Unable to edit protected network

hello guys. i am using Nokia N97 Mini mobile. whn i try to connect my Wifi connection at University. it says unable to connect.
when i try to add a new access point from Settings>Connectivity>Destinations>New Access Point
it checks for new connection and found the Wifi Router... but whn i select to add it in my list. i get Error message... " Unable to edit protected Network".
though the Wifi router is set to Open Network and its public.... still i cannot access it... whereas everyone else is enjoying the connection....
can anybody help me with this problem.. and tell me if there is any solution available other then reinstalling the Firm....Your help will be appreciated... please help me!!

@ sajjan
Delete your Uni accesspoint. Open the default browser, connect to the Uni accesspoint, you'll be redirected to a secure webpage to fill in your username and password.
@ jeandc
You have to set up a packet-data (gprs) connection as described on page 61 of the English manual.
http://europe.nokia.com/support/product-support/e7​2/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • User unable to edit document in protected mode until 'enable all features' is selected everytime.

    In light of the most recent vulnerabilities identified in version 10.1.1 and the instructions in -  http://www.adobe.com/support/security/advisories/apsa11-04.html
    to use protected mode, I have informed my customers how that should be performed. However, I have at least one user that is unable to edit their document until they select the ' enable all features' function. Even after they do that, and the specific file is listed in the in the security (enhanced) > priviledged locations list, the user is required to select 'enable all features' every time for this file.
    Can someone tell me a solution?

    >Where are you seeing the "enable all features function"?
    The notification bar at the top of the document

  • Unable to edit

    I am a complete novice to Dreamweaver so please bear with me.
    I am trying to edit some pages (.php files) for my employer. I was
    able to edit the index.php file but none of the others. All of the
    html code is greyed out except certain areas and unfortunately, the
    part I need to change is greyed out. I am completely unable to edit
    any of the greyed areas. I've looked all over to see if there's a
    way to unlock the code but I can't see anything. Does anyone have
    any suggestions?

    If you do not have the associated Template file, it *MAY* be
    a trivial
    matter to recreate it. We would need to see the code on the
    page to know
    whether that's possible, though.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Osgood" <[email protected]> wrote in
    message
    news:gecgtk$4g2$[email protected]..
    > This sounds as though the page has been made form a
    Dreamweaver template.
    > Do you have a template folder in the site root folder at
    all with a file
    > named .dwt in it?
    >
    > You can unlock the greyed out area of a page by opening
    it and
    > going>Modify>Templates>Detach Template.
    WARNING! WARNING! Doing this may
    > help you in the short term but once detached if anyone
    updates the
    > original .dwt template file the changes WILL NOT
    propagate to those pages
    > that have been detached from the template.
    >
    > First look for the .dwt file. It should be in the site
    root folder in a
    > folder named Templates. Open it if you can find it and
    make the changes
    > there. All changes made, once saved, will propagate to
    all pages in the
    > site made from the template.
    >
    >
    >
    > gwnyvere wrote:
    >> I am a complete novice to Dreamweaver so please bear
    with me. I am
    >> trying to edit some pages (.php files) for my
    employer. I was able to
    >> edit the index.php file but none of the others. All
    of the html code is
    >> greyed out except certain areas and unfortunately,
    the part I need to
    >> change is greyed out. I am completely unable to edit
    any of the greyed
    >> areas. I've looked all over to see if there's a way
    to unlock the code
    >> but I can't see anything. Does anyone have any
    suggestions?
    >>

  • Unable to access mapped network drive, DFS

    TL;DR: Unable to map a network drive on one particular computer, except if circumventing DFS.
    OK - So I have exhausted all my options in this matter, so all suggestions are welcome. 
    Keep in mind the file system is DFS.
    1. User has been set up the same as our other users in Active Directory.
    2. Most network drives are connected via GPO. They are mapped via\\company.local\common\
    3. The users' home folder is connected via setting in AD -> Profile -> Home folder -> 
    Connect X: To \\company.local\homedir\username
    4. When the user logs on, all network drives defined in GPO are mapped OK, but the X: which is defined via "Home folder" in AD, is not connected. When trying to map it manually, we get "Access denied".
    5. If the user tries the complete path via Explorer: \\company.local\homedir\username - Error 0x80004005 Unspecified error occurs. We have googled this particular code but found nothing that applies to us.
    6. If the user tries the complete path to the folder on the actual file server, circumventing DFS, the home folder is mapped OK.
    Strange thing is: This only happens on this particular computer. If users logs on to another computer, in the same domain, receiving the same GPO etc. The X: is mapped fine via \\company.local\homedir\username
    Also if another user logs on to the problematic computer they also cannot access their X: on \\company.local\homedir\username
    So we tried updating the WLAN/LAN drivers to no avail. Might there be any settings on the network adapters that might cause this?
    Kthxbai

    If other computer has the same policy ("Send NTLMv2 response only. Refuse LM"), it should not be the cause.
    I agree that all clients should have the same Group Policy but sometimes the group policy may not be applied correctly on a client which causes issues. Thus you can try a "gpupdate /force" and see if issue persists. 
    Also you can test to access \\company.local to see if it will success. Try \\rootserver as well if it is different as DFS folder target. 
    As the issue only occurs on a specific client, maybe we can have a try with re-join domain.
    If you have any feedback on our support, please send to [email protected]

  • Unable to edit info in itunes????

    Hi,
    I have recently got a new PC, and I am having problems with itunes.
    Here is the details:
    The hard drive which contains itunes music folder has been put into the new PC has a secondary drive.
    I added folder within itunes and all my music is now there.
    I am now unable to edit any of the information within itunes.
    I right click on a track and select get info, and where I used to be able to edit artist name, track name etc is now just greyed out and I am unable to edit.
    Can anyone please help with this
    Cheers
    Steve

    The solution may be as simple as making sure the files have not become read-only during the xfer to the other drive. It happens sometimes when files go from DVD to hard drive or hard drive to network drive. Right-click a file, choose Properties, and remove any checkmark next to "Read-only." You can remove the checkmark from multiple files by selecting them all first, then right-clicking, choosing Properties, and clearing the "Read-only" box.

  • Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

     i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

    Greetings, welcome to the Forums.
    There's lots of detail you left out...
    There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
    What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
    What screencapture application are you using?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Captivate 4-Unable to Edit or Save a Project

    Hi,
    I am creating a CBT using Captivate 4. There are two slides so far and the size of the project is 1,901 kb. One slide in the project has six click boxes with multiple actions and has five animations included in it which are hidden until the user clicks a click box. The concept works wonderfully, however, I am now unable to edit or save the project. I cannot finish it at this point. Captivate will not allow me to add any additional buttons, click boxes, highlight boxes, new slides and so on. It also will not allow me to delete any unused items from the library, or save the edits I made up to that point.
    I have tried the following, closing the project, closing Captivate and restarting my computer. I have also imported the slides into a new project with the same outcome. I have copied and pasted the slides into a new project with the same outcome. I have also tried to do a save as and it will not allow that either. There are no error messages. The project is not save on the network, it is on my C:Drive. I have had to restart the project several times and has this happened with each project. Any ideas would be greatly appreciated.
    Thanks
    Wendy

    click on the folder containing all these documents and do the following:
    Right click on the folder, then select "Get Info"
    Click the lock at the bottom to give yourself access to the permissions settings for this folder.  A dialog will appear so you can enter your login name and password:
    Now select your user name at the bottom (mine is wayne), set the read write permissions to "Read & Write" using the pop-up menu, then click the sprocket at the very bottom of the window and select "Apply to enclosed items..." from the pop-up menu.  The click the lock again.
    Now try to open your Numbers documents

  • TS1398 unable to join the network

    Just received new iPhone 5. It sees local networks but keeps giveing me the "Unable to join the network". How do I mannually join the network? Or reset the individual network to allow me to put in another password. The first time I set it up I entered the wrong password and not it will not let me put in another password. 
    iOS 6 and iPhone 5

    I was unable to join the network on my iPhone 5 as well and it turned out that I had incorrectly entered the password (fat fingers). My network was working fine on my other iDevices. Yes, you'll need to reenter the network password again and to do that:
    1) Go to WiFi under Settings
    2) Select the blue arrow at the right of your networks name under 'Choose a Network..."
    3) At top of page select "Forget this Network"
    4) Choose "Forget"
    5) Go back to WiFi
    6) Choose your network.
    7) Reenter Password!
    Message was edited by: Doc-

  • Windows Server 2008 - password protect network folders

    I was tasked to password protect a few folders that are being shared in the network.  The folders are stored in the server (that i have admin access) and anyone in the network have full access to the folders and the files inside those folders. The computers linked in the network have different OS - 3 running vista, 2 running xp and 1 windows server 2008.  Anybody in the office can use the computers without being prompted for a password (except the server) and the folders are accessible through any of those computers.
    The following are my questions:
    1. Is it possible to password protect folders shared in the network? If so, if someone wants to access those password protected folder through any of the computers connected to the network, will they be prompted to enter a password to be able to access it or the system will just say "access denied?" If so, please give detailed instructions on how to do it.
    2. If it is possible to password protect network folders, is it possible to put different passwords on each folders? If so please give detailed instructions on how to do it.
    3. If it is not possible to do any of the mentioned above through windows, is it possible with the use of a third-party software? If so, what are those third party software?

    Hi All,   First time on this forum and am finding it very interesting (sorry about the proposed as answer above.. hit the wrong key).
    I found this topic particularly interesting and am looking to do a similar thing but seemed to have gotten around it quite easily (if I am on the same lines as greggync777 that is).
    My problem is this I have a Home Theatre Network set up in my lounge to several locations around the house with around 8 gb of videos/music/pics etc, all works fine on connected pc's with WMC (all using Windows 7) and all is shared by family for entertainment.
    I also have a Seperate workstation where I do my work (video editing) which involves storing considerable amounts of footage and more importantly all the work files/folders all of which is confidential, at the moment is also on a seperate pc which also houses 8 hdd with around 6gb of ever growing video information.
    My point is that both these PC's ( HTPC and my WORKSTATION) are a bit too noisy despite having installed the best I can afford fans/Samsung eco green hdd's. My desire is to build a main super server running WHS 2008 (The size/Cooling/Noise etc is not a problem due to where it will be located). My main concern is Security with so many in the family having direct access to the Server so I want to restrict which files/folders they can subsequently access once there.  I want to be the only one to have access to my work from my PC and everyone else denied access.  I have set up a test rig running WHS08 and have set up access with several PC's using passwords for the server etc which was straightforward after creating a user account for them on whs08, therein laid the problem of then how to keep them from accessing my side of the server which is when I hit up on this thread after much searching. Following one of the suggestions above I went to the folder in question (in my case this will be a plus as all my work will be in one main folder with several thousand sub folders) to the security tab/permissions etc and firstly removed access to everyone except the server administrator. I then granted access only to one PC on the network - the one that is my workstation together with a password ( I meant to say upto this point everyone I had given access to the server could access my test folder), went back to my PC and was able to access as normal after entering the password. I then went to every other PC on the network (that has access to the Server) where I am pleased to say all denied me access to my folder. (my work pc by the way is running XPsp3). Not sure if it will work for Greggync777 or if it what he is looking to do but it did for me. I apologise also if I have rambled on a bit for my first thread.
    tks   Dave

  • NOKIA N8 - Unable to connect - WLAN Network not fo...

    also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

    Well, I seem to have issues with WLAN as well.
    When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
    So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
    Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
    P.S.: Tthere is another thread reporting similar problems. Here is the link.

  • Author of the document unable to Edit the .Ptxt

    Encrypt the TXT file with NATIVE file encryption by using RMS Sharing Application.
    Open the Encrypted .ptxt file by Author, document is opened, but unable to EDIT the document even with the author

    I think it's just that the interface doesn't have any text editing capabilities.  It's basically the same situation with the supported image formats. Do you have the option under Protect-in-Place to unprotect it?

  • Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

    Hai ,
        i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
    "C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
    if pressed ok . aplication get closed
    i reinstalled all aplication with old versions but sill have the same error .please give  a solution . thank you.

    thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
    Also, this is only for regular PDF files, not forms.

  • I am unable to edit an image in Photoshop.

    I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

    Chris:
    I have to apologize for being misleading on my request for help in
    resolving the problem.
    Actually the version I am using is CS2 not CS3.
    Yesterday I tried numerous times, and ways, to edit an image and each time
    it refused to allow me to save it.
    The software program just shut down. This evening when I decided to give it
    another try it worked perfect.
    Guess the program just took the day off.
    Thank you for offering to help
    Regards,
    Doug

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

    Dear experts,
    I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
    However, when I try to enter selection I_THX_SEL, it tells me:
    Unable to edit the object
    Message no. MO704
    Diagnosis
    You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
    The object is an object reference
    The object is a hashed table
    The object list a string
    The object has the type REF TO DATA
    The object contains object references
    The object contains hashed tables
    The object is a string
    The object contains strings
    A subcomponent of the object has a width that exceeds 65,000 characters.
    Can anyone tell me how to make it work?

    Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

Maybe you are looking for