Unable to edit quota in pipe line performance management

Hi Guys,
When I am accessing quota planning from PPM and clicking on edit button in action it is taking me to quota planning screen but nothing is enabled?Where could i have gone wrong?Is any setting missing/authorization issue?Am logged with Sales pro business role?
Pls give any inputs.
Regards
Jaya

Hi Ryan ,
Could you please share the file with us so that we can test at our end and get back to you with an appropriate solution.
Please share the file on [email protected]
Regards
Sukrit Dhingra

Similar Messages

  • Unable to get the employee name in performance Management

    Hi All,
    I am facing problem with Performance Management in My Employment. Unable to see the employee name in PM docs to approve by manager.But same user is able to see in Backend under manager who has to be approve..Please assist to go further. Is there anything need to be done from portal side.?
    Thanks & Regards,
    Kumar. V.

    Hello Sainth,
    In Webi Prompts..you can see the "Key icon" click on that icon..it will show both text and key..it will helps you to run the report based on the Key..
    Regards,
    Naveen D

  • Urgent: Unable to Edit Modifiers to Order Lines.

    Guys,
    Modifiers are defined correctly for order lines.
    "Override" checkbox exists for all item categories.
    Profile "OM: Discounting Privileges" to "Full"
    "Enfore Price List" is not checked for the order type.
    All price list,Transactions types and modifiers are active and has no end date.
    Ran
    Build Attribute Mapping Rules
    QP: Maintains the denormalized data in QP Qualifiers
    Any others setups I missing?
    Cheers!!!

    911669 wrote:
    Guys,
    Modifiers are defined correctly for order lines.
    "Override" checkbox exists for all item categories.
    Profile "OM: Discounting Privileges" to "Full"
    "Enfore Price List" is not checked for the order type.
    All price list,Transactions types and modifiers are active and has no end date.
    Ran
    Build Attribute Mapping Rules
    QP: Maintains the denormalized data in QP Qualifiers
    Any others setups I missing?
    Cheers!!!You mean..when you go for view adjustments at line level..you are not able to see modifers there??

  • Spend Performance Management - Quick link

    Hi All,
    Am unable to delete quick link in Spend Performance Management post upgrade(from 2.0 to 3.0). When clicked delete option in Administration -> Quick Links Configuration, the link is getting populated once again after refreshing the page.
    Please help if the quick link needs to be deleted from any other location.
    Thanks,
    Preetha Balan

    Hi Preetha,
    I tested this again in my lab. I was able to delete the links from the UI. (It surprised me by taking effect right away.) I logged out/in and my changes persisted as expected.
    If the process using OK/SAVE is not working for you – I would have to guess a good place to start is by reviewing authorizations. I would go so far as to assign the user all five standard SPM roles, if that user can do it then it is an authorization issue.
    Here are the five SPM roles by name:
    SAP_SPM_TRANSPORT
    SAP_SPM_USER
    SAP_SPM_ADMINISTRATOR
    SAP_XSA_DATA_MANAGER
    SAP_XA_SS_OWNER
    See Chapter five in the security guide for more details.
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support,
    SAP America, Inc., 1001 Summit Blvd, #2100, Atlanta, GA 30319, USA

  • Unable to see pipe line steps in the SXMB_MONI

    HI,
    i have done the development and quality work for my p i7.1
    i was testing the messages in the Quality System.
    So i went to SXMB_MONI to see the messages.
    After double clicking on the  successfully processed message, it shows
    pipe line steps.
    in that I am able to see
    1.inbound message(CENTRAL)
    2.XML Validation inbound channel Request
    3. call adapter
    4. Response
    but i am unable to see
    1. Receiver Determination
    2. Interface Determination
    3. Receiver Grouping
    4. Request Message Mapping
    5. Technical Routing
    whereas  in the develoment system i am able to see the above all.
    is there any configuration i have to do in the SXMB_ADM?

    can i know that   Configuration objects were created/ imported by using transport mechanisum?
    if created ,
    check the cache status and re activated those objects whatever u r posted in thread.
    if transported :
    u ll follow ,whatever posted by Earlier

  • Unable to edit unposted journal lines

    Hi All,
    I am facing an issue when transferring and editing some costs from Projects to GL.
    Here are the steps:
    1/ I created some expenditure items in Projects.
    2/ I then executed concurrent programs PRC:Distribute Labor Costs, PRC:Generate Cost Accounting events and PRC:Create Accounting (Final) - transferred to GL (but not posted yet).
    3/ Switched to GL responsibility and reviewed the journal only to find it is locked for editing.
    I was able to create an invoice in AP, transfer to GL and then edit the unposted journal line.
    However I am not able to do this with projects (labor cost).
    Any idea what I could be missing or doing wrong?
    Appreciate any help from you on this matter.
    Thanks,

    Hello.
    Navigate to Setup/Journal/Sources and check if that the source in question is frozen.
    Octavio

  • Unable to edit Today tab in Notifications

    My wife and I just received the iPhone6 (verizon). Both of us are unable to edit the Today tab in Notifications.  There is no edit button to remove notifications or widgets.  When you go to Notifications under settings, there is no "Today" section to edit.
    Specifically, we would like to remove Stock quotes from the today tab.  But, the Stocks app is not listed to even be able to edit.
    For some reason, the Stock quotes show on my wife's phone under the Today tab, but not on mine.
    Any assistance appreciated.

    Hi there mwlevey,
    I see that you have some questions about the Today tab in your Notifications center. I have a link that should be able to explain how to accomplish the goal you have stated in your post:
    Notification Center - iPhone
    http://help.apple.com/iphone/8/#/iph6534c01bc
    Set Today options. To choose what information appears, tap the Edit key at the end of your information on the Today tab. Tap + or — to add or remove information. To arrange the order of your information, touch ,then drag it to a new position.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Unable to edit maintenance plan Sql Server 2008R2

    Hi All,
    I am unable to edit sql server maintenance plan and it is failing continuously from job as well.When I try to open the same the throws an error:
    Microsoft SQL Server Management Studio is unable to load this document.:
    Error loading from XML. No further detailed error information can be supplied for this problem because no Event objects was passed where detailed error information can be stored. It used to work pretty well in the past.Throws same error when I try to connect
    remotely.
    Regards
    Rahul

    Has the MP been developed in SQL Server 2008r2 as well?
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Unable to edit shopping in hold status

    Hello,
       I created a shopping cart and put it on hold.Shopping cart is created with errors.Now i want to correct the errors.
    But i am unable to edit it.its an extended classic scenario.
    Am i missing anything.
    I am new to SRM
    Could someone please help.

    Hi
    For SRM 550 , Go to check status --> Reach to the bottom of Screen and edit the cart using CHANGE button
    For SRM 7.0- You will ve to use POWL , Edit button may be disabled in POWL due to performance reason. Open the cart in detail mode and hit EDIT to change the held cart.
    From your problem description, you seem to be on SRM 5.0
    Regards
    Virender Singh

  • Unable to edit Distribution Group membership via Outlook (works via ECP).

    SITUATION: I am attempting to enable the ability for specified users to edit the membership of Exchange 2010 distribution groups via Outlook 2010.  I have configured permissions via RBAC for them to be able to do this by following the instructions and
    running the script found here:
    http://msexchangeteam.com/archive/2009/11/18/453251.aspx
    After running the script, users specified as group managers are able to edit group membership through the ECP.  But when they attempt to do so via Outlook, they receive the same message that they would see if the permission to edit group membership
    was not enabled:
    "Changes to the public group membership cannot be saved.  You do not have sufficient permission to perform this operation on this object."
    QUESTION:  Does anyone have any idea as to why we are still unable to edit group membership via Outlook, when all the permissions appear to be enabled doing so?

    Click Start
     Collapse this imageExpand this image
    , point to All Programs , point to Exchange Server 2010 , and then click
    Exchange Management Shell .
    At the command prompt, run the following cmdlet:
    New-RoleGroup DistributionGroupManagement -Roles "Distribution Groups"
    At the command prompt, run the following cmdlet:
    Add-RoleGroupMember DistributionGroupManagement -Member <var>UserName</var>
    Open Outlook and try to remove from your distribution list those members that you could not remove before

  • Quick Poll Greyed Out  - unable to edit

    Hello,
    We have a series of quick polls assigned to individual campaigns and all are 'ongoing'.  These are then assigned to KM IViews and assigned to users via roles etc.
    Last week we were able to edit the quick poll, editing the text, participants etc but for some reason we are now unable to.
    I've logged in as administrator and checked permissions etc but still unable to edit.
    There are no locks pending in the portal.
    any idea what the issue could be?
    thanks
    Simon.

    Hi ezadler,
    Did this issue only haapen to this one particular list?
    Please check if there are more related ULS logs in 15 hive.
    And also try saving this library as a template and create a new libarary based on it, then check if issue still exists, then change the "multiple lines of text" type
    Enhanced rich text to
    Rich text (even Plain text) if possible, then check again.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

     i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

    Greetings, welcome to the Forums.
    There's lots of detail you left out...
    There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
    What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
    What screencapture application are you using?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to edit a Table Cell. Help required.

    Hello Folks,
    Please I need some help.
    I have a java class which allows a user to enter and delete
    data into a table dynamically.
    So the user can enter any number of rows and once he clicks on the
    concerned row, he can also delete that row.
    I just have one small problem.
    I am unable to 'edit the cell'. i click on.
    can any one please help me on this. I'd like to send this class
    file.
    Can any one please send in their email address so I can attach this file
    Please some one respond.

    Hv u used something like this. What table model u r using. I hv used DefaultTableModel.
    c this piece of code: This might help.
    tblView = new JTable(model)
                   public boolean isCellEditable(int r,int c)
                        try
                             if(r == 0)
                                  return true;
                             else
                                  return false;
                        catch(Exception e)
                             apilError.createErrorLog(e,"Error1 class Bank_Reconciliation.java, in Constructor line no 194");
                             CallErrorMessage(apilError.systemerror,2,"Error");
                        return false;
                   public static final int a1=0;
                   public static final int a2=1;

  • User unable to edit document in protected mode until 'enable all features' is selected everytime.

    In light of the most recent vulnerabilities identified in version 10.1.1 and the instructions in -  http://www.adobe.com/support/security/advisories/apsa11-04.html
    to use protected mode, I have informed my customers how that should be performed. However, I have at least one user that is unable to edit their document until they select the ' enable all features' function. Even after they do that, and the specific file is listed in the in the security (enhanced) > priviledged locations list, the user is required to select 'enable all features' every time for this file.
    Can someone tell me a solution?

    >Where are you seeing the "enable all features function"?
    The notification bar at the top of the document

  • Unable to edit listener gateway settings

    I am unable to edit listener gateway settings. The response is you do not have enought privilages to perform this operation.
    I have tried using both dad_admin and sso_admin users both have failed. How should i proceed.
    Any help would be appreciated.
    Thanx
    Vinodh

    Have You tried to log into the portal as DAD (default portal30). Under administer tab, there is a portlet Listener Gateway Settings (http://<host:port>/pls/portal30/admin_/gateway.htm). Then the second link (http://<host:port>/pls/portal30/admin_/dadentries.htm) leads You to a list for "Database Access Descriptor Name"s.
    Hope this helps
    Michael

Maybe you are looking for