turn off your computer.
    7. Now here's the important part, hold down the power button for at least 6 seconds or until you hear a loud sound or tone. This should reset your settings back to default.
    This is how I just fixed the problem with editing the Notes of my contacts in my Address Book 5.0
    Good luck and I hope this helps someone.
    Nupeologist

  • Table Field missing in ECC6.0 compare with 4.6C

    Hi Gurus
    During copying a Z Report i getting the following error
    ie) the field A906-MATNR not avaialable in the newer version
    I checked the table, that field not avaialble in A906 in ECC6.0
    Which table i can use
    K.Prabakaran

    It is new Implementation ECC6.0 legacy is 4.6C
    No change request were sent
    Please see the comparision of both
    ECC6.0 - A906-Sales org./Distr. Chl/Vendor
    Client
    Application
    Condition type
    Sales Organization
    Distribution Channel
    Vendor Account Number
    Release status
    Validity end date of the condition record
    Validity start date of the condition record
    Processing status for conditions
    Condition record number
    4.6C - A906 - Sales Organisation / Material
    Client
    Application
    Condition type
    Sales organization
    Material number
    Validity end date of the condition record
    Validity start date of the condition record
    Condition record number
    Please check in your systems also
    K.Prabakaran

  • Unable to create/save a Sales Order in ISA R/3 Edition (WAS 6.40)

    I have been trying to place a new order on ISA R/3 Edition in B2B environment. Everything goes ok (put articles within the basket, update prices, calculations, etc), but when I click “To order”, the simulation screen appears with the articles but without the prices and calculations. The following error message appears:
    Error in R/3 system: document cannot be sent. Call our hotline
    I’ve checked the OSS note 700330 and it said that ISA user is trying to send an updated item ship-to party to R/3. In the ISA log-files, we have detected an R/3 error message VPD/003 'Partner function WE is not defined in partner procedure T ()'.
    The solution proposed is to
    1 - Change the partner procedure assignment for the third party items you are working with or
    2 - Disable the fields for changing ship-to parties on item level on the ISA UI or
    3 - Create your own R/3 error message when an item ship-to is entered for third party items and display it on the order change and order simulation screen.
    What I should implement is option 2, but I don’t know where I have to change the ship-to parties on item level on ISA UI, since in XCM there is no place to do so.
    Anybody knows where I can do those changes? Any help will be very much appreciated
    Thanks

    The problem is originated because in shopadmin tab “order”, there are two fields related order type: Order type from SAP R/3 & Order Type (next to delivery block field). The first one is the sales order type that is goanna be generated when a sales order is created. The second field is “purchase order type” related to the way in which the sales document arrives from the customer (Telephone, for example). Both of them must be valid, fist one in Sales order type, transaction VOV6 and second one in program SAPLSVIM
    The problem is that no matter what kind error you have in ISA R/3 Edition, the user will receive the same error message “Error in R/3 system: document cannot be sent. Call our hotline”, so you have to switch the backend logs on to write the real SAP error message

  • Use of field "Open Item management" in Configuration of order types?

    Hi All,
    Can any body explain me the use of BOX for selectind or de-selecting "Open item management" field for order type in "Configuration of order types"?
    I need to understand the use of selecting it and not selecting it?

    it will activate the commitment management for your order type. 
    From SAP help:
    " Commitments are contractual or MRP-relevant obligations that are not entered in accounting but that lead to actual costs as a    result of various business transactions,   for example for purchase orders.
    Commitments Management is used to enter these obligations at an early stage and to analyze their cost- and finance-related results. "
    Hope this helps

  • Unable to edit Document in WEB UI, when the status is Closed.

    Hi,
    I am working on Service Request Transaction in WEB UI. When the status of the document is set to closed, I am unable to edit the fields. Could you please help me why the system is behaving in this way? Any configuration is involved in this?
    Thanks,
    Sandeep

    Some standard system statuses are preconfigured to disalowe certain activities when the system status s set. You can try setting in your status profile for that status the business transaction "Change document" to "Allowed".
    Regards.

  • Purchase order type in sales documents

    Hi All,
    I have come across with a peculiar requirement . Basically we want to have a source from where we have got the order as the order may be from different environments.  Example: EDI Order, Web order, Manual Order.
    So I have decided to use the field 'Purchase Order type' at the sales document header - Purchase order data.
               We can define new purchase order types at (path) SPRO-SD-Sales-Sales document header-Define purchase order type
    My question is how we can do this as automatic for each sales order. Is there any provision to assign the purchase order type to sales document type?
    How can we address this issue?

    Hi,
    try user exit USEREXIT_MOVE_FIELD_TO_VBAK in  MV45AFZZ. Pl take the help of your Abapers for this.
    But then we have this kind requirement where we use the same document type, but goto > header data > purchase order data and select the way in which the orders are coming.
    Hope it helps. Pl reward if useful.
    Thanks & Regards
    Sadhu Kishore

Maybe you are looking for