Unable to edit SMS in Nokia E6

Is there a possibility to edit and re-send a sent SMS???
When I open this message I have the following options:
Forward and Move to folder.
And I need to correct the text and resend it to the same recepients.
Thanks.
P.S.:
I'm an avid supporter of Symbian but I think E6 will be my last Nokia Phone. (I had 6680,6681,N70,N73,E71 etc...)
I was frustrated by several failed attempts to update software, then my contacts were deleted after sync, my battery life is awfull, wi-fi fails to connect, Exchange not working etc...

Sorry, not trying to be offensive. Here's an example from Thunderbird:
http://booki.flossmanuals.net/thunderbird/reading-​and-organising-mail/static/Thunderbird-view_mail-v​...
Look for 'edit as new' button. It does exactly what is says - opening any message in editable mode keeping both text and recipients.

Similar Messages

  • Unable to read sms in Nokia 5800

    I bought a Nokia 5800 last year. It was working perfectly fine but since yesterday I am unable to read smses as when I click on the message, the touch is recognized but the message does not open. The new message notification as well as all the other features are working perfectly fine. The s/ w version that I have updated is v50.0.005, s/w version date 23-03-2010 and custom version (50.0.005.C02.01) is 26-03-2010

    First, clean out your messages. If you recently updated your firmware I suggest you reset the 5800. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Unable to edit protected network

    hello guys. i am using Nokia N97 Mini mobile. whn i try to connect my Wifi connection at University. it says unable to connect.
    when i try to add a new access point from Settings>Connectivity>Destinations>New Access Point
    it checks for new connection and found the Wifi Router... but whn i select to add it in my list. i get Error message... " Unable to edit protected Network".
    though the Wifi router is set to Open Network and its public.... still i cannot access it... whereas everyone else is enjoying the connection....
    can anybody help me with this problem.. and tell me if there is any solution available other then reinstalling the Firm....Your help will be appreciated... please help me!!

    @ sajjan
    Delete your Uni accesspoint. Open the default browser, connect to the Uni accesspoint, you'll be redirected to a secure webpage to fill in your username and password.
    @ jeandc
    You have to set up a packet-data (gprs) connection as described on page 61 of the English manual.
    http://europe.nokia.com/support/product-support/e7​2/guides
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • 6230i - Unable to edit voice mailbox number

    I am unable to edit my voice mailbox number, the operation is "Not Allowed" has stated by my phone.
    I have resorted to adding the voice mailbox number to my phonebook and assigning it another speed dial number.
    Any suggestions for unlocking the correct feature?

    I have this problem too. I've just changed my contract to a new operator. They tried to send a service message to update the mailbox number but this failed. I am also unable to manually enter the number as with the user above.
    I spoke to Nokia yesterday and they advised me to visit a Nokia Care Provider (carphone warehouse) to update the firmware. I've done a search or two and it seems this is a known issue with v3.70 firmware, which I have had on my phone since I bought it about 3 years ago.
    So I went to Carphone Warehouse today and they said they would charge me £44 for the privilege of updating the firmware of the phone. That's got to be wrong. To my way of thinking, either Nokia or the Carphone Warehouse (who sold me the unit initially) should take responsibility for ensuring the goods they sell are in proper working order. So how can I get my firmware updated?

  • Unable to edit photos

    After hard reset, I am unable to edit photos as the EDIT tab is no more. Opening user guide and clicking PHOTO EDITOR gives a message - UNABLE TO OPEN APPLICATION.
    What has probably gone wrong?

    Hi N8pairfail,
    Thanks again for your feedback,
    Please contact a Nokia Care Point to have them rewrite the phone software for you. Please use Nokia Suite to create a complete backup (through Tools/Backup) of your phone before you do though as this action will completely erase all content from your phone. When asked deselect the option to include settings in the backup.
    You can restore the backup when you return from the Care Point after which you can also re-install your apps from Nokia Store. Your will find your paid apps here.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Edit Phone details Nokia 5070

    I recently upgraded my phone but have been unable to edit my phone details on My Nokia as my new phone – Nokia 5070 – does not appear on the drop down list. Why is this?

    The site that you are refering to still needs to be updated to contain the 5070 in it's dropdown.
    Experience and persistence are second to none just ask user one.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question...

  • Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

    Hai ,
        i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
    "C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
    if pressed ok . aplication get closed
    i reinstalled all aplication with old versions but sill have the same error .please give  a solution . thank you.

    thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
    Also, this is only for regular PDF files, not forms.

  • HT3529 i am unable to send sms from my iphone 4s

    i am unable to send sms from my iphone 4s

    Try Settings > General > Reset > Reset Network Settings.
    If that does not resolve, SMS is a carrier feature, contact the carrier.

  • I am unable to edit an image in Photoshop.

    I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

    Chris:
    I have to apologize for being misleading on my request for help in
    resolving the problem.
    Actually the version I am using is CS2 not CS3.
    Yesterday I tried numerous times, and ways, to edit an image and each time
    it refused to allow me to save it.
    The software program just shut down. This evening when I decided to give it
    another try it worked perfect.
    Guess the program just took the day off.
    Thank you for offering to help
    Regards,
    Doug

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

    Dear experts,
    I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
    However, when I try to enter selection I_THX_SEL, it tells me:
    Unable to edit the object
    Message no. MO704
    Diagnosis
    You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
    The object is an object reference
    The object is a hashed table
    The object list a string
    The object has the type REF TO DATA
    The object contains object references
    The object contains hashed tables
    The object is a string
    The object contains strings
    A subcomponent of the object has a width that exceeds 65,000 characters.
    Can anyone tell me how to make it work?

    Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

  • WebElements - Unable to edit WEPlatform

    Hi,
    I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
    I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
    I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
    Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
    Any help will be great.
    Cheers,
    Matt

    hi Matt,
    the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
    as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
    once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you  build a new report using webelements you don't have to keep changing the platform function each time.
    jamie

  • User unable to edit contacts

    I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
    Do you want to save a copy of this item in the default folder for the item?
    I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
    No other users report the problem, and loading the users account on another computer demonstrates the same problem.
    Any ideas what I am missing?

    Hi,
    The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
    If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
    Add-MailboxPermission -Identity "xxx" -Owner "xxx"
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

    Hi Team,
    Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
    Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
    Can somebody confirm this as I am not 100% sure about it.
    Appreciate your help. Thanks
    Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

    Hi,
    The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
    Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
    The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
    A URL configured by the user
    More details:
    http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Unable to edit

    I am a complete novice to Dreamweaver so please bear with me.
    I am trying to edit some pages (.php files) for my employer. I was
    able to edit the index.php file but none of the others. All of the
    html code is greyed out except certain areas and unfortunately, the
    part I need to change is greyed out. I am completely unable to edit
    any of the greyed areas. I've looked all over to see if there's a
    way to unlock the code but I can't see anything. Does anyone have
    any suggestions?

    If you do not have the associated Template file, it *MAY* be
    a trivial
    matter to recreate it. We would need to see the code on the
    page to know
    whether that's possible, though.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Osgood" <[email protected]> wrote in
    message
    news:gecgtk$4g2$[email protected]..
    > This sounds as though the page has been made form a
    Dreamweaver template.
    > Do you have a template folder in the site root folder at
    all with a file
    > named .dwt in it?
    >
    > You can unlock the greyed out area of a page by opening
    it and
    > going>Modify>Templates>Detach Template.
    WARNING! WARNING! Doing this may
    > help you in the short term but once detached if anyone
    updates the
    > original .dwt template file the changes WILL NOT
    propagate to those pages
    > that have been detached from the template.
    >
    > First look for the .dwt file. It should be in the site
    root folder in a
    > folder named Templates. Open it if you can find it and
    make the changes
    > there. All changes made, once saved, will propagate to
    all pages in the
    > site made from the template.
    >
    >
    >
    > gwnyvere wrote:
    >> I am a complete novice to Dreamweaver so please bear
    with me. I am
    >> trying to edit some pages (.php files) for my
    employer. I was able to
    >> edit the index.php file but none of the others. All
    of the html code is
    >> greyed out except certain areas and unfortunately,
    the part I need to
    >> change is greyed out. I am completely unable to edit
    any of the greyed
    >> areas. I've looked all over to see if there's a way
    to unlock the code
    >> but I can't see anything. Does anyone have any
    suggestions?
    >>

Maybe you are looking for