Unable to edit properties in KM

Hello everyone,
This is my problem:
I have two navigation iviews A and B they both have exact same oject properties except the path to the initially displayed foder:
A looks in /documents/Public Documents/My Project/Dir A
and
B looks in /documents/Public Documents/My Project/Dir A/Dir B
The properties option (context menu > details > settings > properties) works for iview A (i.e. they appear as they should ready to be edited) but IT DOES NOT WORK FOR IVIEW B.
Please help .... i am stuck!
P.S. NW 2004, very recently installed SP17.
Thanks in advance
Dimitris

Hi Dimitris,
   I am trying to understand your problem:
you created two similar navigation iviews but point diferents folders.
   Now when you run these iview you do using layout set:
details-settings-properties, but in one of them you see the properties and the other you can not see it.
   Did you create these properties ?
   If you answer is yes, you define scope of them (recursive) ?
Patricio.

Similar Messages

Unable to edit user properties in SBS Console (2011)

Hello,
When attempting to edit properties for a user in the SBS Console, I receive the following error: "Attempted to perform an unauthorized operation." This only occurs when attempting to edit the user account properties for this single user.
I understand that this may be a scurity permission problem in Active Directory Users and Computers, but I do not know which permission entries would cause this. Is this where I need to look or is there another way to resolve this?
Thanks in advance.
Jeff

[13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
[13284] 120106.095830.3107: Storage: Initialize the quota manager.
[13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
[13284] 120106.095830.4667: Exception:
An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 01/06/2012 09:58:30
Message: Attempted to perform an unauthorized operation.
This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
permissions on this folder.
Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

Unable to edit slide properties - Edit is dimmed

Can anybody clue me in to why my Edit button would be dimmed? None of the slides are locked. By clicking on 'Select All', the Edit button activates, but of course then I can only edit all slides -
Can someone tell me how to remove media from a slide if I can't get to the Properties of the slide??
This is driving me nuts - why can't I edit properties of slides?
Attached a screenshot.
Thanks for the vent

Poregon,
That's okay...venting is good.
After looking at your screen shot, I'm wondering how you ended up w/ the Edit button at all. By default, the Slide Manager dialog box should have only showed the "Select All" button...and then, and ONLY then, the Edit button would have appeared. And for what its worth, the default functionality of the Slide Manager is to provide slide-by-slide adjustment to it's properties such as setting the slide title, advancing by user and locking a slide, just to name a few.
The Edit button (once you've selected more than one slide) will only allow you to modify the presenter's info, lock slide and advance by user options, so it's pretty restricted in terms of the parameters you can set over multiple slides.
And unless I'm completely wrong, as far as "removing media from a slide" is concerned, that's not something the Slide Manager is capable of doing.
What you're seeing in the listing of multimedia assets in the Slide Manager dialog box is simply a visual feedback element; meaning, that the Slide Manager is just visually identifying the kinds of things that your slides are using....like audio, animation and flash files. But if you want to manage those assets, you need to look in the appropriate places...like the Edit Audio or Edit Flash dialog boxes. In order to eliminate a flash file, all you have to do is go to the slide where the flash file exists and simply delete it from the slide. Same thing goes for animations; and since those are PowerPoint items, that's a simple matter of eliminating any custom animation applied to objects and elements on your slide(s). As for deleting audio, that's slightly tricker, because you have to use the Edit Audio dialog box....and from there you can cut audio or replace an audio segment with silence. In a worst-case scenario, you might find yourself having to delete the slide that contains audio you want to eliminate...only to recreate that same slide, so that you end up with a slide that doesn't contain any audio at all.
Hope that helps!
Rob
http://www.robrode.com/yabb/

Jdev 11g Production - Unable to edit EO/ VOs from Application Navigator

I created an ADF Model project. In this project I created ADF's 'Business Components from Tables' using the wizard. I went through the wizard and created EO, VO, AM and business diagram. After that, I was able to execute the AM (right-click and Run), but when I tried to open the EO or VO to edit properties (Right-click and Open), I was unable to do so.
I have created a word document with snapshots of the steps followed and the error I got. Please find it here - http://files.oraclecorp.com/content/AllPublic/SharedFolders/EBS%20Integrations%20Shared-Public/Errors_ADF_BC.doc
Any help is greatly appreciated. Thanks.

I suspect a usual useful drive-by-answer from dvohra.
user8028667, under JDev 11g you're right, it should be right click > Open (entity name). This should open the Entity Object document window.
Unfortunately the link you've provided appears to be internal to Oracle and can't be viewed by the vast majority of readers on this external Oracle forum. I'm guessing you're an Oracle employee because of the link you supplied. The Oracle JDev PMs normally point Oracle employees to post on internal forums, not external customer forums.
Regards,
CM.

Unable to edit ftpoutboundheader or fileadpateroutboundheader

Hi,
I am new bie to oracle soa suite. I was doing an excesise on file and ftp adapters.
As part of the excersise I have to edit the outbound header properties of the generated wsdl. I am unable to edit the headers.
1) Can we edit the headers generated by file/ftp adapter wizards ?
My SOA Suite: is of 10.1.3.4
Jdev version is 10.1.3.3
Thanks,
Arjun.

Try this blog
http://middleware1.wordpress.com/category/adapters/page/2/
cheers
James

Unable to edit info in itunes????

Hi,
I have recently got a new PC, and I am having problems with itunes.
Here is the details:
The hard drive which contains itunes music folder has been put into the new PC has a secondary drive.
I added folder within itunes and all my music is now there.
I am now unable to edit any of the information within itunes.
I right click on a track and select get info, and where I used to be able to edit artist name, track name etc is now just greyed out and I am unable to edit.
Can anyone please help with this
Cheers
Steve

The solution may be as simple as making sure the files have not become read-only during the xfer to the other drive. It happens sometimes when files go from DVD to hard drive or hard drive to network drive. Right-click a file, choose Properties, and remove any checkmark next to "Read-only." You can remove the checkmark from multiple files by selecting them all first, then right-clicking, choosing Properties, and clearing the "Read-only" box.

Unable to edit any old entity in Data Modeler

Hi,
I have a strange problem with Data Modeler 2.0.0.584 on Win XP. If you came across similar issue, please let me know how you solved it.
I have a logical model created several weeks ago. I can open the model without any errors, but I am unable to edit any object - when I double click on entity or relationship, the text in the property window is grayed out and I cannot change anything. I cannot change entity properties, nor add/change attributes.
The strange thing is that I can create a new entity or relationship, but once the object is created I cannot edit it.
I have checked that all files in the model folder are set as read/write but it did not solve the problem. At this moment I have no idea what else to check.
Thanks for any suggestion or help.
Regards,
Jakub

Thanks, that works!
- save as into another directory
- close Data Modeler
- start Data Modeler
- open the model from the new location
- and voila! I can edit all the entities!
Jakub

Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

Greetings, welcome to the Forums.
There's lots of detail you left out...
There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
What screencapture application are you using?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Express Vi "Unable to view properties"

I'm trying to create an express vi, but when I go to drop it on a block diagram I get the error: "Unable to view properties". I've seen the online document
"Placing an express vi causes 'unable to open properties' error" (http://digital.ni.com/public.nsf/allkb/9d2d226bb343372886256d6e007521f5
Rebooting does nothing, and I've tried the vi on multiple machines, so it isn't something wrong with a particular installation or vi.lib. I've looked through the vi hierarchy and didn't see any vi's that might have conflicting names as anything in the vi.lib\express\express shared folder.
Any suggestions?

Interesting. It was not what I expected.
In editing your Config Page VI, it looks like you (probably accidentally) deleted an indicator that came with it. There's nothing special about it other than its type, direction, name, and connector pane connection though, so it should be easy enough to fix. It is required for the config page to launch, however.
On the main config page VI, do the following:
Scroll down a bit to part that won't be visible to the user.
Drop a new boolean indicator, I'd suggest a Round LED.
Name this indicator "Data Valid".
Connect the boolean wire coming out of your main event loop (indicates the OK button was pressed) to your "Data Valid" indicator.
On the front panel, right-click the icon in the upper-right and "Show Connector".
Connect your "Data Valid" boolean to the unwired terminal.
Save the VI.
That should get you up and going, good luck!

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?

Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

User unable to edit contacts

I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?

Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to edit properties in KM

Similar Messages

Maybe you are looking for