Unable to edit Dreamweaver tamplate applied Page.

Hi,
I was creating site in dreamweaver using templates and !st I
created a
template by desgining the page, then I saved that page and
one more template
page using save as command. Unfortunately there was design
problem in my
initial template which I don't like and I deleted it. Now I'm
having the
second page only.
Now the problem is that dreamweaver doesn't allow me to edit
the non
editable regions on the second page which I'm having, because
its regions
are locked. But I want to edit on that page so that the same
template can be
applied throughout the page.
So I will Highly appriciate if anybody who had already solved
this kind of
problem and can solve the problem as a hobby and wants to
share the
knowledge.
Best of luck
Anand
www.apbdesign.net.in

visit www.scrds.com/index.htm
Please download it and try to edit all the regions.
I like the mak it as a normal page and try to edit it and
make a new
template.
thanks & Best regards,
Anand
"Murray *ACE*" <[email protected]> wrote
in message
news:e3vl2b$cd7$[email protected]..
> Show me this page, please.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Anand" <[email protected]> wrote in message
> news:e3vl02$caa$[email protected]..
> > Hi,
> >
> > I was creating site in dreamweaver using templates
and !st I created a
> > template by desgining the page, then I saved that
page and one more
> > template
> > page using save as command. Unfortunately there was
design problem in my
> > initial template which I don't like and I deleted
it. Now I'm having the
> > second page only.
> >
> > Now the problem is that dreamweaver doesn't allow
me to edit the non
> > editable regions on the second page which I'm
having, because its
regions
> > are locked. But I want to edit on that page so that
the same template
can
> > be
> > applied throughout the page.
> >
> > So I will Highly appriciate if anybody who had
already solved this kind
> > of
> > problem and can solve the problem as a hobby and
wants to share the
> > knowledge.
> >
> > Best of luck
> >
> > Anand
> > www.apbdesign.net.in
> >
> >
>
>

Similar Messages

Unable to edit one of the pages in Dreamweaver CC

I am trying to edit one of the pages of a club website thru Dreamweaver CC. I can edit other pages in the website, just not the Calendar. It shows the Logo at the top of the page and the Links on the left side of the page, but the remainder of the page is black with a line of code across the middle. If I click to Live View, it shows up fine, but I can't figure out how to edit the page.

Hello,
in this context I want to propose that you validate your Website. Herefore you can use DW itself, see
http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7ba2a .html#WSc78c5058ca073340dcda9110b1f693f21-7b9fa
see "Validate documents using W3C validator (CS5.5)" and there "2.Select File > Validate > Validate Current Document (W3C)."
or you can use the validators directly:
http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.ksahs.com%2F&profile=css 3&usermedium=all&warning=1&vextwarning=&lang=en
and: http://validator.w3.org/check?uri=http%3A%2F%2Fwww.ksahs.com%2F&charset=%28detect+automati cally%29&doctype=Inline&group=0
Hans-Günter

T&E-Unable to edit/print expense report - Page not found or is unavailable

Hello Gurus!!
We have some of the users reporting that they are unable to edit/print the expense report. When they try to do that they are getting the error message "page not found or is unavailable". We verified that the URL for the PCD page parameter is being maintained correctly in the Homepage Area framework.
Could anybody please suggest what else could be wrong?
Thanks
~~MK

Missing pemissions

Unable to edit resource on appadmin page

Trying to add some skills to one of my agents, but I am receiving this error
Config Changes are not allowed during 'Backup' operation, which was started by 'administrator' at 'Tue Feb 19 02:22:14 MST 2008 '. Please try again after 'Backup' is complete.
I tried to cancel the job within bars, but it said it didn't have one running.
Also received this error in the event viewer around the time that the backup started.
The description for Event ID ( 1 ) in Source ( Cisco BARS Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: [Scheduler_Timer at checkTime = 2:00:00 AM] Scheduled backup failed with status: Failure
IPCC 4.0.4sr1 build 40

I got the same error message (but not the same event log error). Running UCCX 7.something. Rebooting the server didn't work and I didn't see a BARS service anywhere.. My workaround was to run a manual backup. It looks like the server UCCX was backing up to crashed. I don't know if it crashed during or before the backup, but regardless the problem is fixed.

Unable to edit page source in CS3

For some reason I am unable to edit page source in an
external application in CS3. I can't figure out why I used to be
able to, and now i can't. please advise

If you want to open the source code in an editor of your choice you can change two hidden settings.
Type '''about:config''' into the location bar. Accept the warning message that pops up, this brings up a lot of settings. You then need to change 2 of the settings that appear, for details on the 2 settings see [http://kb.mozillazine.org/View_source.editor.external view_source.editor.external] and [http://kb.mozillazine.org/View_source.editor.path View_source.editor.path]
You can also change those 2 settings by using an add-on such as [https://addons.mozilla.org/en-US/firefox/addon/394/ Dafizilla ViewSourceWith]

I am unable to edit information I have typed into a spacebar, this includes backspace, and when I highlight it, even after reloading the page

I recently upgraded to Firefox 4 on my 3 yr old Macbook, though I am unsure if this is in fact connected. Now I am often unable to edit information I have typed into a search bar or text box (such as this one) even after reloading that page or pressing first the back, then the forward buttons. Has anyone else run into this, and does anyone know what is going on?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Dreamweaver CS6 edits to old Front Page site display in preview browser but NOT on live server site.

Howdy Folks,
My Dreamweaver CS6 edits to old Front Page site changes display in preview browser OK …But will NOT display on live server site.
To anyone who can step up to the microphone and speak “solution” I will be much grateful?
Bob MacDonald / VIPpromotions

Are you sure you are uploading the pages to the correct location?
Could you post a screen capture of your expanded files window, showing the remote server and local file structures?
I'm guessing they're not identical and that you may be uploading to a redundant root folder.

Unable to edit pages

I am unable to edit pages that another administrator
currently has on her PC. How can I override this or how do I get
the other
administrator to take off the page I want to edit?

If you are seeing this warning "you cant edit this page now
because ..... editing on another computer. Click here to make this
page editable"
then just click on "here"
please let me know if this is not the issue. and if it isn't,
please provide the error/warning you are getting.

Please advise how I can register my Photoshop Starter Edition when I apply I do not receive an unlock code so I am unable to continue to use the program and all my photos are locked in, please advise, thanks John

Please advise how I can register my Photoshop Starter Edition when I apply I do not receive an unlock code so I am unable to continue to use the program and all my photos are locked in, please advise, thanks John

Please refer to the appropriate Forum, this one is dedicated to Photoshop proper.
Photoshop Album Starter Edition

All of a sudden when I click on a Google calendar item I get a blank page and am unable to edit the item.

This same problem was asked months ago ( https://support.mozilla.org/en-US/questions/976863#answer-564132) and it has NOT been resolved! In revolves about Google Calendar.
I'm having this problem since the 29.0 upgrade that FireFox just rolled out (I'm on Windows 8). Really honks me off, too!
When I try to edit an event, the page never renders and is blank. It works in Chrome, but I hate Chrome and don't wish to give up FireFox, unless nobody bothers to address this problem!
Steps I've taken (that didn't work):
Turned off extensions and restarted browser
Cleared cache and cookies, then restarted browser
Changed FF connection settings per instructions
PLEASE solve this problem instead of ignoring!

<sub>Linked from https://support.mozilla.org/en-US/questions/976863</sub>
Hi Anita,
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why would I be unable to edit any page elements?

During some problems upgrading to the latest version, I built a single web page, but now nothing on the page can be selected or edited. All the pages I created earlier can be edited. Is there a way to address this issue, or should I just try to recreate the page?
I'm using this configuration on Mac 10.6.8:
Public Beta 7.01
v0.8, Build 841, CL766429
Air Runtime 3.2.0.2070

That explains why you can't edit it. You can only edit master page content in that master page, never on any of the local pages. The real issue then is why is your master page gray and undeitable? At this point I would guess it would be easier and less time consuming for you to just re-create it. That said, we'd still like to take a look at your file and try to figgure out if this is a corruption caused by the updating problems you were having or a bug that needs attention.
We'll be able to take a look at the issue if you send your .muse file and a link to this topic to [email protected] If your file is larger than 20MB use a filesharing service like SendThisFile or Adobe SendNow.

Unable to edit

I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?

If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>>

Unable to edit html file

Hi,
I downloaded an html file from our server to edit the logo. However, I am unable to edit the logo part. It's like commented out. And once I opened the file on Dreamweaver CS5, I am getting this pop-up message:
"This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again."
I can't edit the html file and change the logo. Please help.
Thank you and God bless!
Dannie

Dannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty

Unable to edit header regions of template

I have just recently taken over the whole editing etc, publishiing , admin of some websties. i have purchased contribute CS5. I was previously using Contrbute 4, which allowed me to edit the whole of the pages'header, body etc..' however, whereas the consultant adminsitrator allowed me to edit the header regions, I now do not seem to be able to do this in CS5. Is it because the administrator has done something to stop me or am I missing some vital bit of info. I can edit the content. The old administrator is acting as if I never could do this and says I need to use Dreamweaver, which I dont have and didnt need it before, I have open the index page in dreamweaver and I still find that I am unable to edit the header and it appears to be try to access an included file, it is trying to access Templates/base.dwt trouble is this does not exist among the files, any idea's why this might be so or is there some trick to editing the headers now that I am missing, cheers in addvance
dustin

Hi Dustin,
You can edit the existing template in the Dreamweaver as for you requirement, by creating connection to that site in Dreamweaver.
While saving the template, Dreamweaver will prompt you, asking for updating the pages using this template. You can update all the pages using that template. So then changes you did in the template will be reflected in those pages.
For example, if you place the Header part in Editable region and save the changes and update in all the pages, then when you edit those pages, the header part will be editable.
Hope this helps you.

Unable to bind portlet parameter with page parameter in webcenter portal

Hi All,
I am trying to bind portlet parameter with the page parameter so that I can ahieve some business requirements.
Here is what I did,
In my Portlet producer application:
1) Created standards based portlet (jsr 286) with view.jspx and edit.jspx with rest of the things being default.
2) In my portlet.xml created two parameters and assigned these parameters to the portlet created above.
3) In the view.jspx added couple of output label adf components in the page.
4) deployed this to integrated weblogic server.
In my WC portal application:
Created a new page and added the portlet to this page( WSRP connection already exists).
deployed portal application on integrated server.
In the edit mode of the page I added one page parameter(Param1) and some default (constant) value added.
What I want is this:
when Param1 value is One display first output label and
when Param1 value is Two display second output label.
I am using jdev 11.1.1.5.0 with integrated weblogic server.

There is no need to use page parameters for this.
You also have two types of parameters depending on what you want...
1) Preferences: these parameters can be used on a user based level. This means that users can personalize the portlets. When a user change the value of a preference, it is only applied for that specific user
2) Public parameters: these parameters are used to customize the portlet. The value you set in these parameter apply for all users.
I have made a simple example to show these two differences: http://www.yonaweb.be/PortletTest.zip
The portlet has 4 inputText on it. The first two can be set by specifying One or Two into the preference.
The other 2 inputText uses the value of the public parameter.
You should only deploy the portlet and consume it in a webcenter application. In the webcenter application, you don't need to do anything special. All is done in the portlet.
I am guessing you don't have written the code that will get the value of the parameter:
in case of a preference you will get the value by following code:
   PortletRequest request = (PortletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest();
   PortletPreferences preferences = request.getPreferences();
   return preferences.getValue("outputparam", "One");In case of a public parameter (for customization instead of personalization) you use following code to retreive the value of a public parameter:
PortletRequest req = (PortletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest();
String param = (String)req.getParameter("PublicParam");
if(param == null)
      return "Three";
return param;This code can also be found in the sample portlet application.

Unable to edit Dreamweaver tamplate applied Page.

Similar Messages

Maybe you are looking for