Unable to edit documents after AVG installation

I have a dual drive Toshiba laptop, which has been recntly updated from Vista to Windows 7. Windows 7 has taken up most of my C drive, so I have had to put programs onto the other data E drive. The other day I bought AVG ant-virus 2011 and put it onto my computer (data e drive). Since then, even after taking avg off, I am unable to edit documents on office Word or OpenOffice. it seems to be doing it to my external drive (that I have added) as well as now. Its strange since this only started as soon as i used AVG. Any suggestions what the problem could be? How it can be resolved.
I really need some help, as my computer seems to be slowly dying! Tried to get in contact with AVG but they seem just to be ignoring the problem at the moment.
Thanks for any help,

Hi buddy,
> Its strange since this only started as soon as i used AVG.
In this case I would contact AVG directly if they can say something about this or if its a known issue. I never heard about this but AVG should know what to do now.
I dont know what notebook you have but Im pretty sure its a software issue and it seems to be related to AVG

Similar Messages

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to edit documents in InDesign CS4

Hello,
A work colleague has recently changed their laptop and installed CS4 - since the getting new computer he has been unable to edit documents (which are fine on my machine). He can select objects and reposition on the screen, but can't edit/delete. He can place the cursor and type new text, but can't edit existing text and is unable to move the cursor with the cursor keys.
The objects are not on the master page or locked.
Our Corporate IT has recently revoked all admin access to our own machines - could this affect InDesign? (No-one else seems to be effected)
We have tried uninstalling/reinstalling and deleting the prefs, but to to avail.
Any ideas?
Thanks!

Hi Peter,
Thanks for the reply.
My colleague had CS4 installed on his previous machine and had been using it without problem for over a year - its only since receiving his new laptop that the issues have started.
Unfortunately, I don't think setting up a new user account is really an option (it requires assistance from our parent company's IT dept.).
Yes, we did follow the instructions in the link when replacing the prefs files.
Regards,
James

Unable to edit documents in Sharepoint 2013

Hi,
unable to edit documents in SP2013.while editing getting the following error.Please guide me on this.
Thanks In advance

Hi,
According to your post, my understanding is that only
one user could not edit documents in SP2013 with OWA.
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the
IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome, Internet Explorer 10.
Check whether the user has permission to the documents.
Here is a link you can use as a reference:
http://blogs.architectingconnectedsystems.com/blogs/cjg/archive/2012/07/26/Getting-Office-Web-Apps-2013-and-SharePoint-2013-Working-_2D00_-fixing_3A00_-Sorry_2C00_-you-don_2700_t-have-a-license-to-edit-documents-with-Word-Web-App.-Please-get-in-touch-with-your-helpdesk_2E00_.aspx
If the issue still exists, please feel free to let me know.
Best Regards,
Lisa Chen

Unable to run cs6 after download & installation xp

I am unable to execute the program after installing Help?

I downloaded cs6 to external hard drive and tried to install but wouldnt
work. Will try to download to my laptop tonight directly to the hard
drive and see if that works.
Dave 7042327283
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: Unable to run cs6 after download & installation xp"
To view the discussion, visit:
http://forums.adobe.com/message/4633076#4633076Thanks for replying,

User unable to edit document in protected mode until 'enable all features' is selected everytime.

In light of the most recent vulnerabilities identified in version 10.1.1 and the instructions in - http://www.adobe.com/support/security/advisories/apsa11-04.html
to use protected mode, I have informed my customers how that should be performed. However, I have at least one user that is unable to edit their document until they select the ' enable all features' function. Even after they do that, and the specific file is listed in the in the security (enhanced) > priviledged locations list, the user is required to select 'enable all features' every time for this file.
Can someone tell me a solution?

>Where are you seeing the "enable all features function"?
The notification bar at the top of the document

Unable to edit document from SharePoint 2007 using Office 2013 and IE 11

I am getting the following error when I try to edit a document from SharePoint 2007: "Edit document
requires a Windows Sharepoint services-compatible application and Microsoft Internet Explorer 6.0 or greater". I am using Windows 7 with Office 2013 and Internet Explorer 11. Troubleshooting steps that I've tried so far (that haven't worked) are as follows:
1) repaired Office; 2) switched from 64 bit version of IE to 32 bit version; 3) moved the owssupp.dll from C:\Program Files (x86)\Microsoft Office\Office14\ to C:\Program Files (x86)\Microsoft Office\Office15; 4) tried removing old versions of Office (but
I still need to use Office Communicator 2007 r2 and couldn't figure out how to get rid of the Office14 files from Program Files); and 5) running SharePoint in IE compatibility mode. Please advise...thanks!

Hi,
It seems you installed mixed version Office2007/2010/2013 on your client machine?
I would suggest you remove all Office 2007 and 2010 version, and reinstall Office 2013(include Office Tools->Microsoft SharePoint Foundation Support component) on your machine, and make sure "Open SharePointDocuments class" add-on is enabled
from IE11, then check if it could fix the issue.
If above works, please test again after installing the Office Communicator 2007 r2 on your machine.
http://social.microsoft.com/Forums/en-US/3e8c0976-2794-49a2-92fe-6a254b3cc4ca/a-microsoft-sharepoint-foundation-compatible-application-could-not-be-found?forum=projserv2010setup
http://blogs.technet.com/b/emeaoffice/archive/2013/04/29/you-get-an-error-message-when-you-open-an-office-file-from-sharepoint-on-a-computer-on-which-you-installed-more-than-one-version-of-office.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Unable to edit Document in WEB UI, when the status is Closed.

Hi,
I am working on Service Request Transaction in WEB UI. When the status of the document is set to closed, I am unable to edit the fields. Could you please help me why the system is behaving in this way? Any configuration is involved in this?
Thanks,
Sandeep

Some standard system statuses are preconfigured to disalowe certain activities when the system status s set. You can try setting in your status profile for that status the business transaction "Change document" to "Allowed".
Regards.

Unable to open documents after scanning

I am unable to open my documents after scanning. I keep getting the message Adobe reader could not open because it is either not a supported file type or because the file is damaged, then it redirects me to a buya subcription Adobe reader XI. These documents are just regular standard 3 to 11 gray scale scans, nothing special. I just need my regulay Adobe reader to open A PDF file. Please help.

just to clarify, you're scanning a document and then you are saving that as a pdf file, correct?
in particular, you are not trying to add the scanned document to an already existing file (pdf or otherwise), correct?
if yes and yes and your reader and can that pdf ok, you have a scanner problem. try updating your scanner's drivers.

Editing documents after they are signed

I would like for users to still be able to edit a document after it has been signed. I know that this is an uncommon request but I have a specific need for this functionality. It seems that protection is automatically added to documents when they are signed and then they are not editable.

Hello and thank you for your reply. When I export, this is what I have used:
File Settings:
Image Format: JPEG
Color Space: sRGB
Quality : 80-100
I have not checked the box for "output sharpening", although I did minor sharpening as part of my edit process in LR.
For Image Sizing, I have not changed anything. This is what is currently selected: "resize to fit" box is checked and "long edge" is selected, 500 pixels. Resolution 72 pixels per inch. The "don't enlarge" button is NOT checked.
I'm hoping this is where my issue resides!!
Thank you!

Cant print document after lion installation with my fuji xerox printer

i cant print after lion installation with my fuji xerox c1110b printer, even after i remove and reinstall the driver.
in the print window under status indicate error,
for other program even the print button is not working, need help
thanks

As a temporary fix until the new driver, you can still use Generic PCL Laser printer selection to print black and white on Fuji Xerox C1110B. When adding the new driver, select Options & Supplies. When the new window rolss down, click on the middle Driver button. Then select Generic PCL Printer, and OK.
Maybe there is another substitute driver we can use to print in color as well until Fuji Xerox gets its act together?

Unable to edit Document Set metadata.

I have a Library with Document Sets enabled. The metadata for the documents and the DS are defined and the columns visible (set to optional) from within each content type under library settings. However, when I select a DS and then click Edit
Properties, I can only change the DS Name and the Content Type (DS or Folder). None of the other metadata from the DS content type is visible. The extra metadata shows when I create a new DS item, but there is no way to change it after the fact.
Anyone have any ideas?

It is possible to make it do that but i can't imagine how it could happen without sigificant deliberate effort.
It is possible to modify the columns on a content type so that they do not appear on specific views (view,new,edit) but it's a fairly obscure trick and you need PowerShell to do it. If this has happened then you could use PowerShell to correct the settings
but i dislike treating the symptoms of a problem unless you know the cause.
There are some columns that are set by default to only appear on set views but that would normally affect the items as well as the document sets.
For a random thought you could look at the effectts of seting the columns to be shared throught the document set, it's possible that i've forgotten a bit of default behaviour and that the columns are being hidden on purpose. Other than that i'm out of ideas
i'm afraid. Hopefully someone else may be able to contribute.

Unable to edit document template in SharePoint 2013

We have uploaded a set of templates that users can select from the drop down list in the Document field in the Document Library. We now need to edit one of these document templates.
We follow the procedure and make the edits which changes the template but when we then select that template from the drop down list, the edits have not been actioned.
Can anyone please assist?

Hi,
As I understand, The modification was not saved back to the template.
How do you edit the document template?
Check if the URL of the template is right. You can go to the site setting->site content type->click the content type you want to edit->advanced setting->edit the template->open the template, and click file->to check if the URL under the template is right.
As a workaround, when you edit the template you can save the template in the local computer, and you can upload the template you have saved in the advanced setting for the content type.
The article below is about how to create Document Templates for Document Libraries in SharePoint 2010, it also can work in SharePoint 2013.
http://blog.henryong.com/2007/02/12/how-to-create-document-templates-for-document-libraries/
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Inability to edit document after conversion to Word

I am using AdobeExportPDF for the first time. I just converted a three-page PDF document to Word. In the new Word document, all of the words have run together. I tried to separate them manually, but half the time am not able to do that -- hitting the "enter" key has no effect. Can anyone tell me if there is a fix for this problem?

Try choosing Edit > Select All, then change the font used in the document to something else. I've seen this happen from time to time with documents that didn't have the fonts correctly embedded (or subsetted) within the PDF you started from.

Why am I unable to edit documents converted from PDFs using acrobat?

I Purchased the acrobat for converting PDFs for ease of editing. I have failed to edit the converted documents and the document is substantially corrupted on conversion. Help!

Hey arn051,
How are you trying to convert documents from PDFs and in which format?
Please tell me which Acrobat version are you using?
Is there any specific message that arrives when you try edit the doc?
Regards,
Anubha

Unable to edit documents after AVG installation

Similar Messages

Maybe you are looking for