Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Similar Messages

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Nokia XL speed dial settings: no possibility to se...

If I set a number on the speed dial settings it is obvious that I will call the contact always using a specific sim.
why not have the possibility to set the sim to use.

Hi, navio1973. This can be done. You can select which SIM card to use whenever you call or send text messages. To enable this, go to Settings > Phone > Dual SIM > Calls and messages > Always ask. If you prefer to use your SIM 2, you can also set it by selecting SIM 2. Hope this helps.

Skype to go speed dial order.

How do I change the order of my speed dial numbers? Also, when I call Skype to go and go to speed dial it does not give me a speed dial for number 2 and numbers 10 through 15 on my speed dial list. How do I get these added? Thank-you.

Hello,
Speed dials are only created for contacts 1-9 so you would have to change the order of the contacts within 1-9 to change the speed dial positions
We're not sure why you aren't getting a speed dial for contact 2.
Try changing the order as above to see if that helps. Thanks.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

6230i - Unable to edit voice mailbox number

I am unable to edit my voice mailbox number, the operation is "Not Allowed" has stated by my phone.
I have resorted to adding the voice mailbox number to my phonebook and assigning it another speed dial number.
Any suggestions for unlocking the correct feature?

I have this problem too. I've just changed my contract to a new operator. They tried to send a service message to update the mailbox number but this failed. I am also unable to manually enter the number as with the user above.
I spoke to Nokia yesterday and they advised me to visit a Nokia Care Provider (carphone warehouse) to update the firmware. I've done a search or two and it seems this is a known issue with v3.70 firmware, which I have had on my phone since I bought it about 3 years ago.
So I went to Carphone Warehouse today and they said they would charge me £44 for the privilege of updating the firmware of the phone. That's got to be wrong. To my way of thinking, either Nokia or the Carphone Warehouse (who sold me the unit initially) should take responsibility for ensuring the goods they sell are in proper working order. So how can I get my firmware updated?

HT1349 How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

I found a post from Alope that told me exactly how to fix it.
Go to:
Settings - General - Restrictions - put your pass code in - Facetime - turn the switch to ON
Worked perfectly to stop the message that said, Not authorized to do that!

Nokia E61/Speed Dial - Invalid number error

I have synchronized with my outlook to pull my contacts into the phone. I can dial out of the contacts just fine but when I try to assign one to a speed dial button I get an "invalid number" error. If I create a new contact, it works when I assign it but not when I used one pulled in from my Outlook contacts. Any ideas?

I just noticed something similar to this problem on my E65.
If I assign a number to my SpeedDial (eg. +61-3-9999-9999) it will work if I use the hard key button to invoke the speed dial.
But if I start the Speed Dial application and use that interface on the GUI to call the interface the E65 complains "Invalid Phone Number".
It is strange the the hard-key speed-dial will work, yet the application interface doesn't.
Any suggestions?

SPEED DIALS = unable to find specified object

Hi All,
Glad to join this lovely forum.
I'm facing this message when trying to use speed dials !!
System
unable to find specified object
Any hints ?
Thanks in advance
Model: 9300i

Hi,
Try to update the firmware version (contact ur nearest Nokia Service Center). Please take a full backup before doing upgrade. After firmware update please restore only the contacts (partial restoring recommended). If u do a full restore the probelm (error) may occure again.
BR,
sanju

Unable to edit the tracks number

Having updated iTunes 12.01 with Yosemite 10.10.2 I'm unable to edit the tracks number, as I used to do, select a song then get info and edit whatever I want, everything looks fine except the possibility to edit the track number. Any thought?

You can still edit the track number ... it just involves a scrolling action with the new iTunes.
Go to the song's "Get Info" as you used to do. Once you open the "Details" tab, scroll down to reveal the track number which you can edit.

Two things came with my Firefox when I downloaded it. Speed Dial and Xmarks. When I start the program it locks up and I have to just shut it down. How can I delete them? I only want the Firefox.

When I downloaded Firefox I had two things download with it. Speed Dial and Xmarks. I don't know about either and don't want them. I cannot delete them alone it seems. When it all loads it locks my computer up totally. I cannot x out of anything. Just kind of "thunks" with a dead sound. My facebook applications runs better on Firefox but I can't seem to get it downloaded alone. What am I doing wrong? I do not want the speed dial for sure. Don't know about the Xmarks.

Where did you download Firefox from?
The official Firefox download doesn't come with either of those addons.
http://www.mozilla.com/en-US/firefox/
or
http://www.mozilla.com/en-US/firefox/all.html

How to speed dial a number when accessing att voice mail

When I dial voice mail for my land line, it first asks for a password, then the phone number. Is there a way to speed dial a number like this?

Not that I'm aware of.

Since I upgraded version 4.0 my speed dial is not working porperly. I get the message 'XML Parsing Error: no element found Location: chrome://speeddial/content/speeddial.xul Line Number 1, Column 1:'

The speed dial works works sometimes but most of the times it does not. I am on Win 7 Home Basic.

The speed dial works works sometimes but most of the times it does not. I am on Win 7 Home Basic.

ISync 'Reset Device' resetting speed dial?

Hello, I am using an aftermarket plug-in to iSync with my SE w580i, as it is not officially supported by iSync, HOWEVER, I had this issue with my SE z520 which WAS supported officially by iSync, so I suspect that the plug-in is not at fault...
I have several numbers set up to speed dial, so I can press '1' (or any other numbers) and call, instead of having to enter the full phone number. I noticed with my old phone, and now with my new phone, that if I 'Reset Devices' (thinking that only my calendars and contacts will be reset), my speed dial gets reset and I have to reprogram it. In a way, I understand, as after the reset, the phone sees all new contacts, BUT if they have the same name, why is it a problem?

The "Reset Device..." command in iSync does exactly that - so any settings you've applied in the phone to specific Contacts (such as speed dials, custom ringtones, caller ID pictures) will also get wiped.
If you think about it, you assign a speed dial to a contact. Resetting the device wipes that contact, so the speed dial setting has no contact to be assigned to.
iSync is unable to retain (or even see/access) any of the custom settings you apply to contacts in the phone, so every time to reset the device you'll have to re-apply any custom settings.
This could also apply to changes to data within a contact, because Sony Ericsson phones don't allow a Contact to be modified over Bluetooth, so iSync has to delete the contact and re-send the edited one, thereby removing any custom settings applied to that contact in the phone.

How do you unlock a SPEED DIAL entry

Speed Dial 1 is for my voicemail, but I need to change the information and it won't let me do it. There is a "lock" icon to the right of the entry.

handymandf wrote:
This doesn't work. Using the enter or ok buttons only dials the number. And if I try the Menu key there is no option to edit or delete the entry like other speed dial entrys. The #1 entry is locked.
Correct.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

5800 - cannot speed dial and dial from handsfree c...

I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
Software: v11.0.008.red.01
Any clues?
Best regards,
Thomas
Message Edited by tez1 on 04-Feb-2009 11:52 AM

magpie68 wrote:
FIX...
I got this, I found out it happened when the number has spaces in it.
Try cleansing the number of all spaces and punctuation (and prefix with +country code)
This works for me.
Alan
Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

Unable to Edit Number Locked In Speed Dial Position

Similar Messages

Maybe you are looking for