Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

Greetings, welcome to the Forums.
There's lots of detail you left out...
There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
What screencapture application are you using?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

Animation codec best for screen capture?

HD for Indies links to DV Guru who says that the Animation codec, 16 bit, is best for screen capture. Comment?

It's the most commonly used codec for this... I've used it with success.
Jerry

Timestamp for screen capture

How do I add a timestamp for screen capture?

Have a look at this thread:
https://discussions.apple.com/message/18821098#18821098

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

How to set default file type for screen capture?

I want to change the default from .jpg2 to .jpg when doing a screen selection
capture (cmd-shft-4). Where is the place to do this?
Thank you,
todd

Todd,
OnyX has 10 screen shot options available in Parameters>General>Screen Capture format:
;~)

Highest quality for screen captures?

I need to take screen grabs of various websites that I will later animate in either Flash or Final Cut Pro. What would you recommend to get the highest image quality? Saving the page as a .PDF and bringing into Photoshop for editing or taking a screen grab and bringing into Photoshop?
Thanks.

The largest possible size should be selected to turn off all font smoothing.
Try your screen capture with smoothing on and then off on a couple sample screen images. It really depends on what looks best after you resample the resolution in your final product in FCP or Flash.
You should also preview/test your output if you are working with moving screens and interlaced video in FCP. Your type may start to 'dance'.

Quicktime plugin for screen capture does not work in flash player 11.2

Hello,
I have created a quicktime plugin (it is .component file) for screen sharing purpose.
I have used quicktime framework for that. plugin is detected in flash player.
This plugin is working perfectly for flash player 11 and below.But,
It does not working in latest flash player 11.2.
I have seen following error on console -
Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
Session received the following error while decompressing video:
Error Domain=NSOSStatusErrorDomain Code=-8974
"The operation couldn’t be completed. (OSStatus error -8974.)".
Make sure that the formats of all video outputs are properly configured
Note - Compression format used in plugin is kBMPCodecType.
Please, help me.

The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.

Tab key for screen capture

Hi All,
Cap2 takes a new screen capture when we hit the Tab key. Is
there a way to disable that?
Thanks in advance - Vijay

Hi,
I can see that the norm for most is to take a new screen grab
when hitting Tab; however, on a project that we are workign on, we
are narrating information about a set of fields in an application,
and prefer to ffill them all in on one slide.

Retaining video quality for screen capture export

I've spent hours searching all over the interwebs and trying every combination possible, but I cannot for the life of me get Premiere to maintain the quality of my video from a screen capture. This is for a software demo video I am making. Here are the settings for the video capture:
Recorded with ocam screen recorder (http://ohsoft.net/product_ocam.php). This produced decent quality, not perfect, but definitely readable.
Microsoft MPEG 4 part 3 (.AVI) codec
1024x768
30fps
6000Kbps bitrate
When I view the files in Windows Media Player or Quicktime they look fine (again, not perfect, but definitely usable)
However, when I import them into Premiere Pro the preview adds artifacts, especially around black text on white background.
My sequence settings in Premiere match the original video:
1024x768
Square pixels aspect ratio
30fps
Exporting produces the same problem, artifacts all over.
Oddly, sometimes the artifacts disappear, such as when a window is moved with the cursor. Suddenly all the text in that window gets clear for a second.
Any help would be greatly appreciated.

Over in the PrElements forum, Steve Grisetti (may be spelled wrong) who literally wrote the book http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/ has said that he uses Camtasia for all of the online tutorials he creates
You might try that... some Camtasia discussions, with things to avoid and help
Camtasia http://forums.adobe.com/thread/836800
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148
Techsmith codec http://forums.adobe.com/message/3692768
-and http://forums.adobe.com/thread/1046914?tstart=0

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Default values for Screen Fileds

Hi All
By default, if a user doesnt give a value for a particular field, it will have the Default Value of the particular type.But i want it to retain a Null Value in such case. Is it possible.
I have a numeric field in my screen. I need ot trigger a error message if the user doesnt enter any value..
And to accept if ihe enters 0.
BUt even if the user doesnt give any value, the screen field gets 0.
Is there any way to do this

You might want to check out using the "on request" on some modules in the screen flow to determine if the user has keyed something in... from [Conditional Module Calls|http://help.sap.com/saphelp_46c/helpdata/EN/9f/dbabbd35c111d1829f0000e829fbfe/content.htm] :
ON REQUEST
The module <mod> is only called if the user has entered something in the field. This includes cases when the user overwrites an existing value with the same value, or explicitly enters the initial value.
Jonathan

Default settings for screen

Hello Forum I have just re calibrated my screen ( with Spyder) and an at a lost to remember what the factory default setting is for the Brightness slider. Just think I may have re set it by mistake and my new calibration is not corrrect. On a steep ( very ) learning curve with all this, so any help is appreciated. Regards Tony
powerbook 15 Mac OS X (10.4.3)

Hello Forum I have just re calibrated my screen (
with Spyder) and an at a lost to remember what the
factory default setting is for the Brightness slider.
Just think I may have re set it by mistake and my new
calibration is not corrrect. On a steep ( very )
learning curve with all this, so any help is
appreciated. Regards Tony
powerbook 15 Mac OS X (10.4.3)
Hello Forum , just to clarify what information I need. At what position is the slider for Brightness set in the System Preferences/Display ? Is it set to maximum brightness or in the middle? Any help from any one who has not changed the setting and using as the factory default would be helpful. I have read so many questions/answers on the forums re calibration but not one gives a clear answer to where the slider is set for default. My resaons for needinng this informmation is Spyder Monitor Calibrator asks to 'Set the Brightness to Default' I am lost as to where it was when I started out setting up. Thanks for looking. Tony

Unable to edit Default Domain policy on Server 2012 R2 domain controller

Hello,
I recently built a Server 2012 R2 domain controller and added it to my domain. When trying to edit the default domain policy I get the following error:
I can make edits to other GPO objects. All the other domain controllers are Server 2008 and are able to edit that GPO. The issue is on the Server 2012 box only. I've checked the delegated permissions, I'm a domain admin, and have opened
GPMC as administrator. Does anyone know what I'm missing? Thank you for your time.
Tino

Hi Tino,
>>Could that be the problem?
I don't think so, for we can still use FRS to replicate Sysvol. However, it is recommended that we use DFSR to replicate Sysvol if our domain
function level is Windows Server 2008 or above.
Besides, we can follow the suggestions from the following thread to check out which replication mechanism we are using.
DFS-R on 2008 R2 by default?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8f2042d3-193d-4414-b9da-cbcedc6a4c32/dfsr-on-2008-r2-by-default?forum=winserverDS
If the Sysvol is replicated by FRS mechanism, as I suggested in the last reply, we can do a non-authoritative restore for the Sysvol on the new Windows
Server 2012. This will restore the Sysvol from a healthy DC.
To perform a nonauthoritative restore, stop the FRS service, configure the BurFlags registry key, and then restart the FRS service. To do so:
1. Click Start, and then click Run.
2. In the Open box, type cmd and then press ENTER.
3. In the Command box, type net stop ntfrs.
4. Click Start, and then click Run.
5. In the Open box, type regedit and then press ENTER.
6. Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
7. In the right pane, double-click BurFlags.
8. In the Edit DWORD Value dialog box, type D2 and then click OK.
9. Quit Registry Editor, and then switch to the Command box.
10. In the Command box, type net start ntfrs.
11. Quit the Command box.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Hope it helps.
Best regards,
Frank Shen

Using Premiere for screen captures

Hi Gang-
Would love to use Premiere to simply capture my screen actions along with my narrated audio so that I can take advantage of the speech-to-text functionality for print and search capabilities. Does anyone know if this is possible? Is there a way to tell Premiere to use my screen as the recording device? I've used SnapZPro X and Captivate on Mac and Windows respectively, but it's that speech-to-text functionality that I'd love to take advantage of in Premiere. Any ideas?
Thanks in advance,
Rich

Paul-
Thanks for your reply. Yes, I saw that camtasia software, and while it looks impressive I really need something that has the speech-to-text capabilities. I have MacDictate (Dragon) but the Premiere CS4 has speech to text that actually syncs up to the timeline of the sequence. So if I search on "bulldog" and I have one occurrence of it somewhere in the middle of my sequence than I could take the user right to that point in the move. Catch my drift? I'd hate to have to film my screen from my camera but I may end up doing that in this case.... maybe someone else will come up with something clever. If I get a stroke of genius (very unlikely at this late hour) I'll be sure to post. Thanks again for your input.
Rich

Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

Similar Messages

Maybe you are looking for